gneiss15
7ba596a5fe
Add wifi kit 8 to boards ( #8190 )
...
* Create pins_arduino.h
* Update boards.txt.py
* Update boards.txt
* done a "boards.txt.py --allgen"
* Removed the definition of LED_BUILTIN from variants/wifi_kit_8/pins_arduino.h, because this board has no build in lED
2021-07-03 23:33:20 +02:00
Earle F. Philhower, III
60fe7b4ca8
Add code-spell spelling checks to CI ( #8067 )
...
Help find and fix silly spelling errors as they are added to the repo.
2021-05-23 08:53:04 -07:00
Foddis Gabriele
d41b4037cc
board manager: + Agrumino lemon v4 ( #7883 )
2021-02-19 08:21:16 -08:00
DanKoloff
b706fd4d59
I2C pin assignment fix ( #7416 )
...
There was a typo in I2C pin assignment, SCL was set to GPIO #4 instead of GPIO #14 , The schematic can be seen here: https://github.com/OLIMEX/ESP8266/blob/master/HARDWARE/MOD-WIFI-ESP8266-DEV/MOD-WiFi-ESP8266-DEV%20revision%20B1/MOD-WiFi-ESP8266-DEV_Rev_B1.pdf
2020-06-30 18:14:43 +02:00
schirmilabs
0554d39c6c
Add support for my new board eduino wifi ( #6554 )
...
* ^#
* Fix merge conflict
* Fix merge conflict
Co-authored-by: Earle F. Philhower, III <earlephilhower@yahoo.com >
2020-02-26 08:15:57 -08:00
M Hightower
0c6be9e114
Made changes to include "ESP8266_" with ITEAD board names, {build.board}, ( #7024 )
...
as proposed by https://github.com/esp8266/Arduino/pull/6972#issue-358508056 .
@ttytyper 's changes have been incorporate into this PR
The build flag ARDUINO_SONOFF_... should now appear as ARDUINO_ESP8266_SONOFF_...
@ttytyper, @mcspr, and @d-a-v thanks!
2020-01-27 14:44:08 -08:00
Erdem UNCUOĞLU
1d052834a4
fix for #6904 : NodeMCU v1.0 board option "Builtin Led" not working. ( #6905 )
2019-12-12 14:51:49 -03:00
Develo
dde76d1b5d
Puts to rest the confusion about the builtin leds for nodemcu boards ( #6743 )
...
Given that most nodemcu boards are based on the ESP12 boards, the definition of the builtin led is now changed to 2.
In addition, for those nodemcu boards that have an additional LED on the board connected to gpio16, an additional define is added called LED_BUILTIN_AUX.
2019-11-10 02:01:02 -03:00
M Hightower
9f6d3c7c3e
Add board filter support ... ( #6643 )
...
* Add boards filter support - allows for the creation of an abridged boards.txt.
Add some of the ITEAD Sonoff boards to boards.txt.py.
Minor reorder of presentation of board menu items, mainly grouped
board Model and module selection to the top.
* Corrected, I think, LED_BUILTIN vs BUILTIN_LED??
* Updated boards.txt
* Added support for DOIT ESP-Mx DevKit (ESP8285) board.
Adjusted wording and fixed side bar formating issue on the
Sonoff description. Also, removed resetmethod menu
and assigned resetmethod of none.
2019-11-08 14:49:29 -03:00
david gauchard
82487e5d96
boards: Invent One: fix analog pin ( #5741 )
...
fix #5740
2019-02-08 12:37:44 +01:00
Alwin Arrasyid
ca3678f7c1
ESPectro Core board support ( #5419 )
2018-12-03 15:27:06 +01:00
david gauchard
92373a9837
Deprecate axTLS, update examples ( #5366 )
...
* update examples
* fix serial<->tcp example, use STASSID instead of SSID (name collision)
* fix HTTPSRequest.ino
* update AxTLS HTTPS examples, update AxTLS API to deprecated
* fixes
* fixes + fix astyle (no preproc directives) + restyling script
* fix HTTPClient library
* fixes
* common.sh: do not reload arduino when already present (for locally CI testing)
* common.sh: do not reload ArduinoJson when already present (for locally CI testing)
* fix
* fix
* fix deprecated example
* fix WiFiHTTPSServer.ino
* reduce footprint
* wipfix
* fix led builtin
* fix example
* finished updating APSSID on all examples
* style
* restyle examples
* helper to run CI test locally
* local CI runner more verbose
* +const
* deprecation deprecation
* deprecation
* Update NTPClient.ino
const char[] => const char *
* Update interactive.ino
const char[] => const char *
2018-11-29 20:49:27 -08:00
Invent Victor
d7ca884007
support new board (invent one) ( #5286 )
...
* add inventone to boards.txt.py
* add inventone pin mapping .h file to variants
* generate files running boards.txt.py via Python2
* delete .orig files
2018-10-28 15:44:31 -03:00
Evgeny Kochetkov
3c13751bcf
Fix NUM_ANALOG_INPUTS for Amperka WiFi slot ( #5219 )
2018-10-09 08:48:45 -07:00
George
83a50d649d
Update ESPduino pin definitions ( #4828 )
2018-10-04 19:08:42 -07:00
Earle F. Philhower, III
bc2d4ec18b
Allow GPIO 9 and 10 for waveform generation ( #5055 )
...
* Allow GPIO 9 and 10 for waveform generation
While most ESP8266 modules use quad-io mode for their SPI flash ROM,
there are some which only use dual-io mode. Allow the unused pins
(GPIO 9 and 10) to have waveforms generated on them. Should the user try
this on a quad-io mode board, expect very bad things to happen.
* Add variant for 8285 to init GPIO 9/10
The 8285 only has 2-bit flash IO, so the other two pins can be used as
inputs (9/10). Set them to input to mirror the way other pins are set
up.
* Update waveform gen to only allow 9/10 on 8285
Update the common.h in both generic (remove TODO, it's done!) and the
8285 variant to make isFlashInterfacePin macro correct. Use that macro
to disable pins 9 and 10 in the common, non-8285 case.
2018-09-17 22:58:06 -03:00
Jack Shao
3906ee4d91
Add support for Seeed Wio Link board ( #4943 )
2018-07-20 14:51:32 -04:00
brendanvanbreda
e5648f3dfd
Add support for XinaBox ( #4929 )
...
Add support for the XinaBox CW01;
2018-07-17 11:53:26 -07:00
acosinwork
9c5c16e9c8
add board WiFi Slot ( #3916 )
2018-06-04 18:42:11 +02:00
acosinwork
ab7e109e4c
A0 pin number can be changed in the variants ( #4778 )
2018-05-31 14:23:32 +02:00
david gauchard
b93cba1046
simple fixes ( #4597 )
...
* wemos d1 r1: move comment out of define line
* update 4M filesystem info
2018-04-03 01:58:22 +02:00
i3water
7ae8f98e57
add board WiFiduino ( #4590 )
2018-04-01 18:51:59 +02:00
Marco Bisioli
e1ca870695
defined SDA and SCL pins for Olimex MOD-WIFI-ESP8266(-DEV) ( #4562 )
2018-03-26 22:47:11 +02:00
david gauchard
d0f220fb54
fix board common variant inclusion for deprecated BUILTIN_LED ( #4366 )
2018-02-16 22:40:25 -03:00
david gauchard
4caf4878c7
LED_BUILTIN should be a #define ( #4276 )
...
* LED_BUILTIN should be a #define
deduplicate and hide BUILTIN_LED as a deprecated constant
* test for LED_BUILTIN existence
* board:espino:variant: rename button macro (naming coherence)
2018-02-07 10:42:57 -03:00
Christopher Hiller
87b9097399
add missing constants to variants/oak
2018-01-22 23:25:35 -08:00
david gauchard
28253c5bd3
boards.txt generator ( #3722 )
...
+ generates boards.rst
+ generate and replace boards section in package.json
+ generate ldscripts
+ new debug option: OOM
+ new led menu for generic board
2018-01-08 11:06:01 -03:00
Christopher Hiller
3f5d06bc12
add DigiStump Oak pins & board
2017-08-21 11:10:55 -05:00
Sergio Tomasello
a9224266f3
Arduino boards with ESP8266 ( #3121 )
...
default crystal freq 26M for all boards, 40M for arduino
2017-04-11 10:19:30 -05:00
Kristian Sloth Lauszus
6d6f22e6be
Add PIN defines, so the pins can easily be used by external libraries
...
See: arduino/Arduino#4814
For instance this is used by the USB Host library: 231fb542a8
2016-10-26 01:29:14 -05:00
Nat
222e92a5fc
Add new boards Phoenix 1.0 & Phoenix 2.0 ( #2088 )
...
* Add new boards Phoenix 1.0, Phoenix 2.0
* ESP8266HTTPClient: fix duplicate Content-Length headers (#1902 )
* Add new boards Phoenix 1.0, Phoenix 2.0
* Add phoenix in variants.
2016-06-06 12:20:41 +08:00
Ivan Grokhotkov
0f719e8d0d
Clean up variants, fix digitalPinHasPWM definition ( #1831 )
2016-03-29 18:31:05 +03:00
Nat Weerawan
a0454787b7
Add pre-defined ESPRESSO_LITE_VERSION
2016-03-10 12:08:31 +07:00
Ivan Grokhotkov
0550e7283f
Merge pull request #1608 from narongrat/master
...
Add ESPino (WROOM-02) by ThaiEasyElec.com
2016-02-10 19:22:28 +03:00
Narongrat Srimee
708c7823df
Add LED_BUILTIN definition #1556
2016-02-08 20:18:27 +07:00
Nat Weerawan
5dc34d1f95
- Update board and filesystem detail.
...
- use LED_BUILTIN instead of BUILTIN_LED.
- update package_esp8266com_index.template.json file.
2016-02-08 19:31:58 +07:00
Nat Weerawan
b01a766d17
Add ESPert ESPresso Lite to boards.txt & variants
2016-02-08 18:39:07 +07:00
Narongrat Srimee
0db198ed68
Create pins_arduino.h for ESPino (WROOM-02)
...
Create pins_arduino.h for ESPino (WROOM-02) by ThaiEasyElec.com
2016-02-08 18:17:03 +07:00
Alex
573a0fb47f
Add LED_BUILTIN definition ( #1556 )
...
keep arduino incompatible BUILTIN_LED (+22 squashed commits)
[e124f9c18dab660095de6cca2714ff62bfbfd6f7c0220b02ab871b1b1d97cacebc26677008a27cf3f6da5e11c438645bd5faae742df2659b1eb74d5fb9e977b735737d0557dda25e4aa7865ace
2016-02-04 17:44:17 +03:00
yichone
70d0339813
Merge branch 'master' into master
2015-12-28 09:42:48 +08:00
xsyp
6d87ef5aa9
Add espduino board
...
ESPDuino boards from doit.am (arduino uno look like board for esp8266)
2015-12-27 17:15:49 +08:00
wemos
16244c5dfd
fix d1_mini board.
2015-12-27 14:36:22 +08:00
hallard
5653b9a59b
Merge remote-tracking branch 'refs/remotes/upstream/master'
2015-12-11 18:04:41 +01:00
Rodrigo Mendez
e3137a0b55
added ESPino to supported boards
2015-12-04 18:24:08 -06:00
Charles
3e20239790
Added WifInfo boars with ESP module choice
2015-11-30 11:49:13 +01:00
wemos
4568d9e42a
add wemos D1 & D1 mini boards
2015-11-08 13:31:18 +08:00
Ivan Grokhotkov
a9d5ef198a
Fix SparkFun Thing board definition
2015-07-22 22:48:52 +03:00
Todd Treece
4dbb73b11c
adds adafruit huzzah to boards.txt & adds adafruit variant
2015-05-27 10:56:40 -04:00
Phil Eichinger
de9b029d8d
NodeMCU: BUILTIN_LED is on GPIO16
...
see: https://raw.githubusercontent.com/nodemcu/nodemcu-devkit/master/Documents/NODEMCU_DEVKIT_SCH.png
2015-05-21 09:51:11 +02:00
Waldemar Zahn
bee67c3ba9
add nodemcu board
2015-05-04 22:31:00 +02:00
