arduino/esp8266
1
0
Fork 0
mirror of https://github.com/esp8266/Arduino.git synced 2025-04-19 23:22:16 +03:00
Code

add DigiStump Oak pins & board

Browse Source
This commit is contained in:
Christopher Hiller 2017-08-01 00:33:19 -07:00 committed by Ivan Grokhotkov
parent c730c0f10c
commit 3f5d06bc12
4 changed files with 132 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

65
boards.txt
View File

@ -2021,3 +2021,68 @@ gen4iod.menu.UploadSpeed.512000.windows=512000
gen4iod.menu.UploadSpeed.512000.upload.speed=512000
gen4iod.menu.UploadSpeed.921600=921600
gen4iod.menu.UploadSpeed.921600.upload.speed=921600
##############################################################
oak.name=DigiStump Oak
oak.upload.tool=esptool
oak.upload.speed=115200
oak.upload.resetmethod=ck
oak.upload.maximum_size=1040368
oak.upload.maximum_data_size=81920
oak.upload.wait_for_upload_port=true
oak.serial.disableDTR=true
oak.serial.disableRTS=true
oak.build.mcu=esp8266
oak.build.f_cpu=80000000L
oak.build.board=ESP8266_OAK
oak.build.core=esp8266
oak.build.variant=oak
oak.build.flash_mode=dio
oak.build.flash_size=4M
oak.build.flash_freq=40
oak.build.debug_port=
oak.build.debug_level=
oak.menu.CpuFrequency.80=80 MHz
oak.menu.CpuFrequency.80.build.f_cpu=80000000L
oak.menu.CpuFrequency.160=160 MHz
oak.menu.CpuFrequency.160.build.f_cpu=160000000L
oak.menu.UploadSpeed.921600=921600
oak.menu.UploadSpeed.921600.upload.speed=921600
oak.menu.UploadSpeed.115200=115200
oak.menu.UploadSpeed.115200.upload.speed=115200
oak.menu.UploadSpeed.9600=9600
oak.menu.UploadSpeed.9600.upload.speed=9600
oak.menu.UploadSpeed.57600=57600
oak.menu.UploadSpeed.57600.upload.speed=57600
oak.menu.UploadSpeed.256000.windows=256000
oak.menu.UploadSpeed.256000.upload.speed=256000
oak.menu.UploadSpeed.230400.linux=230400
oak.menu.UploadSpeed.230400.macosx=230400
oak.menu.UploadSpeed.230400.macosx=230400
oak.menu.UploadSpeed.230400.upload.speed=230400
oak.menu.UploadSpeed.460800.linux=460800
oak.menu.UploadSpeed.460800.macosx=460800
oak.menu.UploadSpeed.460800.upload.speed=460800
oak.menu.UploadSpeed.512000.windows=512000
oak.menu.UploadSpeed.512000.upload.speed=512000
oak.menu.FlashSize.4M3M=4M (3M SPIFFS)
oak.menu.FlashSize.4M3M.build.flash_size=4M
oak.menu.FlashSize.4M3M.build.flash_ld=eagle.flash.4m.ld
oak.menu.FlashSize.4M3M.build.spiffs_start=0x100000
oak.menu.FlashSize.4M3M.build.spiffs_end=0x3FB000
oak.menu.FlashSize.4M3M.build.spiffs_blocksize=8192
oak.menu.FlashSize.4M3M.build.spiffs_pagesize=256
oak.menu.FlashSize.4M1M=4M (1M SPIFFS)
oak.menu.FlashSize.4M1M.build.flash_size=4M
oak.menu.FlashSize.4M1M.build.flash_ld=eagle.flash.4m1m.ld
oak.menu.FlashSize.4M1M.build.spiffs_start=0x300000
oak.menu.FlashSize.4M1M.build.spiffs_end=0x3FB000
oak.menu.FlashSize.4M1M.build.spiffs_blocksize=8192
oak.menu.FlashSize.4M1M.build.spiffs_pagesize=256

9
doc/boards.rst
View File

@ -131,6 +131,15 @@ WifInfo integrates the ESP-12 or ESP-07+Ext antenna module with a 3.3v regulator
For more information, please see WifInfo related `blog <http://hallard.me/category/wifinfo/>`__ entries, `github <https://github.com/hallard/WifInfo>`__ and `community <https://community.hallard.me/category/16/wifinfo>`__ forum.
DigiStump Oak
-------------
The Oak requires an [adapter](#serial-adapter) for a serial connection or flashing; its micro USB port is only for power.
To make a serial connection, wire the adapter's **TX to P3**, **RX to P4**, and **GND** to **GND**. Supply 3.3v from the serial adapter if not already powered via USB.
To put the board into bootloader mode, configure a serial connection as above, connect **P2 to GND**, then re-apply power. Once flashing is complete, remove the connection from P2 to GND, then re-apply power to boot into normal mode.
Generic ESP8266 modules
-----------------------

3
package/package_esp8266com_index.template.json
View File

@ -73,6 +73,9 @@
},
{
"name": "4D Systems gen4 IoD Range"
},
{
"name": "DigiStump Oak"
}
],
"toolsDependencies": [

55
variants/oak/pins_arduino.h Normal file
View File

@ -0,0 +1,55 @@
/*
pins_arduino.h - Pin definition functions for Arduino
Part of Arduino - http://www.arduino.cc/
Copyright (c) 2007 David A. Mellis
Modified for ESP8266 platform by Ivan Grokhotkov, 2014-2015.
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General
Public License along with this library; if not, write to the
Free Software Foundation, Inc., 59 Temple Place, Suite 330,
Boston, MA 02111-1307 USA
$Id: wiring.h 249 2007-02-03 16:52:51Z mellis $
*/
#ifndef Pins_Arduino_h
#define Pins_Arduino_h
static const uint8_t P0 = 2;
static const uint8_t P1 = 5;
static const uint8_t P2 = 0;
static const uint8_t P3 = 3;
static const uint8_t P4 = 1;
static const uint8_t P5 = 4;
static const uint8_t P6 = 15;
static const uint8_t P7 = 13;
static const uint8_t P8 = 12;
static const uint8_t P9 = 14;
static const uint8_t P10 = 16;
static const uint8_t P11 = 17;
static const uint8_t SDA = 2;
static const uint8_t SCL = 0;
static const uint8_t SS = 15;
static const uint8_t MOSI = 13;
static const uint8_t MISO = 12;
static const uint8_t SCK = 14;
static const uint8_t BUILTIN_LED = 5;
static const uint8_t LED_BUILTIN = 5;
static const uint8_t A0 = 17;
#endif /* Pins_Arduino_h */