* PHY status API for W5500 & ENC28J60 drivers
* move linkStatus() from ArduinoEthernet:: to LwipIntfDev::
* LwipIntfDev: include PHY status into ::connected()
Remove nonos-sdk-v2.2.0-28-g89920dc aka 3v0, since we have a real v3
Remove 3.0.0...3.0.4 to reduce overhead in maintaining a bunch or binary patches
Update our docs and menu opts to mention 'experimental' status
Old versions still remains in git history, so anyone wanting to play around with 3.0.x could still make use of that work
* Don't return `true` with WiFiClientSecureBearSSL::connected() when disconnected
Apply the same condition as with normal WiFiClient - we are not connected
when it's not possible to both write and read.
Implement separate methods for actual connection status and the internal
ssl engine status and update methods that were previously using available()
for this purpose
Update examples to check available() when the intent is to only read the
data and not interact with the client in any other way. Also, use connect()
as a way to notify errors, no need to check things twice
The current implementation of the Servo lib always resets the position when detaching.
In AVR Servo, this isn't the case, instead, it doesn't move the servo but leaves it as it was before getting detached.
Shortening up the default hard-coded 8000 ms timeout, will save energy when module can't reach its update server, especially on battery powered projects, and otherwise provide adaptability to the local wlan. The ESPhttpUpdate object is auto-created by #including ESP8266HTTPUpdate. ESP8266HTTPUpdate also provides a constructor with param httpClientTimeout, but to use it required destroying the auto ESPhttpUpdate object, or creating a secondESPhttpUpdate(timeout) object.
Api for saving heap when Client class is used by a Server (WiFiServer class): Client = Server.available().
Suppose the local end is the server and the remote end is the client, we will deal with heap memory at the local end.
When the local application (server) decides to close an active connection with a remote end it issues an Client.stop.
The stop() function calls the close() function of ClientContext class which in turn calls tcp_close.
The connexion is closed by tcp_close and the protocol control block (pcb) can be put in the following states depending on the requests sent by the remote: CLOSING, FIN_WAIT_1 and FIN_WAIT_2. In theses states pcbs are not freed, then consume some memory heap.
If an acknowledgment from the remote end is received, the pcb enter in TIME_WAIT state for some minutes but pcbs in TIME_WAIT state are not freed. Then consume some heap memory.
TIME_WAIT pcbs are automatically freed after some minutes or can be freed for instance issuing an tcp_kill_timewait()
in the local application which will free the oldest pcb in TIME_WAIT state.
If the connection is first closed from the remote end (the client), the local end (server) receive a connection termination request. It then acknowledge it and enter in CLOSE_WAIT state waiting for a connection termination request from the local application.
It then send a termination request and enter in LAST_ACK state until it receive an acknowledgment from the remote end.
After receiving the acknowledgment it enter in ClOSED state and the local pcb is freed leaving some room in the heap memory.
To summarize, when a connexion termination request is send by one end (remote or local), the local pcb is not freed immediatly.
This pcb can be in the following states: FIN_WAIT_1, FIN_WAIT_2, CLOSING, TIME_WAIT, CLOSE_WAIT, LAST_ACK.
As a consequence, some old pcbs from old closed connections are still consuming heap memory.
The local application can call tcp_kill_timewait hoping it will free some TIME_WAIT state pcbs. But if the server receive frequent connections requests and close them after sending whatever it has to send, there may be zero pcbs in TIME_WAIT state among all previously closed connections.
In case of insufficient memory to accept a new connection, lwip has developped a strategy: it successively tries to kill the oldest pcb in TIME_WAIT state, or in LAST_ACK state or in CLOSING state or the oldest active connection with lower priority than the new one.
As a matter of fact this "urgent" strategy is deployed only when very few heap memory remain available (less than some kb). In case of success, Client.available returns a valid Client but the local application will crash when sending or receiving data from the client (Client.read ou readuntil or available) because this need more heap memory and just some kb were freed in lwip to allocate the new pcb structure ans start the new connection.
The propose API is intended to avoid this drawback by calling the abort function of ClientContext which in turn calls tcp_abort which calls tcp_abandon. The connection is aborted and notified to the client with a RESET and the pcb and ressources associated are immediately released increasing the available heap memory.
Adds max duration check. In case it is over SDK limit, enable 'repeat'ing timer with a duration proportional to the original one and count until it executes N times, only then run the callback.
Code with durations less than that executes as usual. Original proposal was to not create anything or create some kind of error state... which seems counter-productive to not help out with this pretty solvable use-case.
Additional updates, while refactoring the class
- Stronger types for internal time management using `std::chrono::duration`. Works the same, `std::chrono::duration` handles seconds <-> milliseconds conversion, and we don't have to remember the time type in each method. (...and even allow `once()` and `attach` as overloads instead of the current `_ms`-suffix, in a future update)
- `::detach()` when timer finishes. Fixes (unintentional?) side-effect that we remain `::active()`. Plus, this destroys any lambda-bound variables that will persist with the Ticker object. And, since we can't re-arm with the existing function (`Ticker::attach_ms(uint32_t just_the_time)` and etc.)
- `std::variant` aka union for internal callback storage (kind-of similar to #6918). Instead of having two separate code paths, **always** attach our static function and dispatch using type info. Also helps with the issue described above, since it will call `std::function` dtor when ptr + arg is attached instead of doing nothing.
- smarter copy and move, detaching existing timer on assignment and detaching the moved-in timer object in both ctor and assignment. Copying or moving a running timer no longer blindly copies `_timer` pointer, allowing to disarm the original one. Since we are a simple wrapper around `os_timer_t`, just do the simpler thing (and not re-schedule the callback, try to store original times, etc. polledTimeout already does it and is copyable)
* sprinkle IPAddress(...).isSet() across our loops to avoid polling on a
stopped interface. status callback and netif_is_up **does not
guarantee and we could use the interface**!
* register *one* status callback per instance, e.g. when begin() is called
multiple times (also notice a subtle issue with schedule function when
instance is delete'ed)
* consistent LwipIntf callback signature. no need for rvalue, just pass
stdfunc as-is and let the compiler figure it out
- split workflows into separate files to trigger by path
this should help out documentation and boards / eboot / pkg files
updates, since those *wont* trigger usual build stuff anymore
- build*.sh whatever merged into just common.sh and build.sh
trigger different parity builds, mod % rem and allow to set .ino list
through the environment variable
- removes unnecessary temporary files, try to use more pipes
move remaining ones into cache dir instead of PWD
- remove legacy TRAVIS env vars, use ESP8266_ARDUINO prefix for config
- remove Windows path workarounds
- hardware/ and ide/ directories are set through envionment
do not force specific paths, simplify builds on local machine
- sketch list is set through environment. expicit paths for Windows and
macOS builders. platformio also gets a real shuffled list instead of
mod and rem magic numbers
- detect root of the repo through git cli, not base{name,dir} or relative paths
The NONOS SDK's `struct bss_info` in `user_interface.h` has grown since the
beginning of this project. The additional elements are not accessible.
Add a method for R/O access to full `struct bss_info`.
See #7965 (comment)
Amends #8507
I took the liberty to also do some refactoring; specifically, fixing signed vs. unsigned mismatch in len, using pointer object vs. the original manual malloc & free, try to have named constants for certain addresses and lengths, plus localize printing of u8 arrays.
The suggested test to have a 'dummy' verifier works just fine. (...how it actually works and gets the hash to compare with is a whole other question, though)
Another issue noticed while testing, in the underlying bearssl api there's an actual limit for hash length.
6105635531/inc/bearssl_rsa.h (L257)
* make WiFi/Ethernet interface compatible with Arduino Ethernet API
provide some minimaly adapted examples from legacy
* move ethernet compat globals to EthernetCompat.h
* LegacyEthernet: add UDP example
* adjust comments
Co-authored-by: Max Prokhorov <prokhorov.max@outlook.com>
* Board ID as build flag
When using IDE or `arduino-cli board list`, show full board name and FQBN
```
$ arduino-cli.exe board list
Port Protocol Type Board Name FQBN Core
xxx.xxx.x.xxx network Network Port LOLIN(WEMOS) D1 R2 & mini esp8266com:esp8266:d1_mini esp8266com:esp8266
```
Also add `description` field to the mDNS response containing the
original `{build.board}` string value.
resolve#7759
* does not work with recent ide (?)
* fixup! does not work with recent ide (?)
* Add FSTools with examples of how to convert between SPIFFS and LITTLEFS.
* Oops. Need to pass layout by reference in order to capture the correct address. Took a while to find that. There maybe a better way to store all these configs
* Update FSTools.cpp
fix ESP.h to Esp.h
* Fix unused variable i
* Parsed with restyle.sh. Compile with all errors.
* remove unused variable
* fix different sign complication error
* Fix indentation to spaces
Run test/restyle.sh
Remove commented code
Use #ifdef blocks for debugging. `DEBUG_ESP_CORE` and `DEBUG_ESP_PORT`
use `static constexpr layout` which saves ROM ~500B for unused vars
* Update FSTools.cpp
Add yield in between file copy
* works
* fixup! works
* back to callbacks
* names
* daisy chain
* seconds
* less inline
* fix dns setter
* might as well keep using initlist
/to d-a-v it has automatic storage, here it's the same stack based one
(just one less line for us)
* shift blame
* naming
* fix impl
* revert to ip4 dns
* merge fix
* restyle
* masking done wrong
* Initialize SoftAP DhcpServer object on demand
Remove dependency on global ctor, and just construct the object when
someone asks us to do it. Only dependency right now is netif_git, which
is expected to be initialized by the lwip code some time before
dhcps_start happens.
Removing ip_info from begin(), since we never reference later on.
Also removing the specific check for netif id and simplify the ctors.
Update tests and recover old nonos-sdk dhcps functions that were not implemented.
* nonos helpers have a separate header
* wifi ap needs this anyway, simplify sketch includes
* missing example
* existing name :/
* trying to fix header dependency
* restyle
* not a c header
* no need to init
* move dhcp server getter to WiFi
more... arduino'ish? we ahve object as namespace, plus everything else
related to softAP is there
redundant includes, redundant mock impl (out-of-scope here to fix)
* ...move things back, still expose as WiFi method
* review fix
* include -nonos header in wifi lib though
* no more lwip include
* style
* need mock dhcpserver instance
* Define lwIP's s32/u32 to int
s32/u32 were previously defined as long,
but long can be 64 bits in host mode,
so this commit reduces valgrind complaints and increase coherency.
* some lads like to use `unsigned long` for 32 bits IPv4 addresses
* fix lwIP's `sys_now()` return type
* fix C declarations
* merge upstream (lwip2) update on sys_now() definition
* matching lwIP api (2/2)
Co-authored-by: Max Prokhorov <prokhorov.max@outlook.com>
* Add support to specify global build defines and options
A script manages the use of a file with a unique name, like
`SketchName.ino.globals.h`, in the Sketch source directory to provide compiler
command-line options (build options) and sketch global defines. The build
option data is encapsulated in a unique "C" comment block and extracted into
the build tree during prebuild.
* Applied os.path.normpath() liberally to input arguments. Fixes windows file path issue.
Improved helpful message for adding embedded build options.
* doubleup '\'
* Added context help for build option support
* expunged sketchbook global
added workaround for aggressive caching
* inital pass at searching for and reading preferences.txt
* Correct Windows path for preferences.txt
Added portable path for preferences.txt
Expanded file timestamp granularity
Improved error message printing for Arduino IDE 2.0 RC4
* Improved portable path and various Windows paths to preferences.txt
* Add cleanup logic and identify 1st run after IDE restart
* text corrections
* Create mkbuildoptglobals.py
When global header file does not exist, this print makes it easier for user to create the header file by providing its name and documentation pointer.
* build.opt heads up to user
Compiler command line changes from build.opt are shown to user
* Updated text
* oops
* Expanded comment and made print help consistent
* Improve handling stderr/stdout with "no verbose output"
Grouped helpful info to print at the end.
Added missing return value.
* Correct timestamp on CommonHFile.h
More improvements to printing
Updated docs.
* Added command-line parser
Support hints for compiler.cache_core. For use when Arduino IDE uses
command-line options that override compiler.cache_core.
Removed overuse of ()
Improve FAQ entry
* Fix script failure under windows
Rely on argpaser for checking that all arguments are present.
Removed redundant argument check in main().
Added '--debug' option and print_dbg method.
Rethink failures on overrides. Remove well know path fallbacks,
error exit when override file is missing.
In well-known path search for preferences.txt, do not assume true.
Make failure to find an error exit event.
When Windows has two preferences.txt files and they have different
values for caching and globals.h is used, error exit. It is not
possible to know from the script which is being used.
* Use quotes on build.opt
Update comment
Include the @ within the expantion string use quotes around file name.
Update doc example to remind and use quotes.
* Update CI for build option and global support
Added "mkbuildoptglobals.extra_flags=--cache_core" to platform.loca.txt
Update "-ide-version=10802" this version number indicates aggressive caching support
Added example to test global .h support
* Add debug prints
Added --debug to CI - this needs to be removed later
Tweaks to touch...
* Give each build VM a unique build.tmp space
* Corrected style on example
temp CI changes
debug crud
Added --ci switch
* Removed CI debug crud
run_CI_locall.sh works fine locally. Hosted Multi-VM CI fails
to work with 'aggressive caching' workaround method.
Add #if defined(CORE_MOCK) to failing example.
* Try HOST_MOCK
* CI adjustments
mkbuildoptglobals.py is optimized around the Arduino IDE 1.x
behaviour. One way the CI differs from the Arduino IDE is in the
handling of core and caching core. With the Arduino IDE, each sketch
has a private copy of core and contributes to a core cache. With the
CI, there is one shared copy of core for all sketches. When global
options are used, the shared copy of core and cache are removed before
and after the build.
* Doc update
The key functions added are:
`bool enableForwarder(const String &domainName=emptyString, const IPAddress &dns=uint32_t)0)`
If specified, `enableForwarder` will update the `domainName` that is used to match DNS request to this AP's IP Address. A non-matching request will be forwarded to the DNS server specified by `dns`.
Returns `true` on success.
Returns `false`,
* when forwarding `dns` is not set, or
* unable to allocate resources for managing the DNS forward function.
`void disableForwarder(const String &domainName=emptyString, bool freeResources=false)`
`disableForwarder` will stop forwarding DNS requests. If specified, updates the `domainName` that is matched for returning this AP's IP Address.
Optionally, resources used for the DNS forward function can be freed.
Avoid blowing up user code when `$user:$password` string is longer than
127 bytes. Use String to both manage the memory and handle concatenation.
Also clean-up historical quicks such as
- `if(StringObject)` that is always true since we implemented SSO
- `authReq = "";` / `authReq = String();`, which will happen anyway
- `(String)...` casts that happen anyway, implicitly (and which is also not a 'cast' btw, we do init it)
