Don't return true with WiFiClientSecureBearSSL::connected() when really disconnected (#8330)

* Don't return `true` with WiFiClientSecureBearSSL::connected() when disconnected

Apply the same condition as with normal WiFiClient - we are not connected
when it's not possible to both write and read.

Implement separate methods for actual connection status and the internal
ssl engine status and update methods that were previously using available()
for this purpose

Update examples to check available() when the intent is to only read the
data and not interact with the client in any other way. Also, use connect()
as a way to notify errors, no need to check things twice

libraries/ESP8266WiFi/examples/BearSSL_CertStore/BearSSL_CertStore.ino

@@ -75,8 +75,7 @@ void fetchURL(BearSSL::WiFiClientSecure *client, const char *host, const uint16_
   if (!path) { path = "/"; }
 
   Serial.printf("Trying: %s:443...", host);
-  client->connect(host, port);
-  if (!client->connected()) {
+  if (!client->connect(host, port)) {
     Serial.printf("*** Can't connect. ***\n-------\n");
     return;
   }
@@ -88,7 +87,7 @@ void fetchURL(BearSSL::WiFiClientSecure *client, const char *host, const uint16_
   client->write("\r\nUser-Agent: ESP8266\r\n");
   client->write("\r\n");
   uint32_t to = millis() + 5000;
-  if (client->connected()) {
+  while (client->available()) {
     do {
       char tmp[32];
       memset(tmp, 0, 32);

libraries/ESP8266WiFi/examples/BearSSL_MaxFragmentLength/BearSSL_MaxFragmentLength.ino

@@ -44,8 +44,7 @@ int fetchNoMaxFragmentLength() {
 
   BearSSL::WiFiClientSecure client;
   client.setInsecure();
-  client.connect("tls.mbed.org", 443);
-  if (client.connected()) {
+  if (client.connect("tls.mbed.org", 443)) {
     Serial.printf("Memory used: %d\n", ret - ESP.getFreeHeap());
     ret -= ESP.getFreeHeap();
     fetch(&client);
@@ -81,8 +80,7 @@ int fetchMaxFragmentLength() {
   Serial.printf("\nConnecting to https://tls.mbed.org\n");
   Serial.printf("MFLN supported: %s\n", mfln ? "yes" : "no");
   if (mfln) { client.setBufferSizes(512, 512); }
-  client.connect("tls.mbed.org", 443);
-  if (client.connected()) {
+  if (client.connect("tls.mbed.org", 443)) {
     Serial.printf("MFLN status: %s\n", client.getMFLNStatus() ? "true" : "false");
     Serial.printf("Memory used: %d\n", ret - ESP.getFreeHeap());
     ret -= ESP.getFreeHeap();

libraries/ESP8266WiFi/examples/BearSSL_Sessions/BearSSL_Sessions.ino

@@ -63,8 +63,7 @@ void fetchURL(BearSSL::WiFiClientSecure *client, const char *host, const uint16_
   if (!path) { path = "/"; }
 
   Serial.printf("Trying: %s:443...", host);
-  client->connect(host, port);
-  if (!client->connected()) {
+  if (!client->connect(host, port)) {
     Serial.printf("*** Can't connect. ***\n-------\n");
     return;
   }
@@ -76,7 +75,7 @@ void fetchURL(BearSSL::WiFiClientSecure *client, const char *host, const uint16_
   client->write("\r\nUser-Agent: ESP8266\r\n");
   client->write("\r\n");
   uint32_t to = millis() + 5000;
-  if (client->connected()) {
+  while (client->available()) {
     do {
       char tmp[32];
       memset(tmp, 0, 32);

libraries/ESP8266WiFi/examples/BearSSL_Validation/BearSSL_Validation.ino

@@ -49,8 +49,7 @@ void fetchURL(BearSSL::WiFiClientSecure *client, const char *host, const uint16_
   ESP.resetFreeContStack();
   uint32_t freeStackStart = ESP.getFreeContStack();
   Serial.printf("Trying: %s:443...", host);
-  client->connect(host, port);
-  if (!client->connected()) {
+  if (!client->connect(host, port)) {
     Serial.printf("*** Can't connect. ***\n-------\n");
     return;
   }
@@ -62,7 +61,7 @@ void fetchURL(BearSSL::WiFiClientSecure *client, const char *host, const uint16_
   client->write("\r\nUser-Agent: ESP8266\r\n");
   client->write("\r\n");
   uint32_t to = millis() + 5000;
-  if (client->connected()) {
+  while (client->available()) {
     do {
       char tmp[32];
       memset(tmp, 0, 32);

libraries/ESP8266WiFi/examples/HTTPSRequest/HTTPSRequest.ino

@@ -77,7 +77,7 @@ void setup() {
   client.print(String("GET ") + url + " HTTP/1.1\r\n" + "Host: " + github_host + "\r\n" + "User-Agent: BuildFailureDetectorESP8266\r\n" + "Connection: close\r\n\r\n");
 
   Serial.println("Request sent");
-  while (client.connected()) {
+  while (client.available()) {
     String line = client.readStringUntil('\n');
     if (line == "\r") {
       Serial.println("Headers received");

libraries/ESP8266WiFi/src/WiFiClientSecureBearSSL.cpp

@@ -250,19 +250,32 @@ void WiFiClientSecureCtx::_freeSSL() {
 }
 
 bool WiFiClientSecureCtx::_clientConnected() {
-  return (_client && _client->state() == ESTABLISHED);
+  if (!_client || (_client->state() == CLOSED)) {
+    return false;
+  }
+
+  return _client->state() == ESTABLISHED;
+}
+
+bool WiFiClientSecureCtx::_engineConnected() {
+  return _clientConnected() && _handshake_done && _eng && (br_ssl_engine_current_state(_eng) != BR_SSL_CLOSED);
 }
 
 uint8_t WiFiClientSecureCtx::connected() {
-  if (available() || (_clientConnected() && _handshake_done && (br_ssl_engine_current_state(_eng) != BR_SSL_CLOSED))) {
+  if (!_engineConnected()) {
+    return false;
+  }
+
+  if (_pollRecvBuffer() > 0) {
     return true;
   }
-  return false;
+
+  return _engineConnected();
 }
 
 int WiFiClientSecureCtx::availableForWrite () {
-  // code taken from ::_write()
-  if (!connected() || !_handshake_done) {
+  // Can't write things when there's no connection or br_ssl engine is closed
+  if (!_engineConnected()) {
     return 0;
   }
   // Get BearSSL to a state where we can send
@@ -284,7 +297,7 @@ int WiFiClientSecureCtx::availableForWrite () {
 size_t WiFiClientSecureCtx::_write(const uint8_t *buf, size_t size, bool pmem) {
   size_t sent_bytes = 0;
 
-  if (!connected() || !size || !_handshake_done) {
+  if (!size || !_engineConnected()) {
     return 0;
   }
 
@@ -331,10 +344,11 @@ size_t WiFiClientSecureCtx::write_P(PGM_P buf, size_t size) {
 }
 
 size_t WiFiClientSecureCtx::write(Stream& stream) {
-  if (!connected() || !_handshake_done) {
-    DEBUG_BSSL("write: Connect/handshake not completed yet\n");
+  if (!_engineConnected()) {
+    DEBUG_BSSL("write: no br_ssl engine to work with\n");
     return 0;
   }
+
   return stream.sendAll(this);
 }
 
@@ -343,12 +357,20 @@ int WiFiClientSecureCtx::read(uint8_t *buf, size_t size) {
     return -1;
   }
 
-  int avail = available();
-  bool conn = connected();
-  if (!avail && conn) {
-    return 0;  // We're still connected, but nothing to read
+  // will either check the internal buffer, or try to wait for some data
+  // *may* attempt to write some pending ::write() data b/c of _run_until
+  int avail = _pollRecvBuffer();
+
+  // internal buffer might still be available for some time
+  bool engine = _engineConnected();
+
+  // we're still connected, but nothing to read
+  if (!avail && engine) {
+    return 0;
   }
-  if (!avail && !conn) {
+
+  // or, available failed to assign the internal buffer and we are already disconnected
+  if (!avail && !engine) {
     DEBUG_BSSL("read: Not connected, none left available\n");
     return -1;
   }
@@ -363,10 +385,11 @@ int WiFiClientSecureCtx::read(uint8_t *buf, size_t size) {
     return to_copy;
   }
 
-  if (!conn) {
+  if (!engine) {
     DEBUG_BSSL("read: Not connected\n");
     return -1;
   }
+
   return 0; // If we're connected, no error but no read.
 }
 
@@ -395,7 +418,7 @@ int WiFiClientSecureCtx::read() {
   return -1;
 }
 
-int WiFiClientSecureCtx::available() {
+int WiFiClientSecureCtx::_pollRecvBuffer() {
   if (_recvapp_buf) {
     return _recvapp_len;  // Anything from last call?
   }
@@ -416,8 +439,12 @@ int WiFiClientSecureCtx::available() {
   return 0;
 }
 
+int WiFiClientSecureCtx::available() {
+  return _pollRecvBuffer();
+}
+
 int WiFiClientSecureCtx::peek() {
-  if (!ctx_present() || !available()) {
+  if (!ctx_present() || (0 == _pollRecvBuffer())) {
     DEBUG_BSSL("peek: Not connected, none left available\n");
     return -1;
   }
@@ -436,7 +463,7 @@ size_t WiFiClientSecureCtx::peekBytes(uint8_t *buffer, size_t length) {
   }
 
   _startMillis = millis();
-  while ((available() < (int) length) && ((millis() - _startMillis) < 5000)) {
+  while ((_pollRecvBuffer() < (int) length) && ((millis() - _startMillis) < 5000)) {
     yield();
   }
 

libraries/ESP8266WiFi/src/WiFiClientSecureBearSSL.h

@@ -195,7 +195,13 @@ class WiFiClientSecureCtx : public WiFiClient {
     unsigned char *_recvapp_buf;
     size_t _recvapp_len;
 
+    int _pollRecvBuffer(); // If there's a buffer with some pending data, return it's length
+                           // If there's no buffer, poll the engine and store any received data there and return the length
+                           // (which also may change the internal state, e.g. make us disconnected)
+
     bool _clientConnected(); // Is the underlying socket alive?
+    bool _engineConnected(); // Are both socket and the bearssl engine alive?
+
     std::shared_ptr<unsigned char> _alloc_iobuf(size_t sz);
     void _freeSSL();
     int _run_until(unsigned target, bool blocking = true);