Christopher Pascoe
4ef0466578
Don't trip the WDT if interrupts are disabled during write() or flush().
...
Prior to this change, if interrupts were disabled during a call to
HardwareSerial::write() when the circular buffer was full, or
HardwareSerial::flush() when the circular buffer was non-empty,
we would loop forever and trip a watchdog timeout.
2015-12-29 12:05:15 -05:00
Christopher Pascoe
c8772cfcd0
Make HardwareSerial::begin() and end() interrupt safe and disable TX/RX if we can't allocate a buffer for them.
...
Prior to this change, the interrupt could fire during initialisation,
necessitating a deep check that the HardwareSerial structure had valid
_tx_buffer or _rx_buffer each time an interrupt occurred.
By keeping uart_t's and HardwareSerial's (txEnabled, _tx_buffer) and
(rxEnabled, _rx_buffer) in sync, we can remove this extra check, as
well as fixing a null pointer dereference if e.g. _tx_buffer allocation
failed and write() was subsequently called.
2015-12-28 19:11:12 -05:00
Christopher Pascoe
cfe7ae1118
Put HardwareSerial and cbuf methods called from interrupt context in RAM.
...
This is required per the non-OS SDK doc, which states:
"Using non-OS SDK, please do not call any function defined with
ICACHE_FLASH_ATTR in the interrupt handler."
This avoids an "Illegal instruction" exception with epc1 pointing at a valid
instruction (in flash) for one of the moved methods.
2015-12-28 18:35:27 -05:00
Christopher Pascoe
83398f6011
Don't bother testing isRxEnabled() on UART1 - it is always false.
2015-12-28 17:55:16 -05:00
Christopher Pascoe
e83dd4d241
Use lightweight tests when we only care if the buffer is empty or full.
2015-12-28 17:53:10 -05:00
Christopher Pascoe
e147314f97
Re-enable interrupts before directly enqueuing characters in the UART FIFO.
...
Not sure why, but this reduces the occurrence rate of an occasional ~3.25 or
~7μs intercharacter delay, which was interfering with use of the UART to
generate precise timing pulses (such as driving WS2812 LEDs).
2015-12-28 17:44:28 -05:00
Markus
4b90db41fe
Merge pull request #1314 from gtalusan/master
...
fix undefined DEBUG_TLS_MEM_PRINT hiding return statement
2015-12-28 13:59:34 +01:00
George Talusan
c3de2851c0
fix undefined DEBUG_TLS_MEM_PRINT hiding return statement
2015-12-27 21:36:48 -05:00
Markus
304bf08497
Merge pull request #1312 from denvera/master
...
Allow setting TCP timeout
2015-12-27 20:09:34 +01:00
Denver Abrey
80857e3f87
Also set timeout on already existing connections
2015-12-27 20:02:08 +02:00
Denver Abrey
d1a6b32133
Allow setting TCP timeout
2015-12-27 19:45:17 +02:00
Markus
7a010a38cc
Merge pull request #1309 from wemos/master
...
fix d1_mini board.
2015-12-27 11:53:38 +01:00
wemos
16244c5dfd
fix d1_mini board.
2015-12-27 14:36:22 +08:00
Markus
7e0f83951b
Merge pull request #1306 from Links2004/master
...
add setSleepMode + getSleepMode and setPhyMode + getPhyMode to WiFi
2015-12-26 14:46:47 +01:00
Markus Sattler
195e595453
add setSleepMode + getSleepMode and setPhyMode + getPhyMode to WiFi
2015-12-26 13:02:31 +01:00
Ivan Grokhotkov
97ba91b47b
Merge pull request #1301 from hallard/master
...
Set default WifInfo board speed to 160MHz
2015-12-24 23:20:17 +03:00
Charles
659c33a114
Set default WifInfo board speed to 160MHz
2015-12-24 18:42:21 +01:00
Markus
dfe2b819b8
Merge pull request #1295 from Links2004/master
...
rework StreamString::write to use String internal buffer direct.
2015-12-23 18:53:46 +01:00
Markus Sattler
982ef45748
Merge remote-tracking branch 'remotes/esp8266/master'
2015-12-23 18:30:24 +01:00
Markus
caa2443f22
Merge pull request #1294 from gtalusan/bytesWritten_accounting
...
better bytesWritten accounting in sendRequest and writeToStream
2015-12-23 18:30:15 +01:00
George Talusan
1e264047f9
better bytesWritten accounting in sendRequest and writeToStream
2015-12-23 11:29:59 -05:00
Markus Sattler
50ad8ccdf5
rework StreamString::write to use String internal buffer direct.
...
#1289
2015-12-23 13:40:16 +01:00
Markus
dd93ea26ee
Merge pull request #1290 from Links2004/httpClient
...
http client allow slow streams for sendRequest
2015-12-23 13:38:50 +01:00
Markus Sattler
467da7c50f
better error handling
2015-12-23 12:54:44 +01:00
Markus Sattler
b845d03b89
Merge remote-tracking branch 'remotes/esp8266/master' into httpClient
2015-12-23 12:50:19 +01:00
Ivan Grokhotkov
28d1ef3f0f
Rebuild liblwip.a with debugging symbols
...
Source: http://bbs.espressif.com/viewtopic.php?f=46&t=1459
2015-12-23 12:33:11 +03:00
Ivan Grokhotkov
7f4dd52ed1
GDBStub: fix packet end not being sent for some exceptions
2015-12-23 12:10:01 +03:00
Ivan Grokhotkov
1c7b81660b
Merge pull request #1289 from gtalusan/short_writes
...
handle short writes
2015-12-23 10:15:57 +03:00
Ivan Grokhotkov
9a1b9058e3
Merge pull request #1287 from gtalusan/master
...
fix debug message in sendRequest
2015-12-23 10:15:09 +03:00
Ivan Grokhotkov
27bfe3490b
Merge pull request #1284 from ivankravets/patch-5
...
Update demo of Over-the-Air (OTA)
2015-12-23 10:14:37 +03:00
Ivan Grokhotkov
0603f31330
Merge pull request #1288 from gtalusan/fix_debug_build
...
fix debug build
2015-12-23 10:14:21 +03:00
Ivan Grokhotkov
2d70b36212
Fix warning due to lack of virtual destructor
2015-12-23 10:13:41 +03:00
Ivan Grokhotkov
60baf802e1
Add function to measure stack high water mark (thanks @g3gg0)
2015-12-23 10:13:01 +03:00
Ivan Grokhotkov
66a88ac8d2
Fix bad DEBUGV argument (thanks @g3gg0)
2015-12-23 10:11:40 +03:00
George Talusan
70c85c0901
handle short writes
2015-12-22 21:31:30 -05:00
George Talusan
742caa10ec
fix debug build
2015-12-22 20:29:19 -05:00
George Talusan
35d2e49c3b
fix debug message in sendRequest
2015-12-22 20:13:35 -05:00
Ivan Kravets
e1fafe6c82
Update demo of Over-the-Air (OTA)
2015-12-22 19:58:20 +02:00
Ivan Grokhotkov
ee2d4495fd
Additional check in wl_definitions.h to guard against duplicate definitions
2015-12-22 14:08:17 +03:00
Markus Sattler
d77e605461
http client allow slow streams for sendRequest
...
fix part of #1274
2015-12-22 10:43:12 +01:00
Markus
c844126204
Merge pull request #1279 from Links2004/master
...
add patch esp_iot_sdk_v1.5.0_15_12_15_p1
2015-12-22 10:40:42 +01:00
Markus Sattler
e84e6f8ae8
add patch esp_iot_sdk_v1.5.0_15_12_15_p1
...
espressif:
Here is a patch based on ESP8266_NONOS_SDK_V1.5.0 solved a problem that calling espconn_abort may cause unexpected reset.
2015-12-22 10:20:06 +01:00
Ivan Grokhotkov
cda14204fe
Fix SPIFFS path length check, add notes about FSInfo structure ( #1273 )
2015-12-22 11:52:50 +03:00
Ivan Grokhotkov
d460de8879
Merge branch 'me-no-dev-master'
...
* me-no-dev-master:
fix identation
optimize pwm interrupt handler for better precision
2015-12-22 11:17:33 +03:00
Ivan Grokhotkov
81c315046b
Merge pull request #1270 from vindolin/master
...
Add message count and the chip ID to the request/response messages in the mesh example.
2015-12-22 10:58:53 +03:00
Ivan Grokhotkov
70cf3c36ef
Add missing AES table pointers ( #1271 , #1256 )
2015-12-22 07:59:54 +03:00
Ivan Grokhotkov
8caf70c11b
Merge pull request #1277 from alltheblinkythings/register_chipv6_fix
...
Fix RAM corruption caused by our hook of register_chipv6_phy(init_data*)
2015-12-22 07:01:58 +03:00
Christopher Pascoe
63f1e40106
Fix RAM corruption caused by our hook of register_chipv6_phy(init_data*).
...
"init_data", when non-NULL, is on the heap, and the register_chipv6_phy call
sometimes modifies data in (at least) the offset range [128:249], suggesting
that it is a buffer larger than 128 bytes in size (the size of our
"phy_init_data" buffer). When we use our static buffer (prior to this
change), the call could would overwrite the .rodata section and lead to
undefined behaviour.
To address this, just patch the heap-allocated buffer with our data.
Move phy_init_data to flash as it's now readonly and never modified.
2015-12-21 19:18:29 -08:00
pgollor
bb2d1ae8b7
Merge pull request #1272 from ivankravets/patch-4
...
Fix boards Flash size; Explained about custom FLASH/SPIFFS
2015-12-22 00:04:33 +01:00
Ivan Kravets
f020b9b46f
Typo fix
2015-12-21 23:38:09 +02:00
