arduino/esp8266
1
0
Fork 0
mirror of https://github.com/esp8266/Arduino.git synced 2025-06-22 08:22:04 +03:00
Code Activity

Always arm the "TX FIFO Empty" interrupt after we write into _tx_buffer.

Browse Source 
This avoids a race where the interrupt handler detects an empty _tx_buffer
just before we write data into it.

Note that commit d6f62943d4 works around
this race when data is continually added to _tx_buffer in the hung state.
We revert that change here as the race should no longer occur.

Testing performed:
 - set UART_CONF1.txfifo_empty_thrhd=0x70 (which exacerbates the issue)
 - generate a ~240 byte burst of data, sent in back-to-back Serial1.write(, 4)
   calls, optionally followed by a Serial1.flush()
Test results:
 - before this change, observe occasional unsent data and hang in flush()
   (if used).
 - after this change, data is sent as expected.
This commit is contained in:
Christopher Pascoe
2015-12-06 21:03:05 -08:00
parent ee314f2cdc
commit cc0a8ead55
1 changed files with 1 additions and 4 deletions
Download Patch File Download Diff File Expand all files Collapse all files

5
cores/esp8266/HardwareSerial.cpp
View File

@ -617,18 +617,15 @@ size_t HardwareSerial::write(uint8_t c) {
size_t room = uart_get_tx_fifo_room(_uart);
if(room > 0 && _tx_buffer->empty()) {
uart_transmit_char(_uart, c);
if(room < 10) {
uart_arm_tx_interrupt(_uart);
}
return 1;
}
while(_tx_buffer->room() == 0) {
yield();
uart_arm_tx_interrupt(_uart);
}
_tx_buffer->write(c);
uart_arm_tx_interrupt(_uart);
return 1;
}