arduino/esp8266
1
0
Fork 0
mirror of https://github.com/esp8266/Arduino.git synced 2025-06-13 13:01:55 +03:00
Code Activity

add DigiStump Oak pins & board

Browse Source
This commit is contained in:
Christopher Hiller
2017-08-01 00:33:19 -07:00
committed by Ivan Grokhotkov
parent c730c0f10c
commit 3f5d06bc12
4 changed files with 132 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

9
doc/boards.rst
View File

@ -131,6 +131,15 @@ WifInfo integrates the ESP-12 or ESP-07+Ext antenna module with a 3.3v regulator
For more information, please see WifInfo related `blog <http://hallard.me/category/wifinfo/>`__ entries, `github <https://github.com/hallard/WifInfo>`__ and `community <https://community.hallard.me/category/16/wifinfo>`__ forum.
DigiStump Oak
-------------
The Oak requires an [adapter](#serial-adapter) for a serial connection or flashing; its micro USB port is only for power.
To make a serial connection, wire the adapter's **TX to P3**, **RX to P4**, and **GND** to **GND**. Supply 3.3v from the serial adapter if not already powered via USB.
To put the board into bootloader mode, configure a serial connection as above, connect **P2 to GND**, then re-apply power. Once flashing is complete, remove the connection from P2 to GND, then re-apply power to boot into normal mode.
Generic ESP8266 modules
-----------------------