arduino/esp8266
1
0
Fork 0
mirror of https://github.com/esp8266/Arduino.git synced 2025-10-15 11:26:40 +03:00
Code Activity

Set SPI default speed to 500Khz. Set SPI speed for Ehternet to 4Mhz.

Browse Source
This commit is contained in:
Cristian Maglie
2012-06-08 22:51:03 +02:00
parent b2ded1f1a5
commit 3b0d08af6b
2 changed files with 11 additions and 5 deletions
Download Patch File Download Diff File Expand all files Collapse all files

7
hardware/arduino/sam/libraries/SPI/SPI.cpp
View File

@@ -26,7 +26,8 @@ void SPIClass::begin(uint8_t _pin) {
g_APinDescription[spiPin].ulPinType,
g_APinDescription[spiPin].ulPin,
g_APinDescription[spiPin].ulPinConfiguration);
setClockDivider(_pin, 1);
// Default speed set to 500Khz
setClockDivider(_pin, 168);
setDataMode(_pin, SPI_MODE0);
}
@@ -41,12 +42,16 @@ void SPIClass::end() {
void SPIClass::setDataMode(uint8_t _pin, uint8_t _mode) {
uint32_t _channel = BOARD_PIN_TO_SPI_CHANNEL(_pin);
mode[_channel] = _mode | SPI_CSR_CSAAT;
// SPI_CSR_DLYBCT(1) keeps CS enabled for 32 MCLK after a completed
// transfer. Some device needs that for working properly.
SPI_ConfigureNPCS(spi, _channel, mode[_channel] | SPI_CSR_SCBR(divider[_channel]) | SPI_CSR_DLYBCT(1));
}
void SPIClass::setClockDivider(uint8_t _pin, uint8_t _divider) {
uint32_t _channel = BOARD_PIN_TO_SPI_CHANNEL(_pin);
divider[_channel] = _divider;
// SPI_CSR_DLYBCT(1) keeps CS enabled for 32 MCLK after a completed
// transfer. Some device needs that for working properly.
SPI_ConfigureNPCS(spi, _channel, mode[_channel] | SPI_CSR_SCBR(divider[_channel]) | SPI_CSR_DLYBCT(1));
}