add

GyverCore/cores/arduino/Client.h

@@ -0,0 +1,45 @@
+/*
+  Client.h - Base class that provides Client
+  Copyright (c) 2011 Adrian McEwen.  All right reserved.
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#ifndef client_h
+#define client_h
+#include "Print.h"
+#include "Stream.h"
+#include "IPAddress.h"
+
+class Client : public Stream {
+
+public:
+  virtual int connect(IPAddress ip, uint16_t port) =0;
+  virtual int connect(const char *host, uint16_t port) =0;
+  virtual size_t write(uint8_t) =0;
+  virtual size_t write(const uint8_t *buf, size_t size) =0;
+  virtual int available() = 0;
+  virtual int read() = 0;
+  virtual int read(uint8_t *buf, size_t size) = 0;
+  virtual int peek() = 0;
+  virtual void flush() = 0;
+  virtual void stop() = 0;
+  virtual uint8_t connected() = 0;
+  virtual operator bool() = 0;
+protected:
+  uint8_t* rawIPAddress(IPAddress& addr) { return addr.raw_address(); };
+};
+
+#endif

GyverCore/cores/arduino/IPAddress.cpp

@@ -0,0 +1,114 @@
+/*
+  IPAddress.cpp - Base class that provides IPAddress
+  Copyright (c) 2011 Adrian McEwen.  All right reserved.
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#include <Arduino.h>
+#include <IPAddress.h>
+
+IPAddress::IPAddress()
+{
+    _address.dword = 0;
+}
+
+IPAddress::IPAddress(uint8_t first_octet, uint8_t second_octet, uint8_t third_octet, uint8_t fourth_octet)
+{
+    _address.bytes[0] = first_octet;
+    _address.bytes[1] = second_octet;
+    _address.bytes[2] = third_octet;
+    _address.bytes[3] = fourth_octet;
+}
+
+IPAddress::IPAddress(uint32_t address)
+{
+    _address.dword = address;
+}
+
+IPAddress::IPAddress(const uint8_t *address)
+{
+    memcpy(_address.bytes, address, sizeof(_address.bytes));
+}
+
+bool IPAddress::fromString(const char *address)
+{
+    uint16_t acc = 0; // Accumulator
+    uint8_t dots = 0;
+
+    while (*address)
+    {
+        char c = *address++;
+        if (c >= '0' && c <= '9')
+        {
+            acc = acc * 10 + (c - '0');
+            if (acc > 255) {
+                // Value out of [0..255] range
+                return false;
+            }
+        }
+        else if (c == '.')
+        {
+            if (dots == 3) {
+                // Too much dots (there must be 3 dots)
+                return false;
+            }
+            _address.bytes[dots++] = acc;
+            acc = 0;
+        }
+        else
+        {
+            // Invalid char
+            return false;
+        }
+    }
+
+    if (dots != 3) {
+        // Too few dots (there must be 3 dots)
+        return false;
+    }
+    _address.bytes[3] = acc;
+    return true;
+}
+
+IPAddress& IPAddress::operator=(const uint8_t *address)
+{
+    memcpy(_address.bytes, address, sizeof(_address.bytes));
+    return *this;
+}
+
+IPAddress& IPAddress::operator=(uint32_t address)
+{
+    _address.dword = address;
+    return *this;
+}
+
+bool IPAddress::operator==(const uint8_t* addr) const
+{
+    return memcmp(addr, _address.bytes, sizeof(_address.bytes)) == 0;
+}
+
+size_t IPAddress::printTo(Print& p) const
+{
+    size_t n = 0;
+    for (int i =0; i < 3; i++)
+    {
+        n += p.print(_address.bytes[i], DEC);
+        n += p.print('.');
+    }
+    n += p.print(_address.bytes[3], DEC);
+    return n;
+}
+

GyverCore/cores/arduino/IPAddress.h

@@ -0,0 +1,78 @@
+/*
+  IPAddress.h - Base class that provides IPAddress
+  Copyright (c) 2011 Adrian McEwen.  All right reserved.
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#ifndef IPAddress_h
+#define IPAddress_h
+
+#include <stdint.h>
+#include "Printable.h"
+#include "WString.h"
+
+// A class to make it easier to handle and pass around IP addresses
+
+class IPAddress : public Printable {
+private:
+    union {
+	uint8_t bytes[4];  // IPv4 address
+	uint32_t dword;
+    } _address;
+
+    // Access the raw byte array containing the address.  Because this returns a pointer
+    // to the internal structure rather than a copy of the address this function should only
+    // be used when you know that the usage of the returned uint8_t* will be transient and not
+    // stored.
+    uint8_t* raw_address() { return _address.bytes; };
+
+public:
+    // Constructors
+    IPAddress();
+    IPAddress(uint8_t first_octet, uint8_t second_octet, uint8_t third_octet, uint8_t fourth_octet);
+    IPAddress(uint32_t address);
+    IPAddress(const uint8_t *address);
+
+    bool fromString(const char *address);
+    bool fromString(const String &address) { return fromString(address.c_str()); }
+
+    // Overloaded cast operator to allow IPAddress objects to be used where a pointer
+    // to a four-byte uint8_t array is expected
+    operator uint32_t() const { return _address.dword; };
+    bool operator==(const IPAddress& addr) const { return _address.dword == addr._address.dword; };
+    bool operator==(const uint8_t* addr) const;
+
+    // Overloaded index operator to allow getting and setting individual octets of the address
+    uint8_t operator[](int index) const { return _address.bytes[index]; };
+    uint8_t& operator[](int index) { return _address.bytes[index]; };
+
+    // Overloaded copy operators to allow initialisation of IPAddress objects from other types
+    IPAddress& operator=(const uint8_t *address);
+    IPAddress& operator=(uint32_t address);
+
+    virtual size_t printTo(Print& p) const;
+
+    friend class EthernetClass;
+    friend class UDP;
+    friend class Client;
+    friend class Server;
+    friend class DhcpClass;
+    friend class DNSClient;
+};
+
+const IPAddress INADDR_NONE(0,0,0,0);
+
+#endif

GyverCore/cores/arduino/Server.h

@@ -0,0 +1,30 @@
+/*
+  Server.h - Base class that provides Server
+  Copyright (c) 2011 Adrian McEwen.  All right reserved.
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#ifndef server_h
+#define server_h
+
+#include "Print.h"
+
+class Server : public Print {
+public:
+  virtual void begin() =0;
+};
+
+#endif

GyverCore/cores/arduino/Udp.h

@@ -0,0 +1,89 @@
+/*
+ *  Udp.cpp: Library to send/receive UDP packets.
+ *
+ * NOTE: UDP is fast, but has some important limitations (thanks to Warren Gray for mentioning these)
+ * 1) UDP does not guarantee the order in which assembled UDP packets are received. This
+ * might not happen often in practice, but in larger network topologies, a UDP
+ * packet can be received out of sequence. 
+ * 2) UDP does not guard against lost packets - so packets *can* disappear without the sender being
+ * aware of it. Again, this may not be a concern in practice on small local networks.
+ * For more information, see http://www.cafeaulait.org/course/week12/35.html
+ *
+ * MIT License:
+ * Copyright (c) 2008 Bjoern Hartmann
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ * 
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ * 
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * bjoern@cs.stanford.edu 12/30/2008
+ */
+
+#ifndef udp_h
+#define udp_h
+
+#include <Stream.h>
+#include <IPAddress.h>
+
+class UDP : public Stream {
+
+public:
+  virtual uint8_t begin(uint16_t) =0;  // initialize, start listening on specified port. Returns 1 if successful, 0 if there are no sockets available to use
+  virtual uint8_t beginMulticast(IPAddress, uint16_t) { return 0; }  // initialize, start listening on specified multicast IP address and port. Returns 1 if successful, 0 on failure
+  virtual void stop() =0;  // Finish with the UDP socket
+
+  // Sending UDP packets
+  
+  // Start building up a packet to send to the remote host specific in ip and port
+  // Returns 1 if successful, 0 if there was a problem with the supplied IP address or port
+  virtual int beginPacket(IPAddress ip, uint16_t port) =0;
+  // Start building up a packet to send to the remote host specific in host and port
+  // Returns 1 if successful, 0 if there was a problem resolving the hostname or port
+  virtual int beginPacket(const char *host, uint16_t port) =0;
+  // Finish off this packet and send it
+  // Returns 1 if the packet was sent successfully, 0 if there was an error
+  virtual int endPacket() =0;
+  // Write a single byte into the packet
+  virtual size_t write(uint8_t) =0;
+  // Write size bytes from buffer into the packet
+  virtual size_t write(const uint8_t *buffer, size_t size) =0;
+
+  // Start processing the next available incoming packet
+  // Returns the size of the packet in bytes, or 0 if no packets are available
+  virtual int parsePacket() =0;
+  // Number of bytes remaining in the current packet
+  virtual int available() =0;
+  // Read a single byte from the current packet
+  virtual int read() =0;
+  // Read up to len bytes from the current packet and place them into buffer
+  // Returns the number of bytes read, or 0 if none are available
+  virtual int read(unsigned char* buffer, size_t len) =0;
+  // Read up to len characters from the current packet and place them into buffer
+  // Returns the number of characters read, or 0 if none are available
+  virtual int read(char* buffer, size_t len) =0;
+  // Return the next byte from the current packet without moving on to the next byte
+  virtual int peek() =0;
+  virtual void flush() =0;	// Finish reading the current packet
+
+  // Return the IP address of the host who sent the current incoming packet
+  virtual IPAddress remoteIP() =0;
+  // Return the port of the host who sent the current incoming packet
+  virtual uint16_t remotePort() =0;
+protected:
+  uint8_t* rawIPAddress(IPAddress& addr) { return addr.raw_address(); };
+};
+
+#endif

GyverCore/cores/arduino/main.cpp

@@ -1,6 +1,6 @@
 /* Главный цикл программы */
 #pragma message "Нас тут заперли, вызовите 911!"
-#pragma message "GyverCore v1.10.0 inside. Enjoy"
+#pragma message "GyverCore v1.10.2 inside. Enjoy"
 
 #include <Arduino.h>
 

GyverCore/cores/arduino/pinOperation.cpp

@@ -7,6 +7,7 @@
 static uint8_t a_ref = DEFAULT;  // глобальная переменная для хранения опорного напряжения АЦП
 // ============= DIGITAL =============
 
+/*
 // service func
 uint8_t getOutputRegister(uint8_t pin) {
 	if (pin < 8) return &PORTD;
@@ -31,10 +32,10 @@ uint8_t getBitMask(uint8_t pin) {
 	else if (pin < 14) return (1 << (pin - 8));
 	else return (1 << (pin - 14));
 }
-
+*/
 void pinMode(uint8_t pin, uint8_t mode) {   
-	/*uint8_t oldSREG = SREG; // запомнинаем были ли включены прерывания
-	cli();//выключаем прерывания
+	//uint8_t oldSREG = SREG; // запомнинаем были ли включены прерывания
+	//cli();//выключаем прерывания
 	switch (mode) {
 	case 0: // input
 		if (pin < 8) bitWrite(DDRD, pin, 0);   // расставляем нули в DDRn
@@ -61,8 +62,8 @@ void pinMode(uint8_t pin, uint8_t mode) {
 		}
 		break;
 	}
-	SREG = oldSREG; // если прерывания не были включены - не включаем и наоборот*/
-	
+	//SREG = oldSREG; // если прерывания не были включены - не включаем и наоборот*/
+	/*
 	uint8_t *modeReg = getModeRegister(pin);
 	uint8_t *outputReg = getOutputRegister(pin);
 	uint8_t mask = getBitMask(pin);
@@ -77,12 +78,12 @@ void pinMode(uint8_t pin, uint8_t mode) {
 		*modeReg  &= ~ mask;
 		*outputReg |= mask;
 		return;
-	}
+	}*/
 }
 
 void digitalWrite(uint8_t pin, uint8_t x) {
-	uint8_t oldSREG = SREG; // запомнинаем были ли включены прерывания
-	cli();//выключаем прерывания
+	//uint8_t oldSREG = SREG; // запомнинаем были ли включены прерывания
+	//cli();//выключаем прерывания
 	switch (pin) { // откл pwm
 	case 3:  // 2B
 		TCCR2A &= ~(1 << COM2B1);
@@ -106,7 +107,7 @@ void digitalWrite(uint8_t pin, uint8_t x) {
 	if (pin < 8) bitWrite(PORTD, pin, x);
 	else if (pin < 14) bitWrite(PORTB, (pin - 8), x);
 	else if (pin < 20) bitWrite(PORTC, (pin - 14), x);
-	SREG = oldSREG; // если прерывания не были включены - не включаем и наоборот
+	//SREG = oldSREG; // если прерывания не были включены - не включаем и наоборот
 	
 	/*uint8_t *outputReg = getOutputRegister(pin);
 	uint8_t mask = getBitMask(pin);
@@ -115,13 +116,13 @@ void digitalWrite(uint8_t pin, uint8_t x) {
 }
 
 void digitalToggle(uint8_t pin){
-	uint8_t oldSREG = SREG; // запомнинаем были ли включены прерывания
-	cli();//выключаем прерывания
+	//uint8_t oldSREG = SREG; // запомнинаем были ли включены прерывания
+	//cli();//выключаем прерывания
 	if (pin < 8) bitToggle(PORTD, pin);
 	else if (pin < 14) bitToggle(PORTB, pin - 8);
 	else if (pin < 20) bitToggle(PORTC, pin - 14);
 
-	SREG = oldSREG; // если прерывания не были включены - не включаем и наоборот
+	//SREG = oldSREG; // если прерывания не были включены - не включаем и наоборот
 	
 	/*uint8_t *outputReg = getOutputRegister(pin);
 	uint8_t mask = getBitMask(pin);

GyverCore/platform.txt

@@ -5,7 +5,7 @@
 # https://github.com/arduino/Arduino/wiki/Arduino-IDE-1.5-3rd-party-Hardware-specification
 
 name=GyverCore
-version=1.8.4
+version=1.10.2
 
 # AVR compile variables
 # ---------------------

README.md

@@ -268,4 +268,7 @@ parseFloat      | 1070    | 246       | 824
 	- Добавлен avr-gcc v8 под Win32 и Linux
 	- Ускорен IO
 - 1.10.1
-	- IO откатили назад из за непонятных багов
+	- IO откатили назад из за непонятных багов
+- 1.10.2
+	- Пара багфиксов с IO
+	- Вернули заголовочные для WiFi

package_GyverCore_index.json

@@ -288,6 +288,20 @@
             {"name": "ATmega328 based boards"}
           ],
           "toolsDependencies": []
+        },
+		{
+          "name": "GyverCore",
+          "architecture": "avr",
+          "version": "1.10.2",
+          "category": "Contributed",
+          "url": "https://github.com/AlexGyver/GyverCore/releases/download/GyverCore-1.10.2/GyverCore.zip",
+          "archiveFileName": "GyverCore.zip",
+          "checksum": "MD5:dd4bb5fe199eaed4c11fe9f5df47cf04",
+          "size": "59027456",
+          "boards": [
+            {"name": "ATmega328 based boards"}
+          ],
+          "toolsDependencies": []
         }
       ],
       "tools": []