This document is intended to get you started, and get a few things working. You are strongly encouraged to read the rest of the SSL documentation, and arrive at a deeper understanding of the material, before progressing to the advanced techniques.
Your SSL configuration will need to contain, at minimum, the following directives.
The following enables only the strongest ciphers:
While with the following configuration you specify a preference for specific speed-optimized ciphers (which will be selected by mod_ssl, provided that they are supported by the client):
Obviously, a server-wide Location
blocks, to give a per-directory solution, and can automatically force
a renegotiation of the SSL parameters to meet the new configuration.
This can be done as follows:
The Online Certificate Status Protocol (OCSP) is a mechanism for determining whether or not a server certificate has been revoked, and OCSP Stapling is a special form of this in which the server, such as httpd and mod_ssl, maintains current OCSP responses for its certificates and sends them to clients which communicate with the server. Most certificates contain the address of an OCSP responder maintained by the issuing Certificate Authority, and mod_ssl can communicate with that responder to obtain a signed response that can be sent to clients communicating with the server.
Because the client can obtain the certificate revocation status from the server, without requiring an extra connection from the client to the Certificate Authority, OCSP Stapling is the preferred way for the revocation status to be obtained. Other benefits of eliminating the communication between clients and the Certificate Authority are that the client browsing history is not exposed to the Certificate Authority and obtaining status is more reliable by not depending on potentially heavily loaded Certificate Authority servers.
Because the response obtained by the server can be reused for all clients using the same certificate during the time that the response is valid, the overhead for the server is minimal.
Once general SSL support has been configured properly, enabling OCSP Stapling generally requires only very minor modifications to the httpd configuration — the addition of these two directives:
These directives are placed at global scope (i.e., not within a virtual
host definition) wherever other global SSL configuration directives are
placed, such as in conf/extra/httpd-ssl.conf for normal
open source builds of httpd, /etc/apache2/mods-enabled/ssl.conf
for the Ubuntu or Debian-bundled httpd, etc.
This particular shmcb prefix on the
directive's argument). This module is usually enabled already for
You can use the openssl command-line program to verify that an OCSP response is sent by your server:
$ openssl s_client -connect www.example.com:443 -status -servername www.example.com
...
OCSP response:
======================================
OCSP Response Data:
OCSP Response Status: successful (0x0)
Response Type: Basic OCSP Response
...
Cert Status: Good
...
The following sections highlight the most common situations which require
further modification to the configuration. Refer also to the
OCSP responses are stored in the SSL stapling cache. While the responses are typically a few hundred to a few thousand bytes in size, mod_ssl supports OCSP responses up to around 10K bytes in size. With more than a few certificates, the stapling cache size (32768 bytes in the example above) may need to be increased. Error message AH01929 will be logged in case of an error storing a response.
Refer to the
You can confirm that a server certificate points to an OCSP responder using the openssl command-line program, as follows:
$ openssl x509 -in ./www.example.com.crt -text | grep 'OCSP.*http' OCSP - URI:http://ocsp.example.com
If the OCSP URI is provided and the web server can communicate to it directly without using a proxy, no configuration is required. Note that firewall rules that control outbound connections from the web server may need to be adjusted.
If no OCSP URI is provided, contact your Certificate Authority to
determine if one is available; if so, configure it with
Add SSLUseStapling Off to the virtual hosts for which OCSP
Stapling should be disabled.
Several directives are available to handle timeouts and errors. Refer
to the documentation for the
AH02217: ssl_stapling_init_cert: Can't retrieve issuer certificate!
In order to support OCSP Stapling when a particular server certificate is used, the certificate chain for that certificate must be configured. If it was not configured as part of enabling SSL, the AH02217 error will be issued when stapling is enabled, and an OCSP response will not be provided for clients using the certificate.
Refer to the
When you know all of your users (eg, as is often the case on a corporate
Intranet), you can require plain certificate authentication. All you
need to do is to create client certificates signed by your own CA
certificate (ca.crt) and then verify the clients against this
certificate.
To force clients to authenticate using certificates for a particular URL,
you can use the per-directory reconfiguration features of
The key to doing this is checking that part of the client certificate
matches what you expect. Usually this means checking all or part of the
Distinguished Name (DN), to see if it contains some known string.
There are two ways to do this, using either
The
The password used in this example is the DES encrypted string "password".
See the
/C=DE/L=Munich/O=Snake Oil, Ltd./OU=Staff/CN=Foo:xxj31ZMTZzkVA /C=US/L=S.F./O=Snake Oil, Ltd./OU=CA/CN=Bar:xxj31ZMTZzkVA /C=US/L=L.A./O=Snake Oil, Ltd./OU=Dev/CN=Quux:xxj31ZMTZzkVA
When your clients are all part of a common hierarchy, which is encoded
into the DN, you can match them more easily using
These examples presume that clients on the Intranet have IPs in the range
192.168.1.0/24, and that the part of the Intranet website you want to allow
internet access to is /usr/local/apache2/htdocs/subarea.
This configuration should remain outside of your HTTPS virtual host, so
that it applies to both HTTPS and HTTP.
info may already be too much. Remember that you can
configure the