Run "make update-copyright" and then...
* gnulib: Update to latest with copyright year adjusted.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
* bootstrap.conf (gnulib_modules): Remove explicit mention of threadlib.
It was added back in 2012 to avoid a bootstrap failure; that explicit
mention has long been unnecessary.
Discussed in https://lists.gnu.org/r/sed-devel/2018-10/msg00001.html .
* NEWS: Mention change.
* bootstrap.conf: Add gnulib's binary-io module.
* sed/sed.c (main): Set stdin/stdout to binary mode if needed.
* sed/utils.c (ck_mkstemp): Explicitly set binary mode on file
descriptor. It seems that on (non-cygwin) Windows the fdopen(3) call
ignores the 'b' in the 'mode' argument - and the file was always opened
in O_TEXT mode. Thus "--binary" was not working with "--inplace".
For development builds (using ./bootstrap), require texinfo version 6.1
or later (Same as GNU coreutils).
Sed's manual uses texinfo's @U{} command, introduced in texinfo-6.0.
This should not affect building from released tarballs, as the info
manual is pre-built and pre-packaged in the tar archive.
Reported by Dennis Clarke in https://bugs.gnu.org/28665#14 .
* bootstrap.conf: Require makeinfo 6.1 (up from 4.13).
Switching to non-recursive makefiles broke the 'install-html' target:
The gettext plumbing requires an 'install-html' target in po/Makefile.
This was fixed in gettext v0.19.8.1-41-ge5a008a, but packages using
older gettext need to manually patch po/Makefile.in.in.
Report and suggested fix by Eric Blake in https://debbugs.gnu.org/25690 .
* bootstrap.conf (bootstrap_epilogue): Add 'install-{html,pdf,dvi,ps}'
targets to po/Makefile.in.in (if needed).
* bootstrap.conf: Add gnulib's fdl module.
* doc/sed-in.texi: Update license blurb to latest recommended text.
Remove duplicated copyright information from title page (copied from
coreutil's texinfo style). Include fdl.texi in a new appendix.
Sed incorrectly matches the anchor '^' to a newline character
(ASCII 10) despite using NUL line terminators (-z).
See https://bugs.gnu.org/24615 .
Previous (incorrect) behavior:
$ printf "a\0b\0" | sed -z 'N;s/^/X/mg;' | od -An -a
X a nul b nul
With this fix:
$ printf "a\0b\0" | sed -z 'N;s/^/X/mg;' | od -An -a
X a nul X b nul
Current regex engine can not handle NUL multiline anchors.
Implement such search manually (by breaking the pattern into separate
NUL-terminated lines) and searching each one individually.
* NEWS: Mention it.
* sed/regexp.c (compile_regex_1): Don't use newline_anchor of regex, if
the buffer delimiter is not newline character.
(match_regex): Do above case line-by-line.
* testsuite/zero-anchor.good, testsuite/zero-anchor.inp,
testsuite/zero-anchor.sed: New test.
* testsuite/local.mk: Add the test.
* testsuite/Makefile.tests: Add the test.
* bootstrap.conf: Add memrchr.
* lib/.gitignore, m4/.gitignore: Ignore memrchr files.
* .gitignore: Ignore '.dirstamp' files
* bootstrap.conf: Add 'non-recursive-gnulib-prefix-hack' gnulib module.
Add missing 'stdalign' module.
(bootstrap_post_import_hook): Use module to adjust gnulib.mk file.
* configure.ac: Add 'subdir-objects' automake option, don't generate
makefiles in subdirectories. Adjust path of XFAIL tests.
* Makefile.am: Include 'local.mk' files, adjust for non-recursive make.
* doc/Makefile.am: Rename to ...
* doc/local.mk: Adjust paths. Rename SED to
SEDBIN variable, to avoid overriding the default system-wide SED value
which is automatically set by autotools.
* lib/Makefile.am: Rename to ...
* lib/local.mk: Adjust paths.
* lib/.gitignore: Ignore 'stdalign.h' from gnulib module.
* sed/Makefile.am: Rename to ...
* sed/local.mk: Adjust paths.
* testsuite/Makefile.am: Rename to ...
* testsuite/local.mk: Adjust paths.
* testsuite/init.cfg: Move to ...
* init.cfg: ... here. Moved to avoid changing the path in init.sh, and to
keep the same directory structure as coreutils.
(require_en_utf8_locale_): Adjust path for get-mb-cur-max executable.
(require_ja_shiftjis_locale_,require_valid_ja_shiftjis_locale_): Adjust
path for test-mbrtowc executable.
* m4/.gitignore: Add gnulib's non-recusive-make module.
* testsuite/runtest: Adjust paths of Makefile.tests and dir variables,
Skip utility program 'get-mb-cur-max' which is not a standalone test.
* testsuite/Makefile.tests: Adjust path of sed exeutable.
* testsuite/eval.sed, testsuite/eval.good: Adjust path of sed executable.
* testsuite/cmd-R.sh,
testsuite/cmd-l.sh,
testsuite/colon-with-no-label.sh,
testsuite/comment-n.sh,
testsuite/compile-errors.sh,
testsuite/compile-tests.sh,
testsuite/convert-number.sh,
testsuite/execute-tests.sh,
testsuite/follow-symlinks-stdin.sh,
testsuite/follow-symlinks.sh,
testsuite/help-version.sh,
testsuite/in-place-hyphen.sh,
testsuite/in-place-suffix-backup.sh,
testsuite/invalid-mb-seq-UMR.sh,
testsuite/mb-bad-delim.sh,
testsuite/mb-charclass-non-utf8.sh,
testsuite/mb-match-slash.sh,
testsuite/mb-y-translate.sh,
testsuite/normalize-text.sh,
testsuite/nulldata.sh,
testsuite/panic-tests.sh,
testsuite/posix-char-class.sh,
testsuite/posix-mode-N.sh,
testsuite/posix-mode-addr.sh,
testsuite/posix-mode-bad-ref.sh,
testsuite/posix-mode-s.sh,
testsuite/range-overlap.sh,
testsuite/recursive-escape-c.sh,
testsuite/regex-errors.sh,
testsuite/stdin-prog.sh,
testsuite/subst-mb-incomplete.sh,
testsuite/subst-options.sh,
testsuite/subst-replacement.sh,
testsuite/temp-file-cleanup.sh,
testsuite/unbuffered.sh: Adjust paths of init.sh, sed executable.
Sed tests purposefully use invalid non-utf8 multibyte sequences to
test sed's handling of invalid input/program.
Some implementations wrongly accept invalid sequences, causing false
alarms. Add a test program to detect such buggy implementations and skip
the tests if needed.
See discussion in:
http://lists.gnu.org/archive/html/sed-devel/2016-07/msg00005.htmlhttp://lists.gnu.org/archive/html/sed-devel/2016-07/msg00000.htmlhttp://lists.gnu.org/archive/html/sed-devel/2016-06/msg00031.htmlhttp://lists.gnu.org/archive/html/sed-devel/2016-06/msg00014.html
* bootstrap.conf: Add gnulib's closeout module.
* m4/.gitignore, lib/.gitignore, po/POTFILES.in: Adjust after adding
closeout module.
* testsuite/Makefile.am (check_PROGRAMS): Add new program.
* testsuite/test-mbrtowc.c: New program.
* testsuite/init.cfg (require_valid_ja_eucjp_locale_)
(require_valid_ja_shiftjis_locale_): New functions. Call test-mbrtowc
with known invalid multibyte sequences to ensure implementation is not
buggy and rejects them; Skip test otherwise.
* testsuite/invalid-mb-seq-UMR.sh: Use require_valid_ja_eucjp_locale_.
* testsuite/mb-charclass-non-utf8.sh: Use require_valid_ja_shiftjis_locale_.
bootstrap.conf: Add the module name.
configure.ac: Copy boilerplate and exclusions from coreutils.
sed/Makefile.am (AM_CFLAGS): Define in terms of the two new
variables, $(WARN_CFLAGS) and $(WERROR_CFLAGS).
m4/.gitignore: Add the two new .m4 files.
* configure.ac: Turn on silent rules, by default.
Use git-derived versions all the time. Required a new, signed
v4.2.2 tag, which I've pushed.
Distribute .tar.xz tarballs, not .bzip2 or .gz.
* Makefile.am (AUTOMAKE_OPTIONS): Remove.
* bootstrap.conf (gnulib_modules): Add git-version-gen.
* ChangeLog-2014: Renamed from ChangeLog.
* po/ChangeLog-2014: Renamed from po/ChangeLog.
* Makefile.am (EXTRA_DIST): Add the two new file names.
(dist-hook): Generate ChangeLog at tarball-creation time.
(gen-ChangeLog): New rule. Just like the one in coreutils and grep.
* bootstrap.conf (gnulib_modules): Add the modules, readme-release
and gitlog-to-changelog, and revamp to be much more like grep and
coreutils.
* lib/Makefile.am: Update.
headers.
2013-10-06 Jose E. Marchesi <jemarch@gnu.org>
* basicdefs.h (PATH_MAX): Defined to some constant in case it is
not defined by system headers.
* sed/utils.c: Do not include pathmax.h anymore.
* bootstrap.conf (gnulib_modules): Do not use the gnulib module
pathmax.
Without this change, trying to bootstrap GNU sed from a freshly-cloned
Git checkout aborts with an error like this:
./bootstrap: aclocal --force -I m4 ...
./bootstrap: autoconf --force ...
configure.ac:20: error: possibly undefined macro: gl_DISABLE_THREADS
If this token and others are legitimate, please use m4_pattern_allow.
See the Autoconf documentation.
* bootstrap.conf (gnulib_modules): Add 'threadlib'.
Copyright-paperwork-exempt: yes
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>