Discarding a file or directory in the files panel runs git commands on
these paths only, and these leave SQUASH_MSG alone. If users discard
all changes of a squash merge this way, lazygit keeps showing a merge
in progress, and the next commit gets the squash merge message.
Abort the squash merge after "Discard all changes" if no changes are
left. Untracked files don't count, because a squash merge stages the
files that it adds.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Discarding a nested repository deletes its directory like that of any
untracked file. If the repository keeps its git dir in its directory,
this deletes all of its history, and nothing said so. The directory of
a removed submodule keeps its git dir elsewhere, but it may have
changes that aren't committed.
Check for both before discarding. If anything would be lost, list it
and ask for confirmation.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
If you staged the directory of a removed submodule, a nested repository
or a worktree inside the repo, git added it as an embedded repository: a
gitlink without an entry in .gitmodules. For a removed submodule, this
brings it back in a broken state. git warns about it, but lazygit didn't
show the warning. Staging all files did the same to every such
directory.
Disable staging a selection that contains one of these, and disable
staging all files if that would stage one. The disabled reason tells you
how to get rid of it.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Selecting one of these in the files panel showed the error "Could not
access 'modules/sub/null'". The main view showed the entry's diff
against /dev/null with --no-index, as for an untracked file. When git
compares a file with a directory that way, it looks for a file of the
same name inside the directory.
Show what the directory is and what to do about it instead. Below that,
show the status of the repository that it is, or the files in it if it
is a plain directory. The status tells you whether discarding the
directory would lose anything.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Which pane a side of a file's diff appeared in depended on what else the file
had: the staged side had the lower pane while there were unstaged changes
above it, and took over the upper one when there weren't. So the same content
moved about, and which side a pane was showing was something the code had to
work out from the file's status rather than knowing from the pane.
Now each side has a pane of its own — unstaged above, staged below — shown
when there is something on it. A file with nothing unstaged shows its staged
changes in the lower pane alone, which then has the whole space, including
the label of the key that focuses it.
Nothing about this is visible to the user: the same diff appears in the same
place, with the same title and the same label, and the same keys focus and
scroll it. What it is for is the code, which no longer has to ask the file
what a pane is showing — and, once the diff can be staged from, no longer has
to make one key mean opposite things in the same pane.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
A pane that has been emptied is showing nothing, but it kept the scroll
position it was left at and went on claiming the render it used to show,
so the next render into it — the same command's output, the file it was
showing being selected again — counted as content the view already had,
and was revealed partway down.
So say what the empty pane is: at the top, and showing nothing that a
render can be a re-render of.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
A pane the render has nothing to show is emptied, but keeps the scroll
position it was left at and its claim to the render it was showing. So
when it comes back — the file it was showing before is selected again —
its content is rendered under the same command it already had, which is
taken for the content the view is showing, and the user is left partway
down a diff they have only just been given.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Git limits its tree diff by the pathspec before it looks for renames, so
a directory only ever gets one end of a rename whose other end is outside
it. Nothing is left to pair up, and the file turns into an addition or a
deletion that the commit doesn't contain.
Pass the other end along with the directory. This is bounded by the
number of renames that cross the directory's boundary, so it costs
nothing at all for the vast majority of commits.
Restricting the diff to the files that a filter leaves visible drops the
delete-side entry of a staged rename, so git shows the file as an
addition instead. Its commit files counterpart already passes both paths;
this brings the files panel in line.
Pathspec limiting happens before rename detection in git's tree diff, so
filtering the diff to a directory hides the delete-side entry of a rename
whose other end is outside that directory. Git then has nothing to pair
up, and reports a file moved into the directory as an addition and one
moved out of it as a deletion.
Selecting a directory is supposed to filter the commit's diff down, never
to change it, so both are wrong.
When there is a single conflicting file left to be resolved, lazygit
dismisses the conflicted-files-only filter when the file no longer has
conflict markers. However, the selection moved to the top, which is
annoying because very often it is useful to look at that file's
resulting diff once more to confirm that conflicts were resolved
correctly, and finding it again can be cumbersome when there are many
changed files. So keep it selected.
Of course, this only helps for the last (or only) conflicted files; when
there are multiple, a resolved file disappears from the panel until all
are resolved, which makes it hard to double-check the resulting diffs.
Doing it afterwards is not easy because you'd have to remember which
files were conflicting. This needs a different solution, but for the
special case of only a single conflicting file this is already a big
improvement.
Besides the misleading error about submodules, the command crashes when
it runs before the first files refresh has come in: the file tree
doesn't exist yet at that point, and staging all of a tree that isn't
there dereferences a nil root node. That is easy to hit in a big repo,
where `git status` takes a moment while the panel sits there empty.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The stage-all command acts on the whole file tree, and nothing stops it
from doing that when the tree is empty. It ends up in the branch that
explains why a submodule couldn't be staged, which has nothing to do
with what the user did.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
When conflicts of an in-progress rebase/merge/cherry-pick/revert are
resolved, lazygit pops up a prompt offering to continue it. This is
helpful when you started the operation in lazygit and resolved the
conflicts in your editor. But it's confusing when the operation was
started outside lazygit — e.g. by a coding agent in another terminal
that resolves the conflicts but hasn't continued yet because it's still
running tests or fixing the build. lazygit would then prompt unbidden.
Track whether the in-progress operation was started from within lazygit,
and only show the prompt in that case. We record this right after running
a merge/rebase step (in CheckMergeOrRebaseWithRefreshOptions, the
subprocess branch of genericMergeCommand, and the custom-command
conflict path), and clear it whenever a refresh observes that no
operation is in progress — which also handles an operation that was
finished or aborted externally.
The conflict-resolution tests start their operation by running git
directly (not through lazygit's UI), so they call the new test helper
Common.PretendMergeOrRebaseStartedInLazygit to have lazygit treat the
operation as its own and still get the prompt.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Change the tests so that they run in a linked worktree; this uncovers the bug
that copying a file's absolute path uses the main repo path rather than the
worktree's path.
Set the sort order's default from the former foldersFirst to mixed, so this is a
change in behavior. I find this useful because it now matches git's order, so if
you look at the diff of a commit, the TOC at the top has the same order as the
file tree you see when entering the commit.
Previously it would iterate over all changed files and call git checkout or git
reset for each one, which can take forever if there are hundreds or thousands of
files. Now it batches these into a single command if possible (taking care of
still passing the individual path names to the git call rather than just the
directory, which is necessary for making it work correctly when filtering --
this was actually broken for the "Discard unstaged changes" command, which is
fixed here).
When discarding a directory, we only want to discard those files that are
visible in the current filter view. The tests show that this already works
correctly for discarding all changes, but it doesn't for discarding only
unstaged changes: in this case, untracked files are handled correctly, but
changes to tracked files are discarded without respecting the filter.
When .git/info directory does not exist (can happen with bare clones
or manual deletion), the Exclude function failed with 'no such file
or directory'. Added os.MkdirAll to create the directory before
opening the exclude file.
Added integration test exclude_without_info_dir that removes .git/info
before attempting to exclude a file.
Paths added to ignore/exclude files need to be prefixed with a forward
slash to point to a specific file in the directory tree.
Without that prefix a file at root called `file` (added to `.gitignore`
as `file`) would match with `./file` and `./src/file`.
When you are in the middle of a rebase, and you cherry-pick a commit which
conflicts, it helps to be clear on whether you are prompted to continue the
cherry-pick or the rebase.
For #, !, [, and ], the problem is that it doesn't ignore the file because the
special characters need to be quoted. For *, the problem is that it ignores too
much (it also hides the abc_def file because the * is treated as a glob).
Renaming a file inside the same directory shows it with its full path in the
tree view, which isn't what we want. We'll fix this in the next commit.
Also adding a few other test cases for moving files; they show that the display
of moved files in tree view isn't ideal. For example, moving file1 from top
level into dir shows it as "R file1 → file1", which isn't distinguishable from
renaming file1 inside dir. I suppose what we would like to have here is
"R ../file1 → file1" or something, but I'll leave that for the future; here I
only want to fix the regression that was introduced with the root item PR.
Assert the entire lines using Equals instead of Contains. This makes the tests a
bit easier to read, and it makes it much easier to decide how they need to be
changed when we change the layout (like we do in the last commit of this
branch).
It is true that this requires changing all these tests for any future UI
changes, but I think this is a good price to pay; those adaptions are trivial
and can be done without thinking.
Change our fake clipboard command to not append a linefeed; that's closer to
what the production code does.
This allows us to use Equals instead of Contains for checking the clipboard
contents.
Finally, use FileSystem().FileContent() to assert the clipboard contents,
instead of selecting the clipboard file and then checking the diff view.
As part of this, you must now press enter on a merge conflict file
to focus the merge view; you can no longer press space and if you do
it will raise an error.
We want to show an error when the user tries to invoke an action that expects only
a single item to be selected.
We're using the GetDisabledReason field to enforce this (as well as DisabledReason
on menu items).
I've created a ListControllerTrait to store some shared convenience functions for this.
I don't know why we're getting index.lock errors but they're impossile to stop
anyway given that other processes can be calling git commands. So we're retrying
a few times before re-raising. To do this we need to clone the command and the current
implementation for that is best-effort.
I do worry about the maintainability of that but we'll see how it goes.
Also, I thought you'd need to clone the task (if it exists) but now I think not;
as long as you don't call done twice on it you should be fine, and you shouldn't
be done'ing a task as part of running a command: that should happen higher up.
We have not been good at consistent casing so far. Now we use 'Sentence case' everywhere. EVERYWHERE.
Also Removing 'Lc' prefix from i18n field names: the 'Lc' stood for lowercase but now that everything
is in 'Sentence case' there's no need for the distinction.
I've got a couple lower case things I've kept: namely, things that show up in parentheses.