When pushing master, lazygit offers to push other branches along with
it if they were merged into master locally and have unpushed commits.
Pulling master offers to update such branches in the same way. These
branches aren't part of a stack, so the menu only adds an extra step to
an ordinary push or pull.
This happens because a branch counts as stacked below the current one
if its tip is one of the current branch's commits that aren't merged
into a main branch yet. A commit's merged status only looks at the
remote branch of each main branch. So until master is pushed, the
commits that were merged into it locally count as unmerged. The same
goes for pushing or pulling a feature branch on top of such a master.
Treat the commits that a local main branch contains as merged too, so
that the search for stacked branches stops at a main branch.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The commits view marks the commits that a bisect hasn't ruled out yet
with a "?". To find them, it looks for the bad commit and the first good
commit in the list, and marks the commits between them. If there's no
good commit in the list, it marks none. This is the case while git
tests the merge base of a good and a bad commit on different branches.
It's also the case early in a long bisect, when the good commit is
further down than the commits that we load. With merges, the commits
between the two can also include some that the bisect has ruled out.
Ask git instead, with "git rev-list <bad> --not <good>...", when
refreshing the commits while git knows both a good and a bad commit.
This takes about as long as the git log that loads the commits, or
less, and it gets faster as the bisect goes on. Keep only the commits
that the commits view has loaded, because git may list many more.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
When the user marks the last commit to test, the commits view keeps it
selected, and the user has to look for the result. The same happens
when lazygit starts after a bisect has finished.
After a mark, git checks out the next commit to test, unless there's
nothing left to test. In that case, the commit that the user marked
last is still the current commit, and the commit marked bad is the
first bad commit. So once the current commit is marked, select the
commit marked bad instead. Do the same if git never checked out a
commit to test, because the good commit is a parent of the bad one.
If only skipped commits are left to test, the first bad commit is
either one of them or the commit marked bad. Select the commit marked
bad then too; it's the newest of the candidates.
The commits view loads the commits down to the commit that it selects,
so this one is always loaded.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The commits view loads the first 300 commits only. If the range to
bisect is longer than about 600 commits, the commit that git wants the
user to test is further down than that, so it isn't shown, and we can't
select it.
While bisecting, count the commits in the log above the current commit,
and load that many more than usual.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The commits and sub-commits views load the first 300 commits, and load
all of them once the user selects a commit beyond the 200th. A later
commit loads more than 300 commits while bisecting, so that the commit
to test is among them. If it is beyond the 200th, it would cause all
commits to be loaded as soon as it gets selected.
Remember how many commits the views were loaded with, and load all of
them only when the selection gets within 100 commits of that number.
For the views loaded with 300 commits, nothing changes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The commit loader took a flag for whether to limit the number of
commits it loads, and the limit of 300 was hard-coded in it. A later
commit needs to load more than that while bisecting, so let the caller
pass the number.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Once a bisect had started, the commits view showed the log of the
branch that was checked out when it started, even while git was still
waiting for a good or a bad commit. If the user checked out a different
branch to mark its head as bad, its commits weren't shown.
Keep showing the log of HEAD until git starts checking out commits to
test.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
If lazygit starts while a bisect is in progress, the commits view
selects the top commit, and the user has to look for the commit that
git wants them to test. The same happens when a git bisect command run
outside of lazygit moves the bisect on.
The bisect menu selected the new current commit after a good, bad or
skip, but only if the selected commit was the current one. It also
needed extra logic to wait for the refresh in case the log was going to
start from a different ref.
Remove that, and let the commits refresh select the current commit
whenever it differs from the one at the previous refresh, like it does
for a newly conflicted commit. A refresh that doesn't change it leaves
the selection alone. This way a background fetch doesn't move the
selection back to the current commit after the user navigated away from
it.
Marking the current commit as good or bad while a different commit is
selected now selects the new current commit too.
Skipping the selected commit when it isn't the current one is an
exception. Git often picks a different commit to test after that, but
we keep the skipped commit selected, so that the user can go on
skipping commits near it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
When a refresh finds a new conflicted commit, it selects it so that the
user sees where the rebase stopped. A background refresh keeps the
scroll position of the views it updates though. If the conflicted
commit is outside the visible part of the commits view, the selection
moves to a commit that the user can't see.
Scroll the selection into view whenever the refresh moves it to a newly
conflicted commit.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The commits refresh updated the model and the selection in one hop to
the UI thread, and re-rendered the view in a second one. The scroll
behavior of the re-render was fixed when the refresh started.
The next commit makes the scroll behavior depend on how the refresh
changed the selection. Do both in one hop, so that the re-render can
see that.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Two places pass plain text as the format string of TextStyle.Sprintf
without further arguments: the prefix of a disabled menu item's
tooltip, and the key binding entries of the options bar. If the text
contains a "%", for example in a translation or in a key label, it is
mangled into something like "%!(NOVERB)".
go vet doesn't report these calls yet. It will once go.mod says go
1.26, because vet then also finds printf wrappers through interface
methods. TextStyle.Sprintf forwards to the Sprintf method of the
Sprinter interface.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
If nothing is staged, committing offers to stage all files first, or
stages them without asking if gui.skipNoStagedFilesWarning is set. Like
staging all files in the files panel, this adds a nested repository as
an embedded repository.
Show why the nested repository can't be staged instead, as staging all
files in the files panel does.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
If you staged the directory of a removed submodule, a nested repository
or a worktree inside the repo, git added it as an embedded repository: a
gitlink without an entry in .gitmodules. For a removed submodule, this
brings it back in a broken state. git warns about it, but lazygit didn't
show the warning. Staging all files did the same to every such
directory.
Disable staging a selection that contains one of these, and disable
staging all files if that would stage one. The disabled reason tells you
how to get rid of it.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Selecting one of these in the files panel showed the error "Could not
access 'modules/sub/null'". The main view showed the entry's diff
against /dev/null with --no-index, as for an untracked file. When git
compares a file with a directory that way, it looks for a file of the
same name inside the directory.
Show what the directory is and what to do about it instead. Below that,
show the status of the repository that it is, or the files in it if it
is a plain directory. The status tells you whether discarding the
directory would lose anything.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
If a linked worktree lives inside the repo's working tree, it shows up
in the files panel. Discarding it there deleted its directory like that
of any untracked file. git still had the worktree on record, so the
worktrees panel listed it as missing, and its branch couldn't be checked
out anywhere else until the worktree was pruned.
Show the same menu for removing the worktree as the worktrees panel
does. Like a submodule, a worktree can't be discarded together with
other entries, because it has a menu of its own.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
git status doesn't descend into a nested repository, such as the
directory that a removed submodule leaves behind. It reports the
directory as a whole, with a trailing slash. The file tree splits paths
at slashes, so it showed a directory with a file without a name in it.
Discarding the directory removed it, but then the cleanup of emptied
directories took the parent of "modules/sub/" to be "modules/sub"
itself, and failed to read it.
Take the slash off when loading the files. This also covers any
untracked directory if status.showUntrackedFiles is "normal", and linked
worktrees inside the repo. Their slash was taken off when they were
marked as worktrees; this is no longer needed.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
If the repo or linked worktree that lazygit has open is deleted while
lazygit is running, every git command fails. lazygit no longer panics
since the previous commit, but it shows empty lists, and there's
nothing useful left to do in it.
Check at the start of every refresh whether the worktree and its git
dir still exist. If one of them is gone, quit and print its path in
the terminal. The background files refresh does this check too, so
lazygit quits within ten seconds even if nobody is using it. To quit
from a refresh, return an error that wraps gocui.ErrQuit; this keeps
it out of the error popup.
Switching to another worktree or to a recent repo would be an
alternative, but it would be more surprising than quitting. Also,
there isn't always a main worktree to switch to.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The next commit makes performRefresh return early right after the
capture, and it must not leave the input blocked when it does.
This doesn't let any keypress slip through before the block begins.
Only refreshes on the UI thread block input, and there the capture
runs synchronously.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
time.AfterFunc and errgroup.Group.Go run the function they are given
on a goroutine of their own, so a panic in it leaves the terminal in
raw mode, like a panic in any other goroutine that doesn't use
utils.Safe.
Add utils.SafeFunc and utils.SafeFuncWithError, which return a copy
of a function that runs through utils.Safe or utils.SafeWithError, and
use them for the functions given to time.AfterFunc and errgroup.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Most goroutines run their function through utils.Safe, which closes
the screen if the function panics. Without it, the panic is printed to
a terminal that is still in raw mode and on the alternate screen, and
the terminal needs a reset afterwards. Go has no process-wide hook for
panics, so every goroutine has to do this itself.
Use utils.Safe for the goroutines that don't use it yet.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Under a diff renderer that states which diff line each row shows, such
as delta, the queries about the lines of the main view read the rows by
those records alone. Still, they took the text of every row as well,
and for a diff of 300,000 lines this was most of the time each of them
took. Moving the selection by change block runs two of them for every
key press.
Take the records of the rows first, and their text only if no row
states a diff line.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Every query about the lines of the main view, such as moving the
selection to the next change block, finds out which line of which file
each row shows. For every row, this joined the path that the diff
states with the path of the worktree. In a diff of 300,000 lines, this
took more than half of the time of the query.
The lines of a diff come file by file, so remember the last path that
was made absolute and reuse it while the path stays the same. Do the
same in the other places that go through every line of a diff. A query
over that diff now takes about 27 milliseconds instead of 63.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
With no diff renderer configured, opening the jump-to-file menu for the
diff of a commit that adds or deletes a file of 100,000 lines takes
more than 20 seconds, and so does picking a file from it. In such a
diff, moving the selection by change block takes as long for each key
press. All this time the UI is frozen.
To find out which line of which file each row of the main view shows,
lazygit parses the view's content as a diff. For every line of a file's
diff it asks the parsed patch for the line's number in the new and in
the old file, and each of these calls counts the lines of the hunk
before it. So parsing takes time quadratic in the length of a hunk, and
the diff of a new or deleted file is a single hunk. For a diff of
200,000 lines, one parse took about 10 seconds, and opening the menu
parses it twice. A diff renderer that states which line each row shows,
such as delta, doesn't go through this parse.
Number all lines of the patch in one pass instead. Parsing that diff
now takes about 40 milliseconds.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
With gui.scrollPastBottom set to false, picking the last file of a long
diff from the jump-to-file menu of the commits panel scrolls that file
to the top of the view. This leaves blank space below the end of the
diff.
A jump in a pane that isn't focused puts the file at the top of the view
and leaves it to the layout to stop at the end of the diff. But the
layout doesn't do this while the view is loading. Picking an item from
the menu closes the menu first, and the commits panel starts a re-render
of the diff as it gets the focus back. So the view is loading when the
jump happens, and the layout corrects the position only in a later pass
after the re-render has finished. For a long diff the re-render never
finishes; a later commit fixes this. Clicking a file in the diffstat
doesn't close a menu, so it doesn't have the problem.
Stop the jump at the last screenful of the diff, as a jump in the
focused pane does. Like that one, it stops there whatever
gui.scrollPastBottom is set to.
The diff in click_a_file_in_a_diff_stat_that_comes_first fits on
screen, so the jump doesn't scroll it any more. Make it longer than the
view.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A jump in a pane that isn't focused is going to stop at the last
screenful of the diff as well.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
If you press `e` on a file of a commit, and a later commit deleted that
file, the editor is opened on a path that doesn't exist. Most editors
then create it as a new, empty file. This is confusing. The same
happens with `o`, and with any other file that the worktree it is
opened from doesn't have. An example is a file that is added in a branch
that isn't checked out anywhere, since it is opened from the current
worktree.
Show an error instead of opening the editor. For a range selection in
the commit files panel, show it only if none of the selected files
exist. Otherwise open the existing ones and leave out the others
silently; an error shown only after returning from the editor would
come too late to be useful.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
If the commit files panel was entered from a branch that another
worktree has checked out, "Copy absolute path" in its copy menu gives
the file's path in the current worktree. Make it give the path in the
worktree that has the branch checked out. This is the file that `e` and
`o` open, and the one users most likely want the path of.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Do the same for `o` in the commit files panel as the previous commits
do for `e`. If the panel was entered from a branch that another worktree
has checked out, open the file from that worktree.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
If you enter a branch in the branches panel and press `e` on a line of
a commit's diff, or on a file in the commit files panel entered from
there, lazygit opens the file in the current worktree. If another
worktree has the branch checked out, this is the wrong copy of the
file. The current worktree may have it in a different state, or not
have it at all. Clicking a lazygit-edit:// hyperlink of a diff renderer
in such a diff has the same problem.
Open the file from the worktree that has the branch checked out
instead, and carry the line number forward to the file as that worktree
has it.
If no other worktree has the branch checked out, the file is still
opened from the current worktree.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Three places open a file of a diff in the editor: `e` and alt-click in
the main view, the lazygit-edit:// hyperlinks of a diff renderer, and
`e` in the commit files panel. The first two also each carry a line of
the diff forward to the file's current line before opening it.
Give them one pair of methods to call. The next commit changes where
these files are opened from, and can then do so in one place.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Going to the next or previous file of a diff, or picking one from the
jump-to-file menu or the diffstat, brings that file to the top of the
view. The user goes there to read the file from its start, so scroll the
view back to the left edge as well. Jumps between the hunks of a diff
keep the horizontal scroll position, as moving the selection does.
Nothing scrolls the main view horizontally yet, so this changes nothing
on its own. It prepares for scrolling the focused main view sideways
with H and L.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Two places that position the main view after a re-render of the same
diff call SetOrigin(0, y), although they only mean to move the view
vertically. One is the restore after a change of the context size, of
whitespace handling or of the diff renderer. The other is the clamp for
content that ends above the scroll position, for example after staging a
large part of the diff. Use SetOriginY in both, so that they keep the
horizontal scroll position.
Nothing scrolls the main view horizontally yet, so this changes nothing
on its own. It prepares for scrolling the focused main view sideways
with H and L.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
If diff.mnemonicPrefix is set, pressing space on a line in the focused
main view does nothing. The command log shows "Apply patch", but the
line is not staged. Other commands that read a path out of the working
tree's diff go wrong as well, such as jumping to a file. Building a
custom patch from a commit's diff still works, because git uses
mnemonic prefixes only when one side of the diff is the index or the
working tree.
With this config, the paths in the working tree's diff start with i/
and w/ instead of a/ and b/. We only strip a/ and b/, so the path we
read out of the diff header is not a file of the files panel, and we
skip the line without a message.
Users who set the config want to see these prefixes, so keep them.
Strip the first component of the path instead, whatever it is. `git
apply` does the same by default, and ParseableDiffPrefixes makes sure
there is such a component.
A section without +++ and --- lines needs more than that, because we
find the new path on its "diff --git" line by searching for " b/".
Take the path from the "rename to" or "copy to" line instead where
there is one. Otherwise the two paths on the "diff --git" line are the
same. Split the line where the two halves match after stripping their
prefixes, like `git apply` does.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The "rename to" and "copy to" lines of a diff header spell a path the
same way as the other header lines, but without a prefix. The next
commit reads paths from these lines too.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The rule below the header of a branch's pull request is drawn as wide as
the main view. Its width is read when the render is asked for, before
the layout has settled it. If the layout then changes the width of the
main view, for example because it unsplits the view for the content
that comes next, the rule comes out as wide as the view used to be.
Make a prefix a function that is called with the width the render is
laid out to, once the layout has run. The function it returns produces
the text on the render's own goroutine before the command starts. This
way a prefix that takes a while to produce, such as one that runs
commands of its own, holds up only the render and not the UI.
All prefixes are still static here; the next commit lays out the rule
of the pull request header to the width.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A diff opens with a diffstat naming every file in it, right above the
diff of each of them. Selecting a commit puts that list in front of you,
naming the same files the menu of the diff's files offers, and the menu
is still the only way to any of them.
Make each of those names a link that goes to where that file's diff
begins, as picking it from the menu does. The panel keeps the focus, so
a file of the commit being read is a click away and the selection stays
on the commit.
The names are found in the output as it is written to the pane, for next
to nothing. The diffstat is git's own text whichever renderer the diff
goes through — delta, diff-so-fancy and difftastic all pass it on
untouched — and it comes first, so the scan for it ends with it and
nothing below is looked at.
The link states the name as the diffstat does, and which file that names
is worked out on the click, against the files the diff turned out to
hold. That is the point at which a name the diffstat cut off behind
"..." or compacted to the "{old => new}" form of a rename can be
recognized at all.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
n and N step through the files of a multi-file diff one at a time, which
is a long way to the far end of a commit touching a hundred files.
Bind ctrl+g to a menu of the diff's files, in the order the diff shows
them and by the paths the repo knows them by; picking one goes to where
its diff begins, exactly where stepping to it with n would have left
you. The menu filters as you type, so the file you have in mind is a few
characters away however many the commit touches.
The key works in the panel the diff belongs to as well as in the diff
itself. A commit is read from the commits panel, so being able to jump
from there saves focusing the diff and leaving it again for the next
commit; the diff scrolls to the file and the focus stays in the panel.
It is ctrl+g rather than f because a key that works in every panel has
to be free in all of them, and f is fetch in the files panel and fixup
in the commits panel.
The command applies only while the main view is showing a diff, and is
left out of the keybindings menu where it isn't: over a branch's commit
log, or while a conflicted file has given the main section over to the
merge conflicts view.
The diff is read to the end before the menu is built, as searching it
does: a file below the part that has been read is in neither the list
nor the view. Each item names its file rather than the row that file
begins at, so that a diff re-rendered while the menu is up is jumped
into at the row the file begins at now.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Where a focus or a click puts the focused main view's selection is
worked out in the diff line helper; where a jump puts it is worked out
on the main view controller, though it is the same question about the
same pane. A jump asked for from anywhere else — from a panel below the
pane, or from a click on a link in the diff — has no way to reach that
answer.
Move it over. The controller keeps placeNavigationTarget as the short
way to say it for the jumps it makes itself.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
File navigation works out where the neighbouring file begins by walking
the rows itself, forwards or, more laboriously, backwards. A menu of the
diff's files needs the same rows, all of them at once.
Extract fileStarts, which answers that for the whole diff, and have
navigation pick its neighbour out of the answer. The two then agree on
where a file begins by construction, and the walk backwards over a file
goes away.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The identity of a row is reported in the repo's terms already: the pane
previewing the custom patch shows a diff of the two trees the patch was
materialized into, and the paths of those trees are mapped back to the
repo's files before anything sees them. Asking which file a row belongs
to, which file navigation does, was the one query that skipped that step
and answered with the tree's path.
Pull the mapping out of inRepoTerms so that it can be applied to a bare
path, and put filePaths through it. A menu listing the files of the diff
will want to show them by name; where a renderer states the path of each
side of a change, this also has both halves belong to one file rather
than to the two trees.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Two panels offer a branch's pull request today, and each looks it up in
the model's map itself and builds the same disabled reason from the same
string. The focused main view is about to offer a line of the diff in
that pull request, which would make three.
Put the lookup and the disabled reason on the host helper, beside the
pull request URL it already builds, and have both panels ask it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Hunk defaults and wrapping no longer belong to a staging panel. Rename both
public keys with automatic migration, and remove panel-era English strings so
config, UI, schema, and generated docs describe the surviving interface.
Co-Authored-By: GitHub Copilot <copilot@github.com>
Nothing routes to the explorer contexts after line actions and file entry
moved into the normal main pair. Delete their contexts, views, main-pair
wiring, discovery API, test drivers, and selection-state package so the
surviving diff view is the only implementation.
Their names go from the contexts a custom command may bind to as well, so
that a config still naming one is reported as the config error it now is
rather than taken as a context we simply failed to find.
Co-Authored-By: GitHub Copilot <copilot@github.com>
Focused main views now own selection, staging, patch construction, copying,
and context-size rerenders. Remove the parallel controller/helper stack and
its refresh scopes, while retaining custom-patch reset as mode behavior.
Co-Authored-By: GitHub Copilot <copilot@github.com>
The hint was raised on entering the staging panel, once, to explain that
the selection mode there had changed and how to get the old one back. That
panel is gone, and with it the moment the hint was tied to; what is left is
a string nothing prints and a flag nothing reads.
The advice it carried is not lost: the option it names is documented, and
the key that switches modes is on screen while a diff is focused.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Space in the pane previewing the patch had nothing to act on: everything
there is in the patch already, so it can only mean taking those lines back
out, in the way that space in the staged side of the working tree's diff
only unstages.
A line of the patch can't be found by its number: the patch renumbers
whatever follows a change it leaves out, so a line of it names a line of
the commit's diff that isn't the one shown. A line is identified instead
by its position among its file's changes, counted in the diff the patch is
shown as. That is the same position it has among the changes the patch
holds for the file, since both are in the order the file has them. This
holds however the rendering came out, so a renderer that groups a hunk's
deletions before its additions, or leaves a change out altogether, no
longer matters.
The pane's rows are stated in terms of the trees the patch was
materialized into, so the paths come back to the repo's own before
anything is looked up in them. This also lets the lines there be copied
and edited, as the lines of a commit's diff can be.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A patch built from what is on screen has to show what is in it, over the
diff those lines were taken from — which may be a diff renderer's
rendering of it, whose bytes are none of ours to touch.
So the marks are drawn in a gutter over the content, from the lines the
patch holds rather than from where they were drawn last. They are worked
out again whenever a pane's content settles and whenever the patch
itself changes. Working them out as the content settles keeps them right
across a renderer switch, a change of context size, or a walk through
the commits.
They are shown whenever the main view shows the diff the patch is built
from, whether or not it has the focus. The pane beside the diff previews
the patch all the while, and marks that came and went with the focus
would look like a bug while browsing. A diff of any other commit gets
none.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>