We move the code to push the branches context into CheckoutRef, this way it
works consistently no matter where we call it from. Previously, checking out
remote branches or tags would switch to the branches view, but checking out a
commit did not.
Note that it now also takes effect for undoing or redoing a checkout, which may
be a bit questionable; but I still think it makes sense for this, too.
This doesn't really solve a pressing problem, because I guess it's unlikely that
users add spaces at the beginning or end of what they type into a prompt; but it
could happen, and in this case we almost always want to strip it. Just adding
this here for completeness while I was working on this code.
The only exception is the input prompt of custom commands, because who knows
what users want to use that input for in their custom command.
Most of our prompts don't (shouldn't) allow empty input, but most callers didn't
check, and would run into cryptic errors when the user pressed enter at an empty
prompt (e.g. when creating a new branch). Now we simply don't allow hitting
enter in this case, and show an error toast instead.
This behavior is opt-out, because there are a few cases where empty input is
supported (e.g. creating a stash).
Previously it was used both for the Confirm handler and the Cancel handler, as
well as for the Confirm handler of confirmation popups (not prompts). There was
no other way to do it given how wrappedConfirmationFunction was shared between
all these; but now there is. The logic is really only needed for the Confirm
handler of prompts.
This doesn't fix anything, it just makes things clearer.
And call this new helper function from both wrappedConfirmationFunction and
wrappedPromptConfirmationFunction; this gives us more flexibility to do
different things in each of those.
When pressing '.' (next page) or ',' (previous page), the selection
now stays at the bottom or top of the viewport respectively, instead
of being centered which caused items to scroll off. If the selection is not
already on the last/first line of the view, '.'/',' moves it there without
scrolling.
This implements a special case for page navigation as suggested by
the maintainer in issue #5017, keeping the cursor position consistent
with user expectations for page-based navigation.
Fixes#5017
Co-authored-by: Stefan Haller <stefan@haller-berlin.de>
The existing diff parser incorrectly treated subsequent lines beginning
with "---" as filename headers while processing hunks. This caused
corruption when dashed lines appeared within diffs themselves.
Restrict filename detection to only occur between hunks.
This will put whatever git's default merge variant is as the first menu item,
and add a second item which is the opposite (no-ff if the default is ff, and
vice versa).
If users prefer to always have the same option first no matter whether it's
applicable, they can make ff always appear first by setting git's "merge.ff"
config to "true" or "only", or by setting lazygit's "git.merging.args" config to
"--ff" or "--ff-only"; if they want no-ff to appear first, they can do that by
setting git's "merge.ff" config to "false", or by setting lazygit's
"git.merging.args" config to "--no-ff". Which of these they choose depends on
whether they want the config to also apply to other git clients including the
cli, or only to lazygit.
- Squash and FastForwardOnly are mutually exclusive, and instead of asserting
this at runtime, model the API so that they can't be passed together.
- FastForwardOnly is unused, so remove it; however, we are going to need --ff
and --no-ff in the next commit, so add those instead.
- Instead of putting the enum into the MergeOpts struct, replace the struct by
the enum. We can reintroduce the struct when we add more arguments, but for
now it's an unnecessary indirection.
Stashing doesn't affect submodules, so if you have a working copy that has
out-of-date submodules but no other changes, and then you revert or paste a
commit (or invoke one of the many other lazygit commands that auto-stash, e.g.
undo), lazygit would previously try to stash changes (which did nothing, but
also didn't return an error), perform the operation, and then pop the stash
again. If no stashes existed before, then this would only cause a confusing
error popup ("error: refs/stash@{0} is not a valid reference"), but if there
were stashes, this would try to pop the newest one of these, which is very
undesirable and confusing.
Whenever git returns the error "The previous cherry-pick is now empty", we would
previously continue the rebase; this works for rebase because it behaves the
same as "git rebase --skip" in this case. That's not true for cherry-pick
though; if you continue a cherry-pick where the current commit is empty, it will
return the same error again, causing lazygit to be stuck in an endless loop.
Fix this by skipping instead of continuing; this shouldn't make a difference for
rebase, but works for cherry-pick.
Theoretically we could have a similar problem for revert (if you are trying to
revert a commit that has already been undone through some other means); this
should then be fixed in the same way with this change. However, the change is
not relevant for revert because git returns a different error in this case.
When focusing the main view, going into full screen mode by pressing '+' twice,
and then opening the search prompt ('/') or a menu (e.g. '?' or ':'), the full
screen display would switch to the focused side panel.
Fix this by always excluding popups from the window arrangement logic. No popup
should ever have any influence on how the views beneath it are laid out.
This is likely to do bad things; for example, if the prompt is the shell command
prompt, then we would run into what looks like a deadlock bug in tcell. In other
cases, the characters in the following lines might be treated as random commands
after the prompt is confirmed.
Doesn't make a difference currently, since the title is either StatusTitle when
the dashboard is showing, or LogTitle when one of the branch logs is showing.
This is going to change in the next commit, though.
Replace merge-tool with merge options menu that allows resolving all
conflicts for selected files as ours, theirs, or union, while still
providing access to the merge tool.
The root item's path is ".", and the path of a file at top level is "./file".
When using GetPath, this gives us "." and "file", respectively, and
isDescendentOfSelectedNodes would return false for these.
Working with the internal paths (i.e. without stripping the leading "./") fixes
this.
Previously, the feedback you got when pressing "-" was just a "Checking out..."
status in the bottom line. This was both easy to miss if you are used to looking
for an inline status in the branches panel, and it didn't provide information
about which branch was being checked out, which can be annoying in very large
repos where checking out takes a while, and you only see at the end if you are
now on the right branch.
Improve this by trying to figure out which branch was the previously checked out
one, and then checking it out normally so that you get an inline status next to
it (as if you had pressed space on it). There are cases where this fails, e.g.
when the previously checked out ref was a detached head, in which case we fall
back to the previous behavior.
In all other menus besides the keybindings menu it makes sense to hide
keybindings that match the confirmMenu binding. This is important to make it
clear which action will be triggered when you press the key.
In the keybindings menu this is different; the main purpose of that menu is not
to allow triggering commands by their key while the menu is open, but to serve
as a reference for what the keybindings are when it is not open. Because of
this, it is more important to show all bindings in this menu, even if they
conflict with the confirmMenu key.
This fixes a regression introduced in b3a3410a1a.
It seems useful to have the flexibility to remap "enter" in confirmations to
"y", but keep "enter" for menus and suggestions (even though we sometimes use
menus as confirmations, but it's still good to give users the choice).
The universal.confirm keybinding is the wrong one to use for this, we want
universal.goInto instead. They are both bound to "enter" by default, but when
remapping confirm to "y" we don't want to use that for entering worktrees.
Rebinding the universal.confirm keybinding currently doesn't make sense, because
the rebound key would also be used for editable prompts, which means you would
only be able to bind it to a ctrl key (not "y", which is desirable for some
people), and also it would allow you to enter a line feed in a branch name.
Fix this by always using enter for editable prompts.
So far, confirmations and prompts were handled by the same view, context, and
controller, with a bunch of conditional code based on whether the view is
editable. This was more or less ok so far, since it does save a little bit of
code duplication; however, now we need separate views, because we don't have
dynamic keybindings, but we want to map "confirm" to different keys in
confirmations (the "universal.confirm" user config) and prompts (hard-coded to
enter, because it doesn't make sense to customize it there).
It also allows us to get rid of the conditional code, which is a nice benefit;
and the code duplication is actually not *that* bad.
To fix the problem described in the previous commit, iterate backwards over the
stashes that we want to delete. This allows us to use their Index field.
In some cases we set a disabled reason but leave the text empty, so that we
don't get an error toast when the item is invoked. In such a case it looks
awkward if there is a tooltip showing "Disabled: " with no following text.
For many menus, just "Close" is fine, but some menus act more like confirmations
(e.g. the menu that appears when you cherry-pick and get conflicts); in this
case, it's good to make it more obvious that hitting esc cancels the whole
thing.
Dismissing a range selection is handled by the global escape handler for all
list views, but not for the staging and patch building views, so we need to make
the esc description dynamic for these, too.
The main reason for this is that sometimes the escape key is handled by a local
binding, in which case it appears before the '?' binding in the options status
bar, and other times it is handled by the global controller, in which case it
appeared after. Moving it to before the keybindings menu handler makes it appear
before '?' in both cases.
Also, if the window is too narrow to show all keybindings, the ones that don't
fit will be truncated, and in this case it is more important to show the esc
binding because of its context sensitivity.
This also moves the esc entry up a few positions in the keybindings menu, but I
don't think this matters much.
