wip

autopipeline.go

@@ -5,6 +5,8 @@ import (
 	"sync"
 	"sync/atomic"
 	"time"
+
+	"github.com/redis/go-redis/v9/internal"
 )
 
 // AutoPipelineConfig configures the autopipelining behavior.
@@ -13,30 +15,11 @@ type AutoPipelineConfig struct {
 	// Default: 100
 	MaxBatchSize int
 
-	// FlushInterval is the maximum time to wait before flushing pending commands.
-	// Default: 10ms
-	FlushInterval time.Duration
-
 	// MaxConcurrentBatches is the maximum number of concurrent pipeline executions.
 	// This prevents overwhelming the server with too many concurrent pipelines.
 	// Default: 10
 	MaxConcurrentBatches int
 
-	// UseRingBuffer enables the high-performance ring buffer queue.
-	// When enabled, uses a pre-allocated ring buffer with lock-free enqueue
-	// instead of the slice-based queue. This provides:
-	// - 6x faster enqueue operations
-	// - 100% reduction in allocations during enqueue
-	// - Better performance under high concurrency
-	// Default: true (enabled)
-	UseRingBuffer bool
-
-	// RingBufferSize is the size of the ring buffer queue.
-	// Only used when UseRingBuffer is true.
-	// Must be a power of 2 for optimal performance (will be rounded up if not).
-	// Default: 1024
-	RingBufferSize int
-
 	// MaxFlushDelay is the maximum delay after flushing before checking for more commands.
 	// A small delay (e.g., 100μs) can significantly reduce CPU usage by allowing
 	// more commands to batch together, at the cost of slightly higher latency.
@@ -56,19 +39,16 @@ type AutoPipelineConfig struct {
 func DefaultAutoPipelineConfig() *AutoPipelineConfig {
 	return &AutoPipelineConfig{
 		MaxBatchSize:         50,
-		FlushInterval:        time.Millisecond,
 		MaxConcurrentBatches: 10,
-		UseRingBuffer:        true, // Enable ring buffer by default
-		RingBufferSize:       1024,
 		MaxFlushDelay:        0, // No delay by default (lowest latency)
 	}
 }
 
-// pipelinerClient is an interface for clients that support pipelining.
+// cmdableClient is an interface for clients that support pipelining.
 // Both Client and ClusterClient implement this interface.
-type pipelinerClient interface {
+type cmdableClient interface {
+	Cmdable
 	Process(ctx context.Context, cmd Cmder) error
-	Pipeline() Pipeliner
 }
 
 // queuedCmd wraps a command with a done channel for completion notification
@@ -77,6 +57,91 @@ type queuedCmd struct {
 	done chan struct{}
 }
 
+// doneChanPool is a sync.Pool for done channels to reduce allocations
+// We use buffered channels so we can signal completion without blocking
+var doneChanPool = sync.Pool{
+	New: func() interface{} {
+		return make(chan struct{}, 1)
+	},
+}
+
+// getDoneChan gets a done channel from the pool
+func getDoneChan() chan struct{} {
+	ch := doneChanPool.Get().(chan struct{})
+	// Make sure the channel is empty
+	select {
+	case <-ch:
+	default:
+	}
+	return ch
+}
+
+// putDoneChan returns a done channel to the pool after draining it
+func putDoneChan(ch chan struct{}) {
+	// Drain the channel completely
+	for {
+		select {
+		case <-ch:
+		default:
+			doneChanPool.Put(ch)
+			return
+		}
+	}
+}
+
+// queuedCmdPool is a sync.Pool for queuedCmd to reduce allocations
+var queuedCmdPool = sync.Pool{
+	New: func() interface{} {
+		return &queuedCmd{}
+	},
+}
+
+// getQueuedCmd gets a queuedCmd from the pool and initializes it
+func getQueuedCmd(cmd Cmder) *queuedCmd {
+	qc := queuedCmdPool.Get().(*queuedCmd)
+	qc.cmd = cmd
+	qc.done = getDoneChan()
+	return qc
+}
+
+// putQueuedCmd returns a queuedCmd to the pool after clearing it
+func putQueuedCmd(qc *queuedCmd) {
+	qc.cmd = nil
+	if qc.done != nil {
+		putDoneChan(qc.done)
+		qc.done = nil
+	}
+	queuedCmdPool.Put(qc)
+}
+
+// queueSlicePool is a sync.Pool for queue slices to reduce allocations
+var queueSlicePool = sync.Pool{
+	New: func() interface{} {
+		// Create a slice with capacity for typical batch size
+		return make([]*queuedCmd, 0, 100)
+	},
+}
+
+// getQueueSlice gets a queue slice from the pool
+func getQueueSlice(capacity int) []*queuedCmd {
+	slice := queueSlicePool.Get().([]*queuedCmd)
+	// Clear the slice but keep capacity
+	slice = slice[:0]
+	// If the capacity is too small, allocate a new one
+	if cap(slice) < capacity {
+		return make([]*queuedCmd, 0, capacity)
+	}
+	return slice
+}
+
+// putQueueSlice returns a queue slice to the pool
+func putQueueSlice(slice []*queuedCmd) {
+	// Only pool slices that aren't too large (avoid memory bloat)
+	if cap(slice) <= 1000 {
+		queueSlicePool.Put(slice)
+	}
+}
+
 // autoPipelineCmd wraps a command and blocks on result access until execution completes.
 type autoPipelineCmd struct {
 	Cmder
@@ -100,7 +165,6 @@ func (c *autoPipelineCmd) String() string {
 // 1. Collecting commands from multiple goroutines into a shared queue
 // 2. Automatically flushing the queue when:
 //   - The batch size reaches MaxBatchSize
-//   - The flush interval (FlushInterval) expires
 //
 // 3. Executing batched commands using Redis pipelining
 //
@@ -116,56 +180,59 @@ func (c *autoPipelineCmd) String() string {
 type AutoPipeliner struct {
 	cmdable // Embed cmdable to get all Redis command methods
 
-	pipeliner pipelinerClient
+	pipeliner cmdableClient
 	config    *AutoPipelineConfig
 
 	// Command queue - either slice-based or ring buffer
 	mu       sync.Mutex
 	queue    []*queuedCmd // Slice-based queue (legacy)
-	ring     *autoPipelineRing // Ring buffer queue (high-performance)
 	queueLen atomic.Int32 // Fast path check without lock
 
 	// Flush control
 	flushCh chan struct{} // Signal to flush immediately
 
 	// Concurrency control
-	sem chan struct{} // Semaphore for concurrent batch limit
+	sem *internal.FastSemaphore // Semaphore for concurrent batch limit
 
 	// Lifecycle
 	ctx    context.Context
 	cancel context.CancelFunc
 	wg     sync.WaitGroup
 	closed atomic.Bool
-	cachedFlushInterval atomic.Int64
 }
 
 // NewAutoPipeliner creates a new autopipeliner for the given client.
 // The client can be either *Client or *ClusterClient.
-func NewAutoPipeliner(pipeliner pipelinerClient, config *AutoPipelineConfig) *AutoPipeliner {
+func NewAutoPipeliner(pipeliner cmdableClient, config *AutoPipelineConfig) *AutoPipeliner {
 	if config == nil {
 		config = DefaultAutoPipelineConfig()
 	}
 
+	// Apply defaults for zero values
+	if config.MaxBatchSize <= 0 {
+		config.MaxBatchSize = 50
+	}
+
+	if config.MaxConcurrentBatches <= 0 {
+		config.MaxConcurrentBatches = 10
+	}
+
 	ctx, cancel := context.WithCancel(context.Background())
 
 	ap := &AutoPipeliner{
 		pipeliner: pipeliner,
 		config:    config,
 		flushCh:   make(chan struct{}, 1),
-		sem:       make(chan struct{}, config.MaxConcurrentBatches),
+		sem:       internal.NewFastSemaphore(int32(config.MaxConcurrentBatches)),
 		ctx:       ctx,
 		cancel:    cancel,
 	}
 
-	// Initialize cmdable to route all commands through Process
-	ap.cmdable = ap.Process
+	// Initialize cmdable to route all commands through processAndBlock
+	ap.cmdable = ap.processAndBlock
 
 	// Initialize queue based on configuration
-	if config.UseRingBuffer {
-		ap.ring = newAutoPipelineRing(config.RingBufferSize)
-	} else {
-		ap.queue = make([]*queuedCmd, 0, config.MaxBatchSize)
-	}
+	ap.queue = getQueueSlice(config.MaxBatchSize)
 
 	// Start background flusher
 	ap.wg.Add(1)
@@ -223,28 +290,41 @@ func (ap *AutoPipeliner) Process(ctx context.Context, cmd Cmder) error {
 	return nil
 }
 
+// processAndBlock is used by the cmdable interface.
+// It queues the command and blocks until execution completes.
+// This allows typed methods like Get(), Set(), etc. to work correctly with autopipelining.
+func (ap *AutoPipeliner) processAndBlock(ctx context.Context, cmd Cmder) error {
+	// Check if this is a blocking command (has read timeout set)
+	// Blocking commands like BLPOP, BRPOP, BZMPOP should not be autopipelined
+	if cmd.readTimeout() != nil {
+		// Execute blocking commands directly without autopipelining
+		return ap.pipeliner.Process(ctx, cmd)
+	}
+
+	done := ap.process(ctx, cmd)
+
+	// Block until the command is executed
+	<-done
+
+	return cmd.Err()
+}
+
+// closedChan is a reusable closed channel for error cases
+var closedChan = func() chan struct{} {
+	ch := make(chan struct{})
+	close(ch)
+	return ch
+}()
+
 // process is the internal method that queues a command and returns its done channel.
 func (ap *AutoPipeliner) process(ctx context.Context, cmd Cmder) <-chan struct{} {
 	if ap.closed.Load() {
 		cmd.SetErr(ErrClosed)
-		closedCh := make(chan struct{})
-		close(closedCh)
-		return closedCh
+		return closedChan
 	}
 
-	// Use ring buffer if enabled
-	if ap.config.UseRingBuffer {
-		done := ap.ring.putOne(cmd)
-		// putOne will signal the flusher via condition variable if needed
-		return done
-	}
-
-	// Legacy slice-based queue
-	// Create queued command with done channel
-	qc := &queuedCmd{
-		cmd:  cmd,
-		done: make(chan struct{}),
-	}
+	// Get queued command from pool
+	qc := getQueuedCmd(cmd)
 
 	// Fast path: try to acquire lock without blocking
 	if ap.mu.TryLock() {
@@ -268,12 +348,11 @@ func (ap *AutoPipeliner) process(ctx context.Context, cmd Cmder) <-chan struct{}
 	ap.queueLen.Store(int32(queueLen))
 	ap.mu.Unlock()
 
-	// Always signal the flusher (non-blocking)
+	// always signal the flusher (non-blocking)
 	select {
 	case ap.flushCh <- struct{}{}:
 	default:
 	}
-
 	return qc.done
 }
 
@@ -308,11 +387,6 @@ func (ap *AutoPipeliner) Close() error {
 	// Cancel context to stop flusher
 	ap.cancel()
 
-	// Wake up flusher if it's waiting
-	if ap.config.UseRingBuffer {
-		ap.ring.wakeAll()
-	}
-
 	// Wait for flusher to finish
 	ap.wg.Wait()
 
@@ -322,106 +396,8 @@ func (ap *AutoPipeliner) Close() error {
 // flusher is the background goroutine that flushes batches.
 func (ap *AutoPipeliner) flusher() {
 	defer ap.wg.Done()
-
-	if !ap.config.UseRingBuffer {
-		// Legacy slice-based flusher
 	ap.flusherSlice()
 	return
-	}
-
-	// Ring buffer flusher
-	var (
-		cmds      = make([]Cmder, 0, ap.config.MaxBatchSize)
-		doneChans = make([]chan struct{}, 0, ap.config.MaxBatchSize)
-	)
-
-	for {
-		// Try to get next command (non-blocking)
-		cmd, done := ap.ring.nextWriteCmd()
-
-		if cmd == nil {
-			// No command available
-			// If we have buffered commands, execute them first
-			if len(cmds) > 0 {
-				ap.executeBatch(cmds, doneChans)
-				cmds = cmds[:0]
-				doneChans = doneChans[:0]
-			}
-
-			// Check for shutdown before blocking
-			select {
-			case <-ap.ctx.Done():
-				return
-			default:
-			}
-
-			// Wait for next command (blocking)
-			// This will be woken up by wakeAll() during shutdown
-			cmd, done = ap.ring.waitForWrite()
-
-			// If nil, ring is closed
-			if cmd == nil {
-				return
-			}
-		}
-
-		// Add command to batch
-		cmds = append(cmds, cmd)
-		doneChans = append(doneChans, done)
-
-		// Execute batch if full
-		if len(cmds) >= ap.config.MaxBatchSize {
-			ap.executeBatch(cmds, doneChans)
-			cmds = cmds[:0]
-			doneChans = doneChans[:0]
-		}
-	}
-}
-
-// executeBatch executes a batch of commands.
-func (ap *AutoPipeliner) executeBatch(cmds []Cmder, doneChans []chan struct{}) {
-	if len(cmds) == 0 {
-		return
-	}
-
-	// Acquire semaphore (limit concurrent batches)
-	select {
-	case ap.sem <- struct{}{}:
-		defer func() {
-			<-ap.sem
-		}()
-	case <-ap.ctx.Done():
-		// Context cancelled, set error on all commands and notify
-		for i, cmd := range cmds {
-			cmd.SetErr(ErrClosed)
-			doneChans[i] <- struct{}{} // Send signal instead of close
-			ap.ring.finishCmd()
-		}
-		return
-	}
-
-	// Fast path for single command
-	if len(cmds) == 1 {
-		_ = ap.pipeliner.Process(context.Background(), cmds[0])
-		doneChans[0] <- struct{}{} // Send signal instead of close
-		ap.ring.finishCmd()
-		return
-	}
-
-	// Execute pipeline for multiple commands
-	pipe := ap.pipeliner.Pipeline()
-	for _, cmd := range cmds {
-		_ = pipe.Process(context.Background(), cmd)
-	}
-
-	// Execute and wait for completion
-	_, _ = pipe.Exec(context.Background())
-
-	// Notify completion and finish slots
-	for _, done := range doneChans {
-		done <- struct{}{} // Send signal instead of close
-		ap.ring.finishCmd()
-	}
 }
 
 // flusherSlice is the legacy slice-based flusher.
@@ -441,6 +417,9 @@ func (ap *AutoPipeliner) flusherSlice() {
 		for {
 			select {
 			case <-ap.flushCh:
+				if ap.Len() >= ap.config.MaxBatchSize {
+					goto drained
+				}
 			default:
 				goto drained
 			}
@@ -465,8 +444,6 @@ func (ap *AutoPipeliner) flusherSlice() {
 	}
 }
 
-
-
 // flushBatchSlice flushes commands from the slice-based queue (legacy).
 func (ap *AutoPipeliner) flushBatchSlice() {
 	// Get commands from queue
@@ -479,33 +456,43 @@ func (ap *AutoPipeliner) flushBatchSlice() {
 
 	// Take ownership of current queue
 	queuedCmds := ap.queue
-	ap.queue = make([]*queuedCmd, 0, ap.config.MaxBatchSize)
+	ap.queue = getQueueSlice(ap.config.MaxBatchSize)
 	ap.queueLen.Store(0)
 	ap.mu.Unlock()
 
 	// Acquire semaphore (limit concurrent batches)
-	select {
-	case ap.sem <- struct{}{}:
-		defer func() {
-			<-ap.sem
-		}()
-	case <-ap.ctx.Done():
+	// Try fast path first
+	if !ap.sem.TryAcquire() {
+		// Fast path failed, need to wait
+		// essentially, this is a blocking call
+		err := ap.sem.Acquire(ap.ctx, 5*time.Second, context.DeadlineExceeded)
+		if err != nil {
 			// Context cancelled, set error on all commands and notify
 			for _, qc := range queuedCmds {
 				qc.cmd.SetErr(ErrClosed)
-			close(qc.done)
+				// Signal completion by sending to buffered channel
+				qc.done <- struct{}{}
+				putQueuedCmd(qc)
 			}
+			putQueueSlice(queuedCmds)
 			return
 		}
+	}
 
 	if len(queuedCmds) == 0 {
+		ap.sem.Release()
 		return
 	}
 
 	// Fast path for single command
 	if len(queuedCmds) == 1 {
-		_ = ap.pipeliner.Process(context.Background(), queuedCmds[0].cmd)
-		close(queuedCmds[0].done)
+		qc := queuedCmds[0]
+		_ = ap.pipeliner.Process(context.Background(), qc.cmd)
+		// Signal completion by sending to buffered channel
+		qc.done <- struct{}{}
+		ap.sem.Release()
+		putQueuedCmd(qc)
+		putQueueSlice(queuedCmds)
 		return
 	}
 
@@ -521,15 +508,16 @@ func (ap *AutoPipeliner) flushBatchSlice() {
 	// IMPORTANT: Only notify after pipeline execution is complete
 	// This ensures command results are fully populated before waiters proceed
 	for _, qc := range queuedCmds {
-		close(qc.done)
+		// Signal completion by sending to buffered channel
+		qc.done <- struct{}{}
+		putQueuedCmd(qc)
 	}
+	ap.sem.Release()
+	putQueueSlice(queuedCmds)
 }
 
 // Len returns the current number of queued commands.
 func (ap *AutoPipeliner) Len() int {
-	if ap.config.UseRingBuffer {
-		return ap.ring.len()
-	}
 	return int(ap.queueLen.Load())
 }
 
@@ -559,17 +547,7 @@ func (ap *AutoPipeliner) Pipelined(ctx context.Context, fn func(Pipeliner) error
 // Note: This uses the underlying client's TxPipeline if available (Client, Ring, ClusterClient).
 // For other clients, this will panic.
 func (ap *AutoPipeliner) TxPipelined(ctx context.Context, fn func(Pipeliner) error) ([]Cmder, error) {
-	// Try to get TxPipeline from the underlying client
-	// This works for Client, Ring, and ClusterClient
-	type txPipeliner interface {
-		TxPipeline() Pipeliner
-	}
-
-	if txp, ok := ap.pipeliner.(txPipeliner); ok {
-		return txp.TxPipeline().Pipelined(ctx, fn)
-	}
-
-	panic("redis: TxPipelined not supported by this client type")
+	return ap.pipeliner.TxPipeline().Pipelined(ctx, fn)
 }
 
 // TxPipeline returns a new transaction pipeline that uses the underlying pipeliner.
@@ -578,15 +556,8 @@ func (ap *AutoPipeliner) TxPipelined(ctx context.Context, fn func(Pipeliner) err
 // Note: This uses the underlying client's TxPipeline if available (Client, Ring, ClusterClient).
 // For other clients, this will panic.
 func (ap *AutoPipeliner) TxPipeline() Pipeliner {
-	// Try to get TxPipeline from the underlying client
-	// This works for Client, Ring, and ClusterClient
-	type txPipeliner interface {
-		TxPipeline() Pipeliner
-	}
-
-	if txp, ok := ap.pipeliner.(txPipeliner); ok {
-		return txp.TxPipeline()
-	}
-
-	panic("redis: TxPipeline not supported by this client type")
+	return ap.pipeliner.TxPipeline()
 }
+
+// validate AutoPipeliner implements Cmdable
+var _ Cmdable = (*AutoPipeliner)(nil)

autopipeline_bench_test.go

@@ -69,7 +69,7 @@ func BenchmarkAutoPipeline(b *testing.B) {
 		Addr: ":6379",
 		AutoPipelineConfig: &redis.AutoPipelineConfig{
 			MaxBatchSize:         100,
-			FlushInterval:        10 * time.Millisecond,
+			MaxFlushDelay:        10 * time.Millisecond,
 			MaxConcurrentBatches: 10,
 		},
 	})
@@ -155,7 +155,7 @@ func BenchmarkConcurrentAutoPipeline(b *testing.B) {
 				Addr: ":6379",
 				AutoPipelineConfig: &redis.AutoPipelineConfig{
 					MaxBatchSize:         100,
-					FlushInterval:        10 * time.Millisecond,
+					MaxFlushDelay:        10 * time.Millisecond,
 					MaxConcurrentBatches: 10,
 				},
 			})
@@ -201,7 +201,7 @@ func BenchmarkAutoPipelineBatchSizes(b *testing.B) {
 				Addr: ":6379",
 				AutoPipelineConfig: &redis.AutoPipelineConfig{
 					MaxBatchSize:         batchSize,
-					FlushInterval:        10 * time.Millisecond,
+					MaxFlushDelay:        10 * time.Millisecond,
 					MaxConcurrentBatches: 10,
 				},
 			})
@@ -222,23 +222,23 @@ func BenchmarkAutoPipelineBatchSizes(b *testing.B) {
 	}
 }
 
-// BenchmarkAutoPipelineFlushIntervals tests different flush intervals
-func BenchmarkAutoPipelineFlushIntervals(b *testing.B) {
-	intervals := []time.Duration{
+// BenchmarkAutoPipelineMaxFlushDelays tests different max flush delays
+func BenchmarkAutoPipelineMaxFlushDelays(b *testing.B) {
+	delays := []time.Duration{
 		1 * time.Millisecond,
 		5 * time.Millisecond,
 		10 * time.Millisecond,
 		50 * time.Millisecond,
 	}
 
-	for _, interval := range intervals {
-		b.Run(fmt.Sprintf("interval=%s", interval), func(b *testing.B) {
+	for _, delay := range delays {
+		b.Run(fmt.Sprintf("delay=%s", delay), func(b *testing.B) {
 			ctx := context.Background()
 			client := redis.NewClient(&redis.Options{
 				Addr: ":6379",
 				AutoPipelineConfig: &redis.AutoPipelineConfig{
 					MaxBatchSize:         100,
-					FlushInterval:        interval,
+					MaxFlushDelay:        delay,
 					MaxConcurrentBatches: 10,
 				},
 			})
@@ -349,10 +349,8 @@ func BenchmarkRingBufferVsSliceQueue(b *testing.B) {
 			Addr: ":6379",
 			AutoPipelineConfig: &redis.AutoPipelineConfig{
 				MaxBatchSize:         50,
-				FlushInterval:        time.Millisecond,
+				MaxFlushDelay:        time.Millisecond,
 				MaxConcurrentBatches: 10,
-				UseRingBuffer:        true,
-				RingBufferSize:       1024,
 			},
 		})
 		defer client.Close()
@@ -378,9 +376,8 @@ func BenchmarkRingBufferVsSliceQueue(b *testing.B) {
 			Addr: ":6379",
 			AutoPipelineConfig: &redis.AutoPipelineConfig{
 				MaxBatchSize:         50,
-				FlushInterval:        time.Millisecond,
+				MaxFlushDelay:        time.Millisecond,
 				MaxConcurrentBatches: 10,
-				UseRingBuffer:        false, // Use legacy slice queue
 			},
 		})
 		defer client.Close()
@@ -417,11 +414,8 @@ func BenchmarkMaxFlushDelay(b *testing.B) {
 				Addr: ":6379",
 				AutoPipelineConfig: &redis.AutoPipelineConfig{
 					MaxBatchSize:         50,
-					FlushInterval:        time.Millisecond,
-					MaxConcurrentBatches: 10,
-					UseRingBuffer:        true,
-					RingBufferSize:       1024,
 					MaxFlushDelay:        delay,
+					MaxConcurrentBatches: 10,
 				},
 			})
 			defer client.Close()
@@ -462,10 +456,8 @@ func BenchmarkBufferSizes(b *testing.B) {
 				WriteBufferSize: size,
 				AutoPipelineConfig: &redis.AutoPipelineConfig{
 					MaxBatchSize:         50,
-					FlushInterval:        time.Millisecond,
+					MaxFlushDelay:        time.Millisecond,
 					MaxConcurrentBatches: 10,
-					UseRingBuffer:        true,
-					RingBufferSize:       1024,
 				},
 			})
 			defer client.Close()
@@ -487,27 +479,25 @@ func BenchmarkBufferSizes(b *testing.B) {
 	}
 }
 
-// BenchmarkRingBufferSizes benchmarks different ring buffer sizes
-func BenchmarkRingBufferSizes(b *testing.B) {
-	ringSizes := []int{
-		256,
-		512,
-		1024, // default
-		2048,
-		4096,
+// BenchmarkAutoPipelineMaxBatchSizes benchmarks different max batch sizes
+func BenchmarkAutoPipelineMaxBatchSizes(b *testing.B) {
+	batchSizes := []int{
+		10,
+		50,  // default
+		100,
+		200,
+		500,
 	}
 
-	for _, size := range ringSizes {
-		b.Run(fmt.Sprintf("ring_%d", size), func(b *testing.B) {
+	for _, size := range batchSizes {
+		b.Run(fmt.Sprintf("batch_%d", size), func(b *testing.B) {
 			ctx := context.Background()
 			client := redis.NewClient(&redis.Options{
 				Addr: ":6379",
 				AutoPipelineConfig: &redis.AutoPipelineConfig{
-					MaxBatchSize:         50,
-					FlushInterval:        time.Millisecond,
+					MaxBatchSize:         size,
+					MaxFlushDelay:        time.Millisecond,
 					MaxConcurrentBatches: 10,
-					UseRingBuffer:        true,
-					RingBufferSize:       size,
 				},
 			})
 			defer client.Close()

autopipeline_ring.go

@@ -1,236 +0,0 @@
-package redis
-
-import (
-	"math/bits"
-	"sync"
-	"sync/atomic"
-)
-
-// autoPipelineRing is a pre-allocated ring buffer queue for autopipelining.
-// It provides lock-free enqueue and FIFO ordering guarantees.
-//
-// Ring buffer architecture:
-// - Pre-allocated slots (no allocations during enqueue)
-// - Per-slot channels for request-response matching
-// - Atomic write pointer for lock-free enqueue
-// - Separate read pointers for write and read goroutines
-//
-// The ring buffer uses three pointers:
-// - write: Where app goroutines add commands (atomic increment)
-// - read1: Where flush goroutine reads commands to send
-// - read2: Where result goroutine matches responses (currently unused, for future optimization)
-type autoPipelineRing struct {
-	store     []autoPipelineSlot // Pre-allocated slots
-	mask      uint32             // Size - 1 (for fast modulo via bitwise AND)
-	write     uint32             // Write position (atomic, incremented by app goroutines)
-	read1     uint32             // Read position for flush goroutine
-	read2     uint32             // Read position for result matching (reserved for future use)
-	cmds      []Cmder            // Persistent buffer for collecting commands (reused, no allocations)
-	doneChans []chan struct{}    // Persistent buffer for collecting done channels (reused, no allocations)
-}
-
-// autoPipelineSlot represents a single command slot in the ring buffer.
-type autoPipelineSlot struct {
-	c1    *sync.Cond     // Condition variable for write synchronization (shared mutex with c2)
-	c2    *sync.Cond     // Condition variable for wait/signal (shared mutex with c1)
-	cmd   Cmder          // The command to execute
-	done  chan struct{}  // Completion notification channel (pre-allocated, reused)
-	mark  uint32         // State: 0=empty, 1=queued, 2=sent (atomic)
-	slept bool           // Whether writer goroutine is sleeping on this slot
-}
-
-// State constants for autoPipelineSlot.mark
-const (
-	apSlotEmpty  uint32 = 0 // Slot is empty and available
-	apSlotQueued uint32 = 1 // Command queued, ready to be sent
-	apSlotSent   uint32 = 2 // Command sent, waiting for response
-	apSlotClosed uint32 = 3 // Ring is closed, stop waiting
-)
-
-// newAutoPipelineRing creates a new ring buffer with the specified size.
-// Size will be rounded up to the next power of 2 for efficient modulo operations.
-func newAutoPipelineRing(size int) *autoPipelineRing {
-	// Round up to power of 2 for fast modulo via bitwise AND
-	if size <= 0 {
-		size = 1024 // Default size
-	}
-	if size&(size-1) != 0 {
-		// Not a power of 2, round up
-		size = 1 << (32 - bits.LeadingZeros32(uint32(size)))
-	}
-
-	r := &autoPipelineRing{
-		store:     make([]autoPipelineSlot, size),
-		mask:      uint32(size - 1),
-		cmds:      make([]Cmder, 0, size),         // Persistent buffer, reused
-		doneChans: make([]chan struct{}, 0, size), // Persistent buffer, reused
-	}
-
-	// Initialize each slot with condition variables and pre-allocated channel
-	for i := range r.store {
-		m := &sync.Mutex{}
-		r.store[i].c1 = sync.NewCond(m)
-		r.store[i].c2 = sync.NewCond(m) // Share the same mutex
-		r.store[i].done = make(chan struct{}, 1) // Buffered channel for signal (not close)
-	}
-
-	return r
-}
-
-// putOne enqueues a command into the ring buffer.
-// Returns the done channel that will be signaled when the command completes.
-//
-// Ring buffer enqueue implementation:
-// - Atomic increment for write position
-// - Wait on condition variable if slot is full
-// - Signal reader if it's sleeping
-func (r *autoPipelineRing) putOne(cmd Cmder) <-chan struct{} {
-	// Atomic increment to get next slot
-	slot := &r.store[atomic.AddUint32(&r.write, 1)&r.mask]
-
-	// Lock the slot
-	slot.c1.L.Lock()
-
-	// Wait if slot is not empty (mark != 0)
-	for slot.mark != 0 {
-		slot.c1.Wait()
-	}
-
-	// Store command and mark as queued
-	slot.cmd = cmd
-	slot.mark = 1
-	s := slot.slept
-
-	slot.c1.L.Unlock()
-
-	// If reader is sleeping, wake it up
-	if s {
-		slot.c2.Broadcast()
-	}
-
-	return slot.done
-}
-
-// nextWriteCmd tries to get the next command (non-blocking).
-// Returns nil if no command is available.
-// Should only be called by the flush goroutine.
-func (r *autoPipelineRing) nextWriteCmd() (Cmder, chan struct{}) {
-	r.read1++
-	p := r.read1 & r.mask
-	slot := &r.store[p]
-
-	slot.c1.L.Lock()
-	if slot.mark == 1 {
-		cmd := slot.cmd
-		done := slot.done
-		slot.mark = 2
-		slot.c1.L.Unlock()
-		return cmd, done
-	}
-	// No command available, rollback read position
-	r.read1--
-	slot.c1.L.Unlock()
-	return nil, nil
-}
-
-// waitForWrite waits for the next command (blocking).
-// Should only be called by the flush goroutine.
-// Returns nil if the ring is closed.
-func (r *autoPipelineRing) waitForWrite() (Cmder, chan struct{}) {
-	r.read1++
-	p := r.read1 & r.mask
-	slot := &r.store[p]
-
-	slot.c1.L.Lock()
-	// Wait until command is available (mark == 1) or closed (mark == 3)
-	for slot.mark != 1 && slot.mark != apSlotClosed {
-		slot.slept = true
-		slot.c2.Wait() // c1 and c2 share the same mutex
-		slot.slept = false
-	}
-
-	// Check if closed
-	if slot.mark == apSlotClosed {
-		r.read1-- // Rollback read position
-		slot.c1.L.Unlock()
-		return nil, nil
-	}
-
-	cmd := slot.cmd
-	done := slot.done
-	slot.mark = 2
-	slot.c1.L.Unlock()
-	return cmd, done
-}
-
-// finishCmd marks a command as completed and clears the slot.
-// Should only be called by the flush goroutine.
-func (r *autoPipelineRing) finishCmd() {
-	r.read2++
-	p := r.read2 & r.mask
-	slot := &r.store[p]
-
-	slot.c1.L.Lock()
-	if slot.mark == 2 {
-		// Drain the done channel before reusing
-		select {
-		case <-slot.done:
-		default:
-		}
-
-		// Clear slot for reuse
-		slot.cmd = nil
-		slot.mark = 0
-	}
-	slot.c1.L.Unlock()
-	slot.c1.Signal() // Wake up any writer waiting on this slot
-}
-
-// len returns the approximate number of queued commands.
-// This is an estimate and may not be exact due to concurrent access.
-func (r *autoPipelineRing) len() int {
-	write := atomic.LoadUint32(&r.write)
-	read := atomic.LoadUint32(&r.read1)
-	
-	// Handle wrap-around
-	if write >= read {
-		return int(write - read)
-	}
-	// Wrapped around
-	return int(write + (^uint32(0) - read) + 1)
-}
-
-// cap returns the capacity of the ring buffer.
-func (r *autoPipelineRing) cap() int {
-	return len(r.store)
-}
-
-// reset resets the ring buffer to empty state.
-// This should only be called when no goroutines are accessing the ring.
-func (r *autoPipelineRing) reset() {
-	atomic.StoreUint32(&r.write, 0)
-	atomic.StoreUint32(&r.read1, 0)
-	atomic.StoreUint32(&r.read2, 0)
-
-	for i := range r.store {
-		r.store[i].c1.L.Lock()
-		r.store[i].cmd = nil
-		r.store[i].mark = 0
-		r.store[i].slept = false
-		r.store[i].c1.L.Unlock()
-	}
-}
-
-// wakeAll wakes up all waiting goroutines.
-// This is used during shutdown to unblock the flusher.
-func (r *autoPipelineRing) wakeAll() {
-	for i := range r.store {
-		r.store[i].c1.L.Lock()
-		if r.store[i].mark == 0 {
-			r.store[i].mark = apSlotClosed
-		}
-		r.store[i].c1.L.Unlock()
-		r.store[i].c2.Broadcast()
-	}
-}
-

autopipeline_sequential_test.go

@@ -16,7 +16,7 @@ func TestAutoPipelineSequential(t *testing.T) {
 		Addr: ":6379",
 		AutoPipelineConfig: &redis.AutoPipelineConfig{
 			MaxBatchSize:         10,
-			FlushInterval:        50 * time.Millisecond,
+			MaxFlushDelay:        50 * time.Millisecond,
 			MaxConcurrentBatches: 5,
 		},
 	})
@@ -64,7 +64,7 @@ func TestAutoPipelineSequentialSmallBatches(t *testing.T) {
 		Addr: ":6379",
 		AutoPipelineConfig: &redis.AutoPipelineConfig{
 			MaxBatchSize:         1000, // Large batch size
-			FlushInterval:        20 * time.Millisecond, // Rely on timer
+			MaxFlushDelay:        20 * time.Millisecond, // Rely on timer
 			MaxConcurrentBatches: 5,
 		},
 	})
@@ -111,7 +111,7 @@ func TestAutoPipelineSequentialMixed(t *testing.T) {
 		Addr: ":6379",
 		AutoPipelineConfig: &redis.AutoPipelineConfig{
 			MaxBatchSize:         5,
-			FlushInterval:        50 * time.Millisecond,
+			MaxFlushDelay:        50 * time.Millisecond,
 			MaxConcurrentBatches: 5,
 		},
 	})

autopipeline_test.go

@@ -24,7 +24,7 @@ var _ = Describe("AutoPipeline", func() {
 			Addr: redisAddr,
 			AutoPipelineConfig: &redis.AutoPipelineConfig{
 				MaxBatchSize:         10,
-				FlushInterval:        50 * time.Millisecond,
+				MaxFlushDelay:        50 * time.Millisecond,
 				MaxConcurrentBatches: 5,
 			},
 		})
@@ -235,7 +235,7 @@ var _ = Describe("AutoPipeline", func() {
 			Addr: redisAddr,
 			AutoPipelineConfig: &redis.AutoPipelineConfig{
 				MaxBatchSize:         5,
-				FlushInterval:        10 * time.Millisecond,
+				MaxFlushDelay:        10 * time.Millisecond,
 				MaxConcurrentBatches: 2,
 			},
 		})
@@ -296,7 +296,7 @@ func TestAutoPipelineBasic(t *testing.T) {
 		Addr: ":6379",
 		AutoPipelineConfig: &redis.AutoPipelineConfig{
 			MaxBatchSize:         10,
-			FlushInterval:        50 * time.Millisecond,
+			MaxFlushDelay:        50 * time.Millisecond,
 			MaxConcurrentBatches: 5,
 		},
 	})
@@ -338,14 +338,14 @@ func TestAutoPipelineBasic(t *testing.T) {
 	}
 }
 
-func TestAutoPipelineFlushInterval(t *testing.T) {
+func TestAutoPipelineMaxFlushDelay(t *testing.T) {
 	ctx := context.Background()
 
 	client := redis.NewClient(&redis.Options{
 		Addr: ":6379",
 		AutoPipelineConfig: &redis.AutoPipelineConfig{
 			MaxBatchSize:         1000, // Large batch size so only timer triggers flush
-			FlushInterval:        50 * time.Millisecond,
+			MaxFlushDelay:        50 * time.Millisecond,
 			MaxConcurrentBatches: 5,
 		},
 	})

autopipeline_typed_test.go

@@ -0,0 +1,126 @@
+package redis_test
+
+import (
+	"context"
+	"testing"
+
+	"github.com/redis/go-redis/v9"
+)
+
+// TestAutoPipelineTypedCommands tests that typed commands like Get() and Set()
+// work correctly with autopipelining and block until execution.
+func TestAutoPipelineTypedCommands(t *testing.T) {
+	ctx := context.Background()
+	client := redis.NewClient(&redis.Options{
+		Addr: ":6379",
+	})
+	defer client.Close()
+
+	// Skip if Redis is not available
+	if err := client.Ping(ctx).Err(); err != nil {
+		t.Skipf("Redis not available: %v", err)
+	}
+
+	ap := client.AutoPipeline()
+	defer ap.Close()
+
+	// Test Set and Get
+	setResult, setErr := ap.Set(ctx, "test_key", "test_value", 0).Result()
+	if setErr != nil {
+		t.Fatalf("Set failed: %v", setErr)
+	}
+	if setResult != "OK" {
+		t.Errorf("Expected 'OK', got '%s'", setResult)
+	}
+
+	getResult, getErr := ap.Get(ctx, "test_key").Result()
+	if getErr != nil {
+		t.Fatalf("Get failed: %v", getErr)
+	}
+	if getResult != "test_value" {
+		t.Errorf("Expected 'test_value', got '%s'", getResult)
+	}
+
+	// Clean up
+	client.Del(ctx, "test_key")
+}
+
+// TestAutoPipelineTypedCommandsMultiple tests multiple typed commands
+func TestAutoPipelineTypedCommandsMultiple(t *testing.T) {
+	ctx := context.Background()
+	client := redis.NewClient(&redis.Options{
+		Addr: ":6379",
+	})
+	defer client.Close()
+
+	// Skip if Redis is not available
+	if err := client.Ping(ctx).Err(); err != nil {
+		t.Skipf("Redis not available: %v", err)
+	}
+
+	ap := client.AutoPipeline()
+	defer ap.Close()
+
+	// Queue multiple Set commands
+	ap.Set(ctx, "key1", "value1", 0)
+	ap.Set(ctx, "key2", "value2", 0)
+	ap.Set(ctx, "key3", "value3", 0)
+
+	// Get the values - should block until execution
+	val1, err1 := ap.Get(ctx, "key1").Result()
+	if err1 != nil {
+		t.Fatalf("Get key1 failed: %v", err1)
+	}
+	if val1 != "value1" {
+		t.Errorf("Expected 'value1', got '%s'", val1)
+	}
+
+	val2, err2 := ap.Get(ctx, "key2").Result()
+	if err2 != nil {
+		t.Fatalf("Get key2 failed: %v", err2)
+	}
+	if val2 != "value2" {
+		t.Errorf("Expected 'value2', got '%s'", val2)
+	}
+
+	val3, err3 := ap.Get(ctx, "key3").Result()
+	if err3 != nil {
+		t.Fatalf("Get key3 failed: %v", err3)
+	}
+	if val3 != "value3" {
+		t.Errorf("Expected 'value3', got '%s'", val3)
+	}
+
+	// Clean up
+	client.Del(ctx, "key1", "key2", "key3")
+}
+
+// TestAutoPipelineTypedCommandsVal tests the Val() method
+func TestAutoPipelineTypedCommandsVal(t *testing.T) {
+	ctx := context.Background()
+	client := redis.NewClient(&redis.Options{
+		Addr: ":6379",
+	})
+	defer client.Close()
+
+	// Skip if Redis is not available
+	if err := client.Ping(ctx).Err(); err != nil {
+		t.Skipf("Redis not available: %v", err)
+	}
+
+	ap := client.AutoPipeline()
+	defer ap.Close()
+
+	// Set a value
+	ap.Set(ctx, "test_val_key", "test_val_value", 0)
+
+	// Get using Val() - should block until execution
+	val := ap.Get(ctx, "test_val_key").Val()
+	if val != "test_val_value" {
+		t.Errorf("Expected 'test_val_value', got '%s'", val)
+	}
+
+	// Clean up
+	client.Del(ctx, "test_val_key")
+}
+

internal/pool/conn.go

@@ -18,43 +18,6 @@ import (
 
 var noDeadline = time.Time{}
 
-// Global time cache updated every 100ms by background goroutine.
-// This avoids expensive time.Now() syscalls in hot paths like getEffectiveReadTimeout.
-// Max staleness: 100ms, which is acceptable for timeout deadline checks (timeouts are typically 3-30 seconds).
-var globalTimeCache struct {
-	nowNs atomic.Int64
-}
-
-func init() {
-	// Initialize immediately
-	globalTimeCache.nowNs.Store(time.Now().UnixNano())
-
-	// Start background updater
-	go func() {
-		ticker := time.NewTicker(100 * time.Millisecond)
-		defer ticker.Stop()
-
-		for range ticker.C {
-			globalTimeCache.nowNs.Store(time.Now().UnixNano())
-		}
-	}()
-}
-
-// getCachedTimeNs returns the current time in nanoseconds from the global cache.
-// This is updated every 100ms by a background goroutine, avoiding expensive syscalls.
-// Max staleness: 100ms.
-func getCachedTimeNs() int64 {
-	return globalTimeCache.nowNs.Load()
-}
-
-// GetCachedTimeNs returns the current time in nanoseconds from the global cache.
-// This is updated every 100ms by a background goroutine, avoiding expensive syscalls.
-// Max staleness: 100ms.
-// Exported for use by other packages that need fast time access.
-func GetCachedTimeNs() int64 {
-	return getCachedTimeNs()
-}
-
 // Global time cache updated every 50ms by background goroutine.
 // This avoids expensive time.Now() syscalls in hot paths like getEffectiveReadTimeout.
 // Max staleness: 50ms, which is acceptable for timeout deadline checks (timeouts are typically 3-30 seconds).

internal/proto/writer_bench_test.go

@@ -0,0 +1,106 @@
+package proto
+
+import (
+	"bytes"
+	"testing"
+)
+
+// BenchmarkWriteArgs benchmarks writing command arguments
+func BenchmarkWriteArgs(b *testing.B) {
+	testCases := []struct {
+		name string
+		args []interface{}
+	}{
+		{
+			name: "simple_get",
+			args: []interface{}{"GET", "key"},
+		},
+		{
+			name: "simple_set",
+			args: []interface{}{"SET", "key", "value"},
+		},
+		{
+			name: "set_with_expiry",
+			args: []interface{}{"SET", "key", "value", "EX", 3600},
+		},
+		{
+			name: "zadd",
+			args: []interface{}{"ZADD", "myset", 1.0, "member1", 2.0, "member2", 3.0, "member3"},
+		},
+		{
+			name: "large_command",
+			args: make([]interface{}, 100),
+		},
+	}
+
+	// Initialize large command
+	for i := range testCases[len(testCases)-1].args {
+		testCases[len(testCases)-1].args[i] = "arg"
+	}
+
+	for _, tc := range testCases {
+		b.Run(tc.name, func(b *testing.B) {
+			buf := &bytes.Buffer{}
+			wr := NewWriter(buf)
+
+			b.ResetTimer()
+			b.ReportAllocs()
+
+			for i := 0; i < b.N; i++ {
+				buf.Reset()
+				if err := wr.WriteArgs(tc.args); err != nil {
+					b.Fatal(err)
+				}
+			}
+		})
+	}
+}
+
+// BenchmarkWriteArgsParallel benchmarks concurrent writes
+func BenchmarkWriteArgsParallel(b *testing.B) {
+	args := []interface{}{"SET", "key", "value", "EX", 3600}
+
+	b.ReportAllocs()
+	b.RunParallel(func(pb *testing.PB) {
+		buf := &bytes.Buffer{}
+		wr := NewWriter(buf)
+
+		for pb.Next() {
+			buf.Reset()
+			if err := wr.WriteArgs(args); err != nil {
+				b.Fatal(err)
+			}
+		}
+	})
+}
+
+// BenchmarkWriteCmds benchmarks writing multiple commands (pipeline)
+func BenchmarkWriteCmds(b *testing.B) {
+	sizes := []int{1, 10, 50, 100, 500}
+
+	for _, size := range sizes {
+		b.Run(string(rune('0'+size/10)), func(b *testing.B) {
+			// Create commands
+			cmds := make([][]interface{}, size)
+			for i := range cmds {
+				cmds[i] = []interface{}{"SET", "key", i}
+			}
+
+			buf := &bytes.Buffer{}
+			wr := NewWriter(buf)
+
+			b.ResetTimer()
+			b.ReportAllocs()
+
+			for i := 0; i < b.N; i++ {
+				buf.Reset()
+				for _, args := range cmds {
+					if err := wr.WriteArgs(args); err != nil {
+						b.Fatal(err)
+					}
+				}
+			}
+		})
+	}
+}
+

options.go

@@ -281,6 +281,9 @@ type Options struct {
 	// to reduce network round-trips and improve throughput.
 	// If nil, autopipelining is disabled.
 	AutoPipelineConfig *AutoPipelineConfig
+
+	// AutoPipelineEnabled enables automatic pipelining of commands.
+	AutoPipelineEnabled bool
 }
 
 func (opt *Options) init() {

osscluster.go

@@ -1020,6 +1020,7 @@ type ClusterClient struct {
 	nodes         *clusterNodes
 	state         *clusterStateHolder
 	cmdsInfoCache *cmdsInfoCache
+	autopipeliner *AutoPipeliner
 	cmdable
 	hooksMixin
 }
@@ -1051,6 +1052,14 @@ func NewClusterClient(opt *ClusterOptions) *ClusterClient {
 	return c
 }
 
+func (c *ClusterClient) WithAutoPipeline() AutoPipelinedClient {
+	if c.autopipeliner != nil && !c.autopipeliner.closed.Load() {
+		return c.autopipeliner
+	}
+	c.autopipeliner = c.AutoPipeline()
+	return c.autopipeliner
+}
+
 // Options returns read-only Options that were used to create the client.
 func (c *ClusterClient) Options() *ClusterOptions {
 	return c.opt

osscluster_autopipeline_test.go

@@ -17,7 +17,7 @@ func TestClusterAutoPipelineBasic(t *testing.T) {
 		Addrs: []string{":7000", ":7001", ":7002"},
 		AutoPipelineConfig: &redis.AutoPipelineConfig{
 			MaxBatchSize:         10,
-			FlushInterval:        50 * time.Millisecond,
+			MaxFlushDelay:        50 * time.Millisecond,
 			MaxConcurrentBatches: 5,
 		},
 	})
@@ -66,7 +66,7 @@ func TestClusterAutoPipelineConcurrency(t *testing.T) {
 		Addrs: []string{":7000", ":7001", ":7002"},
 		AutoPipelineConfig: &redis.AutoPipelineConfig{
 			MaxBatchSize:         50,
-			FlushInterval:        10 * time.Millisecond,
+			MaxFlushDelay:        10 * time.Millisecond,
 			MaxConcurrentBatches: 10,
 		},
 	})
@@ -121,7 +121,7 @@ func TestClusterAutoPipelineCrossSlot(t *testing.T) {
 		Addrs: []string{":7000", ":7001", ":7002"},
 		AutoPipelineConfig: &redis.AutoPipelineConfig{
 			MaxBatchSize:         20,
-			FlushInterval:        10 * time.Millisecond,
+			MaxFlushDelay:        10 * time.Millisecond,
 			MaxConcurrentBatches: 5,
 		},
 	})

redis.go

@@ -208,6 +208,12 @@ func (hs *hooksMixin) processTxPipelineHook(ctx context.Context, cmds []Cmder) e
 	return hs.current.txPipeline(ctx, cmds)
 }
 
+// ------------------------------------------------------------------------------
+type AutoPipelinedClient interface {
+	Cmdable
+	Close() error
+}
+
 //------------------------------------------------------------------------------
 
 type baseClient struct {
@@ -1007,6 +1013,7 @@ func (c *baseClient) txPipelineReadQueued(ctx context.Context, cn *pool.Conn, rd
 type Client struct {
 	*baseClient
 	cmdable
+	autopipeliner *AutoPipeliner
 }
 
 // NewClient returns a client to the Redis Server specified by Options.
@@ -1083,6 +1090,16 @@ func (c *Client) init() {
 	})
 }
 
+func (c *Client) WithAutoPipeline() AutoPipelinedClient {
+	if c.autopipeliner != nil {
+		if !c.autopipeliner.closed.Load() {
+			return c.autopipeliner
+		}
+	}
+	c.autopipeliner = c.AutoPipeline()
+	return c.autopipeliner
+}
+
 func (c *Client) WithTimeout(timeout time.Duration) *Client {
 	clone := *c
 	clone.baseClient = c.baseClient.withTimeout(timeout)
@@ -1165,6 +1182,37 @@ func (c *Client) Pipeline() Pipeliner {
 	return &pipe
 }
 
+// AutoPipeline creates a new autopipeliner that automatically batches commands.
+// Commands are automatically flushed based on batch size and time interval.
+// The autopipeliner must be closed when done to flush pending commands.
+//
+// Example:
+//
+//	ap := client.AutoPipeline()
+//	defer ap.Close()
+//
+//	var wg sync.WaitGroup
+//	for i := 0; i < 1000; i++ {
+//	    wg.Add(1)
+//	    go func(idx int) {
+//	        defer wg.Done()
+//	        ap.Do(ctx, "SET", fmt.Sprintf("key%d", idx), idx)
+//	    }(i)
+//	}
+//	wg.Wait()
+//
+// Note: AutoPipeline requires AutoPipelineConfig to be set in Options.
+// If not set, default configuration will be used.
+func (c *Client) AutoPipeline() *AutoPipeliner {
+	if c.autopipeliner != nil {
+		return c.autopipeliner
+	}
+	if c.opt.AutoPipelineConfig == nil {
+		c.opt.AutoPipelineConfig = DefaultAutoPipelineConfig()
+	}
+	return NewAutoPipeliner(c, c.opt.AutoPipelineConfig)
+}
+
 func (c *Client) TxPipelined(ctx context.Context, fn func(Pipeliner) error) ([]Cmder, error) {
 	return c.TxPipeline().Pipelined(ctx, fn)
 }