Move adding the source code to the end, so that the busybox rootfs
doesn't have to be fetched again on each code change.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The line we are parsing looks like this
> flags : fpu vme de pse <...>
so look for "flags" as a prefix, not substring.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
The Err() method should be called after the Scan() loop, not inside it.
Found by
git grep -A3 -F '.Scan()' | grep Err
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Remove joinCgroupsV2() function, as its name and second parameter
are misleading. Use createCgroupsv2Path() directly, do not call
getv2Path() twice.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Function getSubsystemPath(), while works for v2 unified case, is
suboptimal, as it does a few unnecessary calls.
Add a simplified version of getSubsystemPath(), called getv2Path(),
and use it.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
This code is a copy-paste from cgroupv1 systemd code. Its aim
is to check whether a subsystem is available, and skip those
that are not.
In case v2 unified hierarchy is used, getSubsystemPath never
returns "not found" error, so calling it is useless.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Cgroup v1 kernel doc [1] says:
> We can write "-1" to reset the ``*.limit_in_bytes(unlimited)``.
and cgroup v2 kernel documentation [2] says:
> - If a controller implements an absolute resource guarantee and/or
> limit, the interface files should be named "min" and "max"
> respectively. If a controller implements best effort resource
> guarantee and/or limit, the interface files should be named "low"
> and "high" respectively.
>
> In the above four control files, the special token "max" should be
> used to represent upward infinity for both reading and writing.
Allow -1 value to still be used for v2, converting it to "max"
where it makes sense to do so.
This fixes the following issue:
> runc update test_update --memory-swap -1:
> error while setting cgroup v2: [write /sys/fs/cgroup/machine.slice/runc-cgroups-integration-test.scope/memory.swap.max: invalid argument
> failed to write "-1" to "/sys/fs/cgroup/machine.slice/runc-cgroups-integration-test.scope/memory.swap.max"
> github.com/opencontainers/runc/libcontainer/cgroups/fscommon.WriteFile
> /home/kir/go/src/github.com/opencontainers/runc/libcontainer/cgroups/fscommon/fscommon.go:21
> github.com/opencontainers/runc/libcontainer/cgroups/fs2.setMemory
> /home/kir/go/src/github.com/opencontainers/runc/libcontainer/cgroups/fs2/memory.go:20
> github.com/opencontainers/runc/libcontainer/cgroups/fs2.(*manager).Set
> /home/kir/go/src/github.com/opencontainers/runc/libcontainer/cgroups/fs2/fs2.go:175
> github.com/opencontainers/runc/libcontainer/cgroups/systemd.(*UnifiedManager).Set
> /home/kir/go/src/github.com/opencontainers/runc/libcontainer/cgroups/systemd/unified_hierarchy.go:290
> github.com/opencontainers/runc/libcontainer.(*linuxContainer).Set
> /home/kir/go/src/github.com/opencontainers/runc/libcontainer/container_linux.go:211
[1] linux/Documentation/admin-guide/cgroup-v1/memory.rst
[2] linux/Documentation/admin-guide/cgroup-v2.rst
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
To the best of my knowledge, it has been decided to drop the kernel
memory controller from the cgroupv2 hierarchy, so "kernel memory limits"
do not exist if we're using v2 unified.
So, we need to ignore kernel memory setting. This was already done in
non-systemd case (see commit 88e8350de), let's do the same for systemd.
This fixes the following error:
> container_linux.go:349: starting container process caused "process_linux.go:306: applying cgroup configuration for process caused \"open /sys/fs/cgroup/machine.slice/runc-cgroups-integration-test.scope/tasks: no such file or directory\""
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
1. rootfs is already validated to be kosher by (*ConfigValidator).rootfs()
2. mount points from /proc/self/mountinfo are absolute and clean, too
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Delete libcontainer/mount in favor of github.com/moby/sys/mountinfo,
which is fast mountinfo parser.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
When github is giving HTTP 404 (or other error), it still sends some
document (to be viewed in a browser), but we have tar on the other end
of the pipe, so the end result is like this:
> Step 13/13 : RUN . tests/integration/multi-arch.bash && curl -o- -sSL `get_busybox` | tar xfJC - ${ROOTFS}
> 4872 ---> Running in ad84646a69f3
> 4873xz: (stdin): File format not recognized
> 4874tar: Child returned status 1
> 4875tar: Error is not recoverable: exiting now
> 4876The command '/bin/sh -c . tests/integration/multi-arch.bash && curl -o- -sSL `get_busybox` | tar xfJC - ${ROOTFS}' returned a non-zero code: 2
Add -f switch to curl, so it will display an HTTP error and exit:
> curl: (22) The requested URL returned error: 404 Not Found
> xz: (stdin): File format not recognized
> tar: Child returned status 1
> tar: Error is not recoverable: exiting now
While at it, also
* remove -v from criu untar (too much output)
* remove -o - from curl (it does the same by default)
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
1. Return earlier if there is an error.
2. Do not use filepath.Split on every entry, use info.Name() instead.
3. Make readProcsFile() accept file name as an argument, to avoid
unnecessary file name and directory splitting and merging.
4. Skip on info.IsDir() -- this avoids an error when cgroup name is
set to "cgroup.procs".
This is still not very good since filepath.Walk() performs an unnecessary
stat(2) on every entry, but better than before.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
fmt.Sprintf is slow and is not needed here, string concatenation would
be sufficient. It is also redundant to convert []byte from string and
back, since `bytes` package now provides the same functions as `strings`.
Use Fields() instead of TrimSpace() and Split(), mainly for readability
(note Fields() is somewhat slower than Split() but here it doesn't
matter much).
Use Join() to prepend the plus signs.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Golang 1.14 introduces asynchronous preemption which results into
applications getting frequent EINTR (syscall interrupted) errors when
invoking slow syscalls, e.g. when writing to cgroup files.
As writing to cgroups is idempotent, it is safe to retry writing to the
file whenever the write syscall is interrupted.
Signed-off-by: Mario Nitchev <marionitchev@gmail.com>
If checkpointing a container with '--leave-running' runc started to
print the following message:
ERRO[0000] container is not destroyed
The message is correct, because CRIU did not terminate the process, but
as that was requested by the user the message is wrong.
So now the container is only destroyed if the user did not specify
'--leave-running'.
Signed-off-by: Adrian Reber <areber@redhat.com>
Since [1], x/sys/unix has a function to convert signal name
to a number. Let's use it and drop home-grown signal map.
While at it, add a test case.
[1] d455e41777
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
