Summary:
Allow the server/client transport to initiate periodic key update. It's defaulted to being disabled.
The new logic for initiating and verifying a key update was handled correctly by the peer is consolidated in QuicTransportFunctions.
Reviewed By: mjoras
Differential Revision: D53109624
fbshipit-source-id: 0c3a944978fc0e0a84252da953dc116aa7c26379
Summary: This implements the necessary functions for key update in the ClientHandshake, and adds the logic for updating the write cipher in the client transfer whenever a successful key update is detected by the read codec.
Reviewed By: mjoras
Differential Revision: D53016558
fbshipit-source-id: 59123cddec97ee5eb204b8816e7c844b22055008
Summary:
The current open connection counting is broken. To fix it this change:
- moves the counter to be for both the server and client transport
- calls onNewConnection() when the transport is ready.
- calls onConnectionClose() when the transport is closed after it was ready.
Reviewed By: lnicco, frankfeir
Differential Revision: D52638628
fbshipit-source-id: bcff7a8c671f8eede53c22e698e1b95332c56959
Summary:
This is the major transition that updates mvfst code to use the new interfaces. The new Folly implementations of the interfaces maintain all the existing behavior of folly types so this should not introduce any functional change. The core changes are:
- Update the BatchWriters to use the new interfaces.
- Update the FunctionLooper to use the new interfaces.
- Change QuicServerTransport to take the folly types and wrap them in the new types for use in the QuicTransportBase.
The rest of the diff is for updating all the existing uses of the QuicTrasnport to initialize the necessary types and pass them to the QUIC transport instead of directly passing folly types.
Reviewed By: mjoras
Differential Revision: D51413481
fbshipit-source-id: 5ed607e12b9a52b96148ad9b4f8f43899655d936
Summary:
print both target ip address as well as the port number to differentiate healthcheckers for different vips. P891229315
log an error message in QuicHealthChecker::onConnectError
log error messages when QuicClientTransport receives problematic packets
Reviewed By: jbeshay
Differential Revision: D51600371
fbshipit-source-id: 82c37b162e7808058d13093ff871ba06b694b70a
Summary:
This diff renames `ReceivedPacket` to `ReceivedUdpPacket` to clarify that it maps to a UDP packet and not a QUIC packet. A single UDP packet can contain multiple QUIC packets due to coalescing.
--
This diff is part of a larger stack focused on the following:
- **Cleaning up client and server UDP packet receive paths while improving testability.** We currently have multiple receive paths for client and server. Capabilities vary significantly and there are few tests. For instance:
- The server receive path supports socket RX timestamps, abet incorrectly in that it does not store timestamp per packet. In comparison, the client receive path does not currently support socket RX timestamps, although the code in `QuicClientTransport::recvmsg` and `QuicClientTransport::recvmmsg` makes reference to socket RX timestamps, making it confusing to understand the capabilities available when tracing through the code. This complicates the tests in `QuicTypedTransportTests`, as we have to disable test logic that depends on socket RX timestamps for client tests.
- The client currently has three receive paths, and none of them are well tested.
- **Modularize and abstract components in the receive path.** This will make it easier to mock/fake the UDP socket and network layers.
- `QuicClientTransport` and `QuicServerTransport` currently contain UDP socket handling logic that operates over lower layer primitives such `cmsg` and `io_vec` (see `QuicClientTransport::recvmmsg` and `...::recvmsg` as examples).
- Because this UDP socket handling logic is inside of the mvfst transport implementations, it is difficult to test this logic in isolation and mock/fake the underlying socket and network layers. For instance, injecting a user space network emulator that operates at the socket layer would require faking `folly::AsyncUDPSocket`, which is non-trivial given that `AsyncUDPSocket` does not abstract away intricacies arising from the aforementioned lower layer primitives.
- By shifting this logic into an intermediate layer between the transport and the underlying UDP socket, it will be easier to mock out the UDP socket layer when testing functionality at higher layers, and inject fake components when we want to emulate the network between a mvfst client and server. It will also be easier for us to have unit tests focused on testing interactions between the UDP socket implementation and this intermediate layer.
- **Improving receive path timestamping.** We only record a single timestamp per `NetworkData` at the moment, but (1) it is possible for a `NetworkData` to have multiple packets, each with their own timestamps, and (2) we should be able to record both userspace and socket timestamps.
Reviewed By: silver23arrow
Differential Revision: D48788809
fbshipit-source-id: 3793c30212d545e226f3e5337289bc2601dfa553
Summary:
This diff renames `updateLargestReceivedPacketNum` to `addPacketToAckState`, and changes the function signature so that it takes the structure of `ReceivedPacket::Timings` instead of just a single receive timestamp. This allows us to plumb through steady clock and socket timestamps.
The current caller to `updateLargestReceivedPacketNum` had a `ReceivedPacket::Timings` and just passed the`receiveTimePoint` field from that structure to to `updateLargestReceivedPacketNum`
```
uint64_t distanceFromExpectedPacketNum = updateLargestReceivedPacketNum(
conn, ackState, packetNum, readData.udpPacket.timings.receiveTimePoint);
```
Now, we just pass the entire `ReceivedPacket::Timings` structure and extract `receiveTimePoint` inside:
```
uint64_t distanceFromExpectedPacketNum = addPacketToAckState(
conn, ackState, packetNum, readData.udpPacket.timings);
```
--
This diff is part of a larger stack focused on the following:
- **Cleaning up client and server UDP packet receive paths while improving testability.** We currently have multiple receive paths for client and server. Capabilities vary significantly and there are few tests. For instance:
- The server receive path supports socket RX timestamps, abet incorrectly in that it does not store timestamp per packet. In comparison, the client receive path does not currently support socket RX timestamps, although the code in `QuicClientTransport::recvmsg` and `QuicClientTransport::recvmmsg` makes reference to socket RX timestamps, making it confusing to understand the capabilities available when tracing through the code. This complicates the tests in `QuicTypedTransportTests`, as we have to disable test logic that depends on socket RX timestamps for client tests.
- The client currently has three receive paths, and none of them are well tested.
- **Modularize and abstract components in the receive path.** This will make it easier to mock/fake the UDP socket and network layers.
- `QuicClientTransport` and `QuicServerTransport` currently contain UDP socket handling logic that operates over lower layer primitives such `cmsg` and `io_vec` (see `QuicClientTransport::recvmmsg` and `...::recvmsg` as examples).
- Because this UDP socket handling logic is inside of the mvfst transport implementations, it is difficult to test this logic in isolation and mock/fake the underlying socket and network layers. For instance, injecting a user space network emulator that operates at the socket layer would require faking `folly::AsyncUDPSocket`, which is non-trivial given that `AsyncUDPSocket` does not abstract away intricacies arising from the aforementioned lower layer primitives.
- By shifting this logic into an intermediate layer between the transport and the underlying UDP socket, it will be easier to mock out the UDP socket layer when testing functionality at higher layers, and inject fake components when we want to emulate the network between a mvfst client and server. It will also be easier for us to have unit tests focused on testing interactions between the UDP socket implementation and this intermediate layer.
- **Improving receive path timestamping.** We only record a single timestamp per `NetworkData` at the moment, but (1) it is possible for a `NetworkData` to have multiple packets, each with their own timestamps, and (2) we should be able to record both userspace and socket timestamps.
Differential Revision: D48785086
fbshipit-source-id: 48a424e3e27918a8efe41918e0bcfa57337d9337
Summary:
This diff makes the flow of `processUdpPacket` a bit clearer through the use of scoping and comments.
--
This diff is part of a larger stack focused on the following:
- **Cleaning up client and server UDP packet receive paths while improving testability.** We currently have multiple receive paths for client and server. Capabilities vary significantly and there are few tests. For instance:
- The server receive path supports socket RX timestamps, abet incorrectly in that it does not store timestamp per packet. In comparison, the client receive path does not currently support socket RX timestamps, although the code in `QuicClientTransport::recvmsg` and `QuicClientTransport::recvmmsg` makes reference to socket RX timestamps, making it confusing to understand the capabilities available when tracing through the code. This complicates the tests in `QuicTypedTransportTests`, as we have to disable test logic that depends on socket RX timestamps for client tests.
- The client currently has three receive paths, and none of them are well tested.
- **Modularize and abstract components in the receive path.** This will make it easier to mock/fake the UDP socket and network layers.
- `QuicClientTransport` and `QuicServerTransport` currently contain UDP socket handling logic that operates over lower layer primitives such `cmsg` and `io_vec` (see `QuicClientTransport::recvmmsg` and `...::recvmsg` as examples).
- Because this UDP socket handling logic is inside of the mvfst transport implementations, it is difficult to test this logic in isolation and mock/fake the underlying socket and network layers. For instance, injecting a user space network emulator that operates at the socket layer would require faking `folly::AsyncUDPSocket`, which is non-trivial given that `AsyncUDPSocket` does not abstract away intricacies arising from the aforementioned lower layer primitives.
- By shifting this logic into an intermediate layer between the transport and the underlying UDP socket, it will be easier to mock out the UDP socket layer when testing functionality at higher layers, and inject fake components when we want to emulate the network between a mvfst client and server. It will also be easier for us to have unit tests focused on testing interactions between the UDP socket implementation and this intermediate layer.
- **Improving receive path timestamping.** We only record a single timestamp per `NetworkData` at the moment, but (1) it is possible for a `NetworkData` to have multiple packets, each with their own timestamps, and (2) we should be able to record both userspace and socket timestamps.
Reviewed By: silver23arrow
Differential Revision: D48739220
fbshipit-source-id: c8fa47a2704a557aee37dd8479b330c37564f1b1
Summary:
This diff drops `NetworkDataSingle` in favor of `ReceivedPacket`. The latter contains a `ReceivedPacket::Timings` field that has the same `receiveTimePoint` currently in `NetworkDataSingle`, while also providing other useful signals.
--
This diff is part of a larger stack focused on the following:
- **Cleaning up client and server UDP packet receive paths while improving testability.** We currently have multiple receive paths for client and server. Capabilities vary significantly and there are few tests. For instance:
- The server receive path supports socket RX timestamps, abet incorrectly in that it does not store timestamp per packet. In comparison, the client receive path does not currently support socket RX timestamps, although the code in `QuicClientTransport::recvmsg` and `QuicClientTransport::recvmmsg` makes reference to socket RX timestamps, making it confusing to understand the capabilities available when tracing through the code. This complicates the tests in `QuicTypedTransportTests`, as we have to disable test logic that depends on socket RX timestamps for client tests.
- The client currently has three receive paths, and none of them are well tested.
- **Modularize and abstract components in the receive path.** This will make it easier to mock/fake the UDP socket and network layers.
- `QuicClientTransport` and `QuicServerTransport` currently contain UDP socket handling logic that operates over lower layer primitives such `cmsg` and `io_vec` (see `QuicClientTransport::recvmmsg` and `...::recvmsg` as examples).
- Because this UDP socket handling logic is inside of the mvfst transport implementations, it is difficult to test this logic in isolation and mock/fake the underlying socket and network layers. For instance, injecting a user space network emulator that operates at the socket layer would require faking `folly::AsyncUDPSocket`, which is non-trivial given that `AsyncUDPSocket` does not abstract away intricacies arising from the aforementioned lower layer primitives.
- By shifting this logic into an intermediate layer between the transport and the underlying UDP socket, it will be easier to mock out the UDP socket layer when testing functionality at higher layers, and inject fake components when we want to emulate the network between a mvfst client and server. It will also be easier for us to have unit tests focused on testing interactions between the UDP socket implementation and this intermediate layer.
- **Improving receive path timestamping.** We only record a single timestamp per `NetworkData` at the moment, but (1) it is possible for a `NetworkData` to have multiple packets, each with their own timestamps, and (2) we should be able to record both userspace and socket timestamps
Reviewed By: silver23arrow
Differential Revision: D48739219
fbshipit-source-id: fc2cdb7b425d68c729dd3bec00b6c6ff3c4bf8ec
Summary:
This diff renames two functions in `QuicClientTransport` and adds docstrings to clarify their purpose:
- `processUDPData` is changed to `processUdpPacket`. While it is true that this function may result in data from prior UDP packets being processed (data can be deferred), this function is invoked when there is a new UDP packet to process, and so this naming seems clear IMHO.
- `processPacketData` is changed to `processUdpPacketData`, as this function focuses on processing data from UDP packets, including both the packet passed in and prior packets. A single UDP packet may contain multiple QUIC packets due to coalescing (see RFC 9000, section 12.2).
--
This diff is part of a larger stack focused on the following:
- **Cleaning up client and server UDP packet receive paths while improving testability.** We currently have multiple receive paths for client and server. Capabilities vary significantly and there are few tests. For instance:
- The server receive path supports socket RX timestamps, abet incorrectly in that it does not store timestamp per packet. In comparison, the client receive path does not currently support socket RX timestamps, although the code in `QuicClientTransport::recvmsg` and `QuicClientTransport::recvmmsg` makes reference to socket RX timestamps, making it confusing to understand the capabilities available when tracing through the code. This complicates the tests in `QuicTypedTransportTests`, as we have to disable test logic that depends on socket RX timestamps for client tests.
- The client currently has three receive paths, and none of them are well tested.
- **Modularize and abstract components in the receive path.** This will make it easier to mock/fake the UDP socket and network layers.
- `QuicClientTransport` and `QuicServerTransport` currently contain UDP socket handling logic that operates over lower layer primitives such `cmsg` and `io_vec` (see `QuicClientTransport::recvmmsg` and `...::recvmsg` as examples).
- Because this UDP socket handling logic is inside of the mvfst transport implementations, it is difficult to test this logic in isolation and mock/fake the underlying socket and network layers. For instance, injecting a user space network emulator that operates at the socket layer would require faking `folly::AsyncUDPSocket`, which is non-trivial given that `AsyncUDPSocket` does not abstract away intricacies arising from the aforementioned lower layer primitives.
- By shifting this logic into an intermediate layer between the transport and the underlying UDP socket, it will be easier to mock out the UDP socket layer when testing functionality at higher layers, and inject fake components when we want to emulate the network between a mvfst client and server. It will also be easier for us to have unit tests focused on testing interactions between the UDP socket implementation and this intermediate layer.
- **Improving receive path timestamping.** We only record a single timestamp per `NetworkData` at the moment, but (1) it is possible for a `NetworkData` to have multiple packets, each with their own timestamps, and (2) we should be able to record both userspace and socket timestamps.
Reviewed By: silver23arrow
Differential Revision: D48726630
fbshipit-source-id: 9f2b008b09db024c1ffd679252f52ce77fcbd38e
Summary: The code claims we need to save the index "so we can recycle the unused buffers", but the index isn't being used elsewhere. Simplifying.
Reviewed By: jbeshay
Differential Revision: D48726290
fbshipit-source-id: 55c9b48802e74b918a1ff4bd2bb78384a04b9b55
Summary:
This diff updates functions in `QuicClientTransport` so that instead of passing through a single TimePoint — `receiveTimePoint` — they pass through `ReceivedPacket::PacketTimings`. The latter will enable us to have richer timestamp information elsewhere in the stack, including access to `SteadyClock` and `SystemClock` socket and userspace timestamps recorded on receive.
--
This diff is part of a larger stack focused on the following:
- **Cleaning up client and server UDP packet receive paths while improving testability.** We currently have multiple receive paths for client and server. Capabilities vary significantly and there are few tests. For instance:
- The server receive path supports socket RX timestamps, abet incorrectly in that it does not store timestamp per packet. In comparison, the client receive path does not currently support socket RX timestamps, although the code in `QuicClientTransport::recvmsg` and `QuicClientTransport::recvmmsg` makes reference to socket RX timestamps, making it confusing to understand the capabilities available when tracing through the code. This complicates the tests in `QuicTypedTransportTests`, as we have to disable test logic that depends on socket RX timestamps for client tests.
- The client currently has three receive paths, and none of them are well tested.
- **Modularize and abstract components in the receive path.** This will make it easier to mock/fake the UDP socket and network layers.
- `QuicClientTransport` and `QuicServerTransport` currently contain UDP socket handling logic that operates over lower layer primitives such `cmsg` and `io_vec` (see `QuicClientTransport::recvmmsg` and `...::recvmsg` as examples).
- Because this UDP socket handling logic is inside of the mvfst transport implementations, it is difficult to test this logic in isolation and mock/fake the underlying socket and network layers. For instance, injecting a user space network emulator that operates at the socket layer would require faking `folly::AsyncUDPSocket`, which is non-trivial given that `AsyncUDPSocket` does not abstract away intricacies arising from the aforementioned lower layer primitives.
- By shifting this logic into an intermediate layer between the transport and the underlying UDP socket, it will be easier to mock out the UDP socket layer when testing functionality at higher layers, and inject fake components when we want to emulate the network between a mvfst client and server. It will also be easier for us to have unit tests focused on testing interactions between the UDP socket implementation and this intermediate layer.
- **Improving receive path timestamping.** We only record a single timestamp per `NetworkData` at the moment, but (1) it is possible for a `NetworkData` to have multiple packets, each with their own timestamps, and (2) we should be able to record both userspace and socket timestamps.
Reviewed By: jbeshay
Differential Revision: D48726538
fbshipit-source-id: 70d3bf4b1a5c6b7aef4424a9c054d5362220ad8f
Summary:
This diff changes `NetworkData` so that the `totalData_` field is set by the constructor and updated on each call to `addPacket()`. This in turn removes the need for `NetworkData::setTotalData()`.
--
This diff is part of a larger stack focused on the following:
- **Cleaning up client and server UDP packet receive paths while improving testability.** We currently have multiple receive paths for client and server. Capabilities vary significantly and there are few tests. For instance:
- The server receive path supports socket RX timestamps, abet incorrectly in that it does not store timestamp per packet. In comparison, the client receive path does not currently support socket RX timestamps, although the code in `QuicClientTransport::recvmsg` and `QuicClientTransport::recvmmsg` makes reference to socket RX timestamps, making it confusing to understand the capabilities available when tracing through the code. This complicates the tests in `QuicTypedTransportTests`, as we have to disable test logic that depends on socket RX timestamps for client tests.
- The client currently has three receive paths, and none of them are well tested.
- **Modularize and abstract components in the receive path.** This will make it easier to mock/fake the UDP socket and network layers.
- `QuicClientTransport` and `QuicServerTransport` currently contain UDP socket handling logic that operates over lower layer primitives such `cmsg` and `io_vec` (see `QuicClientTransport::recvmmsg` and `...::recvmsg` as examples).
- Because this UDP socket handling logic is inside of the mvfst transport implementations, it is difficult to test this logic in isolation and mock/fake the underlying socket and network layers. For instance, injecting a user space network emulator that operates at the socket layer would require faking `folly::AsyncUDPSocket`, which is non-trivial given that `AsyncUDPSocket` does not abstract away intricacies arising from the aforementioned lower layer primitives.
- By shifting this logic into an intermediate layer between the transport and the underlying UDP socket, it will be easier to mock out the UDP socket layer when testing functionality at higher layers, and inject fake components when we want to emulate the network between a mvfst client and server. It will also be easier for us to have unit tests focused on testing interactions between the UDP socket implementation and this intermediate layer.
- **Improving receive path timestamping.** We only record a single timestamp per `NetworkData` at the moment, but (1) it is possible for a `NetworkData` to have multiple packets, each with their own timestamps, and (2) we should be able to record both userspace and socket timestamps.
Reviewed By: jbeshay
Differential Revision: D48726289
fbshipit-source-id: ca54d1d023d37cf22c45702e74638c5db1c019d9
Summary:
This diff:
1. Introduces a new `ReceivedPacket::Timings` structure, which will be expanded upon in subsequent diffs.
2. Adds a `ReceivedPacket::Timings` field to each `ReceivedPacket`
3. Uses the accessors added in the previous diff (D48724715) to populate the `ReceivedPacket::Timings` structure in each `ReceivedPacket` held by a `NetworkData` object. This is done by propagating the `NetworkData::receiveTimePoint` field to all `ReceivedPacket` held in a `NetworkData.` This propagation occurs each time a `ReceivedPacket` is added. The value is propagated again if the `NetworkData::receiveTimePoint` field is updated by looping over all previously added `ReceivedPacket`.
--
This diff is part of a larger stack focused on the following:
- **Cleaning up client and server UDP packet receive paths while improving testability.** We currently have multiple receive paths for client and server. Capabilities vary significantly and there are few tests. For instance:
- The server receive path supports socket RX timestamps, abet incorrectly in that it does not store timestamp per packet. In comparison, the client receive path does not currently support socket RX timestamps, although the code in `QuicClientTransport::recvmsg` and `QuicClientTransport::recvmmsg` makes reference to socket RX timestamps, making it confusing to understand the capabilities available when tracing through the code. This complicates the tests in `QuicTypedTransportTests`, as we have to disable test logic that depends on socket RX timestamps for client tests.
- The client currently has three receive paths, and none of them are well tested.
- **Modularize and abstract components in the receive path.** This will make it easier to mock/fake the UDP socket and network layers.
- `QuicClientTransport` and `QuicServerTransport` currently contain UDP socket handling logic that operates over lower layer primitives such `cmsg` and `io_vec` (see `QuicClientTransport::recvmmsg` and `...::recvmsg` as examples).
- Because this UDP socket handling logic is inside of the mvfst transport implementations, it is difficult to test this logic in isolation and mock/fake the underlying socket and network layers. For instance, injecting a user space network emulator that operates at the socket layer would require faking `folly::AsyncUDPSocket`, which is non-trivial given that `AsyncUDPSocket` does not abstract away intricacies arising from the aforementioned lower layer primitives.
- By shifting this logic into an intermediate layer between the transport and the underlying UDP socket, it will be easier to mock out the UDP socket layer when testing functionality at higher layers, and inject fake components when we want to emulate the network between a mvfst client and server. It will also be easier for us to have unit tests focused on testing interactions between the UDP socket implementation and this intermediate layer.
- **Improving receive path timestamping.** We only record a single timestamp per `NetworkData` at the moment, but (1) it is possible for a `NetworkData` to have multiple packets, each with their own timestamps, and (2) we should be able to record both userspace and socket timestamps.
Reviewed By: jbeshay
Differential Revision: D48725209
fbshipit-source-id: 580e7d7d1f3587f9947774b5ed19e9985df404c9
Summary:
This diff makes the fields in `NetworkData` private so that they can only be manipulated via accessors.
- This will be used in a subsequent diff to make it possible to populate a new `ReceivedPacket::Timings` structure in each `ReceivedPacket` held by a `NetworkData` object with the timing information currently held in `NetworkData.`
- These accessors are temporary and being used to split up the stack, so relying on existing tests to provide coverage instead of adding new tests here.
--
This diff is part of a larger stack focused on the following:
- **Cleaning up client and server UDP packet receive paths while improving testability.** We currently have multiple receive paths for client and server. Capabilities vary significantly and there are few tests. For instance:
- The server receive path supports socket RX timestamps, abet incorrectly in that it does not store timestamp per packet. In comparison, the client receive path does not currently support socket RX timestamps, although the code in `QuicClientTransport::recvmsg` and `QuicClientTransport::recvmmsg` makes reference to socket RX timestamps, making it confusing to understand the capabilities available when tracing through the code. This complicates the tests in `QuicTypedTransportTests`, as we have to disable test logic that depends on socket RX timestamps for client tests.
- The client currently has three receive paths, and none of them are well tested.
- **Modularize and abstract components in the receive path.** This will make it easier to mock/fake the UDP socket and network layers.
- `QuicClientTransport` and `QuicServerTransport` currently contain UDP socket handling logic that operates over lower layer primitives such `cmsg` and `io_vec` (see `QuicClientTransport::recvmmsg` and `...::recvmsg` as examples).
- Because this UDP socket handling logic is inside of the mvfst transport implementations, it is difficult to test this logic in isolation and mock/fake the underlying socket and network layers. For instance, injecting a user space network emulator that operates at the socket layer would require faking `folly::AsyncUDPSocket`, which is non-trivial given that `AsyncUDPSocket` does not abstract away intricacies arising from the aforementioned lower layer primitives.
- By shifting this logic into an intermediate layer between the transport and the underlying UDP socket, it will be easier to mock out the UDP socket layer when testing functionality at higher layers, and inject fake components when we want to emulate the network between a mvfst client and server. It will also be easier for us to have unit tests focused on testing interactions between the UDP socket implementation and this intermediate layer.
- **Improving receive path timestamping.** We only record a single timestamp per `NetworkData` at the moment, but (1) it is possible for a `NetworkData` to have multiple packets, each with their own timestamps, and (2) we should be able to record both userspace and socket timestamps.
Reviewed By: jbeshay
Differential Revision: D48724715
fbshipit-source-id: 0230ea3feea525fa15b908161f444f4f6d9d4b39
Summary:
- Remove setCustomTransportParameter, which (based on the quic v19 rfc), verifies whether a parameter is within the private range [0xff00, 0xffff]
> Values with the first byte in the range 0x00 to 0xfe (in hexadecimal) are assigned via the Specification Required policy [RFC8126].
- Consolidating adding MaxStreamGroups transport parameter into all other transport parameters extension.
More specifically, `QuicClientTransport::maybeEnableStreamGroups()` logic is now moved into `QuicClientTransport::setSupportedExtensionTransportParameters()`
Reviewed By: mjoras
Differential Revision: D50461610
fbshipit-source-id: 802b546c8364586cdcf36a230b156ca140c57ce4
Summary:
Empty read soft-errors were only exposed by the new receive path and is most likely an existing problem. See T165110918 for details.
Re-introducing the new Rx codepath so we can get Rx timestamps
Reviewed By: hanidamlaj
Differential Revision: D50041945
fbshipit-source-id: 14bba868e2368ceac881d42784b55e9dd879526f
Summary:
This diff adds `recvmmsg` to the `QuicAsyncUDPSocketWrapper` interface and adds a concrete implementation to `QuicAsyncUDPSocketWrapperImpl`
- The concrete implementation is largely a copy/paste of what we have in `QuicClientTransport::recvmmsg` today.
- A new transport setting is added — `shouldUseWrapperRecvmmsgForBatchRecv` — to determine if `QuicAsyncUDPSocketWrapperImpl::recvmmsg` should be used. It is currently disabled for all use cases.
--
This diff is part of a larger stack focused on the following:
- **Cleaning up client and server UDP packet receive paths while improving testability.** We currently have multiple receive paths for client and server. Capabilities vary significantly and there are few tests. For instance:
- The server receive path supports socket RX timestamps, abet incorrectly in that it does not store timestamp per packet. In comparison, the client receive path does not currently support socket RX timestamps, although the code in `QuicClientTransport::recvmsg` and `QuicClientTransport::recvmmsg` makes reference to socket RX timestamps, making it confusing to understand the capabilities available when tracing through the code. This complicates the tests in `QuicTypedTransportTests`, as we have to disable test logic that depends on socket RX timestamps for client tests.
- The client currently has three receive paths, and none of them are well tested.
- **Modularize and abstract components in the receive path.** This will make it easier to mock/fake the UDP socket and network layers.
- `QuicClientTransport` and `QuicServerTransport` currently contain UDP socket handling logic that operates over lower layer primitives such `cmsg` and `io_vec` (see `QuicClientTransport::recvmmsg` and `...::recvmsg` as examples).
- Because this UDP socket handling logic is inside of the mvfst transport implementations, it is difficult to test this logic in isolation and mock/fake the underlying socket and network layers. For instance, injecting a user space network emulator that operates at the socket layer would require faking `folly::AsyncUDPSocket`, which is non-trivial given that `AsyncUDPSocket` does not abstract away intricacies arising from the aforementioned lower layer primitives.
- By shifting this logic into an intermediate layer between the transport and the underlying UDP socket, it will be easier to mock out the UDP socket layer when testing functionality at higher layers, and inject fake components when we want to emulate the network between a mvfst client and server. It will also be easier for us to have unit tests focused on testing interactions between the UDP socket implementation and this intermediate layer.
- **Improving receive path timestamping.** We only record a single timestamp per `NetworkData` at the moment, but (1) it is possible for a `NetworkData` to have multiple packets, each with their own timestamps, and (2) we should be able to record both userspace and socket timestamps.
Reviewed By: silver23arrow
Differential Revision: D48719751
fbshipit-source-id: d08f95823b917fa01dff04757b0ceabbf691a0ca
Summary:
`controlVec` in `QuicClientTransport::recvmmsg` is only allocated if `useGRO` is set to true. However, `controlVec` is also used if `useTS` is set to true, and thus must be allocated then as well.
We haven't caught this in the past because `recvmsg` has been used with both options enabled; this indicates insufficient parameterized testing. Fixing this in a subsequent change as we transition `recvmmsg` out of the transport.
Credit to silver23arrow for discovering this issue in other stack.
Reviewed By: silver23arrow
Differential Revision: D49479158
fbshipit-source-id: a01bc9be2290a75d7ac1e4d9fc4a1398c0548f83
Summary:
This diff defines `QuicAsyncUDPSocketWrapper::ReadCallback` and implements a transformation layer to enable types that inherit from `QuicAsyncUDPSocketWrapper::ReadCallback` to operate on `QuicAsyncUDPSocketWrapper` objects instead of `QuicAsyncUDPSocketType` objects.
More specifically:
1. `QuicAsyncUDPSocketWrapper::ReadCallback` inherits from `QuicAsyncUDPSocketType::ReadCallback`.
2. `QuicAsyncUDPSocketWrapper::ReadCallback` defines `QuicAsyncUDPSocketWrapper::onNotifyDataAvailable`. This function signature of this callback differs from `QuicAsyncUDPSocketType::onNotifyDataAvailable` in that the `QuicAsyncUDPSocketWrapper` version passes a reference to a `QuicAsyncUDPSocketWrapper` object instead of a reference to a `QuicAsyncUDPSocketType` object.
3. `QuicAsyncUDPSocketWrapper::ReadCallback` implements `QuicAsyncUDPSocketType::onNotifyDataAvailable` and relays to `QuicAsyncUDPSocketWrapper::onNotifyDataAvailable`
--
This diff is part of a larger stack focused on the following:
- **Cleaning up client and server UDP packet receive paths while improving testability.** We currently have multiple receive paths for client and server. Capabilities vary significantly and there are few tests. For instance:
- The server receive path supports socket RX timestamps, abet incorrectly in that it does not store timestamp per packet. In comparison, the client receive path does not currently support socket RX timestamps, although the code in `QuicClientTransport::recvmsg` and `QuicClientTransport::recvmmsg` makes reference to socket RX timestamps, making it confusing to understand the capabilities available when tracing through the code. This complicates the tests in `QuicTypedTransportTests`, as we have to disable test logic that depends on socket RX timestamps for client tests.
- The client currently has three receive paths, and none of them are well tested.
- **Modularize and abstract components in the receive path.** This will make it easier to mock/fake the UDP socket and network layers.
- `QuicClientTransport` and `QuicServerTransport` currently contain UDP socket handling logic that operates over lower layer primitives such `cmsg` and `io_vec` (see `QuicClientTransport::recvmmsg` and `...::recvmsg` as examples).
- Because this UDP socket handling logic is inside of the mvfst transport implementations, it is difficult to test this logic in isolation and mock/fake the underlying socket and network layers. For instance, injecting a user space network emulator that operates at the socket layer would require faking `folly::AsyncUDPSocket`, which is non-trivial given that `AsyncUDPSocket` does not abstract away intricacies arising from the aforementioned lower layer primitives.
- By shifting this logic into an intermediate layer between the transport and the underlying UDP socket, it will be easier to mock out the UDP socket layer when testing functionality at higher layers, and inject fake components when we want to emulate the network between a mvfst client and server. It will also be easier for us to have unit tests focused on testing interactions between the UDP socket implementation and this intermediate layer.
- **Improving receive path timestamping.** We only record a single timestamp per `NetworkData` at the moment, but (1) it is possible for a `NetworkData` to have multiple packets, each with their own timestamps, and (2) we should be able to record both userspace and socket timestamps.
Reviewed By: jbeshay
Differential Revision: D48718053
fbshipit-source-id: f7f7eb2fcc07b1523638bd4ce6e1c1804fd82737
Summary:
This diff changes `QuicAsyncUDPSocketWrapper` so that it is an abstraction layer that inherits from `QuicAsyncUDPSocketType`, instead of simply being a container with aliases.
- Key changes in `QuicAsyncUDPSocketWrapper.h`, the rest of the updates switch us from using `QuicAsyncUDPSocketType` to `QuicAsyncUDPSocketWrapper`.
- It's difficult to mock the UDP socket today given that we expose the entire `folly::AsyncUDPSocket` type to the higher layers of the QUIC stack. This complicates testing and emulation because any mock / fake has to implement low level primitives like `recvmmsg`, and because the `folly::AsyncUDPSocket` interface can change over time.
- Pure virtual functions will be defined in `QuicAsyncUDPSocketWrapper` in a follow up diff to start creating an interface between the higher layers of the mvfst QUIC stack and the UDP socket, and this interface will abstract away lower layer details such as `cmsgs` and `io_vec`, and instead focus on populating higher layer structures such as `NetworkData` and `ReceivedPacket` (D48714615). This will make it easier for us to mock or fake the UDP socket.
This diff relies on changes to `folly::MockAsyncUDPSocket` introduced in D48717389.
--
This diff is part of a larger stack focused on the following:
- **Cleaning up client and server UDP packet receive paths while improving testability.** We currently have multiple receive paths for client and server. Capabilities vary significantly and there are few tests. For instance:
- The server receive path supports socket RX timestamps, abet incorrectly in that it does not store timestamp per packet. In comparison, the client receive path does not currently support socket RX timestamps, although the code in `QuicClientTransport::recvmsg` and `QuicClientTransport::recvmmsg` makes reference to socket RX timestamps, making it confusing to understand the capabilities available when tracing through the code. This complicates the tests in `QuicTypedTransportTests`, as we have to disable test logic that depends on socket RX timestamps for client tests.
- The client currently has three receive paths, and none of them are well tested.
- **Modularize and abstract components in the receive path.** This will make it easier to mock/fake the UDP socket and network layers.
- `QuicClientTransport` and `QuicServerTransport` currently contain UDP socket handling logic that operates over lower layer primitives such `cmsg` and `io_vec` (see `QuicClientTransport::recvmmsg` and `...::recvmsg` as examples).
- Because this UDP socket handling logic is inside of the mvfst transport implementations, it is difficult to test this logic in isolation and mock/fake the underlying socket and network layers. For instance, injecting a user space network emulator that operates at the socket layer would require faking `folly::AsyncUDPSocket`, which is non-trivial given that `AsyncUDPSocket` does not abstract away intricacies arising from the aforementioned lower layer primitives.
- By shifting this logic into an intermediate layer between the transport and the underlying UDP socket, it will be easier to mock out the UDP socket layer when testing functionality at higher layers, and inject fake components when we want to emulate the network between a mvfst client and server. It will also be easier for us to have unit tests focused on testing interactions between the UDP socket implementation and this intermediate layer.
- **Improving receive path timestamping.** We only record a single timestamp per `NetworkData` at the moment, but (1) it is possible for a `NetworkData` to have multiple packets, each with their own timestamps, and (2) we should be able to record both userspace and socket timestamps.
Reviewed By: jbeshay, hanidamlaj
Differential Revision: D48717388
fbshipit-source-id: 4f34182a69ab1e619e454da19e357a6a2ee2b9ab
Summary:
This diff deprecates `QuicClientTransport::getReadBuffer`; this code path is no longer used with deprecation in D48715162
--
This diff is part of a larger stack focused on the following:
- **Cleaning up client and server UDP packet receive paths while improving testability.** We currently have multiple receive paths for client and server. Capabilities vary significantly and there are few tests. For instance:
- The server receive path supports socket RX timestamps, abet incorrectly in that it does not store timestamp per packet. In comparison, the client receive path does not currently support socket RX timestamps, although the code in `QuicClientTransport::recvmsg` and `QuicClientTransport::recvmmsg` makes reference to socket RX timestamps, making it confusing to understand the capabilities available when tracing through the code. This complicates the tests in `QuicTypedTransportTests`, as we have to disable test logic that depends on socket RX timestamps for client tests.
- The client currently has three receive paths, and none of them are well tested.
- **Modularize and abstract components in the receive path.** This will make it easier to mock/fake the UDP socket and network layers.
- `QuicClientTransport` and `QuicServerTransport` currently contain UDP socket handling logic that operates over lower layer primitives such `cmsg` and `io_vec` (see `QuicClientTransport::recvmmsg` and `...::recvmsg` as examples).
- Because this UDP socket handling logic is inside of the mvfst transport implementations, it is difficult to test this logic in isolation and mock/fake the underlying socket and network layers. For instance, injecting a user space network emulator that operates at the socket layer would require faking `folly::AsyncUDPSocket`, which is non-trivial given that `AsyncUDPSocket` does not abstract away intricacies arising from the aforementioned lower layer primitives.
- By shifting this logic into an intermediate layer between the transport and the underlying UDP socket, it will be easier to mock out the UDP socket layer when testing functionality at higher layers, and inject fake components when we want to emulate the network between a mvfst client and server. It will also be easier for us to have unit tests focused on testing interactions between the UDP socket implementation and this intermediate layer.
- **Improving receive path timestamping.** We only record a single timestamp per `NetworkData` at the moment, but (1) it is possible for a `NetworkData` to have multiple packets, each with their own timestamps, and (2) we should be able to record both userspace and socket timestamps.
Reviewed By: hanidamlaj
Differential Revision: D48715337
fbshipit-source-id: 26f3ef3c36e148dbae6d8e5a407da30205b8aaaf
Summary:
This diff deprecates `QuicClientTransport::onDataAvailable`, as this code path is no longer used in production:
- All production instances of `QuicClientTransport::shouldOnlyNotify()` currently return true, as `transportSettings.shouldRecvBatch` is set to true in production. Thus, `onDataAvailable` will never be called.
- `shouldRecvBatch` will be removed in a subsequent diff as it is no longer relevant on the client or server (despite being set sometimes for the server...).
--
This diff is part of a larger stack focused on the following:
- **Cleaning up client and server UDP packet receive paths while improving testability.** We currently have multiple receive paths for client and server. Capabilities vary significantly and there are few tests. For instance:
- The server receive path supports socket RX timestamps, abet incorrectly in that it does not store timestamp per packet. In comparison, the client receive path does not currently support socket RX timestamps, although the code in `QuicClientTransport::recvmsg` and `QuicClientTransport::recvmmsg` makes reference to socket RX timestamps, making it confusing to understand the capabilities available when tracing through the code. This complicates the tests in `QuicTypedTransportTests`, as we have to disable test logic that depends on socket RX timestamps for client tests.
- The client currently has three receive paths, and none of them are well tested.
- **Modularize and abstract components in the receive path.** This will make it easier to mock/fake the UDP socket and network layers.
- `QuicClientTransport` and `QuicServerTransport` currently contain UDP socket handling logic that operates over lower layer primitives such `cmsg` and `io_vec` (see `QuicClientTransport::recvmmsg` and `...::recvmsg` as examples).
- Because this UDP socket handling logic is inside of the mvfst transport implementations, it is difficult to test this logic in isolation and mock/fake the underlying socket and network layers. For instance, injecting a user space network emulator that operates at the socket layer would require faking `folly::AsyncUDPSocket`, which is non-trivial given that `AsyncUDPSocket` does not abstract away intricacies arising from the aforementioned lower layer primitives.
- By shifting this logic into an intermediate layer between the transport and the underlying UDP socket, it will be easier to mock out the UDP socket layer when testing functionality at higher layers, and inject fake components when we want to emulate the network between a mvfst client and server. It will also be easier for us to have unit tests focused on testing interactions between the UDP socket implementation and this intermediate layer.
- **Improving receive path timestamping.** We only record a single timestamp per `NetworkData` at the moment, but (1) it is possible for a `NetworkData` to have multiple packets, each with their own timestamps, and (2) we should be able to record both userspace and socket timestamps.
Reviewed By: hanidamlaj
Differential Revision: D48715162
fbshipit-source-id: ae63e0298d001bc90021767756d1023a12566cf2
Summary:
`QuicClientTransport::recvmsg` sets `msg.msg_name` to `nullptr` if we already have the remote address, but leaves `msg.msg_namelen` set to `kAddrLen`.
Linux seems to be ok with this combination — I assume without inspecting kernel sources that it ignores the length if the pointer is null. Windows is unhappy and breaks. Given the current way the code is written, the first packet gets received on Windows and subsequent packets fail.
I caught this while working on standardizing the receive path in D48715162; UTs caught this issue after I made it the default path. We should have had parameterized tests exploring all the paths before, but at least the simplification will resolve.
Reviewed By: mjoras, kvtsoy
Differential Revision: D48869381
fbshipit-source-id: 334875c6f3a974262a1778870caa96b0a39273fb
Summary:
This diff:
- Changes `NetworkDataSingle` to have `ReceivedPacket` instead of `Buf`, in line with earlier change to `NetworkData` in D48714615
--
This diff is part of a larger stack focused on the following:
- **Cleaning up client and server UDP packet receive paths while improving testability.** We currently have multiple receive paths for client and server. Capabilities vary significantly and there are few tests. For instance:
- The server receive path supports socket RX timestamps, abet incorrectly in that it does not store timestamp per packet. In comparison, the client receive path does not currently support socket RX timestamps, although the code in `QuicClientTransport::recvmsg` and `QuicClientTransport::recvmmsg` makes reference to socket RX timestamps, making it confusing to understand the capabilities available when tracing through the code. This complicates the tests in `QuicTypedTransportTests`, as we have to disable test logic that depends on socket RX timestamps for client tests.
- The client currently has three receive paths, and none of them are well tested.
- **Modularize and abstract components in the receive path.** This will make it easier to mock/fake the UDP socket and network layers.
- `QuicClientTransport` and `QuicServerTransport` currently contain UDP socket handling logic that operates over lower layer primitives such `cmsg` and `io_vec` (see `QuicClientTransport::recvmmsg` and `...::recvmsg` as examples).
- Because this UDP socket handling logic is inside of the mvfst transport implementations, it is difficult to test this logic in isolation and mock/fake the underlying socket and network layers. For instance, injecting a user space network emulator that operates at the socket layer would require faking `folly::AsyncUDPSocket`, which is non-trivial given that `AsyncUDPSocket` does not abstract away intricacies arising from the aforementioned lower layer primitives.
- By shifting this logic into an intermediate layer between the transport and the underlying UDP socket, it will be easier to mock out the UDP socket layer when testing functionality at higher layers, and inject fake components when we want to emulate the network between a mvfst client and server. It will also be easier for us to have unit tests focused on testing interactions between the UDP socket implementation and this intermediate layer.
- **Improving receive path timestamping.** We only record a single timestamp per `NetworkData` at the moment, but (1) it is possible for a `NetworkData` to have multiple packets, each with their own timestamps, and (2) we should be able to record both userspace and socket timestamps.
Reviewed By: mjoras
Differential Revision: D48714796
fbshipit-source-id: d96c2abc81e7c27a01bcd0dd552f274a0c1ede26
Summary: Update flow control settings names to reflect that these are indeed flow control
Reviewed By: jbeshay
Differential Revision: D48137685
fbshipit-source-id: a48372e21cdd529480e25785a9bd5de456427ef3
Summary:
change signature of both `ClientHandshake::getServerTransportParams` & `ClientTransportParametersExtension::getServerTransportParams`
from:
```
folly::Optional<ServerTransportParameters> getServerTransportParams()
```
to:
```
const folly::Optional<ServerTransportParameters>& getServerTransportParams()
```
previously this would `std::move(serverTransportParameters_)` after reading it, effectively making it possible to only read the value once.
Reviewed By: kvtsoy
Differential Revision: D48356933
fbshipit-source-id: deddd9101979c1ef30d540b67216dc9611ced713
Summary:
Create and use an actual wrapper around folly::EventBase.
Later an interface will be added that the wrapper will be implementing.
Reviewed By: jbeshay
Differential Revision: D45822401
fbshipit-source-id: 3b33f796c31043ec2881b753a9b60943bdf91f1d
Summary: We shouldn't have config in the codec types. Instead solve the plumbing problem more explicitly, and only define the config in one place.
Reviewed By: jbeshay
Differential Revision: D45881730
fbshipit-source-id: fab6c967a38172f16e57a8978b10460fd196902e
Summary:
- adds logic to drop retry packet if we've processed an initial packet
from RFC9000:
> After the client has received and processed an Initial or Retry packet from the server, it MUST discard any subsequent Retry packets that it receives.
Reviewed By: jbeshay, mjoras
Differential Revision: D45536695
fbshipit-source-id: c6f9532478ab249905683ca1fff6e692a978a0d2
Summary: This is a dumb shortcut. Just check whether it's happened after reading data and call close that way.
Reviewed By: kvtsoy
Differential Revision: D45205285
fbshipit-source-id: 57edafc50f5e5e9cdaf9ac7e46781b762acd30d8
Summary:
Somehow we never implemented this stat despite having it for ages.
It's relatively easy to do, we just need to check whether an entry was inserted to the IntervalSet we are already using for tracking what to ACK.
Note that this has the limitation that when the ACK interval set is cleared out (on ACK of ACK), we will no longer be able to detect duplicates. This is something we can tune later.
Reviewed By: kvtsoy
Differential Revision: D45131856
fbshipit-source-id: aad4e07e1a9cd5b2dc5dec60424f7cee15906c7e
Summary:
Adds a prewrite function in packet processors that can be used to set PreWrite Reuqests that will apply apply to the next write loop in the QuicSocket.
Currently, the PrewriteRequest only contains a list of cmsgs but it can be expanded when needed.
This replaces the setAdditionalCmsgs callback that was previously passed down directly to AsyncUDPSocket, allowing multiple processors to affect the additionalCmsgs sent to the AsyncUDPSocket.
Reviewed By: bschlinker
Differential Revision: D44233700
fbshipit-source-id: 799357ee5df89b2a526611bd83d0b4a9a13b71d5
Summary: This task addresses the duplicate transport parameter issue flagged by T82770285. (This task does not address the spurious transport parameter issue)
Reviewed By: hanidamlaj
Differential Revision: D43396535
fbshipit-source-id: 5729a6f96d678210c05c4060cdcce417f4ee9ec1
