Summary: this param is passed to transport then ignored
Reviewed By: avasylev
Differential Revision: D26133327
fbshipit-source-id: 459dd0132185513215ba034f213d4137d7b56ba1
Summary:
Given the large number of callbacks that are being triggered from the Observer
this change makes it possible to enable through a simple config, just the
subset of callbacks that a consumer is interested in receiving.
Observer and Socket Lifecycle callbacks are enabled by default, they are not
configurable.
Reviewed By: bschlinker
Differential Revision: D25879382
fbshipit-source-id: abe79ed92e958ddc96475c347f8ec7204400cdfa
Summary:
We were using the LifecycleObserver and InstrumentationObserver classes
separately, to generate and receive callbacks.
This change migrates both these to use the unified Observer callback class and
adjusts the unit tests.
Reviewed By: bschlinker
Differential Revision: D25845845
fbshipit-source-id: c489400f5d70bccadbcc1d957136c5ade36b65ff
Summary:
I think this should just work without the trailing `_E`. It was added
when we mixed up our own union based variant and boost::variant. Some compiler
flags didn't like that. Now we no longer have mixed up cases, this should be
fine
Reviewed By: lnicco
Differential Revision: D25589393
fbshipit-source-id: 6430dc20f8e81af0329d89e6990c16826da168b8
Summary: Adds another knob param to enforce udp payload size. This is basically a "canIgnorePathMTU" knob that client has.
Reviewed By: mjoras
Differential Revision: D24586165
fbshipit-source-id: befb265a24fae8f450f323cf2d652a8b448e698c
Summary: Blackhole detection has quite a lot false positives, we want to have a way to run d6d without it.
Reviewed By: mjoras
Differential Revision: D24584357
fbshipit-source-id: ab27655ec38d62fd6deffe41cb156de0c981cf6d
Summary: To scale well when we have more transport knob params, server can maintain a map from param id -> handler function. The handler function should avoid storing states / perform proper checking if it does. Most use cases should be covered by the "server_conn" param.
Reviewed By: mjoras
Differential Revision: D24584358
fbshipit-source-id: e45da50deb6ebd385b6a71e1b48f4650bc6ace91
Summary: Since the DCID is often empty for clients, this is otherwise not a very useful field.
Reviewed By: yangchi
Differential Revision: D23998639
fbshipit-source-id: b8949ca6913ed270e5ebd0a0c5335b224f817774
Summary: This was probably a premature optimization and introduces complexity for dubious gain. Additionally a sequence of losses could potentially cause multiple updates to be delayed.
Reviewed By: yangchi
Differential Revision: D23628058
fbshipit-source-id: d6cf70baec8c34f0209ea791dadc724795fe0c21
Summary:
First step towards d6d. Semantically we need to separate the old `udpSendPacketLen` into `peerMaxPacketSize` as well as `currPMTU`. The former is directly tied to the peer's max_packet_size transport parameter whereas the second is controlled by d6d. To get the actual udp mss, call `conn_->getUdpSendPacketLen()`, which will use the minimum of the two if d6d is enabled, otherwise it will fallback to use `peerMaxPacketSize` only.
During processClientInitialParams and processServerInitialParams, we no longer need to check whether `canIgnorePathMTU` is set because that logic is moved to `setUdpSendPacketLen`. If d6d is enabled, we set both `peerMaxPacketSize` and `currPMTU` to `packetSize` because receiving an initial packet of size x indicates both that the peer accepts x-sized packet and that the PMTU is at least x.
Many call sites and tests are changed.
Faebook:
For now, d6d is considered enabled if `canIgnorePathMTU==false` and `turnoffPMTUD==true`. Down the road, from semantic & practical POV at least one of them should be renamed to something like `enableD6D`, since enabling d6d implies turning off PMTUD and that we should not ignore PMTU. We can keep one for the sake of testing.
Reviewed By: mjoras
Differential Revision: D22049806
fbshipit-source-id: 7a9b30b7e2519c132101509be56a9e63b803dc93
Summary:
Adds support for timestamping on TX (TX byte events). This allows the application to determine when a byte that it previously wrote to the transport was put onto the wire.
Callbacks are processed within a new function `QuicTransportBase::processCallbacksAfterWriteData`, which is invoked by `writeSocketDataAndCatch`.
Reviewed By: mjoras
Differential Revision: D22008855
fbshipit-source-id: 99c1697cb74bb2387dbad231611be58f9392c99f
Summary: This diff creates a new `ServerCongestionControllerFactory` that will be used to create cc instances on the server only and thus can have different dependencies. At the moment this mirrors `DefaultCongestionControllerFactory`, but later in the stack when CCP is added, only the server cc factory will depend on (and be able to create) CCP instances, but the default one will not. This prevents any client builds from depending on CCP.
Reviewed By: yangchi
Differential Revision: D22139289
fbshipit-source-id: 2987f0234bc54ea6101ca0030b319b460571adeb
Summary:
The problem with Ping being a simple frame:
(1) All SimpleFrames are in the same scheduler. So sending ping means we may
also send other frames which can be problematic if we send in Initial or
Handshake space
(2) Ping isn't retranmisttable. But other Simple frames are. So we are
certainly setting this wrong when we send pure Ping packet today.
That being said, there are cases where we need to treat Ping as retransmittable.
One is when it comes to update ack state: If peer sends us Ping, we may want to
Ack early rather than late. so it makes sense to treat Ping as retransmittable.
Another place is insertion into OutstandingPackets list. When our API user sends
Ping, then also add a Ping timeout. Without adding pure Ping packets into OP list,
we won't be able to track the acks to our Pings.
Reviewed By: mjoras
Differential Revision: D21763935
fbshipit-source-id: a04e97b50cf4dd4e3974320a4d2cc16eda48eef9
Summary:
On loss timer, currently we knock all handshake packets out of the OP
list and resend everything. This means miss RTT sampling opportunities during
handshake if loss timer fires, and given our initial loss timer is likely not a
good fit for many networks, it probably fires a lot.
This diff keeps handshake packets in the OP list, and add packet cloning
support to handshake packets so we can clone them and send as probes.
With this, the handshake alarm is finally removed. PTO will take care of all
packet number space.
The diff also fixes a bug in the CloningScheduler where we missed cipher
overhead setting. That broke a few unit tests once we started to clone
handshake packets.
The writeProbingDataToSocket API is also changed to support passing a token to
it so when we clone Initial, token is added correctly. This is because during
packet cloning, we only clone frames. Headers are fresh built.
The diff also changed the cloning behavior when there is only one outstanding
packet. Currently we clone it twice and send two packets. There is no point of
doing that. Now when loss timer fires and when there is only one outstanding
packet, we only clone once.
The PacketEvent, which was an alias of PacketNumber, is now a real type that
has both PacketNumber and PacketNumberSpace to support cloning of handshake
packets. I think in the long term we should refactor PacketNumber itself into a
real type.
Reviewed By: mjoras
Differential Revision: D19863693
fbshipit-source-id: e427bb392021445a9388c15e7ea807852ddcbd08
Summary:
This implements the connection ID validation via transport parameters. Note we don't do anything with the retry transport parameter yet.
This will probably require further surgery to tests when we want the MVFST version to do this, but for now I'm punting on that test plumbing.
This retains support for h3-27.
Reviewed By: yangchi
Differential Revision: D22045631
fbshipit-source-id: e93841e734c0683655c751d808fd90b3b391eb3e
Summary: 0 is now a valid packet number, so we should make these optional. In cases where they are needed to construct packet builder, it should be safe to use 0 as default since it's only used for computing `twiceDistance` in PacketNumber.cpp.
Reviewed By: yangchi
Differential Revision: D21948454
fbshipit-source-id: af9fdc3e28ff85f1594296c4d436f24685a0acd6
Summary: There's no particular reason to wait for the drain period before removing state. By doing this a failed migration will immediately trigger the server to drop state, triggered a stateless reset signal to the client sooner.
Reviewed By: yangchi, lnicco
Differential Revision: D21643179
fbshipit-source-id: a60ca2c92935a3e6ba773d7936c25317733f7b97
Summary:
Becuase when we clone an existing packet, the logic inside the current
writetStreamFrameHeader is no longer correct.
Reviewed By: mjoras
Differential Revision: D21383828
fbshipit-source-id: 8e6bbb048eefd97ca7cf17b89edc2f395f274a73
Summary:
Now we won't have a zero PTO and we will properly clear out the outstanding packets.
Note that this cipher dropping is not what the draft prescribes, instead dropping both the initial and handshake ciphers when we know 1-rtt communication is functioning.
Reviewed By: yangchi
Differential Revision: D20388737
fbshipit-source-id: 0b89eb80c8faa796ab09eda3eaa10a00dcf7bae9
Summary:
This is a safer default than allowing limited on the source address not matching.
While here, also change the attemptEarlyData setting to false, since 0-rtt should be opt-in.
Reviewed By: yangchi, JunqiWang
Differential Revision: D21383402
fbshipit-source-id: b60fbbbe9438861eea894cb11ccb8bae2243a174
Summary:
Currently the packet builder contructor will encode the packet
builder. This is fine when the builder creates its own output buffer. If later
on we decides not to use this builder, or it fails to build packet, the buffer
will be thrown away. But once the builder uses a buffer provided by caller, and
will be reused, we can no longer just throw it away if we decide not to use
this builder. So we have to delay the header encoding until we know we will use
the builder.
This is still not enough to solve the case where we want to use this builder,
it builds, then it fails . For that, we will need to retreat the tail position
of the IOBuf.
Reviewed By: mjoras
Differential Revision: D21000658
fbshipit-source-id: 4d758b3e260463b17c870618ba68bd4b898a7d4c
Summary:
As it turns out, the extra indirection from storing a unique_ptr is not worse than the gain from using an `F14ValueMap` versus an `F14VectorMap`.
This reduces the `find` cost measurably in profiles, and doesn't appear to have any real negative effects otherwise.
Reviewed By: yangchi
Differential Revision: D20923854
fbshipit-source-id: a75c4649ea3dbf0e6c89ebfe0d31d082bbdc31fd
Summary: This will limit us to standard Ethernet MTU (1500) for now, but I think that is fine. This will allow us to experiment with packet size from the client more easily.
Reviewed By: yangchi
Differential Revision: D20709146
fbshipit-source-id: 608463de53d4520a257052491683263e14fc9682
Summary: Previously we would end up writing a non-application close when the application calls close(folly::none). This isn't correct, as those cases should be an application error with no error.
Reviewed By: afrind
Differential Revision: D20518529
fbshipit-source-id: fe069cccc32bd550fb3ec599694110955816993f
Summary:
When parsePacket returns anything other than RegularPacket, we already
log the Drop even inside the switch-case blocks before checking if
RegularPacket has been parsed. So the logging of Drop with PARSE_ERROR when the
CodecResult isn't RegularPacket is wrong. For example, right now when we
buffer 0-rtt data, we always log a Drop immediatly afterwards into QLog which
is incorrect.
Reviewed By: JunqiWang
Differential Revision: D20421934
fbshipit-source-id: d836700fd691645951d5e5b49b19cbcc1e5df51a
Summary:
This iterates the mvfst version to be semantically equivalent to draft-27, and leaves support for the old mvfst version.
The client will not yet be moved to draft-27 by default.
Reviewed By: lnicco
Differential Revision: D20182452
fbshipit-source-id: 1e11ad7296a6cd8d15ca5ed359d9ed82af79bb17
Summary: This is without cipher dropping, but the frame is parseable and the server will send it at the correct time.
Reviewed By: yangchi, lnicco
Differential Revision: D20235013
fbshipit-source-id: 696c11ec573a530b3ed9f4185a2f6847ee08819f
Summary:
This eliminatees some tech debt by completely removing the notion of version from the core transport parameters structure and the app token for zero rtt.
Note that for the draft-27 changes we will need to temporarily re-introduce it, but to a different layer (the extension encoding itself).
Reviewed By: JunqiWang
Differential Revision: D20073578
fbshipit-source-id: 2b55af621566bf1c20e21dd17251116de1788fa0
Summary: This implements the handshake done signal and also cipher dropping.
Reviewed By: yangchi
Differential Revision: D19584922
fbshipit-source-id: a98bec8f1076393b051ff65a2d8aae7d572b42f5
Summary:
our convention has always been to put the mock in the test dir under
the real class
Reviewed By: lnicco
Differential Revision: D20104476
fbshipit-source-id: 5215ffc9af7a6d7a5ac41109723a71f68f852af7
Summary: When we don't use NiceMock we end up with a ton of spam in failing tests for every callback that we didn't EXPECT. This makes failed test output extremely noisy.
Reviewed By: sharmafb
Differential Revision: D19977113
fbshipit-source-id: 1a083fba13308cd3f2859da364c8106e349775bb
Summary:
This diff:
1) introduces `EnumArray` - effectively an `std::array` indexed by an enum
2) changes loss times and `lastRetransmittablePacketSentTime` inside `LossState` to be an `EnumArray` indexed by `PacketNumberSpace`
3) makes the method `isHandshakeDone()` available for both client and server handshakes.
4) uses all those inputs to determine PTO timers in `earliestTimeAndSpace()`
Reviewed By: yangchi
Differential Revision: D19650864
fbshipit-source-id: d72e4a0cf61d2dcb76f0a7f4037c36a7c8156942
Summary:
Previously we stored an `IntervalSet` in each `WriteAckFrame`. We don't need to do this, as by the time we are writing an `ACK` the `IntervalSet` is complete. Instead of bothering with the `IntervalSet` operations, we can simply serialize it to a reverse-sorted `vector.`
Additionally this has some micro-optimizations for filling the ACK frame, with a new function for getting varint size.
Reviewed By: yangchi
Differential Revision: D19397728
fbshipit-source-id: ba6958fb36a4681edaa8394b1bcbbec3472e177d
Summary:
This moves the fizz specific part of the handshake into its own folder and library.
There is a bit of smurf naming going on as a result, not sure it is worth fixing or not at this stage. Maybe this code should be a in namespace named quic::fizz .
This should be doable with the client as well as soon as the key cache situation is figured out.
---
## Proxygen Canary
Reviewed By: yangchi
Differential Revision: D19290919
fbshipit-source-id: 48d7f7c70db42c65f7dffe3256805c268a481198
