lib/mbedtls
1
0
Fork 0
mirror of https://github.com/Mbed-TLS/mbedtls.git synced 2025-11-03 20:33:16 +03:00
Code Activity
Files
ab6ac91a0a714191cdccdf322b3a7f407c84634b
mbedtls/library/psa_crypto_core.h
Paul Elliott 15d7d43904 Pacify Clang 15 
Changes for interruptible {sign|verify} hash were not merged at the time of the
previous clang 15 /retval fixes, thus this fixes code added at that time.

Signed-off-by: Paul Elliott <paul.elliott@arm.com>
2023-02-27 17:25:57 +00:00

878 lines
37 KiB
C
Raw Blame History

/*
* PSA crypto core internal interfaces
*/
/*
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef PSA_CRYPTO_CORE_H
#define PSA_CRYPTO_CORE_H
#include "mbedtls/build_info.h"
#include "psa/crypto.h"
#include "psa/crypto_se_driver.h"
/** Constant-time buffer comparison
*
* \param[in] a Left-hand buffer for comparison.
* \param[in] b Right-hand buffer for comparison.
* \param n Amount of bytes to compare.
*
* \return 0 if the buffer contents are equal, non-zero otherwise
*/
static inline int mbedtls_psa_safer_memcmp(
const uint8_t *a, const uint8_t *b, size_t n)
{
size_t i;
unsigned char diff = 0;
for (i = 0; i < n; i++) {
diff |= a[i] ^ b[i];
}
return diff;
}
/** The data structure representing a key slot, containing key material
* and metadata for one key.
*/
typedef struct {
psa_core_key_attributes_t attr;
/*
* Number of locks on the key slot held by the library.
*
* This counter is incremented by one each time a library function
* retrieves through one of the dedicated internal API a pointer to the
* key slot.
*
* This counter is decremented by one each time a library function stops
* accessing the key slot and states it by calling the
* psa_unlock_key_slot() API.
*
* This counter is used to prevent resetting the key slot while the library
* may access it. For example, such control is needed in the following
* scenarios:
* . In case of key slot starvation, all key slots contain the description
* of a key, and the library asks for the description of a persistent
* key not present in the key slots, the key slots currently accessed by
* the library cannot be reclaimed to free a key slot to load the
* persistent key.
* . In case of a multi-threaded application where one thread asks to close
* or purge or destroy a key while it is in used by the library through
* another thread.
*/
size_t lock_count;
/* Dynamically allocated key data buffer.
* Format as specified in psa_export_key(). */
struct key_data {
uint8_t *data;
size_t bytes;
} key;
} psa_key_slot_t;
/* A mask of key attribute flags used only internally.
* Currently there aren't any. */
#define PSA_KA_MASK_INTERNAL_ONLY ( \
0)
/** Test whether a key slot is occupied.
*
* A key slot is occupied iff the key type is nonzero. This works because
* no valid key can have 0 as its key type.
*
* \param[in] slot The key slot to test.
*
* \return 1 if the slot is occupied, 0 otherwise.
*/
static inline int psa_is_key_slot_occupied(const psa_key_slot_t *slot)
{
return slot->attr.type != 0;
}
/** Test whether a key slot is locked.
*
* A key slot is locked iff its lock counter is strictly greater than 0.
*
* \param[in] slot The key slot to test.
*
* \return 1 if the slot is locked, 0 otherwise.
*/
static inline int psa_is_key_slot_locked(const psa_key_slot_t *slot)
{
return slot->lock_count > 0;
}
/** Retrieve flags from psa_key_slot_t::attr::core::flags.
*
* \param[in] slot The key slot to query.
* \param mask The mask of bits to extract.
*
* \return The key attribute flags in the given slot,
* bitwise-anded with \p mask.
*/
static inline uint16_t psa_key_slot_get_flags(const psa_key_slot_t *slot,
uint16_t mask)
{
return slot->attr.flags & mask;
}
/** Set flags in psa_key_slot_t::attr::core::flags.
*
* \param[in,out] slot The key slot to modify.
* \param mask The mask of bits to modify.
* \param value The new value of the selected bits.
*/
static inline void psa_key_slot_set_flags(psa_key_slot_t *slot,
uint16_t mask,
uint16_t value)
{
slot->attr.flags = ((~mask & slot->attr.flags) |
(mask & value));
}
/** Turn on flags in psa_key_slot_t::attr::core::flags.
*
* \param[in,out] slot The key slot to modify.
* \param mask The mask of bits to set.
*/
static inline void psa_key_slot_set_bits_in_flags(psa_key_slot_t *slot,
uint16_t mask)
{
slot->attr.flags |= mask;
}
/** Turn off flags in psa_key_slot_t::attr::core::flags.
*
* \param[in,out] slot The key slot to modify.
* \param mask The mask of bits to clear.
*/
static inline void psa_key_slot_clear_bits(psa_key_slot_t *slot,
uint16_t mask)
{
slot->attr.flags &= ~mask;
}
#if defined(MBEDTLS_PSA_CRYPTO_SE_C)
/** Get the SE slot number of a key from the key slot storing its description.
*
* \param[in] slot The key slot to query. This must be a key slot storing
* the description of a key of a dynamically registered
* secure element, otherwise the behaviour is undefined.
*/
static inline psa_key_slot_number_t psa_key_slot_get_slot_number(
const psa_key_slot_t *slot)
{
return *((psa_key_slot_number_t *) (slot->key.data));
}
#endif
/** Get the description of a key given its identifier and policy constraints
* and lock it.
*
* The key must have allow all the usage flags set in \p usage. If \p alg is
* nonzero, the key must allow operations with this algorithm. If \p alg is
* zero, the algorithm is not checked.
*
* In case of a persistent key, the function loads the description of the key
* into a key slot if not already done.
*
* On success, the returned key slot is locked. It is the responsibility of
* the caller to unlock the key slot when it does not access it anymore.
*/
psa_status_t psa_get_and_lock_key_slot_with_policy(mbedtls_svc_key_id_t key,
psa_key_slot_t **p_slot,
psa_key_usage_t usage,
psa_algorithm_t alg);
/** Completely wipe a slot in memory, including its policy.
*
* Persistent storage is not affected.
*
* \param[in,out] slot The key slot to wipe.
*
* \retval #PSA_SUCCESS
* Success. This includes the case of a key slot that was
* already fully wiped.
* \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
*/
psa_status_t psa_wipe_key_slot(psa_key_slot_t *slot);
/** Try to allocate a buffer to an empty key slot.
*
* \param[in,out] slot Key slot to attach buffer to.
* \param[in] buffer_length Requested size of the buffer.
*
* \retval #PSA_SUCCESS
* The buffer has been successfully allocated.
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* Not enough memory was available for allocation.
* \retval #PSA_ERROR_ALREADY_EXISTS
* Trying to allocate a buffer to a non-empty key slot.
*/
psa_status_t psa_allocate_buffer_to_slot(psa_key_slot_t *slot,
size_t buffer_length);
/** Wipe key data from a slot. Preserves metadata such as the policy. */
psa_status_t psa_remove_key_data_from_memory(psa_key_slot_t *slot);
/** Copy key data (in export format) into an empty key slot.
*
* This function assumes that the slot does not contain
* any key material yet. On failure, the slot content is unchanged.
*
* \param[in,out] slot Key slot to copy the key into.
* \param[in] data Buffer containing the key material.
* \param data_length Size of the key buffer.
*
* \retval #PSA_SUCCESS
* The key has been copied successfully.
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* Not enough memory was available for allocation of the
* copy buffer.
* \retval #PSA_ERROR_ALREADY_EXISTS
* There was other key material already present in the slot.
*/
psa_status_t psa_copy_key_material_into_slot(psa_key_slot_t *slot,
const uint8_t *data,
size_t data_length);
/** Convert an mbed TLS error code to a PSA error code
*
* \note This function is provided solely for the convenience of
* Mbed TLS and may be removed at any time without notice.
*
* \param ret An mbed TLS-thrown error code
*
* \return The corresponding PSA error code
*/
psa_status_t mbedtls_to_psa_error(int ret);
/** Import a key in binary format.
*
* \note The signature of this function is that of a PSA driver
* import_key entry point. This function behaves as an import_key
* entry point as defined in the PSA driver interface specification for
* transparent drivers.
*
* \param[in] attributes The attributes for the key to import.
* \param[in] data The buffer containing the key data in import
* format.
* \param[in] data_length Size of the \p data buffer in bytes.
* \param[out] key_buffer The buffer to contain the key data in output
* format upon successful return.
* \param[in] key_buffer_size Size of the \p key_buffer buffer in bytes. This
* size is greater or equal to \p data_length.
* \param[out] key_buffer_length The length of the data written in \p
* key_buffer in bytes.
* \param[out] bits The key size in number of bits.
*
* \retval #PSA_SUCCESS The key was imported successfully.
* \retval #PSA_ERROR_INVALID_ARGUMENT
* The key data is not correctly formatted.
* \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
* \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
*/
psa_status_t psa_import_key_into_slot(
const psa_key_attributes_t *attributes,
const uint8_t *data, size_t data_length,
uint8_t *key_buffer, size_t key_buffer_size,
size_t *key_buffer_length, size_t *bits);
/** Export a key in binary format
*
* \note The signature of this function is that of a PSA driver export_key
* entry point. This function behaves as an export_key entry point as
* defined in the PSA driver interface specification.
*
* \param[in] attributes The attributes for the key to export.
* \param[in] key_buffer Material or context of the key to export.
* \param[in] key_buffer_size Size of the \p key_buffer buffer in bytes.
* \param[out] data Buffer where the key data is to be written.
* \param[in] data_size Size of the \p data buffer in bytes.
* \param[out] data_length On success, the number of bytes written in
* \p data
*
* \retval #PSA_SUCCESS The key was exported successfully.
* \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
* \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
* \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
* \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
* \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
*/
psa_status_t psa_export_key_internal(
const psa_key_attributes_t *attributes,
const uint8_t *key_buffer, size_t key_buffer_size,
uint8_t *data, size_t data_size, size_t *data_length);
/** Export a public key or the public part of a key pair in binary format.
*
* \note The signature of this function is that of a PSA driver
* export_public_key entry point. This function behaves as an
* export_public_key entry point as defined in the PSA driver interface
* specification.
*
* \param[in] attributes The attributes for the key to export.
* \param[in] key_buffer Material or context of the key to export.
* \param[in] key_buffer_size Size of the \p key_buffer buffer in bytes.
* \param[out] data Buffer where the key data is to be written.
* \param[in] data_size Size of the \p data buffer in bytes.
* \param[out] data_length On success, the number of bytes written in
* \p data
*
* \retval #PSA_SUCCESS The public key was exported successfully.
* \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
* \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
* \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
* \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
* \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
*/
psa_status_t psa_export_public_key_internal(
const psa_key_attributes_t *attributes,
const uint8_t *key_buffer, size_t key_buffer_size,
uint8_t *data, size_t data_size, size_t *data_length);
/**
* \brief Generate a key.
*
* \note The signature of the function is that of a PSA driver generate_key
* entry point.
*
* \param[in] attributes The attributes for the key to generate.
* \param[out] key_buffer Buffer where the key data is to be written.
* \param[in] key_buffer_size Size of \p key_buffer in bytes.
* \param[out] key_buffer_length On success, the number of bytes written in
* \p key_buffer.
*
* \retval #PSA_SUCCESS
* The key was generated successfully.
* \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription
* \retval #PSA_ERROR_NOT_SUPPORTED
* Key size in bits or type not supported.
* \retval #PSA_ERROR_BUFFER_TOO_SMALL
* The size of \p key_buffer is too small.
*/
psa_status_t psa_generate_key_internal(const psa_key_attributes_t *attributes,
uint8_t *key_buffer,
size_t key_buffer_size,
size_t *key_buffer_length);
/** Sign a message with a private key. For hash-and-sign algorithms,
* this includes the hashing step.
*
* \note The signature of this function is that of a PSA driver
* sign_message entry point. This function behaves as a sign_message
* entry point as defined in the PSA driver interface specification for
* transparent drivers.
*
* \note This function will call the driver for psa_sign_hash
* and go through driver dispatch again.
*
* \param[in] attributes The attributes of the key to use for the
* operation.
* \param[in] key_buffer The buffer containing the key context.
* \param[in] key_buffer_size Size of the \p key_buffer buffer in bytes.
* \param[in] alg A signature algorithm that is compatible with
* the type of the key.
* \param[in] input The input message to sign.
* \param[in] input_length Size of the \p input buffer in bytes.
* \param[out] signature Buffer where the signature is to be written.
* \param[in] signature_size Size of the \p signature buffer in bytes.
* \param[out] signature_length On success, the number of bytes
* that make up the returned signature value.
*
* \retval #PSA_SUCCESS \emptydescription
* \retval #PSA_ERROR_BUFFER_TOO_SMALL
* The size of the \p signature buffer is too small. You can
* determine a sufficient buffer size by calling
* #PSA_SIGN_OUTPUT_SIZE(\c key_type, \c key_bits, \p alg)
* where \c key_type and \c key_bits are the type and bit-size
* respectively of the key.
* \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
* \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
* \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
* \retval #PSA_ERROR_INSUFFICIENT_ENTROPY \emptydescription
*/
psa_status_t psa_sign_message_builtin(
const psa_key_attributes_t *attributes,
const uint8_t *key_buffer, size_t key_buffer_size,
psa_algorithm_t alg, const uint8_t *input, size_t input_length,
uint8_t *signature, size_t signature_size, size_t *signature_length);
/** Verify the signature of a message with a public key, using
* a hash-and-sign verification algorithm.
*
* \note The signature of this function is that of a PSA driver
* verify_message entry point. This function behaves as a verify_message
* entry point as defined in the PSA driver interface specification for
* transparent drivers.
*
* \note This function will call the driver for psa_verify_hash
* and go through driver dispatch again.
*
* \param[in] attributes The attributes of the key to use for the
* operation.
* \param[in] key_buffer The buffer containing the key context.
* \param[in] key_buffer_size Size of the \p key_buffer buffer in bytes.
* \param[in] alg A signature algorithm that is compatible with
* the type of the key.
* \param[in] input The message whose signature is to be verified.
* \param[in] input_length Size of the \p input buffer in bytes.
* \param[in] signature Buffer containing the signature to verify.
* \param[in] signature_length Size of the \p signature buffer in bytes.
*
* \retval #PSA_SUCCESS
* The signature is valid.
* \retval #PSA_ERROR_INVALID_SIGNATURE
* The calculation was performed successfully, but the passed
* signature is not a valid signature.
* \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
* \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
*/
psa_status_t psa_verify_message_builtin(
const psa_key_attributes_t *attributes,
const uint8_t *key_buffer, size_t key_buffer_size,
psa_algorithm_t alg, const uint8_t *input, size_t input_length,
const uint8_t *signature, size_t signature_length);
/** Sign an already-calculated hash with a private key.
*
* \note The signature of this function is that of a PSA driver
* sign_hash entry point. This function behaves as a sign_hash
* entry point as defined in the PSA driver interface specification for
* transparent drivers.
*
* \param[in] attributes The attributes of the key to use for the
* operation.
* \param[in] key_buffer The buffer containing the key context.
* \param[in] key_buffer_size Size of the \p key_buffer buffer in bytes.
* \param[in] alg A signature algorithm that is compatible with
* the type of the key.
* \param[in] hash The hash or message to sign.
* \param[in] hash_length Size of the \p hash buffer in bytes.
* \param[out] signature Buffer where the signature is to be written.
* \param[in] signature_size Size of the \p signature buffer in bytes.
* \param[out] signature_length On success, the number of bytes
* that make up the returned signature value.
*
* \retval #PSA_SUCCESS \emptydescription
* \retval #PSA_ERROR_BUFFER_TOO_SMALL
* The size of the \p signature buffer is too small. You can
* determine a sufficient buffer size by calling
* #PSA_SIGN_OUTPUT_SIZE(\c key_type, \c key_bits, \p alg)
* where \c key_type and \c key_bits are the type and bit-size
* respectively of the key.
* \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
* \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
* \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
* \retval #PSA_ERROR_INSUFFICIENT_ENTROPY \emptydescription
*/
psa_status_t psa_sign_hash_builtin(
const psa_key_attributes_t *attributes,
const uint8_t *key_buffer, size_t key_buffer_size,
psa_algorithm_t alg, const uint8_t *hash, size_t hash_length,
uint8_t *signature, size_t signature_size, size_t *signature_length);
/**
* \brief Verify the signature a hash or short message using a public key.
*
* \note The signature of this function is that of a PSA driver
* verify_hash entry point. This function behaves as a verify_hash
* entry point as defined in the PSA driver interface specification for
* transparent drivers.
*
* \param[in] attributes The attributes of the key to use for the
* operation.
* \param[in] key_buffer The buffer containing the key context.
* \param[in] key_buffer_size Size of the \p key_buffer buffer in bytes.
* \param[in] alg A signature algorithm that is compatible with
* the type of the key.
* \param[in] hash The hash or message whose signature is to be
* verified.
* \param[in] hash_length Size of the \p hash buffer in bytes.
* \param[in] signature Buffer containing the signature to verify.
* \param[in] signature_length Size of the \p signature buffer in bytes.
*
* \retval #PSA_SUCCESS
* The signature is valid.
* \retval #PSA_ERROR_INVALID_SIGNATURE
* The calculation was performed successfully, but the passed
* signature is not a valid signature.
* \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
* \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
*/
psa_status_t psa_verify_hash_builtin(
const psa_key_attributes_t *attributes,
const uint8_t *key_buffer, size_t key_buffer_size,
psa_algorithm_t alg, const uint8_t *hash, size_t hash_length,
const uint8_t *signature, size_t signature_length);
/**
* \brief Validate the key bit size for unstructured keys.
*
* \note Check that the bit size is acceptable for a given key type for
* unstructured keys.
*
* \param[in] type The key type
* \param[in] bits The number of bits of the key
*
* \retval #PSA_SUCCESS
* The key type and size are valid.
* \retval #PSA_ERROR_INVALID_ARGUMENT
* The size in bits of the key is not valid.
* \retval #PSA_ERROR_NOT_SUPPORTED
* The type and/or the size in bits of the key or the combination of
* the two is not supported.
*/
psa_status_t psa_validate_unstructured_key_bit_size(psa_key_type_t type,
size_t bits);
/** Perform a key agreement and return the raw shared secret, using
built-in raw key agreement functions.
*
* \note The signature of this function is that of a PSA driver
* key_agreement entry point. This function behaves as a key_agreement
* entry point as defined in the PSA driver interface specification for
* transparent drivers.
*
* \param[in] attributes The attributes of the key to use for the
* operation.
* \param[in] key_buffer The buffer containing the private key
* context.
* \param[in] key_buffer_size Size of the \p key_buffer buffer in
* bytes.
* \param[in] alg A key agreement algorithm that is
* compatible with the type of the key.
* \param[in] peer_key The buffer containing the key context
* of the peer's public key.
* \param[in] peer_key_length Size of the \p peer_key buffer in
* bytes.
* \param[out] shared_secret The buffer to which the shared secret
* is to be written.
* \param[in] shared_secret_size Size of the \p shared_secret buffer in
* bytes.
* \param[out] shared_secret_length On success, the number of bytes that make
* up the returned shared secret.
* \retval #PSA_SUCCESS
* Success. Shared secret successfully calculated.
* \retval #PSA_ERROR_INVALID_HANDLE \emptydescription
* \retval #PSA_ERROR_NOT_PERMITTED \emptydescription
* \retval #PSA_ERROR_INVALID_ARGUMENT
* \p alg is not a key agreement algorithm, or
* \p private_key is not compatible with \p alg,
* or \p peer_key is not valid for \p alg or not compatible with
* \p private_key.
* \retval #PSA_ERROR_BUFFER_TOO_SMALL
* \p shared_secret_size is too small
* \retval #PSA_ERROR_NOT_SUPPORTED
* \p alg is not a supported key agreement algorithm.
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
* \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
* \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
* \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
* \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
* \retval #PSA_ERROR_BAD_STATE \emptydescription
*/
psa_status_t psa_key_agreement_raw_builtin(
const psa_key_attributes_t *attributes,
const uint8_t *key_buffer,
size_t key_buffer_size,
psa_algorithm_t alg,
const uint8_t *peer_key,
size_t peer_key_length,
uint8_t *shared_secret,
size_t shared_secret_size,
size_t *shared_secret_length);
/**
* \brief Set the maximum number of ops allowed to be executed by an
* interruptible function in a single call.
*
* \note The signature of this function is that of a PSA driver
* interruptible_set_max_ops entry point. This function behaves as an
* interruptible_set_max_ops entry point as defined in the PSA driver
* interface specification for transparent drivers.
*
* \param[in] max_ops The maximum number of ops to be executed in a
* single call, this can be a number from 0 to
* #PSA_INTERRUPTIBLE_MAX_OPS_UNLIMITED, where 0
* is obviously the least amount of work done per
* call.
*/
void mbedtls_psa_interruptible_set_max_ops(uint32_t max_ops);
/**
* \brief Get the maximum number of ops allowed to be executed by an
* interruptible function in a single call.
*
* \note The signature of this function is that of a PSA driver
* interruptible_get_max_ops entry point. This function behaves as an
* interruptible_get_max_ops entry point as defined in the PSA driver
* interface specification for transparent drivers.
*
* \return Maximum number of ops allowed to be executed
* by an interruptible function in a single call.
*/
uint32_t mbedtls_psa_interruptible_get_max_ops(void);
/**
* \brief Get the number of ops that a hash signing operation has taken for the
* previous call. If no call or work has taken place, this will return
* zero.
*
* \note The signature of this function is that of a PSA driver
* sign_hash_get_num_ops entry point. This function behaves as an
* sign_hash_get_num_ops entry point as defined in the PSA driver
* interface specification for transparent drivers.
*
* \param operation The \c
* mbedtls_psa_sign_hash_interruptible_operation_t
* to use. This must be initialized first.
*
* \return Number of ops that were completed
* in the last call to \c
* mbedtls_psa_sign_hash_complete().
*/
uint32_t mbedtls_psa_sign_hash_get_num_ops(
const mbedtls_psa_sign_hash_interruptible_operation_t *operation);
/**
* \brief Get the number of ops that a hash verification operation has taken for
* the previous call. If no call or work has taken place, this will
* return zero.
*
* \note The signature of this function is that of a PSA driver
* verify_hash_get_num_ops entry point. This function behaves as an
* verify_hash_get_num_ops entry point as defined in the PSA driver
* interface specification for transparent drivers.
*
* \param operation The \c
* mbedtls_psa_verify_hash_interruptible_operation_t
* to use. This must be initialized first.
*
* \return Number of ops that were completed
* in the last call to \c
* mbedtls_psa_verify_hash_complete().
*/
uint32_t mbedtls_psa_verify_hash_get_num_ops(
const mbedtls_psa_verify_hash_interruptible_operation_t *operation);
/**
* \brief Start signing a hash or short message with a private key, in an
* interruptible manner.
*
* \note The signature of this function is that of a PSA driver
* sign_hash_start entry point. This function behaves as a
* sign_hash_start entry point as defined in the PSA driver interface
* specification for transparent drivers.
*
* \param[in] operation The \c
* mbedtls_psa_sign_hash_interruptible_operation_t
* to use. This must be initialized first.
* \param[in] attributes The attributes of the key to use for the
* operation.
* \param[in] key_buffer The buffer containing the key context.
* \param[in] key_buffer_size Size of the \p key_buffer buffer in bytes.
* \param[in] alg A signature algorithm that is compatible with
* the type of the key.
* \param[in] hash The hash or message to sign.
* \param hash_length Size of the \p hash buffer in bytes.
*
* \retval #PSA_SUCCESS
* The operation started successfully - call \c psa_sign_hash_complete()
* with the same context to complete the operation
* \retval #PSA_ERROR_INVALID_ARGUMENT
* An unsupported, incorrectly formatted or incorrect type of key was
* used.
* \retval #PSA_ERROR_NOT_SUPPORTED Either no internal interruptible operations
* are currently supported, or the key type is currently unsupported.
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* There was insufficient memory to load the key representation.
*/
psa_status_t mbedtls_psa_sign_hash_start(
mbedtls_psa_sign_hash_interruptible_operation_t *operation,
const psa_key_attributes_t *attributes, const uint8_t *key_buffer,
size_t key_buffer_size, psa_algorithm_t alg,
const uint8_t *hash, size_t hash_length);
/**
* \brief Continue and eventually complete the action of signing a hash or
* short message with a private key, in an interruptible manner.
*
* \note The signature of this function is that of a PSA driver
* sign_hash_complete entry point. This function behaves as a
* sign_hash_complete entry point as defined in the PSA driver interface
* specification for transparent drivers.
*
* \param[in] operation The \c
* mbedtls_psa_sign_hash_interruptible_operation_t
* to use. This must be initialized first.
*
* \param[out] signature Buffer where the signature is to be written.
* \param signature_size Size of the \p signature buffer in bytes. This
* must be appropriate for the selected
* algorithm and key.
* \param[out] signature_length On success, the number of bytes that make up
* the returned signature value.
*
* \retval #PSA_SUCCESS
* Operation completed successfully
*
* \retval #PSA_OPERATION_INCOMPLETE
* Operation was interrupted due to the setting of \c
* psa_interruptible_set_max_ops(), there is still work to be done,
* please call this function again with the same operation object.
*
* \retval #PSA_ERROR_BUFFER_TOO_SMALL
* The size of the \p signature buffer is too small. You can
* determine a sufficient buffer size by calling
* #PSA_SIGN_OUTPUT_SIZE(\c key_type, \c key_bits, \p alg)
* where \c key_type and \c key_bits are the type and bit-size
* respectively of \p key.
*
* \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
* \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
* \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
* \retval #PSA_ERROR_INSUFFICIENT_ENTROPY \emptydescription
*/
psa_status_t mbedtls_psa_sign_hash_complete(
mbedtls_psa_sign_hash_interruptible_operation_t *operation,
uint8_t *signature, size_t signature_size,
size_t *signature_length);
/**
* \brief Abort a sign hash operation.
*
* \note The signature of this function is that of a PSA driver sign_hash_abort
* entry point. This function behaves as a sign_hash_abort entry point as
* defined in the PSA driver interface specification for transparent
* drivers.
*
* \param[in] operation The \c
* mbedtls_psa_sign_hash_interruptible_operation_t
* to abort.
*
* \retval #PSA_SUCCESS
* The operation was aborted successfully.
*/
psa_status_t mbedtls_psa_sign_hash_abort(
mbedtls_psa_sign_hash_interruptible_operation_t *operation);
/**
* \brief Start reading and verifying a hash or short message, in an
* interruptible manner.
*
* \note The signature of this function is that of a PSA driver
* verify_hash_start entry point. This function behaves as a
* verify_hash_start entry point as defined in the PSA driver interface
* specification for transparent drivers.
*
* \param[in] operation The \c
* mbedtls_psa_verify_hash_interruptible_operation_t
* to use. This must be initialized first.
* \param[in] attributes The attributes of the key to use for the
* operation.
* \param[in] key_buffer The buffer containing the key context.
* \param[in] key_buffer_size Size of the \p key_buffer buffer in bytes.
* \param[in] alg A signature algorithm that is compatible with
* the type of the key.
* \param[in] hash The hash whose signature is to be verified.
* \param hash_length Size of the \p hash buffer in bytes.
* \param[in] signature Buffer containing the signature to verify.
* \param signature_length Size of the \p signature buffer in bytes.
*
* \retval #PSA_SUCCESS
* The operation started successfully - call \c psa_sign_hash_complete()
* with the same context to complete the operation
* \retval #PSA_ERROR_INVALID_ARGUMENT
* An unsupported or incorrect type of key was used.
* \retval #PSA_ERROR_NOT_SUPPORTED
* Either no internal interruptible operations are currently supported,
* or the key type is currently unsupported.
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* There was insufficient memory either to load the key representation,
* or to prepare the operation.
*/
psa_status_t mbedtls_psa_verify_hash_start(
mbedtls_psa_verify_hash_interruptible_operation_t *operation,
const psa_key_attributes_t *attributes,
const uint8_t *key_buffer, size_t key_buffer_size,
psa_algorithm_t alg,
const uint8_t *hash, size_t hash_length,
const uint8_t *signature, size_t signature_length);
/**
* \brief Continue and eventually complete the action of signing a hash or
* short message with a private key, in an interruptible manner.
*
* \note The signature of this function is that of a PSA driver
* sign_hash_complete entry point. This function behaves as a
* sign_hash_complete entry point as defined in the PSA driver interface
* specification for transparent drivers.
*
* \param[in] operation The \c
* mbedtls_psa_sign_hash_interruptible_operation_t
* to use. This must be initialized first.
*
* \retval #PSA_SUCCESS
* Operation completed successfully, and the passed signature is valid.
*
* \retval #PSA_OPERATION_INCOMPLETE
* Operation was interrupted due to the setting of \c
* psa_interruptible_set_max_ops(), there is still work to be done,
* please call this function again with the same operation object.
*
* \retval #PSA_ERROR_INVALID_SIGNATURE
* The calculation was performed successfully, but the passed
* signature is not a valid signature.
*
* \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
* \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
*/
psa_status_t mbedtls_psa_verify_hash_complete(
mbedtls_psa_verify_hash_interruptible_operation_t *operation);
/**
* \brief Abort a verify signed hash operation.
*
* \note The signature of this function is that of a PSA driver
* verify_hash_abort entry point. This function behaves as a
* verify_hash_abort entry point as defined in the PSA driver interface
* specification for transparent drivers.
*
* \param[in] operation The \c
* mbedtls_psa_verify_hash_interruptible_operation_t
* to abort.
*
* \retval #PSA_SUCCESS
* The operation was aborted successfully.
*/
psa_status_t mbedtls_psa_verify_hash_abort(
mbedtls_psa_verify_hash_interruptible_operation_t *operation);
#endif /* PSA_CRYPTO_CORE_H */
View Git Blame Copy Permalink