lib/mbedtls
1
0
Fork 0
mirror of https://github.com/Mbed-TLS/mbedtls.git synced 2025-10-30 10:45:34 +03:00
Code Activity
Files
328b9e8bca359a40e814e20ad00050986c151f9c
mbedtls/tests/scripts/components.sh
Minos Galanakis 328b9e8bca Extract compliance-components into a separate file. 
Signed-off-by: David Horstmann <david.horstmann@arm.com>
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Signed-off-by: Minos Galanakis <minos.galanakis@arm.com>
2024-08-01 18:44:47 +01:00

4370 lines
167 KiB
Bash
Raw Blame History

# components.sh
#
# Copyright The Mbed TLS Contributors
# SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
# This file contains the test components that are executed by all.sh
# The functions below are named as follows:
# * component_XXX: independent components. They can be run in any order.
# * component_check_XXX: quick tests that aren't worth parallelizing.
# * component_build_XXX: build things but don't run them.
# * component_test_XXX: build and test.
# * component_release_XXX: tests that the CI should skip during PR testing.
# * support_XXX: if support_XXX exists and returns false then
# component_XXX is not run by default.
# Each component must start by invoking `msg` with a short informative message.
#
# Warning: due to the way bash detects errors, the failure of a command
# inside 'if' or '!' is not detected. Use the 'not' function instead of '!'.
#
# Each component is executed in a separate shell process. The component
# fails if any command in it returns a non-zero status.
#
# The framework in all.sh performs some cleanup tasks after each component.
# This means that components can assume that the working directory is in a
# cleaned-up state, and don't need to perform the cleanup themselves.
# * Run `make clean`.
# * Restore `include/mbedtls/mbedtls_config.h` from a backup made before running
# the component.
# * Check out `Makefile`, `library/Makefile`, `programs/Makefile`,
# `tests/Makefile` and `programs/fuzz/Makefile` from git.
# This cleans up after an in-tree use of CMake.
#
# The tests are roughly in order from fastest to slowest. This doesn't
# have to be exact, but in general you should add slower tests towards
# the end and fast checks near the beginning.
################################################################
#### Build and test many configurations and targets
################################################################
# Helper function for controlling (start & stop) the psasim server.
helper_psasim_server() {
OPERATION=$1
if [ "$OPERATION" == "start" ]; then
(
cd tests
msg "start server in tests"
psa-client-server/psasim/test/start_server.sh
msg "start server in tf-psa-crypto/tests"
cd ../tf-psa-crypto/tests
../../tests/psa-client-server/psasim/test/start_server.sh
)
else
(
msg "terminate servers and cleanup"
tests/psa-client-server/psasim//test/kill_servers.sh
# Remove temporary files and logs
cd tests
rm -f psa_notify_*
rm -f psa_service_*
rm -f psa_server.log
cd ../tf-psa-crypto/tests
rm -f psa_notify_*
rm -f psa_service_*
rm -f psa_server.log
)
fi
}
################################################################
#### Build and test many configurations and targets
################################################################
component_test_default_out_of_box () {
msg "build: make, default config (out-of-box)" # ~1min
make
# Disable fancy stuff
unset MBEDTLS_TEST_OUTCOME_FILE
msg "test: main suites make, default config (out-of-box)" # ~10s
make test
msg "selftest: make, default config (out-of-box)" # ~10s
programs/test/selftest
msg "program demos: make, default config (out-of-box)" # ~10s
tests/scripts/run_demos.py
}
component_test_default_cmake_gcc_asan () {
msg "build: cmake, gcc, ASan" # ~ 1 min 50s
CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: main suites (inc. selftests) (ASan build)" # ~ 50s
make test
msg "program demos (ASan build)" # ~10s
tests/scripts/run_demos.py
msg "test: selftest (ASan build)" # ~ 10s
programs/test/selftest
msg "test: metatests (GCC, ASan build)"
tests/scripts/run-metatests.sh any asan poison
msg "test: ssl-opt.sh (ASan build)" # ~ 1 min
tests/ssl-opt.sh
msg "test: compat.sh (ASan build)" # ~ 6 min
tests/compat.sh
msg "test: context-info.sh (ASan build)" # ~ 15 sec
tests/context-info.sh
}
component_test_default_cmake_gcc_asan_new_bignum () {
msg "build: cmake, gcc, ASan" # ~ 1 min 50s
scripts/config.py set MBEDTLS_ECP_WITH_MPI_UINT
CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: main suites (inc. selftests) (ASan build)" # ~ 50s
make test
msg "test: selftest (ASan build)" # ~ 10s
programs/test/selftest
msg "test: ssl-opt.sh (ASan build)" # ~ 1 min
tests/ssl-opt.sh
msg "test: compat.sh (ASan build)" # ~ 6 min
tests/compat.sh
msg "test: context-info.sh (ASan build)" # ~ 15 sec
tests/context-info.sh
}
component_test_full_cmake_gcc_asan () {
msg "build: full config, cmake, gcc, ASan"
scripts/config.py full
CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: main suites (inc. selftests) (full config, ASan build)"
make test
msg "test: selftest (full config, ASan build)" # ~ 10s
programs/test/selftest
msg "test: ssl-opt.sh (full config, ASan build)"
tests/ssl-opt.sh
# Note: the next two invocations cover all compat.sh test cases.
# We should use the same here and in basic-build-test.sh.
msg "test: compat.sh: default version (full config, ASan build)"
tests/compat.sh -e 'ARIA\|CHACHA'
msg "test: compat.sh: next: ARIA, Chacha (full config, ASan build)"
env OPENSSL="$OPENSSL_NEXT" tests/compat.sh -e '^$' -f 'ARIA\|CHACHA'
msg "test: context-info.sh (full config, ASan build)" # ~ 15 sec
tests/context-info.sh
}
component_test_full_cmake_gcc_asan_new_bignum () {
msg "build: full config, cmake, gcc, ASan"
scripts/config.py full
scripts/config.py set MBEDTLS_ECP_WITH_MPI_UINT
CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: main suites (inc. selftests) (full config, new bignum, ASan)"
make test
msg "test: selftest (full config, new bignum, ASan)" # ~ 10s
programs/test/selftest
msg "test: ssl-opt.sh (full config, new bignum, ASan)"
tests/ssl-opt.sh
# Note: the next two invocations cover all compat.sh test cases.
# We should use the same here and in basic-build-test.sh.
msg "test: compat.sh: default version (full config, new bignum, ASan)"
tests/compat.sh -e 'ARIA\|CHACHA'
msg "test: compat.sh: next: ARIA, Chacha (full config, new bignum, ASan)"
env OPENSSL="$OPENSSL_NEXT" tests/compat.sh -e '^$' -f 'ARIA\|CHACHA'
msg "test: context-info.sh (full config, new bignum, ASan)" # ~ 15 sec
tests/context-info.sh
}
component_test_psa_crypto_key_id_encodes_owner () {
msg "build: full config + PSA_CRYPTO_KEY_ID_ENCODES_OWNER, cmake, gcc, ASan"
scripts/config.py full
scripts/config.py set MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER
CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: full config - USE_PSA_CRYPTO + PSA_CRYPTO_KEY_ID_ENCODES_OWNER, cmake, gcc, ASan"
make test
}
component_test_psa_assume_exclusive_buffers () {
msg "build: full config + MBEDTLS_PSA_ASSUME_EXCLUSIVE_BUFFERS, cmake, gcc, ASan"
scripts/config.py full
scripts/config.py set MBEDTLS_PSA_ASSUME_EXCLUSIVE_BUFFERS
CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: full config + MBEDTLS_PSA_ASSUME_EXCLUSIVE_BUFFERS, cmake, gcc, ASan"
make test
}
# check_renamed_symbols HEADER LIB
# Check that if HEADER contains '#define MACRO ...' then MACRO is not a symbol
# name is LIB.
check_renamed_symbols () {
! nm "$2" | sed 's/.* //' |
grep -x -F "$(sed -n 's/^ *# *define *\([A-Z_a-z][0-9A-Z_a-z]*\)..*/\1/p' "$1")"
}
component_build_psa_crypto_spm () {
msg "build: full config + PSA_CRYPTO_KEY_ID_ENCODES_OWNER + PSA_CRYPTO_SPM, make, gcc"
scripts/config.py full
scripts/config.py unset MBEDTLS_PSA_CRYPTO_BUILTIN_KEYS
scripts/config.py set MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER
scripts/config.py set MBEDTLS_PSA_CRYPTO_SPM
# We can only compile, not link, since our test and sample programs
# aren't equipped for the modified names used when MBEDTLS_PSA_CRYPTO_SPM
# is active.
make CC=gcc CFLAGS='-Werror -Wall -Wextra -I../tests/include/spe' lib
# Check that if a symbol is renamed by crypto_spe.h, the non-renamed
# version is not present.
echo "Checking for renamed symbols in the library"
check_renamed_symbols tests/include/spe/crypto_spe.h library/libmbedcrypto.a
}
component_test_no_rsa_key_pair_generation() {
msg "build: default config minus PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_GENERATE"
scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG
scripts/config.py unset MBEDTLS_GENPRIME
scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_GENERATE
make
msg "test: default config minus PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_GENERATE"
make test
}
component_test_ref_configs () {
msg "test/build: ref-configs (ASan build)" # ~ 6 min 20s
# test-ref-configs works by overwriting mbedtls_config.h; this makes cmake
# want to re-generate generated files that depend on it, quite correctly.
# However this doesn't work as the generation script expects a specific
# format for mbedtls_config.h, which the other files don't follow. Also,
# cmake can't know this, but re-generation is actually not necessary as
# the generated files only depend on the list of available options, not
# whether they're on or off. So, disable cmake's (over-sensitive here)
# dependency resolution for generated files and just rely on them being
# present (thanks to pre_generate_files) by turning GEN_FILES off.
CC=$ASAN_CC cmake -D GEN_FILES=Off -D CMAKE_BUILD_TYPE:String=Asan .
tests/scripts/test-ref-configs.pl config-tfm.h
}
component_test_no_renegotiation () {
msg "build: Default + !MBEDTLS_SSL_RENEGOTIATION (ASan build)" # ~ 6 min
scripts/config.py unset MBEDTLS_SSL_RENEGOTIATION
CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: !MBEDTLS_SSL_RENEGOTIATION - main suites (inc. selftests) (ASan build)" # ~ 50s
make test
msg "test: !MBEDTLS_SSL_RENEGOTIATION - ssl-opt.sh (ASan build)" # ~ 6 min
tests/ssl-opt.sh
}
component_test_no_pem_no_fs () {
msg "build: Default + !MBEDTLS_PEM_PARSE_C + !MBEDTLS_FS_IO (ASan build)"
scripts/config.py unset MBEDTLS_PEM_PARSE_C
scripts/config.py unset MBEDTLS_FS_IO
scripts/config.py unset MBEDTLS_PSA_ITS_FILE_C # requires a filesystem
scripts/config.py unset MBEDTLS_PSA_CRYPTO_STORAGE_C # requires PSA ITS
CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: !MBEDTLS_PEM_PARSE_C !MBEDTLS_FS_IO - main suites (inc. selftests) (ASan build)" # ~ 50s
make test
msg "test: !MBEDTLS_PEM_PARSE_C !MBEDTLS_FS_IO - ssl-opt.sh (ASan build)" # ~ 6 min
tests/ssl-opt.sh
}
component_test_rsa_no_crt () {
msg "build: Default + RSA_NO_CRT (ASan build)" # ~ 6 min
scripts/config.py set MBEDTLS_RSA_NO_CRT
CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: RSA_NO_CRT - main suites (inc. selftests) (ASan build)" # ~ 50s
make test
msg "test: RSA_NO_CRT - RSA-related part of ssl-opt.sh (ASan build)" # ~ 5s
tests/ssl-opt.sh -f RSA
msg "test: RSA_NO_CRT - RSA-related part of compat.sh (ASan build)" # ~ 3 min
tests/compat.sh -t RSA
msg "test: RSA_NO_CRT - RSA-related part of context-info.sh (ASan build)" # ~ 15 sec
tests/context-info.sh
}
component_test_no_ctr_drbg_classic () {
msg "build: Full minus CTR_DRBG, classic crypto in TLS"
scripts/config.py full
scripts/config.py unset MBEDTLS_CTR_DRBG_C
scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: Full minus CTR_DRBG, classic crypto - main suites"
make test
# In this configuration, the TLS test programs use HMAC_DRBG.
# The SSL tests are slow, so run a small subset, just enough to get
# confidence that the SSL code copes with HMAC_DRBG.
msg "test: Full minus CTR_DRBG, classic crypto - ssl-opt.sh (subset)"
tests/ssl-opt.sh -f 'Default\|SSL async private.*delay=\|tickets enabled on server'
msg "test: Full minus CTR_DRBG, classic crypto - compat.sh (subset)"
tests/compat.sh -m tls12 -t 'ECDSA PSK' -V NO -p OpenSSL
}
component_test_no_ctr_drbg_use_psa () {
msg "build: Full minus CTR_DRBG, PSA crypto in TLS"
scripts/config.py full
scripts/config.py unset MBEDTLS_CTR_DRBG_C
scripts/config.py set MBEDTLS_USE_PSA_CRYPTO
CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: Full minus CTR_DRBG, USE_PSA_CRYPTO - main suites"
make test
# In this configuration, the TLS test programs use HMAC_DRBG.
# The SSL tests are slow, so run a small subset, just enough to get
# confidence that the SSL code copes with HMAC_DRBG.
msg "test: Full minus CTR_DRBG, USE_PSA_CRYPTO - ssl-opt.sh (subset)"
tests/ssl-opt.sh -f 'Default\|SSL async private.*delay=\|tickets enabled on server'
msg "test: Full minus CTR_DRBG, USE_PSA_CRYPTO - compat.sh (subset)"
tests/compat.sh -m tls12 -t 'ECDSA PSK' -V NO -p OpenSSL
}
component_test_no_hmac_drbg_classic () {
msg "build: Full minus HMAC_DRBG, classic crypto in TLS"
scripts/config.py full
scripts/config.py unset MBEDTLS_HMAC_DRBG_C
scripts/config.py unset MBEDTLS_ECDSA_DETERMINISTIC # requires HMAC_DRBG
scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: Full minus HMAC_DRBG, classic crypto - main suites"
make test
# Normally our ECDSA implementation uses deterministic ECDSA. But since
# HMAC_DRBG is disabled in this configuration, randomized ECDSA is used
# instead.
# Test SSL with non-deterministic ECDSA. Only test features that
# might be affected by how ECDSA signature is performed.
msg "test: Full minus HMAC_DRBG, classic crypto - ssl-opt.sh (subset)"
tests/ssl-opt.sh -f 'Default\|SSL async private: sign'
# To save time, only test one protocol version, since this part of
# the protocol is identical in (D)TLS up to 1.2.
msg "test: Full minus HMAC_DRBG, classic crypto - compat.sh (ECDSA)"
tests/compat.sh -m tls12 -t 'ECDSA'
}
component_test_no_hmac_drbg_use_psa () {
msg "build: Full minus HMAC_DRBG, PSA crypto in TLS"
scripts/config.py full
scripts/config.py unset MBEDTLS_HMAC_DRBG_C
scripts/config.py unset MBEDTLS_ECDSA_DETERMINISTIC # requires HMAC_DRBG
scripts/config.py set MBEDTLS_USE_PSA_CRYPTO
CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: Full minus HMAC_DRBG, USE_PSA_CRYPTO - main suites"
make test
# Normally our ECDSA implementation uses deterministic ECDSA. But since
# HMAC_DRBG is disabled in this configuration, randomized ECDSA is used
# instead.
# Test SSL with non-deterministic ECDSA. Only test features that
# might be affected by how ECDSA signature is performed.
msg "test: Full minus HMAC_DRBG, USE_PSA_CRYPTO - ssl-opt.sh (subset)"
tests/ssl-opt.sh -f 'Default\|SSL async private: sign'
# To save time, only test one protocol version, since this part of
# the protocol is identical in (D)TLS up to 1.2.
msg "test: Full minus HMAC_DRBG, USE_PSA_CRYPTO - compat.sh (ECDSA)"
tests/compat.sh -m tls12 -t 'ECDSA'
}
component_test_psa_external_rng_no_drbg_classic () {
msg "build: PSA_CRYPTO_EXTERNAL_RNG minus *_DRBG, classic crypto in TLS"
scripts/config.py full
scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
scripts/config.py set MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG
scripts/config.py unset MBEDTLS_ENTROPY_C
scripts/config.py unset MBEDTLS_ENTROPY_NV_SEED
scripts/config.py unset MBEDTLS_PLATFORM_NV_SEED_ALT
scripts/config.py unset MBEDTLS_CTR_DRBG_C
scripts/config.py unset MBEDTLS_HMAC_DRBG_C
scripts/config.py unset MBEDTLS_ECDSA_DETERMINISTIC # requires HMAC_DRBG
# When MBEDTLS_USE_PSA_CRYPTO is disabled and there is no DRBG,
# the SSL test programs don't have an RNG and can't work. Explicitly
# make them use the PSA RNG with -DMBEDTLS_TEST_USE_PSA_CRYPTO_RNG.
make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DMBEDTLS_TEST_USE_PSA_CRYPTO_RNG" LDFLAGS="$ASAN_CFLAGS"
msg "test: PSA_CRYPTO_EXTERNAL_RNG minus *_DRBG, classic crypto - main suites"
make test
msg "test: PSA_CRYPTO_EXTERNAL_RNG minus *_DRBG, classic crypto - ssl-opt.sh (subset)"
tests/ssl-opt.sh -f 'Default'
}
component_test_psa_external_rng_no_drbg_use_psa () {
msg "build: PSA_CRYPTO_EXTERNAL_RNG minus *_DRBG, PSA crypto in TLS"
scripts/config.py full
scripts/config.py set MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG
scripts/config.py unset MBEDTLS_ENTROPY_C
scripts/config.py unset MBEDTLS_ENTROPY_NV_SEED
scripts/config.py unset MBEDTLS_PLATFORM_NV_SEED_ALT
scripts/config.py unset MBEDTLS_CTR_DRBG_C
scripts/config.py unset MBEDTLS_HMAC_DRBG_C
scripts/config.py unset MBEDTLS_ECDSA_DETERMINISTIC # requires HMAC_DRBG
make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS" LDFLAGS="$ASAN_CFLAGS"
msg "test: PSA_CRYPTO_EXTERNAL_RNG minus *_DRBG, PSA crypto - main suites"
make test
msg "test: PSA_CRYPTO_EXTERNAL_RNG minus *_DRBG, PSA crypto - ssl-opt.sh (subset)"
tests/ssl-opt.sh -f 'Default\|opaque'
}
component_test_psa_external_rng_use_psa_crypto () {
msg "build: full + PSA_CRYPTO_EXTERNAL_RNG + USE_PSA_CRYPTO minus CTR_DRBG"
scripts/config.py full
scripts/config.py set MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG
scripts/config.py set MBEDTLS_USE_PSA_CRYPTO
scripts/config.py unset MBEDTLS_CTR_DRBG_C
make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS" LDFLAGS="$ASAN_CFLAGS"
msg "test: full + PSA_CRYPTO_EXTERNAL_RNG + USE_PSA_CRYPTO minus CTR_DRBG"
make test
msg "test: full + PSA_CRYPTO_EXTERNAL_RNG + USE_PSA_CRYPTO minus CTR_DRBG"
tests/ssl-opt.sh -f 'Default\|opaque'
}
component_test_psa_inject_entropy () {
msg "build: full + MBEDTLS_PSA_INJECT_ENTROPY"
scripts/config.py full
scripts/config.py set MBEDTLS_PSA_INJECT_ENTROPY
scripts/config.py set MBEDTLS_ENTROPY_NV_SEED
scripts/config.py set MBEDTLS_NO_DEFAULT_ENTROPY_SOURCES
scripts/config.py unset MBEDTLS_PLATFORM_NV_SEED_ALT
scripts/config.py unset MBEDTLS_PLATFORM_STD_NV_SEED_READ
scripts/config.py unset MBEDTLS_PLATFORM_STD_NV_SEED_WRITE
make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS '-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/user-config-for-test.h\"'" LDFLAGS="$ASAN_CFLAGS"
msg "test: full + MBEDTLS_PSA_INJECT_ENTROPY"
make test
}
component_test_sw_inet_pton () {
msg "build: default plus MBEDTLS_TEST_SW_INET_PTON"
# MBEDTLS_TEST_HOOKS required for x509_crt_parse_cn_inet_pton
scripts/config.py set MBEDTLS_TEST_HOOKS
make CFLAGS="-DMBEDTLS_TEST_SW_INET_PTON"
msg "test: default plus MBEDTLS_TEST_SW_INET_PTON"
make test
}
component_full_no_pkparse_pkwrite() {
msg "build: full without pkparse and pkwrite"
scripts/config.py crypto_full
scripts/config.py unset MBEDTLS_PK_PARSE_C
scripts/config.py unset MBEDTLS_PK_WRITE_C
make CFLAGS="$ASAN_CFLAGS" LDFLAGS="$ASAN_CFLAGS"
# Ensure that PK_[PARSE|WRITE]_C were not re-enabled accidentally (additive config).
not grep mbedtls_pk_parse_key ${BUILTIN_SRC_PATH}/pkparse.o
not grep mbedtls_pk_write_key_der ${BUILTIN_SRC_PATH}/pkwrite.o
msg "test: full without pkparse and pkwrite"
make test
}
component_test_crypto_full_md_light_only () {
msg "build: crypto_full with only the light subset of MD"
scripts/config.py crypto_full
# Disable MD
scripts/config.py unset MBEDTLS_MD_C
# Disable direct dependencies of MD_C
scripts/config.py unset MBEDTLS_HKDF_C
scripts/config.py unset MBEDTLS_HMAC_DRBG_C
scripts/config.py unset MBEDTLS_PKCS7_C
# Disable indirect dependencies of MD_C
scripts/config.py unset MBEDTLS_ECDSA_DETERMINISTIC # needs HMAC_DRBG
scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_DETERMINISTIC_ECDSA
# Disable things that would auto-enable MD_C
scripts/config.py unset MBEDTLS_PKCS5_C
# Note: MD-light is auto-enabled in build_info.h by modules that need it,
# which we haven't disabled, so no need to explicitly enable it.
make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS" LDFLAGS="$ASAN_CFLAGS"
# Make sure we don't have the HMAC functions, but the hashing functions
not grep mbedtls_md_hmac ${BUILTIN_SRC_PATH}/md.o
grep mbedtls_md ${BUILTIN_SRC_PATH}/md.o
msg "test: crypto_full with only the light subset of MD"
make test
}
component_test_full_no_cipher () {
msg "build: full no CIPHER"
scripts/config.py full
scripts/config.py unset MBEDTLS_CIPHER_C
# The built-in implementation of the following algs/key-types depends
# on CIPHER_C so we disable them.
# This does not hold for KEY_TYPE_CHACHA20 and ALG_CHACHA20_POLY1305
# so we keep them enabled.
scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_CCM_STAR_NO_TAG
scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_CMAC
scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_CBC_NO_PADDING
scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_CBC_PKCS7
scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_CFB
scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_CTR
scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_ECB_NO_PADDING
scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_OFB
scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_PBKDF2_AES_CMAC_PRF_128
scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_STREAM_CIPHER
scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_KEY_TYPE_DES
# The following modules directly depends on CIPHER_C
scripts/config.py unset MBEDTLS_CMAC_C
scripts/config.py unset MBEDTLS_NIST_KW_C
make
# Ensure that CIPHER_C was not re-enabled
not grep mbedtls_cipher_init ${BUILTIN_SRC_PATH}/cipher.o
msg "test: full no CIPHER"
make test
}
component_test_full_no_ccm() {
msg "build: full no PSA_WANT_ALG_CCM"
# Full config enables:
# - USE_PSA_CRYPTO so that TLS code dispatches cipher/AEAD to PSA
# - CRYPTO_CONFIG so that PSA_WANT config symbols are evaluated
scripts/config.py full
# Disable PSA_WANT_ALG_CCM so that CCM is not supported in PSA. CCM_C is still
# enabled, but not used from TLS since USE_PSA is set.
# This is helpful to ensure that TLS tests below have proper dependencies.
#
# Note: also PSA_WANT_ALG_CCM_STAR_NO_TAG is enabled, but it does not cause
# PSA_WANT_ALG_CCM to be re-enabled.
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CCM
make
msg "test: full no PSA_WANT_ALG_CCM"
make test
}
component_test_full_no_ccm_star_no_tag() {
msg "build: full no PSA_WANT_ALG_CCM_STAR_NO_TAG"
# Full config enables CRYPTO_CONFIG so that PSA_WANT config symbols are evaluated
scripts/config.py full
# Disable CCM_STAR_NO_TAG, which is the target of this test, as well as all
# other components that enable MBEDTLS_PSA_BUILTIN_CIPHER internal symbol.
# This basically disables all unauthenticated ciphers on the PSA side, while
# keeping AEADs enabled.
#
# Note: PSA_WANT_ALG_CCM is enabled, but it does not cause
# PSA_WANT_ALG_CCM_STAR_NO_TAG to be re-enabled.
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CCM_STAR_NO_TAG
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_STREAM_CIPHER
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CTR
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CFB
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_OFB
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_ECB_NO_PADDING
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CBC_NO_PADDING
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CBC_PKCS7
make
# Ensure MBEDTLS_PSA_BUILTIN_CIPHER was not enabled
not grep mbedtls_psa_cipher ${PSA_CORE_PATH}/psa_crypto_cipher.o
msg "test: full no PSA_WANT_ALG_CCM_STAR_NO_TAG"
make test
}
component_test_tls1_2_default_stream_cipher_only () {
msg "build: default with only stream cipher use psa"
scripts/config.py set MBEDTLS_USE_PSA_CRYPTO
scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG
# Disable AEAD (controlled by the presence of one of GCM_C, CCM_C, CHACHAPOLY_C)
scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_CCM
scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_CCM_STAR_NO_TAG
scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_GCM
scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_CHACHA20_POLY1305
# Note: The three unsets below are to be removed for Mbed TLS 4.0
scripts/config.py unset MBEDTLS_GCM_C
scripts/config.py unset MBEDTLS_CCM_C
scripts/config.py unset MBEDTLS_CHACHAPOLY_C
#Disable TLS 1.3 (as no AEAD)
scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
# Disable CBC. Note: When implemented, PSA_WANT_ALG_CBC_MAC will also need to be unset here to fully disable CBC
scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_CBC_NO_PADDING
scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_CBC_PKCS7
# Disable CBC-legacy (controlled by MBEDTLS_CIPHER_MODE_CBC plus at least one block cipher (AES, ARIA, Camellia, DES))
# Note: The unset below is to be removed for 4.0
scripts/config.py unset MBEDTLS_CIPHER_MODE_CBC
# Disable CBC-EtM (controlled by the same as CBC-legacy plus MBEDTLS_SSL_ENCRYPT_THEN_MAC)
scripts/config.py unset MBEDTLS_SSL_ENCRYPT_THEN_MAC
# Enable stream (currently that's just the NULL pseudo-cipher (controlled by MBEDTLS_CIPHER_NULL_CIPHER))
scripts/config.py set MBEDTLS_CIPHER_NULL_CIPHER
# Modules that depend on AEAD
scripts/config.py unset MBEDTLS_SSL_CONTEXT_SERIALIZATION
scripts/config.py unset MBEDTLS_SSL_TICKET_C
make
msg "test: default with only stream cipher use psa"
make test
# Not running ssl-opt.sh because most tests require a non-NULL ciphersuite.
}
component_test_tls1_2_default_cbc_legacy_cipher_only () {
msg "build: default with only CBC-legacy cipher use psa"
scripts/config.py set MBEDTLS_USE_PSA_CRYPTO
scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG
# Disable AEAD (controlled by the presence of one of GCM_C, CCM_C, CHACHAPOLY_C)
scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_CCM
scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_CCM_STAR_NO_TAG
scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_GCM
scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_CHACHA20_POLY1305
# Note: The three unsets below are to be removed for Mbed TLS 4.0
scripts/config.py unset MBEDTLS_GCM_C
scripts/config.py unset MBEDTLS_CCM_C
scripts/config.py unset MBEDTLS_CHACHAPOLY_C
#Disable TLS 1.3 (as no AEAD)
scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
# Enable CBC-legacy (controlled by MBEDTLS_CIPHER_MODE_CBC plus at least one block cipher (AES, ARIA, Camellia, DES))
scripts/config.py -f $CRYPTO_CONFIG_H set PSA_WANT_ALG_CBC_NO_PADDING
# Disable CBC-EtM (controlled by the same as CBC-legacy plus MBEDTLS_SSL_ENCRYPT_THEN_MAC)
scripts/config.py unset MBEDTLS_SSL_ENCRYPT_THEN_MAC
# Disable stream (currently that's just the NULL pseudo-cipher (controlled by MBEDTLS_CIPHER_NULL_CIPHER))
scripts/config.py unset MBEDTLS_CIPHER_NULL_CIPHER
# Modules that depend on AEAD
scripts/config.py unset MBEDTLS_SSL_CONTEXT_SERIALIZATION
scripts/config.py unset MBEDTLS_SSL_TICKET_C
make
msg "test: default with only CBC-legacy cipher use psa"
make test
msg "test: default with only CBC-legacy cipher use psa - ssl-opt.sh (subset)"
tests/ssl-opt.sh -f "TLS 1.2"
}
component_test_tls1_2_default_cbc_legacy_cbc_etm_cipher_only () {
msg "build: default with only CBC-legacy and CBC-EtM ciphers use psa"
scripts/config.py set MBEDTLS_USE_PSA_CRYPTO
scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG
# Disable AEAD (controlled by the presence of one of GCM_C, CCM_C, CHACHAPOLY_C)
scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_CCM
scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_CCM_STAR_NO_TAG
scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_GCM
scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_CHACHA20_POLY1305
# Note: The three unsets below are to be removed for Mbed TLS 4.0
scripts/config.py unset MBEDTLS_GCM_C
scripts/config.py unset MBEDTLS_CCM_C
scripts/config.py unset MBEDTLS_CHACHAPOLY_C
#Disable TLS 1.3 (as no AEAD)
scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
# Enable CBC-legacy (controlled by MBEDTLS_CIPHER_MODE_CBC plus at least one block cipher (AES, ARIA, Camellia, DES))
scripts/config.py -f $CRYPTO_CONFIG_H set PSA_WANT_ALG_CBC_NO_PADDING
# Enable CBC-EtM (controlled by the same as CBC-legacy plus MBEDTLS_SSL_ENCRYPT_THEN_MAC)
scripts/config.py set MBEDTLS_SSL_ENCRYPT_THEN_MAC
# Disable stream (currently that's just the NULL pseudo-cipher (controlled by MBEDTLS_CIPHER_NULL_CIPHER))
scripts/config.py unset MBEDTLS_CIPHER_NULL_CIPHER
# Modules that depend on AEAD
scripts/config.py unset MBEDTLS_SSL_CONTEXT_SERIALIZATION
scripts/config.py unset MBEDTLS_SSL_TICKET_C
make
msg "test: default with only CBC-legacy and CBC-EtM ciphers use psa"
make test
msg "test: default with only CBC-legacy and CBC-EtM ciphers use psa - ssl-opt.sh (subset)"
tests/ssl-opt.sh -f "TLS 1.2"
}
# We're not aware of any other (open source) implementation of EC J-PAKE in TLS
# that we could use for interop testing. However, we now have sort of two
# implementations ourselves: one using PSA, the other not. At least test that
# these two interoperate with each other.
component_test_tls1_2_ecjpake_compatibility() {
msg "build: TLS1.2 server+client w/ EC-JPAKE w/o USE_PSA"
scripts/config.py set MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED
# Explicitly make lib first to avoid a race condition:
# https://github.com/Mbed-TLS/mbedtls/issues/8229
make lib
make -C programs ssl/ssl_server2 ssl/ssl_client2
cp programs/ssl/ssl_server2 s2_no_use_psa
cp programs/ssl/ssl_client2 c2_no_use_psa
msg "build: TLS1.2 server+client w/ EC-JPAKE w/ USE_PSA"
scripts/config.py set MBEDTLS_USE_PSA_CRYPTO
make clean
make lib
make -C programs ssl/ssl_server2 ssl/ssl_client2
make -C programs test/udp_proxy test/query_compile_time_config
msg "test: server w/o USE_PSA - client w/ USE_PSA, text password"
P_SRV=../s2_no_use_psa tests/ssl-opt.sh -f "ECJPAKE: working, TLS"
msg "test: server w/o USE_PSA - client w/ USE_PSA, opaque password"
P_SRV=../s2_no_use_psa tests/ssl-opt.sh -f "ECJPAKE: opaque password client only, working, TLS"
msg "test: client w/o USE_PSA - server w/ USE_PSA, text password"
P_CLI=../c2_no_use_psa tests/ssl-opt.sh -f "ECJPAKE: working, TLS"
msg "test: client w/o USE_PSA - server w/ USE_PSA, opaque password"
P_CLI=../c2_no_use_psa tests/ssl-opt.sh -f "ECJPAKE: opaque password server only, working, TLS"
rm s2_no_use_psa c2_no_use_psa
}
component_test_everest () {
msg "build: Everest ECDH context (ASan build)" # ~ 6 min
scripts/config.py set MBEDTLS_ECDH_VARIANT_EVEREST_ENABLED
CC=clang cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: Everest ECDH context - main suites (inc. selftests) (ASan build)" # ~ 50s
make test
msg "test: metatests (clang, ASan)"
tests/scripts/run-metatests.sh any asan poison
msg "test: Everest ECDH context - ECDH-related part of ssl-opt.sh (ASan build)" # ~ 5s
tests/ssl-opt.sh -f ECDH
msg "test: Everest ECDH context - compat.sh with some ECDH ciphersuites (ASan build)" # ~ 3 min
# Exclude some symmetric ciphers that are redundant here to gain time.
tests/compat.sh -f ECDH -V NO -e 'ARIA\|CAMELLIA\|CHACHA'
}
component_test_everest_curve25519_only () {
msg "build: Everest ECDH context, only Curve25519" # ~ 6 min
scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG
scripts/config.py set MBEDTLS_ECDH_VARIANT_EVEREST_ENABLED
scripts/config.py unset MBEDTLS_ECDSA_C
scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_DETERMINISTIC_ECDSA
scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_ECDSA
scripts/config.py -f $CRYPTO_CONFIG_H set PSA_WANT_ALG_ECDH
scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED
scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
scripts/config.py unset MBEDTLS_ECJPAKE_C
scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_JPAKE
# Disable all curves
scripts/config.py unset-all "MBEDTLS_ECP_DP_[0-9A-Z_a-z]*_ENABLED"
scripts/config.py -f $CRYPTO_CONFIG_H unset-all "PSA_WANT_ECC_[0-9A-Z_a-z]*$"
scripts/config.py -f $CRYPTO_CONFIG_H set PSA_WANT_ECC_MONTGOMERY_255
make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS" LDFLAGS="$ASAN_CFLAGS"
msg "test: Everest ECDH context, only Curve25519" # ~ 50s
make test
}
component_test_small_ssl_out_content_len () {
msg "build: small SSL_OUT_CONTENT_LEN (ASan build)"
scripts/config.py set MBEDTLS_SSL_IN_CONTENT_LEN 16384
scripts/config.py set MBEDTLS_SSL_OUT_CONTENT_LEN 4096
CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: small SSL_OUT_CONTENT_LEN - ssl-opt.sh MFL and large packet tests"
tests/ssl-opt.sh -f "Max fragment\|Large packet"
}
component_test_small_ssl_in_content_len () {
msg "build: small SSL_IN_CONTENT_LEN (ASan build)"
scripts/config.py set MBEDTLS_SSL_IN_CONTENT_LEN 4096
scripts/config.py set MBEDTLS_SSL_OUT_CONTENT_LEN 16384
CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: small SSL_IN_CONTENT_LEN - ssl-opt.sh MFL tests"
tests/ssl-opt.sh -f "Max fragment"
}
component_test_small_ssl_dtls_max_buffering () {
msg "build: small MBEDTLS_SSL_DTLS_MAX_BUFFERING #0"
scripts/config.py set MBEDTLS_SSL_DTLS_MAX_BUFFERING 1000
CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: small MBEDTLS_SSL_DTLS_MAX_BUFFERING #0 - ssl-opt.sh specific reordering test"
tests/ssl-opt.sh -f "DTLS reordering: Buffer out-of-order hs msg before reassembling next, free buffered msg"
}
component_test_small_mbedtls_ssl_dtls_max_buffering () {
msg "build: small MBEDTLS_SSL_DTLS_MAX_BUFFERING #1"
scripts/config.py set MBEDTLS_SSL_DTLS_MAX_BUFFERING 190
CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: small MBEDTLS_SSL_DTLS_MAX_BUFFERING #1 - ssl-opt.sh specific reordering test"
tests/ssl-opt.sh -f "DTLS reordering: Buffer encrypted Finished message, drop for fragmented NewSessionTicket"
}
component_test_psa_collect_statuses () {
msg "build+test: psa_collect_statuses" # ~30s
scripts/config.py full
tests/scripts/psa_collect_statuses.py
# Check that psa_crypto_init() succeeded at least once
grep -q '^0:psa_crypto_init:' tests/statuses.log
rm -f tests/statuses.log
}
component_test_full_cmake_clang () {
msg "build: cmake, full config, clang" # ~ 50s
scripts/config.py full
CC=clang CXX=clang cmake -D CMAKE_BUILD_TYPE:String=Release -D ENABLE_TESTING=On -D TEST_CPP=1 .
make
msg "test: main suites (full config, clang)" # ~ 5s
make test
msg "test: cpp_dummy_build (full config, clang)" # ~ 1s
programs/test/cpp_dummy_build
msg "test: metatests (clang)"
tests/scripts/run-metatests.sh any pthread
msg "program demos (full config, clang)" # ~10s
tests/scripts/run_demos.py
msg "test: psa_constant_names (full config, clang)" # ~ 1s
tests/scripts/test_psa_constant_names.py
msg "test: ssl-opt.sh default, ECJPAKE, SSL async (full config)" # ~ 1s
tests/ssl-opt.sh -f 'Default\|ECJPAKE\|SSL async private'
}
skip_suites_without_constant_flow () {
# Skip the test suites that don't have any constant-flow annotations.
# This will need to be adjusted if we ever start declaring things as
# secret from macros or functions inside tests/include or tests/src.
SKIP_TEST_SUITES=$(
git -C tests/suites grep -L TEST_CF_ 'test_suite_*.function' |
sed 's/test_suite_//; s/\.function$//' |
tr '\n' ,),$(
git -C tf-psa-crypto/tests/suites grep -L TEST_CF_ 'test_suite_*.function' |
sed 's/test_suite_//; s/\.function$//' |
tr '\n' ,)
export SKIP_TEST_SUITES
}
skip_all_except_given_suite () {
# Skip all but the given test suite
SKIP_TEST_SUITES=$(
ls -1 tests/suites/test_suite_*.function |
grep -v $1.function |
sed 's/tests.suites.test_suite_//; s/\.function$//' |
tr '\n' ,),$(
ls -1 tf-psa-crypto/tests/suites/test_suite_*.function |
grep -v $1.function |
sed 's/tf-psa-crypto.tests.suites.test_suite_//; s/\.function$//' |
tr '\n' ,)
export SKIP_TEST_SUITES
}
component_test_memsan_constant_flow () {
# This tests both (1) accesses to undefined memory, and (2) branches or
# memory access depending on secret values. To distinguish between those:
# - unset MBEDTLS_TEST_CONSTANT_FLOW_MEMSAN - does the failure persist?
# - or alternatively, change the build type to MemSanDbg, which enables
# origin tracking and nicer stack traces (which are useful for debugging
# anyway), and check if the origin was TEST_CF_SECRET() or something else.
msg "build: cmake MSan (clang), full config minus MBEDTLS_USE_PSA_CRYPTO with constant flow testing"
scripts/config.py full
scripts/config.py set MBEDTLS_TEST_CONSTANT_FLOW_MEMSAN
scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
scripts/config.py unset MBEDTLS_AESNI_C # memsan doesn't grok asm
CC=clang cmake -D CMAKE_BUILD_TYPE:String=MemSan .
make
msg "test: main suites (full minus MBEDTLS_USE_PSA_CRYPTO, Msan + constant flow)"
make test
}
component_test_memsan_constant_flow_psa () {
# This tests both (1) accesses to undefined memory, and (2) branches or
# memory access depending on secret values. To distinguish between those:
# - unset MBEDTLS_TEST_CONSTANT_FLOW_MEMSAN - does the failure persist?
# - or alternatively, change the build type to MemSanDbg, which enables
# origin tracking and nicer stack traces (which are useful for debugging
# anyway), and check if the origin was TEST_CF_SECRET() or something else.
msg "build: cmake MSan (clang), full config with constant flow testing"
scripts/config.py full
scripts/config.py set MBEDTLS_TEST_CONSTANT_FLOW_MEMSAN
scripts/config.py unset MBEDTLS_AESNI_C # memsan doesn't grok asm
CC=clang cmake -D CMAKE_BUILD_TYPE:String=MemSan .
make
msg "test: main suites (Msan + constant flow)"
make test
}
component_release_test_valgrind_constant_flow () {
# This tests both (1) everything that valgrind's memcheck usually checks
# (heap buffer overflows, use of uninitialized memory, use-after-free,
# etc.) and (2) branches or memory access depending on secret values,
# which will be reported as uninitialized memory. To distinguish between
# secret and actually uninitialized:
# - unset MBEDTLS_TEST_CONSTANT_FLOW_VALGRIND - does the failure persist?
# - or alternatively, build with debug info and manually run the offending
# test suite with valgrind --track-origins=yes, then check if the origin
# was TEST_CF_SECRET() or something else.
msg "build: cmake release GCC, full config minus MBEDTLS_USE_PSA_CRYPTO with constant flow testing"
scripts/config.py full
scripts/config.py set MBEDTLS_TEST_CONSTANT_FLOW_VALGRIND
scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
skip_suites_without_constant_flow
cmake -D CMAKE_BUILD_TYPE:String=Release .
make
# this only shows a summary of the results (how many of each type)
# details are left in Testing/<date>/DynamicAnalysis.xml
msg "test: some suites (full minus MBEDTLS_USE_PSA_CRYPTO, valgrind + constant flow)"
make memcheck
# Test asm path in constant time module - by default, it will test the plain C
# path under Valgrind or Memsan. Running only the constant_time tests is fast (<1s)
msg "test: valgrind asm constant_time"
scripts/config.py --force set MBEDTLS_TEST_CONSTANT_FLOW_ASM
skip_all_except_given_suite test_suite_constant_time
cmake -D CMAKE_BUILD_TYPE:String=Release .
make clean
make
make memcheck
}
component_release_test_valgrind_constant_flow_psa () {
# This tests both (1) everything that valgrind's memcheck usually checks
# (heap buffer overflows, use of uninitialized memory, use-after-free,
# etc.) and (2) branches or memory access depending on secret values,
# which will be reported as uninitialized memory. To distinguish between
# secret and actually uninitialized:
# - unset MBEDTLS_TEST_CONSTANT_FLOW_VALGRIND - does the failure persist?
# - or alternatively, build with debug info and manually run the offending
# test suite with valgrind --track-origins=yes, then check if the origin
# was TEST_CF_SECRET() or something else.
msg "build: cmake release GCC, full config with constant flow testing"
scripts/config.py full
scripts/config.py set MBEDTLS_TEST_CONSTANT_FLOW_VALGRIND
skip_suites_without_constant_flow
cmake -D CMAKE_BUILD_TYPE:String=Release .
make
# this only shows a summary of the results (how many of each type)
# details are left in Testing/<date>/DynamicAnalysis.xml
msg "test: some suites (valgrind + constant flow)"
make memcheck
}
component_test_tsan () {
msg "build: TSan (clang)"
scripts/config.py full
scripts/config.py set MBEDTLS_THREADING_C
scripts/config.py set MBEDTLS_THREADING_PTHREAD
# Self-tests do not currently use multiple threads.
scripts/config.py unset MBEDTLS_SELF_TEST
# The deprecated MBEDTLS_PSA_CRYPTO_SE_C interface is not thread safe.
scripts/config.py unset MBEDTLS_PSA_CRYPTO_SE_C
CC=clang cmake -D CMAKE_BUILD_TYPE:String=TSan .
make
msg "test: main suites (TSan)"
make test
}
component_test_default_no_deprecated () {
# Test that removing the deprecated features from the default
# configuration leaves something consistent.
msg "build: make, default + MBEDTLS_DEPRECATED_REMOVED" # ~ 30s
scripts/config.py set MBEDTLS_DEPRECATED_REMOVED
make CFLAGS='-O -Werror -Wall -Wextra'
msg "test: make, default + MBEDTLS_DEPRECATED_REMOVED" # ~ 5s
make test
}
component_test_full_no_deprecated () {
msg "build: make, full_no_deprecated config" # ~ 30s
scripts/config.py full_no_deprecated
make CFLAGS='-O -Werror -Wall -Wextra'
msg "test: make, full_no_deprecated config" # ~ 5s
make test
msg "test: ensure that X509 has no direct dependency on BIGNUM_C"
not grep mbedtls_mpi library/libmbedx509.a
}
component_test_full_no_deprecated_deprecated_warning () {
# Test that there is nothing deprecated in "full_no_deprecated".
# A deprecated feature would trigger a warning (made fatal) from
# MBEDTLS_DEPRECATED_WARNING.
msg "build: make, full_no_deprecated config, MBEDTLS_DEPRECATED_WARNING" # ~ 30s
scripts/config.py full_no_deprecated
scripts/config.py unset MBEDTLS_DEPRECATED_REMOVED
scripts/config.py set MBEDTLS_DEPRECATED_WARNING
make CFLAGS='-O -Werror -Wall -Wextra'
msg "test: make, full_no_deprecated config, MBEDTLS_DEPRECATED_WARNING" # ~ 5s
make test
}
component_test_full_deprecated_warning () {
# Test that when MBEDTLS_DEPRECATED_WARNING is enabled, the build passes
# with only certain whitelisted types of warnings.
msg "build: make, full config + MBEDTLS_DEPRECATED_WARNING, expect warnings" # ~ 30s
scripts/config.py full
scripts/config.py set MBEDTLS_DEPRECATED_WARNING
# Expect warnings from '#warning' directives in check_config.h.
# Note that gcc is required to allow the use of -Wno-error=cpp, which allows us to
# display #warning messages without them being treated as errors.
make CC=gcc CFLAGS='-O -Werror -Wall -Wextra -Wno-error=cpp' lib programs
msg "build: make tests, full config + MBEDTLS_DEPRECATED_WARNING, expect warnings" # ~ 30s
# Set MBEDTLS_TEST_DEPRECATED to enable tests for deprecated features.
# By default those are disabled when MBEDTLS_DEPRECATED_WARNING is set.
# Expect warnings from '#warning' directives in check_config.h and
# from the use of deprecated functions in test suites.
make CC=gcc CFLAGS='-O -Werror -Wall -Wextra -Wno-error=deprecated-declarations -Wno-error=cpp -DMBEDTLS_TEST_DEPRECATED' tests
msg "test: full config + MBEDTLS_TEST_DEPRECATED" # ~ 30s
make test
msg "program demos: full config + MBEDTLS_TEST_DEPRECATED" # ~10s
tests/scripts/run_demos.py
}
# Check that the specified libraries exist and are empty.
are_empty_libraries () {
nm "$@" >/dev/null 2>/dev/null
! nm "$@" 2>/dev/null | grep -v ':$' | grep .
}
component_build_crypto_default () {
msg "build: make, crypto only"
scripts/config.py crypto
make CFLAGS='-O1 -Werror'
are_empty_libraries library/libmbedx509.* library/libmbedtls.*
}
component_build_crypto_full () {
msg "build: make, crypto only, full config"
scripts/config.py crypto_full
make CFLAGS='-O1 -Werror'
are_empty_libraries library/libmbedx509.* library/libmbedtls.*
}
component_test_crypto_for_psa_service () {
msg "build: make, config for PSA crypto service"
scripts/config.py crypto
scripts/config.py set MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER
# Disable things that are not needed for just cryptography, to
# reach a configuration that would be typical for a PSA cryptography
# service providing all implemented PSA algorithms.
# System stuff
scripts/config.py unset MBEDTLS_ERROR_C
scripts/config.py unset MBEDTLS_TIMING_C
scripts/config.py unset MBEDTLS_VERSION_FEATURES
# Crypto stuff with no PSA interface
scripts/config.py unset MBEDTLS_BASE64_C
# Keep MBEDTLS_CIPHER_C because psa_crypto_cipher, CCM and GCM need it.
scripts/config.py unset MBEDTLS_HKDF_C # PSA's HKDF is independent
# Keep MBEDTLS_MD_C because deterministic ECDSA needs it for HMAC_DRBG.
scripts/config.py unset MBEDTLS_NIST_KW_C
scripts/config.py unset MBEDTLS_PEM_PARSE_C
scripts/config.py unset MBEDTLS_PEM_WRITE_C
scripts/config.py unset MBEDTLS_PKCS12_C
scripts/config.py unset MBEDTLS_PKCS5_C
# MBEDTLS_PK_PARSE_C and MBEDTLS_PK_WRITE_C are actually currently needed
# in PSA code to work with RSA keys. We don't require users to set those:
# they will be reenabled in build_info.h.
scripts/config.py unset MBEDTLS_PK_C
scripts/config.py unset MBEDTLS_PK_PARSE_C
scripts/config.py unset MBEDTLS_PK_WRITE_C
make CFLAGS='-O1 -Werror' all test
are_empty_libraries library/libmbedx509.* library/libmbedtls.*
}
component_build_crypto_baremetal () {
msg "build: make, crypto only, baremetal config"
scripts/config.py crypto_baremetal
make CFLAGS="-O1 -Werror -I$PWD/tests/include/baremetal-override/"
are_empty_libraries library/libmbedx509.* library/libmbedtls.*
}
support_build_crypto_baremetal () {
support_build_baremetal "$@"
}
component_build_baremetal () {
msg "build: make, baremetal config"
scripts/config.py baremetal
make CFLAGS="-O1 -Werror -I$PWD/tests/include/baremetal-override/"
}
support_build_baremetal () {
# Older Glibc versions include time.h from other headers such as stdlib.h,
# which makes the no-time.h-in-baremetal check fail. Ubuntu 16.04 has this
# problem, Ubuntu 18.04 is ok.
! grep -q -F time.h /usr/include/x86_64-linux-gnu/sys/types.h
}
# depends.py family of tests
component_test_depends_py_cipher_id () {
msg "test/build: depends.py cipher_id (gcc)"
tests/scripts/depends.py cipher_id --unset-use-psa
}
component_test_depends_py_cipher_chaining () {
msg "test/build: depends.py cipher_chaining (gcc)"
tests/scripts/depends.py cipher_chaining --unset-use-psa
}
component_test_depends_py_cipher_padding () {
msg "test/build: depends.py cipher_padding (gcc)"
tests/scripts/depends.py cipher_padding --unset-use-psa
}
component_test_depends_py_curves () {
msg "test/build: depends.py curves (gcc)"
tests/scripts/depends.py curves --unset-use-psa
}
component_test_depends_py_hashes () {
msg "test/build: depends.py hashes (gcc)"
tests/scripts/depends.py hashes --unset-use-psa
}
component_test_depends_py_kex () {
msg "test/build: depends.py kex (gcc)"
tests/scripts/depends.py kex --unset-use-psa
}
component_test_depends_py_pkalgs () {
msg "test/build: depends.py pkalgs (gcc)"
tests/scripts/depends.py pkalgs --unset-use-psa
}
# PSA equivalents of the depends.py tests
component_test_depends_py_cipher_id_psa () {
msg "test/build: depends.py cipher_id (gcc) with MBEDTLS_USE_PSA_CRYPTO defined"
tests/scripts/depends.py cipher_id
}
component_test_depends_py_cipher_chaining_psa () {
msg "test/build: depends.py cipher_chaining (gcc) with MBEDTLS_USE_PSA_CRYPTO defined"
tests/scripts/depends.py cipher_chaining
}
component_test_depends_py_cipher_padding_psa () {
msg "test/build: depends.py cipher_padding (gcc) with MBEDTLS_USE_PSA_CRYPTO defined"
tests/scripts/depends.py cipher_padding
}
component_test_depends_py_curves_psa () {
msg "test/build: depends.py curves (gcc) with MBEDTLS_USE_PSA_CRYPTO defined"
tests/scripts/depends.py curves
}
component_test_depends_py_hashes_psa () {
msg "test/build: depends.py hashes (gcc) with MBEDTLS_USE_PSA_CRYPTO defined"
tests/scripts/depends.py hashes
}
component_test_depends_py_kex_psa () {
msg "test/build: depends.py kex (gcc) with MBEDTLS_USE_PSA_CRYPTO defined"
tests/scripts/depends.py kex
}
component_test_depends_py_pkalgs_psa () {
msg "test/build: depends.py pkalgs (gcc) with MBEDTLS_USE_PSA_CRYPTO defined"
tests/scripts/depends.py pkalgs
}
component_test_psa_crypto_config_ffdh_2048_only () {
msg "build: full config - only DH 2048"
scripts/config.py full
# Disable all DH groups other than 2048.
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_DH_RFC7919_3072
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_DH_RFC7919_4096
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_DH_RFC7919_6144
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_DH_RFC7919_8192
make CFLAGS="$ASAN_CFLAGS -Werror" LDFLAGS="$ASAN_CFLAGS"
msg "test: full config - only DH 2048"
make test
msg "ssl-opt: full config - only DH 2048"
tests/ssl-opt.sh -f "ffdh"
}
component_build_no_pk_rsa_alt_support () {
msg "build: !MBEDTLS_PK_RSA_ALT_SUPPORT" # ~30s
scripts/config.py full
scripts/config.py unset MBEDTLS_PK_RSA_ALT_SUPPORT
scripts/config.py set MBEDTLS_RSA_C
scripts/config.py set MBEDTLS_X509_CRT_WRITE_C
# Only compile - this is primarily to test for compile issues
make CFLAGS='-Werror -Wall -Wextra -I../tests/include/alt-dummy'
}
component_build_module_alt () {
msg "build: MBEDTLS_XXX_ALT" # ~30s
scripts/config.py full
# Disable options that are incompatible with some ALT implementations:
# aesni.c references mbedtls_aes_context fields directly.
scripts/config.py unset MBEDTLS_AESNI_C
scripts/config.py unset MBEDTLS_AESCE_C
# MBEDTLS_ECP_RESTARTABLE is documented as incompatible.
scripts/config.py unset MBEDTLS_ECP_RESTARTABLE
# You can only have one threading implementation: alt or pthread, not both.
scripts/config.py unset MBEDTLS_THREADING_PTHREAD
# The SpecifiedECDomain parsing code accesses mbedtls_ecp_group fields
# directly and assumes the implementation works with partial groups.
scripts/config.py unset MBEDTLS_PK_PARSE_EC_EXTENDED
# MBEDTLS_SHA256_*ALT can't be used with MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_*
scripts/config.py unset MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_IF_PRESENT
scripts/config.py unset MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_ONLY
# MBEDTLS_SHA512_*ALT can't be used with MBEDTLS_SHA512_USE_A64_CRYPTO_*
scripts/config.py unset MBEDTLS_SHA512_USE_A64_CRYPTO_IF_PRESENT
scripts/config.py unset MBEDTLS_SHA512_USE_A64_CRYPTO_ONLY
# Enable all MBEDTLS_XXX_ALT for whole modules. Do not enable
# MBEDTLS_XXX_YYY_ALT which are for single functions.
scripts/config.py set-all 'MBEDTLS_([A-Z0-9]*|NIST_KW)_ALT'
# We can only compile, not link, since we don't have any implementations
# suitable for testing with the dummy alt headers.
make CFLAGS='-Werror -Wall -Wextra -I../tests/include/alt-dummy' lib
}
component_test_no_psa_crypto_full_cmake_asan() {
# full minus MBEDTLS_PSA_CRYPTO_C: run the same set of tests as basic-build-test.sh
msg "build: cmake, full config minus PSA crypto, ASan"
scripts/config.py full
scripts/config.py unset MBEDTLS_PSA_CRYPTO_C
scripts/config.py unset MBEDTLS_PSA_CRYPTO_CLIENT
scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
scripts/config.py unset MBEDTLS_PSA_ITS_FILE_C
scripts/config.py unset MBEDTLS_PSA_CRYPTO_SE_C
scripts/config.py unset MBEDTLS_PSA_CRYPTO_STORAGE_C
scripts/config.py unset MBEDTLS_LMS_C
scripts/config.py unset MBEDTLS_LMS_PRIVATE
CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: main suites (full minus PSA crypto)"
make test
# Note: ssl-opt.sh has some test cases that depend on
# MBEDTLS_ECP_RESTARTABLE && !MBEDTLS_USE_PSA_CRYPTO
# This is the only component where those tests are not skipped.
msg "test: ssl-opt.sh (full minus PSA crypto)"
tests/ssl-opt.sh
# Note: the next two invocations cover all compat.sh test cases.
# We should use the same here and in basic-build-test.sh.
msg "test: compat.sh: default version (full minus PSA crypto)"
tests/compat.sh -e 'ARIA\|CHACHA'
msg "test: compat.sh: next: ARIA, Chacha (full minus PSA crypto)"
env OPENSSL="$OPENSSL_NEXT" tests/compat.sh -e '^$' -f 'ARIA\|CHACHA'
}
component_test_psa_crypto_config_accel_ecdsa () {
msg "build: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated ECDSA"
# Algorithms and key types to accelerate
loc_accel_list="ALG_ECDSA ALG_DETERMINISTIC_ECDSA \
$(helper_get_psa_key_type_list "ECC") \
$(helper_get_psa_curve_list)"
# Configure
# ---------
# Start from default config (no USE_PSA) + TLS 1.3
helper_libtestdriver1_adjust_config "default"
# Disable the module that's accelerated
scripts/config.py unset MBEDTLS_ECDSA_C
# Disable things that depend on it
scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED
# Build
# -----
# These hashes are needed for some ECDSA signature tests.
loc_extra_list="ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512 \
ALG_SHA3_224 ALG_SHA3_256 ALG_SHA3_384 ALG_SHA3_512"
helper_libtestdriver1_make_drivers "$loc_accel_list" "$loc_extra_list"
helper_libtestdriver1_make_main "$loc_accel_list"
# Make sure this was not re-enabled by accident (additive config)
not grep mbedtls_ecdsa_ ${BUILTIN_SRC_PATH}/ecdsa.o
# Run the tests
# -------------
msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated ECDSA"
make test
}
component_test_psa_crypto_config_accel_ecdh () {
msg "build: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated ECDH"
# Algorithms and key types to accelerate
loc_accel_list="ALG_ECDH \
$(helper_get_psa_key_type_list "ECC") \
$(helper_get_psa_curve_list)"
# Configure
# ---------
# Start from default config (no USE_PSA)
helper_libtestdriver1_adjust_config "default"
# Disable the module that's accelerated
scripts/config.py unset MBEDTLS_ECDH_C
# Disable things that depend on it
scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED
scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED
scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED
scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED
# Build
# -----
helper_libtestdriver1_make_drivers "$loc_accel_list"
helper_libtestdriver1_make_main "$loc_accel_list"
# Make sure this was not re-enabled by accident (additive config)
not grep mbedtls_ecdh_ ${BUILTIN_SRC_PATH}/ecdh.o
# Run the tests
# -------------
msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated ECDH"
make test
}
component_test_psa_crypto_config_accel_ffdh () {
msg "build: full with accelerated FFDH"
# Algorithms and key types to accelerate
loc_accel_list="ALG_FFDH \
$(helper_get_psa_key_type_list "DH") \
$(helper_get_psa_dh_group_list)"
# Configure
# ---------
# start with full (USE_PSA and TLS 1.3)
helper_libtestdriver1_adjust_config "full"
# Disable the module that's accelerated
scripts/config.py unset MBEDTLS_DHM_C
# Disable things that depend on it
scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED
scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED
# Build
# -----
helper_libtestdriver1_make_drivers "$loc_accel_list"
helper_libtestdriver1_make_main "$loc_accel_list"
# Make sure this was not re-enabled by accident (additive config)
not grep mbedtls_dhm_ ${BUILTIN_SRC_PATH}/dhm.o
# Run the tests
# -------------
msg "test: full with accelerated FFDH"
make test
msg "ssl-opt: full with accelerated FFDH alg"
tests/ssl-opt.sh -f "ffdh"
}
component_test_psa_crypto_config_reference_ffdh () {
msg "build: full with non-accelerated FFDH"
# Start with full (USE_PSA and TLS 1.3)
helper_libtestdriver1_adjust_config "full"
# Disable things that are not supported
scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED
scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED
make
msg "test suites: full with non-accelerated FFDH alg"
make test
msg "ssl-opt: full with non-accelerated FFDH alg"
tests/ssl-opt.sh -f "ffdh"
}
component_test_psa_crypto_config_accel_pake() {
msg "build: full with accelerated PAKE"
loc_accel_list="ALG_JPAKE \
$(helper_get_psa_key_type_list "ECC") \
$(helper_get_psa_curve_list)"
# Configure
# ---------
helper_libtestdriver1_adjust_config "full"
# Make built-in fallback not available
scripts/config.py unset MBEDTLS_ECJPAKE_C
scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED
# Build
# -----
helper_libtestdriver1_make_drivers "$loc_accel_list"
helper_libtestdriver1_make_main "$loc_accel_list"
# Make sure this was not re-enabled by accident (additive config)
not grep mbedtls_ecjpake_init ${BUILTIN_SRC_PATH}/ecjpake.o
# Run the tests
# -------------
msg "test: full with accelerated PAKE"
make test
}
component_test_psa_crypto_config_accel_ecc_some_key_types () {
msg "build: full with accelerated EC algs and some key types"
# Algorithms and key types to accelerate
# For key types, use an explicitly list to omit GENERATE (and DERIVE)
loc_accel_list="ALG_ECDSA ALG_DETERMINISTIC_ECDSA \
ALG_ECDH \
ALG_JPAKE \
KEY_TYPE_ECC_PUBLIC_KEY \
KEY_TYPE_ECC_KEY_PAIR_BASIC \
KEY_TYPE_ECC_KEY_PAIR_IMPORT \
KEY_TYPE_ECC_KEY_PAIR_EXPORT \
$(helper_get_psa_curve_list)"
# Configure
# ---------
# start with config full for maximum coverage (also enables USE_PSA)
helper_libtestdriver1_adjust_config "full"
# Disable modules that are accelerated - some will be re-enabled
scripts/config.py unset MBEDTLS_ECDSA_C
scripts/config.py unset MBEDTLS_ECDH_C
scripts/config.py unset MBEDTLS_ECJPAKE_C
scripts/config.py unset MBEDTLS_ECP_C
# Disable all curves - those that aren't accelerated should be re-enabled
helper_disable_builtin_curves
# Restartable feature is not yet supported by PSA. Once it will in
# the future, the following line could be removed (see issues
# 6061, 6332 and following ones)
scripts/config.py unset MBEDTLS_ECP_RESTARTABLE
# this is not supported by the driver API yet
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_DERIVE
# Build
# -----
# These hashes are needed for some ECDSA signature tests.
loc_extra_list="ALG_SHA_1 ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512 \
ALG_SHA3_224 ALG_SHA3_256 ALG_SHA3_384 ALG_SHA3_512"
helper_libtestdriver1_make_drivers "$loc_accel_list" "$loc_extra_list"
helper_libtestdriver1_make_main "$loc_accel_list"
# ECP should be re-enabled but not the others
not grep mbedtls_ecdh_ ${BUILTIN_SRC_PATH}/ecdh.o
not grep mbedtls_ecdsa ${BUILTIN_SRC_PATH}/ecdsa.o
not grep mbedtls_ecjpake ${BUILTIN_SRC_PATH}/ecjpake.o
grep mbedtls_ecp ${BUILTIN_SRC_PATH}/ecp.o
# Run the tests
# -------------
msg "test suites: full with accelerated EC algs and some key types"
make test
}
# Run tests with only (non-)Weierstrass accelerated
# Common code used in:
# - component_test_psa_crypto_config_accel_ecc_weierstrass_curves
# - component_test_psa_crypto_config_accel_ecc_non_weierstrass_curves
common_test_psa_crypto_config_accel_ecc_some_curves () {
weierstrass=$1
if [ $weierstrass -eq 1 ]; then
desc="Weierstrass"
else
desc="non-Weierstrass"
fi
msg "build: crypto_full minus PK with accelerated EC algs and $desc curves"
# Note: Curves are handled in a special way by the libtestdriver machinery,
# so we only want to include them in the accel list when building the main
# libraries, hence the use of a separate variable.
# Note: the following loop is a modified version of
# helper_get_psa_curve_list that only keeps Weierstrass families.
loc_weierstrass_list=""
loc_non_weierstrass_list=""
for item in $(sed -n 's/^#define PSA_WANT_\(ECC_[0-9A-Z_a-z]*\).*/\1/p' <"$CRYPTO_CONFIG_H"); do
case $item in
ECC_BRAINPOOL*|ECC_SECP*)
loc_weierstrass_list="$loc_weierstrass_list $item"
;;
*)
loc_non_weierstrass_list="$loc_non_weierstrass_list $item"
;;
esac
done
if [ $weierstrass -eq 1 ]; then
loc_curve_list=$loc_weierstrass_list
else
loc_curve_list=$loc_non_weierstrass_list
fi
# Algorithms and key types to accelerate
loc_accel_list="ALG_ECDSA ALG_DETERMINISTIC_ECDSA \
ALG_ECDH \
ALG_JPAKE \
$(helper_get_psa_key_type_list "ECC") \
$loc_curve_list"
# Configure
# ---------
# Start with config crypto_full and remove PK_C:
# that's what's supported now, see docs/driver-only-builds.md.
helper_libtestdriver1_adjust_config "crypto_full"
scripts/config.py unset MBEDTLS_PK_C
scripts/config.py unset MBEDTLS_PK_PARSE_C
scripts/config.py unset MBEDTLS_PK_WRITE_C
# Disable modules that are accelerated - some will be re-enabled
scripts/config.py unset MBEDTLS_ECDSA_C
scripts/config.py unset MBEDTLS_ECDH_C
scripts/config.py unset MBEDTLS_ECJPAKE_C
scripts/config.py unset MBEDTLS_ECP_C
# Disable all curves - those that aren't accelerated should be re-enabled
helper_disable_builtin_curves
# Restartable feature is not yet supported by PSA. Once it will in
# the future, the following line could be removed (see issues
# 6061, 6332 and following ones)
scripts/config.py unset MBEDTLS_ECP_RESTARTABLE
# this is not supported by the driver API yet
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_DERIVE
# Build
# -----
# These hashes are needed for some ECDSA signature tests.
loc_extra_list="ALG_SHA_1 ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512 \
ALG_SHA3_224 ALG_SHA3_256 ALG_SHA3_384 ALG_SHA3_512"
helper_libtestdriver1_make_drivers "$loc_accel_list" "$loc_extra_list"
helper_libtestdriver1_make_main "$loc_accel_list"
# We expect ECDH to be re-enabled for the missing curves
grep mbedtls_ecdh_ ${BUILTIN_SRC_PATH}/ecdh.o
# We expect ECP to be re-enabled, however the parts specific to the
# families of curves that are accelerated should be ommited.
# - functions with mxz in the name are specific to Montgomery curves
# - ecp_muladd is specific to Weierstrass curves
##nm ${BUILTIN_SRC_PATH}/ecp.o | tee ecp.syms
if [ $weierstrass -eq 1 ]; then
not grep mbedtls_ecp_muladd ${BUILTIN_SRC_PATH}/ecp.o
grep mxz ${BUILTIN_SRC_PATH}/ecp.o
else
grep mbedtls_ecp_muladd ${BUILTIN_SRC_PATH}/ecp.o
not grep mxz ${BUILTIN_SRC_PATH}/ecp.o
fi
# We expect ECDSA and ECJPAKE to be re-enabled only when
# Weierstrass curves are not accelerated
if [ $weierstrass -eq 1 ]; then
not grep mbedtls_ecdsa ${BUILTIN_SRC_PATH}/ecdsa.o
not grep mbedtls_ecjpake ${BUILTIN_SRC_PATH}/ecjpake.o
else
grep mbedtls_ecdsa ${BUILTIN_SRC_PATH}/ecdsa.o
grep mbedtls_ecjpake ${BUILTIN_SRC_PATH}/ecjpake.o
fi
# Run the tests
# -------------
msg "test suites: crypto_full minus PK with accelerated EC algs and $desc curves"
make test
}
component_test_psa_crypto_config_accel_ecc_weierstrass_curves () {
common_test_psa_crypto_config_accel_ecc_some_curves 1
}
component_test_psa_crypto_config_accel_ecc_non_weierstrass_curves () {
common_test_psa_crypto_config_accel_ecc_some_curves 0
}
# Auxiliary function to build config for all EC based algorithms (EC-JPAKE,
# ECDH, ECDSA) with and without drivers.
# The input parameter is a boolean value which indicates:
# - 0 keep built-in EC algs,
# - 1 exclude built-in EC algs (driver only).
#
# This is used by the two following components to ensure they always use the
# same config, except for the use of driver or built-in EC algorithms:
# - component_test_psa_crypto_config_accel_ecc_ecp_light_only;
# - component_test_psa_crypto_config_reference_ecc_ecp_light_only.
# This supports comparing their test coverage with analyze_outcomes.py.
config_psa_crypto_config_ecp_light_only () {
driver_only="$1"
# start with config full for maximum coverage (also enables USE_PSA)
helper_libtestdriver1_adjust_config "full"
if [ "$driver_only" -eq 1 ]; then
# Disable modules that are accelerated
scripts/config.py unset MBEDTLS_ECDSA_C
scripts/config.py unset MBEDTLS_ECDH_C
scripts/config.py unset MBEDTLS_ECJPAKE_C
scripts/config.py unset MBEDTLS_ECP_C
fi
# Restartable feature is not yet supported by PSA. Once it will in
# the future, the following line could be removed (see issues
# 6061, 6332 and following ones)
scripts/config.py unset MBEDTLS_ECP_RESTARTABLE
}
# Keep in sync with component_test_psa_crypto_config_reference_ecc_ecp_light_only
component_test_psa_crypto_config_accel_ecc_ecp_light_only () {
msg "build: full with accelerated EC algs"
# Algorithms and key types to accelerate
loc_accel_list="ALG_ECDSA ALG_DETERMINISTIC_ECDSA \
ALG_ECDH \
ALG_JPAKE \
$(helper_get_psa_key_type_list "ECC") \
$(helper_get_psa_curve_list)"
# Configure
# ---------
# Use the same config as reference, only without built-in EC algs
config_psa_crypto_config_ecp_light_only 1
# Do not disable builtin curves because that support is required for:
# - MBEDTLS_PK_PARSE_EC_EXTENDED
# - MBEDTLS_PK_PARSE_EC_COMPRESSED
# Build
# -----
# These hashes are needed for some ECDSA signature tests.
loc_extra_list="ALG_SHA_1 ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512 \
ALG_SHA3_224 ALG_SHA3_256 ALG_SHA3_384 ALG_SHA3_512"
helper_libtestdriver1_make_drivers "$loc_accel_list" "$loc_extra_list"
helper_libtestdriver1_make_main "$loc_accel_list"
# Make sure any built-in EC alg was not re-enabled by accident (additive config)
not grep mbedtls_ecdsa_ ${BUILTIN_SRC_PATH}/ecdsa.o
not grep mbedtls_ecdh_ ${BUILTIN_SRC_PATH}/ecdh.o
not grep mbedtls_ecjpake_ ${BUILTIN_SRC_PATH}/ecjpake.o
not grep mbedtls_ecp_mul ${BUILTIN_SRC_PATH}/ecp.o
# Run the tests
# -------------
msg "test suites: full with accelerated EC algs"
make test
msg "ssl-opt: full with accelerated EC algs"
tests/ssl-opt.sh
}
# Keep in sync with component_test_psa_crypto_config_accel_ecc_ecp_light_only
component_test_psa_crypto_config_reference_ecc_ecp_light_only () {
msg "build: MBEDTLS_PSA_CRYPTO_CONFIG with non-accelerated EC algs"
config_psa_crypto_config_ecp_light_only 0
make
msg "test suites: full with non-accelerated EC algs"
make test
msg "ssl-opt: full with non-accelerated EC algs"
tests/ssl-opt.sh
}
# This helper function is used by:
# - component_test_psa_crypto_config_accel_ecc_no_ecp_at_all()
# - component_test_psa_crypto_config_reference_ecc_no_ecp_at_all()
# to ensure that both tests use the same underlying configuration when testing
# driver's coverage with analyze_outcomes.py.
#
# This functions accepts 1 boolean parameter as follows:
# - 1: building with accelerated EC algorithms (ECDSA, ECDH, ECJPAKE), therefore
# excluding their built-in implementation as well as ECP_C & ECP_LIGHT
# - 0: include built-in implementation of EC algorithms.
#
# PK_C and RSA_C are always disabled to ensure there is no remaining dependency
# on the ECP module.
config_psa_crypto_no_ecp_at_all () {
driver_only="$1"
# start with full config for maximum coverage (also enables USE_PSA)
helper_libtestdriver1_adjust_config "full"
if [ "$driver_only" -eq 1 ]; then
# Disable modules that are accelerated
scripts/config.py unset MBEDTLS_ECDSA_C
scripts/config.py unset MBEDTLS_ECDH_C
scripts/config.py unset MBEDTLS_ECJPAKE_C
# Disable ECP module (entirely)
scripts/config.py unset MBEDTLS_ECP_C
fi
# Disable all the features that auto-enable ECP_LIGHT (see build_info.h)
scripts/config.py unset MBEDTLS_PK_PARSE_EC_EXTENDED
scripts/config.py unset MBEDTLS_PK_PARSE_EC_COMPRESSED
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_DERIVE
# Restartable feature is not yet supported by PSA. Once it will in
# the future, the following line could be removed (see issues
# 6061, 6332 and following ones)
scripts/config.py unset MBEDTLS_ECP_RESTARTABLE
}
# Build and test a configuration where driver accelerates all EC algs while
# all support and dependencies from ECP and ECP_LIGHT are removed on the library
# side.
#
# Keep in sync with component_test_psa_crypto_config_reference_ecc_no_ecp_at_all()
component_test_psa_crypto_config_accel_ecc_no_ecp_at_all () {
msg "build: full + accelerated EC algs - ECP"
# Algorithms and key types to accelerate
loc_accel_list="ALG_ECDSA ALG_DETERMINISTIC_ECDSA \
ALG_ECDH \
ALG_JPAKE \
$(helper_get_psa_key_type_list "ECC") \
$(helper_get_psa_curve_list)"
# Configure
# ---------
# Set common configurations between library's and driver's builds
config_psa_crypto_no_ecp_at_all 1
# Disable all the builtin curves. All the required algs are accelerated.
helper_disable_builtin_curves
# Build
# -----
# Things we wanted supported in libtestdriver1, but not accelerated in the main library:
# SHA-1 and all SHA-2/3 variants, as they are used by ECDSA deterministic.
loc_extra_list="ALG_SHA_1 ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512 \
ALG_SHA3_224 ALG_SHA3_256 ALG_SHA3_384 ALG_SHA3_512"
helper_libtestdriver1_make_drivers "$loc_accel_list" "$loc_extra_list"
helper_libtestdriver1_make_main "$loc_accel_list"
# Make sure any built-in EC alg was not re-enabled by accident (additive config)
not grep mbedtls_ecdsa_ ${BUILTIN_SRC_PATH}/ecdsa.o
not grep mbedtls_ecdh_ ${BUILTIN_SRC_PATH}/ecdh.o
not grep mbedtls_ecjpake_ ${BUILTIN_SRC_PATH}/ecjpake.o
# Also ensure that ECP module was not re-enabled
not grep mbedtls_ecp_ ${BUILTIN_SRC_PATH}/ecp.o
# Run the tests
# -------------
msg "test: full + accelerated EC algs - ECP"
make test
msg "ssl-opt: full + accelerated EC algs - ECP"
tests/ssl-opt.sh
}
# Reference function used for driver's coverage analysis in analyze_outcomes.py
# in conjunction with component_test_psa_crypto_config_accel_ecc_no_ecp_at_all().
# Keep in sync with its accelerated counterpart.
component_test_psa_crypto_config_reference_ecc_no_ecp_at_all () {
msg "build: full + non accelerated EC algs"
config_psa_crypto_no_ecp_at_all 0
make
msg "test: full + non accelerated EC algs"
make test
msg "ssl-opt: full + non accelerated EC algs"
tests/ssl-opt.sh
}
# This is a common configuration helper used directly from:
# - common_test_psa_crypto_config_accel_ecc_ffdh_no_bignum
# - common_test_psa_crypto_config_reference_ecc_ffdh_no_bignum
# and indirectly from:
# - component_test_psa_crypto_config_accel_ecc_no_bignum
# - accelerate all EC algs, disable RSA and FFDH
# - component_test_psa_crypto_config_reference_ecc_no_bignum
# - this is the reference component of the above
# - it still disables RSA and FFDH, but it uses builtin EC algs
# - component_test_psa_crypto_config_accel_ecc_ffdh_no_bignum
# - accelerate all EC and FFDH algs, disable only RSA
# - component_test_psa_crypto_config_reference_ecc_ffdh_no_bignum
# - this is the reference component of the above
# - it still disables RSA, but it uses builtin EC and FFDH algs
#
# This function accepts 2 parameters:
# $1: a boolean value which states if we are testing an accelerated scenario
# or not.
# $2: a string value which states which components are tested. Allowed values
# are "ECC" or "ECC_DH".
config_psa_crypto_config_accel_ecc_ffdh_no_bignum() {
driver_only="$1"
test_target="$2"
# start with full config for maximum coverage (also enables USE_PSA)
helper_libtestdriver1_adjust_config "full"
if [ "$driver_only" -eq 1 ]; then
# Disable modules that are accelerated
scripts/config.py unset MBEDTLS_ECDSA_C
scripts/config.py unset MBEDTLS_ECDH_C
scripts/config.py unset MBEDTLS_ECJPAKE_C
# Disable ECP module (entirely)
scripts/config.py unset MBEDTLS_ECP_C
# Also disable bignum
scripts/config.py unset MBEDTLS_BIGNUM_C
fi
# Disable all the features that auto-enable ECP_LIGHT (see build_info.h)
scripts/config.py unset MBEDTLS_PK_PARSE_EC_EXTENDED
scripts/config.py unset MBEDTLS_PK_PARSE_EC_COMPRESSED
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_DERIVE
# RSA support is intentionally disabled on this test because RSA_C depends
# on BIGNUM_C.
scripts/config.py -f "$CRYPTO_CONFIG_H" unset-all "PSA_WANT_KEY_TYPE_RSA_[0-9A-Z_a-z]*"
scripts/config.py -f "$CRYPTO_CONFIG_H" unset-all "PSA_WANT_ALG_RSA_[0-9A-Z_a-z]*"
scripts/config.py unset MBEDTLS_RSA_C
scripts/config.py unset MBEDTLS_PKCS1_V15
scripts/config.py unset MBEDTLS_PKCS1_V21
scripts/config.py unset MBEDTLS_X509_RSASSA_PSS_SUPPORT
# Also disable key exchanges that depend on RSA
scripts/config.py unset MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED
scripts/config.py unset MBEDTLS_KEY_EXCHANGE_RSA_ENABLED
scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED
scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED
scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED
if [ "$test_target" = "ECC" ]; then
# When testing ECC only, we disable FFDH support, both from builtin and
# PSA sides, and also disable the key exchanges that depend on DHM.
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_FFDH
scripts/config.py -f "$CRYPTO_CONFIG_H" unset-all "PSA_WANT_KEY_TYPE_DH_[0-9A-Z_a-z]*"
scripts/config.py -f "$CRYPTO_CONFIG_H" unset-all "PSA_WANT_DH_RFC7919_[0-9]*"
scripts/config.py unset MBEDTLS_DHM_C
scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED
scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED
else
# When testing ECC and DH instead, we disable DHM and depending key
# exchanges only in the accelerated build
if [ "$driver_only" -eq 1 ]; then
scripts/config.py unset MBEDTLS_DHM_C
scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED
scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED
fi
fi
# Restartable feature is not yet supported by PSA. Once it will in
# the future, the following line could be removed (see issues
# 6061, 6332 and following ones)
scripts/config.py unset MBEDTLS_ECP_RESTARTABLE
}
# Common helper used by:
# - component_test_psa_crypto_config_accel_ecc_no_bignum
# - component_test_psa_crypto_config_accel_ecc_ffdh_no_bignum
#
# The goal is to build and test accelerating either:
# - ECC only or
# - both ECC and FFDH
#
# It is meant to be used in conjunction with
# common_test_psa_crypto_config_reference_ecc_ffdh_no_bignum() for drivers
# coverage analysis in the "analyze_outcomes.py" script.
common_test_psa_crypto_config_accel_ecc_ffdh_no_bignum () {
test_target="$1"
# This is an internal helper to simplify text message handling
if [ "$test_target" = "ECC_DH" ]; then
accel_text="ECC/FFDH"
removed_text="ECP - DH"
else
accel_text="ECC"
removed_text="ECP"
fi
msg "build: full + accelerated $accel_text algs + USE_PSA - $removed_text - BIGNUM"
# By default we accelerate all EC keys/algs
loc_accel_list="ALG_ECDSA ALG_DETERMINISTIC_ECDSA \
ALG_ECDH \
ALG_JPAKE \
$(helper_get_psa_key_type_list "ECC") \
$(helper_get_psa_curve_list)"
# Optionally we can also add DH to the list of accelerated items
if [ "$test_target" = "ECC_DH" ]; then
loc_accel_list="$loc_accel_list \
ALG_FFDH \
$(helper_get_psa_key_type_list "DH") \
$(helper_get_psa_dh_group_list)"
fi
# Configure
# ---------
# Set common configurations between library's and driver's builds
config_psa_crypto_config_accel_ecc_ffdh_no_bignum 1 "$test_target"
# Disable all the builtin curves. All the required algs are accelerated.
helper_disable_builtin_curves
# Build
# -----
# Things we wanted supported in libtestdriver1, but not accelerated in the main library:
# SHA-1 and all SHA-2/3 variants, as they are used by ECDSA deterministic.
loc_extra_list="ALG_SHA_1 ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512 \
ALG_SHA3_224 ALG_SHA3_256 ALG_SHA3_384 ALG_SHA3_512"
helper_libtestdriver1_make_drivers "$loc_accel_list" "$loc_extra_list"
helper_libtestdriver1_make_main "$loc_accel_list"
# Make sure any built-in EC alg was not re-enabled by accident (additive config)
not grep mbedtls_ecdsa_ ${BUILTIN_SRC_PATH}/ecdsa.o
not grep mbedtls_ecdh_ ${BUILTIN_SRC_PATH}/ecdh.o
not grep mbedtls_ecjpake_ ${BUILTIN_SRC_PATH}/ecjpake.o
# Also ensure that ECP, RSA, [DHM] or BIGNUM modules were not re-enabled
not grep mbedtls_ecp_ ${BUILTIN_SRC_PATH}/ecp.o
not grep mbedtls_rsa_ ${BUILTIN_SRC_PATH}/rsa.o
not grep mbedtls_mpi_ ${BUILTIN_SRC_PATH}/bignum.o
not grep mbedtls_dhm_ ${BUILTIN_SRC_PATH}/dhm.o
# Run the tests
# -------------
msg "test suites: full + accelerated $accel_text algs + USE_PSA - $removed_text - DHM - BIGNUM"
make test
msg "ssl-opt: full + accelerated $accel_text algs + USE_PSA - $removed_text - BIGNUM"
tests/ssl-opt.sh
}
# Common helper used by:
# - component_test_psa_crypto_config_reference_ecc_no_bignum
# - component_test_psa_crypto_config_reference_ecc_ffdh_no_bignum
#
# The goal is to build and test a reference scenario (i.e. with builtin
# components) compared to the ones used in
# common_test_psa_crypto_config_accel_ecc_ffdh_no_bignum() above.
#
# It is meant to be used in conjunction with
# common_test_psa_crypto_config_accel_ecc_ffdh_no_bignum() for drivers'
# coverage analysis in "analyze_outcomes.py" script.
common_test_psa_crypto_config_reference_ecc_ffdh_no_bignum () {
test_target="$1"
# This is an internal helper to simplify text message handling
if [ "$test_target" = "ECC_DH" ]; then
accel_text="ECC/FFDH"
else
accel_text="ECC"
fi
msg "build: full + non accelerated $accel_text algs + USE_PSA"
config_psa_crypto_config_accel_ecc_ffdh_no_bignum 0 "$test_target"
make
msg "test suites: full + non accelerated EC algs + USE_PSA"
make test
msg "ssl-opt: full + non accelerated $accel_text algs + USE_PSA"
tests/ssl-opt.sh
}
component_test_psa_crypto_config_accel_ecc_no_bignum () {
common_test_psa_crypto_config_accel_ecc_ffdh_no_bignum "ECC"
}
component_test_psa_crypto_config_reference_ecc_no_bignum () {
common_test_psa_crypto_config_reference_ecc_ffdh_no_bignum "ECC"
}
component_test_psa_crypto_config_accel_ecc_ffdh_no_bignum () {
common_test_psa_crypto_config_accel_ecc_ffdh_no_bignum "ECC_DH"
}
component_test_psa_crypto_config_reference_ecc_ffdh_no_bignum () {
common_test_psa_crypto_config_reference_ecc_ffdh_no_bignum "ECC_DH"
}
# Helper for setting common configurations between:
# - component_test_tfm_config_p256m_driver_accel_ec()
# - component_test_tfm_config()
common_tfm_config () {
# Enable TF-M config
cp configs/config-tfm.h "$CONFIG_H"
echo "#undef MBEDTLS_PSA_CRYPTO_CONFIG_FILE" >> "$CONFIG_H"
cp configs/ext/crypto_config_profile_medium.h "$CRYPTO_CONFIG_H"
# Other config adjustment to make the tests pass.
# This should probably be adopted upstream.
#
# - USE_PSA_CRYPTO for PK_HAVE_ECC_KEYS
echo "#define MBEDTLS_USE_PSA_CRYPTO" >> "$CONFIG_H"
# Config adjustment for better test coverage in our environment.
# This is not needed just to build and pass tests.
#
# Enable filesystem I/O for the benefit of PK parse/write tests.
echo "#define MBEDTLS_FS_IO" >> "$CONFIG_H"
}
# Keep this in sync with component_test_tfm_config() as they are both meant
# to be used in analyze_outcomes.py for driver's coverage analysis.
component_test_tfm_config_p256m_driver_accel_ec () {
msg "build: TF-M config + p256m driver + accel ECDH(E)/ECDSA"
common_tfm_config
# Build crypto library
make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -I../tests/include/spe" LDFLAGS="$ASAN_CFLAGS"
# Make sure any built-in EC alg was not re-enabled by accident (additive config)
not grep mbedtls_ecdsa_ ${BUILTIN_SRC_PATH}/ecdsa.o
not grep mbedtls_ecdh_ ${BUILTIN_SRC_PATH}/ecdh.o
not grep mbedtls_ecjpake_ ${BUILTIN_SRC_PATH}/ecjpake.o
# Also ensure that ECP, RSA, DHM or BIGNUM modules were not re-enabled
not grep mbedtls_ecp_ ${BUILTIN_SRC_PATH}/ecp.o
not grep mbedtls_rsa_ ${BUILTIN_SRC_PATH}/rsa.o
not grep mbedtls_dhm_ ${BUILTIN_SRC_PATH}/dhm.o
not grep mbedtls_mpi_ ${BUILTIN_SRC_PATH}/bignum.o
# Check that p256m was built
grep -q p256_ecdsa_ library/libmbedcrypto.a
# In "config-tfm.h" we disabled CIPHER_C tweaking TF-M's configuration
# files, so we want to ensure that it has not be re-enabled accidentally.
not grep mbedtls_cipher ${BUILTIN_SRC_PATH}/cipher.o
# Run the tests
msg "test: TF-M config + p256m driver + accel ECDH(E)/ECDSA"
make test
}
# Keep this in sync with component_test_tfm_config_p256m_driver_accel_ec() as
# they are both meant to be used in analyze_outcomes.py for driver's coverage
# analysis.
component_test_tfm_config() {
common_tfm_config
# Disable P256M driver, which is on by default, so that analyze_outcomes
# can compare this test with test_tfm_config_p256m_driver_accel_ec
echo "#undef MBEDTLS_PSA_P256M_DRIVER_ENABLED" >> "$CONFIG_H"
msg "build: TF-M config"
make CFLAGS='-Werror -Wall -Wextra -I../tests/include/spe' tests
# Check that p256m was not built
not grep p256_ecdsa_ library/libmbedcrypto.a
# In "config-tfm.h" we disabled CIPHER_C tweaking TF-M's configuration
# files, so we want to ensure that it has not be re-enabled accidentally.
not grep mbedtls_cipher ${BUILTIN_SRC_PATH}/cipher.o
msg "test: TF-M config"
make test
}
# Common helper for component_full_without_ecdhe_ecdsa() and
# component_full_without_ecdhe_ecdsa_and_tls13() which:
# - starts from the "full" configuration minus the list of symbols passed in
# as 1st parameter
# - build
# - test only TLS (i.e. test_suite_tls and ssl-opt)
build_full_minus_something_and_test_tls () {
symbols_to_disable="$1"
msg "build: full minus something, test TLS"
scripts/config.py full
for sym in $symbols_to_disable; do
echo "Disabling $sym"
scripts/config.py unset $sym
done
make
msg "test: full minus something, test TLS"
( cd tests; ./test_suite_ssl )
msg "ssl-opt: full minus something, test TLS"
tests/ssl-opt.sh
}
component_full_without_ecdhe_ecdsa () {
build_full_minus_something_and_test_tls "MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED"
}
component_full_without_ecdhe_ecdsa_and_tls13 () {
build_full_minus_something_and_test_tls "MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
MBEDTLS_SSL_PROTO_TLS1_3"
}
# This is an helper used by:
# - component_test_psa_ecc_key_pair_no_derive
# - component_test_psa_ecc_key_pair_no_generate
# The goal is to test with all PSA_WANT_KEY_TYPE_xxx_KEY_PAIR_yyy symbols
# enabled, but one. Input arguments are as follows:
# - $1 is the key type under test, i.e. ECC/RSA/DH
# - $2 is the key option to be unset (i.e. generate, derive, etc)
build_and_test_psa_want_key_pair_partial() {
key_type=$1
unset_option=$2
disabled_psa_want="PSA_WANT_KEY_TYPE_${key_type}_KEY_PAIR_${unset_option}"
msg "build: full - MBEDTLS_USE_PSA_CRYPTO - ${disabled_psa_want}"
scripts/config.py full
scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
# All the PSA_WANT_KEY_TYPE_xxx_KEY_PAIR_yyy are enabled by default in
# crypto_config.h so we just disable the one we don't want.
scripts/config.py -f "$CRYPTO_CONFIG_H" unset "$disabled_psa_want"
make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS" LDFLAGS="$ASAN_CFLAGS"
msg "test: full - MBEDTLS_USE_PSA_CRYPTO - ${disabled_psa_want}"
make test
}
component_test_psa_ecc_key_pair_no_derive() {
build_and_test_psa_want_key_pair_partial "ECC" "DERIVE"
}
component_test_psa_ecc_key_pair_no_generate() {
build_and_test_psa_want_key_pair_partial "ECC" "GENERATE"
}
config_psa_crypto_accel_rsa () {
driver_only=$1
# Start from crypto_full config (no X.509, no TLS)
helper_libtestdriver1_adjust_config "crypto_full"
if [ "$driver_only" -eq 1 ]; then
# Remove RSA support and its dependencies
scripts/config.py unset MBEDTLS_RSA_C
scripts/config.py unset MBEDTLS_PKCS1_V15
scripts/config.py unset MBEDTLS_PKCS1_V21
# We need PEM parsing in the test library as well to support the import
# of PEM encoded RSA keys.
scripts/config.py -f "$CONFIG_TEST_DRIVER_H" set MBEDTLS_PEM_PARSE_C
scripts/config.py -f "$CONFIG_TEST_DRIVER_H" set MBEDTLS_BASE64_C
fi
}
component_test_psa_crypto_config_accel_rsa_crypto () {
msg "build: crypto_full with accelerated RSA"
loc_accel_list="ALG_RSA_OAEP ALG_RSA_PSS \
ALG_RSA_PKCS1V15_CRYPT ALG_RSA_PKCS1V15_SIGN \
KEY_TYPE_RSA_PUBLIC_KEY \
KEY_TYPE_RSA_KEY_PAIR_BASIC \
KEY_TYPE_RSA_KEY_PAIR_GENERATE \
KEY_TYPE_RSA_KEY_PAIR_IMPORT \
KEY_TYPE_RSA_KEY_PAIR_EXPORT"
# Configure
# ---------
config_psa_crypto_accel_rsa 1
# Build
# -----
# These hashes are needed for unit tests.
loc_extra_list="ALG_SHA_1 ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512 \
ALG_SHA3_224 ALG_SHA3_256 ALG_SHA3_384 ALG_SHA3_512 ALG_MD5"
helper_libtestdriver1_make_drivers "$loc_accel_list" "$loc_extra_list"
helper_libtestdriver1_make_main "$loc_accel_list"
# Make sure this was not re-enabled by accident (additive config)
not grep mbedtls_rsa ${BUILTIN_SRC_PATH}/rsa.o
# Run the tests
# -------------
msg "test: crypto_full with accelerated RSA"
make test
}
component_test_psa_crypto_config_reference_rsa_crypto () {
msg "build: crypto_full with non-accelerated RSA"
# Configure
# ---------
config_psa_crypto_accel_rsa 0
# Build
# -----
make
# Run the tests
# -------------
msg "test: crypto_full with non-accelerated RSA"
make test
}
# This is a temporary test to verify that full RSA support is present even when
# only one single new symbols (PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_BASIC) is defined.
component_test_new_psa_want_key_pair_symbol() {
msg "Build: crypto config - MBEDTLS_RSA_C + PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_BASIC"
# Create a temporary output file unless there is already one set
if [ "$MBEDTLS_TEST_OUTCOME_FILE" ]; then
REMOVE_OUTCOME_ON_EXIT="no"
else
REMOVE_OUTCOME_ON_EXIT="yes"
MBEDTLS_TEST_OUTCOME_FILE="$PWD/out.csv"
export MBEDTLS_TEST_OUTCOME_FILE
fi
# Start from crypto configuration
scripts/config.py crypto
# Remove RSA support and its dependencies
scripts/config.py unset MBEDTLS_PKCS1_V15
scripts/config.py unset MBEDTLS_PKCS1_V21
scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED
scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED
scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED
scripts/config.py unset MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED
scripts/config.py unset MBEDTLS_KEY_EXCHANGE_RSA_ENABLED
scripts/config.py unset MBEDTLS_RSA_C
scripts/config.py unset MBEDTLS_X509_RSASSA_PSS_SUPPORT
# Enable PSA support
scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG
# Keep only PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_BASIC enabled in order to ensure
# that proper translations is done in crypto_legacy.h.
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_IMPORT
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_EXPORT
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_GENERATE
make
msg "Test: crypto config - MBEDTLS_RSA_C + PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_BASIC"
make test
# Parse only 1 relevant line from the outcome file, i.e. a test which is
# performing RSA signature.
msg "Verify that 'RSA PKCS1 Sign #1 (SHA512, 1536 bits RSA)' is PASS"
cat $MBEDTLS_TEST_OUTCOME_FILE | grep 'RSA PKCS1 Sign #1 (SHA512, 1536 bits RSA)' | grep -q "PASS"
if [ "$REMOVE_OUTCOME_ON_EXIT" == "yes" ]; then
rm $MBEDTLS_TEST_OUTCOME_FILE
fi
}
component_test_psa_crypto_config_accel_hash () {
msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated hash"
loc_accel_list="ALG_MD5 ALG_RIPEMD160 ALG_SHA_1 \
ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512 \
ALG_SHA3_224 ALG_SHA3_256 ALG_SHA3_384 ALG_SHA3_512"
# Configure
# ---------
# Start from default config (no USE_PSA)
helper_libtestdriver1_adjust_config "default"
# Disable the things that are being accelerated
scripts/config.py unset MBEDTLS_MD5_C
scripts/config.py unset MBEDTLS_RIPEMD160_C
scripts/config.py unset MBEDTLS_SHA1_C
scripts/config.py unset MBEDTLS_SHA224_C
scripts/config.py unset MBEDTLS_SHA256_C
scripts/config.py unset MBEDTLS_SHA384_C
scripts/config.py unset MBEDTLS_SHA512_C
scripts/config.py unset MBEDTLS_SHA3_C
# Build
# -----
helper_libtestdriver1_make_drivers "$loc_accel_list"
helper_libtestdriver1_make_main "$loc_accel_list"
# There's a risk of something getting re-enabled via config_psa.h;
# make sure it did not happen. Note: it's OK for MD_C to be enabled.
not grep mbedtls_md5 ${BUILTIN_SRC_PATH}/md5.o
not grep mbedtls_sha1 ${BUILTIN_SRC_PATH}/sha1.o
not grep mbedtls_sha256 ${BUILTIN_SRC_PATH}/sha256.o
not grep mbedtls_sha512 ${BUILTIN_SRC_PATH}/sha512.o
not grep mbedtls_ripemd160 ${BUILTIN_SRC_PATH}/ripemd160.o
# Run the tests
# -------------
msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated hash"
make test
}
# Auxiliary function to build config for hashes with and without drivers
config_psa_crypto_hash_use_psa () {
driver_only="$1"
# start with config full for maximum coverage (also enables USE_PSA)
helper_libtestdriver1_adjust_config "full"
if [ "$driver_only" -eq 1 ]; then
# disable the built-in implementation of hashes
scripts/config.py unset MBEDTLS_MD5_C
scripts/config.py unset MBEDTLS_RIPEMD160_C
scripts/config.py unset MBEDTLS_SHA1_C
scripts/config.py unset MBEDTLS_SHA224_C
scripts/config.py unset MBEDTLS_SHA256_C # see external RNG below
scripts/config.py unset MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_IF_PRESENT
scripts/config.py unset MBEDTLS_SHA384_C
scripts/config.py unset MBEDTLS_SHA512_C
scripts/config.py unset MBEDTLS_SHA512_USE_A64_CRYPTO_IF_PRESENT
scripts/config.py unset MBEDTLS_SHA3_C
fi
}
# Note that component_test_psa_crypto_config_reference_hash_use_psa
# is related to this component and both components need to be kept in sync.
# For details please see comments for component_test_psa_crypto_config_reference_hash_use_psa.
component_test_psa_crypto_config_accel_hash_use_psa () {
msg "test: full with accelerated hashes"
loc_accel_list="ALG_MD5 ALG_RIPEMD160 ALG_SHA_1 \
ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512 \
ALG_SHA3_224 ALG_SHA3_256 ALG_SHA3_384 ALG_SHA3_512"
# Configure
# ---------
config_psa_crypto_hash_use_psa 1
# Build
# -----
helper_libtestdriver1_make_drivers "$loc_accel_list"
helper_libtestdriver1_make_main "$loc_accel_list"
# There's a risk of something getting re-enabled via config_psa.h;
# make sure it did not happen. Note: it's OK for MD_C to be enabled.
not grep mbedtls_md5 ${BUILTIN_SRC_PATH}/md5.o
not grep mbedtls_sha1 ${BUILTIN_SRC_PATH}/sha1.o
not grep mbedtls_sha256 ${BUILTIN_SRC_PATH}/sha256.o
not grep mbedtls_sha512 ${BUILTIN_SRC_PATH}/sha512.o
not grep mbedtls_ripemd160 ${BUILTIN_SRC_PATH}/ripemd160.o
# Run the tests
# -------------
msg "test: full with accelerated hashes"
make test
# This is mostly useful so that we can later compare outcome files with
# the reference config in analyze_outcomes.py, to check that the
# dependency declarations in ssl-opt.sh and in TLS code are correct.
msg "test: ssl-opt.sh, full with accelerated hashes"
tests/ssl-opt.sh
# This is to make sure all ciphersuites are exercised, but we don't need
# interop testing (besides, we already got some from ssl-opt.sh).
msg "test: compat.sh, full with accelerated hashes"
tests/compat.sh -p mbedTLS -V YES
}
# This component provides reference configuration for test_psa_crypto_config_accel_hash_use_psa
# without accelerated hash. The outcome from both components are used by the analyze_outcomes.py
# script to find regression in test coverage when accelerated hash is used (tests and ssl-opt).
# Both components need to be kept in sync.
component_test_psa_crypto_config_reference_hash_use_psa() {
msg "test: full without accelerated hashes"
config_psa_crypto_hash_use_psa 0
make
msg "test: full without accelerated hashes"
make test
msg "test: ssl-opt.sh, full without accelerated hashes"
tests/ssl-opt.sh
}
# Auxiliary function to build config for hashes with and without drivers
config_psa_crypto_hmac_use_psa () {
driver_only="$1"
# start with config full for maximum coverage (also enables USE_PSA)
helper_libtestdriver1_adjust_config "full"
if [ "$driver_only" -eq 1 ]; then
# Disable MD_C in order to disable the builtin support for HMAC. MD_LIGHT
# is still enabled though (for ENTROPY_C among others).
scripts/config.py unset MBEDTLS_MD_C
# Disable also the builtin hashes since they are supported by the driver
# and MD module is able to perform PSA dispathing.
scripts/config.py unset-all MBEDTLS_SHA
scripts/config.py unset MBEDTLS_MD5_C
scripts/config.py unset MBEDTLS_RIPEMD160_C
fi
# Direct dependencies of MD_C. We disable them also in the reference
# component to work with the same set of features.
scripts/config.py unset MBEDTLS_PKCS7_C
scripts/config.py unset MBEDTLS_PKCS5_C
scripts/config.py unset MBEDTLS_HMAC_DRBG_C
scripts/config.py unset MBEDTLS_HKDF_C
# Dependencies of HMAC_DRBG
scripts/config.py unset MBEDTLS_ECDSA_DETERMINISTIC
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_DETERMINISTIC_ECDSA
}
component_test_psa_crypto_config_accel_hmac() {
msg "test: full with accelerated hmac"
loc_accel_list="ALG_HMAC KEY_TYPE_HMAC \
ALG_MD5 ALG_RIPEMD160 ALG_SHA_1 \
ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512 \
ALG_SHA3_224 ALG_SHA3_256 ALG_SHA3_384 ALG_SHA3_512"
# Configure
# ---------
config_psa_crypto_hmac_use_psa 1
# Build
# -----
helper_libtestdriver1_make_drivers "$loc_accel_list"
helper_libtestdriver1_make_main "$loc_accel_list"
# Ensure that built-in support for HMAC is disabled.
not grep mbedtls_md_hmac ${BUILTIN_SRC_PATH}/md.o
# Run the tests
# -------------
msg "test: full with accelerated hmac"
make test
}
component_test_psa_crypto_config_reference_hmac() {
msg "test: full without accelerated hmac"
config_psa_crypto_hmac_use_psa 0
make
msg "test: full without accelerated hmac"
make test
}
component_test_psa_crypto_config_accel_des () {
msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated DES"
# Albeit this components aims at accelerating DES which should only support
# CBC and ECB modes, we need to accelerate more than that otherwise DES_C
# would automatically be re-enabled by "config_adjust_legacy_from_psa.c"
loc_accel_list="ALG_ECB_NO_PADDING ALG_CBC_NO_PADDING ALG_CBC_PKCS7 \
ALG_CTR ALG_CFB ALG_OFB ALG_XTS ALG_CMAC \
KEY_TYPE_DES"
# Note: we cannot accelerate all ciphers' key types otherwise we would also
# have to either disable CCM/GCM or accelerate them, but that's out of scope
# of this component. This limitation will be addressed by #8598.
# Configure
# ---------
# Start from the full config
helper_libtestdriver1_adjust_config "full"
# Disable the things that are being accelerated
scripts/config.py unset MBEDTLS_CIPHER_MODE_CBC
scripts/config.py unset MBEDTLS_CIPHER_PADDING_PKCS7
scripts/config.py unset MBEDTLS_CIPHER_MODE_CTR
scripts/config.py unset MBEDTLS_CIPHER_MODE_CFB
scripts/config.py unset MBEDTLS_CIPHER_MODE_OFB
scripts/config.py unset MBEDTLS_CIPHER_MODE_XTS
scripts/config.py unset MBEDTLS_DES_C
scripts/config.py unset MBEDTLS_CMAC_C
# Build
# -----
helper_libtestdriver1_make_drivers "$loc_accel_list"
helper_libtestdriver1_make_main "$loc_accel_list"
# Make sure this was not re-enabled by accident (additive config)
not grep mbedtls_des* ${BUILTIN_SRC_PATH}/des.o
# Run the tests
# -------------
msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated DES"
make test
}
component_test_psa_crypto_config_accel_aead () {
msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated AEAD"
loc_accel_list="ALG_GCM ALG_CCM ALG_CHACHA20_POLY1305 \
KEY_TYPE_AES KEY_TYPE_CHACHA20 KEY_TYPE_ARIA KEY_TYPE_CAMELLIA"
# Configure
# ---------
# Start from full config
helper_libtestdriver1_adjust_config "full"
# Disable things that are being accelerated
scripts/config.py unset MBEDTLS_GCM_C
scripts/config.py unset MBEDTLS_CCM_C
scripts/config.py unset MBEDTLS_CHACHAPOLY_C
# Disable CCM_STAR_NO_TAG because this re-enables CCM_C.
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CCM_STAR_NO_TAG
# Build
# -----
helper_libtestdriver1_make_drivers "$loc_accel_list"
helper_libtestdriver1_make_main "$loc_accel_list"
# Make sure this was not re-enabled by accident (additive config)
not grep mbedtls_ccm ${BUILTIN_SRC_PATH}/ccm.o
not grep mbedtls_gcm ${BUILTIN_SRC_PATH}/gcm.o
not grep mbedtls_chachapoly ${BUILTIN_SRC_PATH}/chachapoly.o
# Run the tests
# -------------
msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated AEAD"
make test
}
# This is a common configuration function used in:
# - component_test_psa_crypto_config_accel_cipher_aead_cmac
# - component_test_psa_crypto_config_reference_cipher_aead_cmac
common_psa_crypto_config_accel_cipher_aead_cmac() {
# Start from the full config
helper_libtestdriver1_adjust_config "full"
scripts/config.py unset MBEDTLS_NIST_KW_C
}
# The 2 following test components, i.e.
# - component_test_psa_crypto_config_accel_cipher_aead_cmac
# - component_test_psa_crypto_config_reference_cipher_aead_cmac
# are meant to be used together in analyze_outcomes.py script in order to test
# driver's coverage for ciphers and AEADs.
component_test_psa_crypto_config_accel_cipher_aead_cmac () {
msg "build: full config with accelerated cipher inc. AEAD and CMAC"
loc_accel_list="ALG_ECB_NO_PADDING ALG_CBC_NO_PADDING ALG_CBC_PKCS7 ALG_CTR ALG_CFB \
ALG_OFB ALG_XTS ALG_STREAM_CIPHER ALG_CCM_STAR_NO_TAG \
ALG_GCM ALG_CCM ALG_CHACHA20_POLY1305 ALG_CMAC \
KEY_TYPE_DES KEY_TYPE_AES KEY_TYPE_ARIA KEY_TYPE_CHACHA20 KEY_TYPE_CAMELLIA"
# Configure
# ---------
common_psa_crypto_config_accel_cipher_aead_cmac
# Disable the things that are being accelerated
scripts/config.py unset MBEDTLS_CIPHER_MODE_CBC
scripts/config.py unset MBEDTLS_CIPHER_PADDING_PKCS7
scripts/config.py unset MBEDTLS_CIPHER_MODE_CTR
scripts/config.py unset MBEDTLS_CIPHER_MODE_CFB
scripts/config.py unset MBEDTLS_CIPHER_MODE_OFB
scripts/config.py unset MBEDTLS_CIPHER_MODE_XTS
scripts/config.py unset MBEDTLS_GCM_C
scripts/config.py unset MBEDTLS_CCM_C
scripts/config.py unset MBEDTLS_CHACHAPOLY_C
scripts/config.py unset MBEDTLS_CMAC_C
scripts/config.py unset MBEDTLS_DES_C
scripts/config.py unset MBEDTLS_AES_C
scripts/config.py unset MBEDTLS_ARIA_C
scripts/config.py unset MBEDTLS_CHACHA20_C
scripts/config.py unset MBEDTLS_CAMELLIA_C
# Disable CIPHER_C entirely as all ciphers/AEADs are accelerated and PSA
# does not depend on it.
scripts/config.py unset MBEDTLS_CIPHER_C
# Build
# -----
helper_libtestdriver1_make_drivers "$loc_accel_list"
helper_libtestdriver1_make_main "$loc_accel_list"
# Make sure this was not re-enabled by accident (additive config)
not grep mbedtls_cipher ${BUILTIN_SRC_PATH}/cipher.o
not grep mbedtls_des ${BUILTIN_SRC_PATH}/des.o
not grep mbedtls_aes ${BUILTIN_SRC_PATH}/aes.o
not grep mbedtls_aria ${BUILTIN_SRC_PATH}/aria.o
not grep mbedtls_camellia ${BUILTIN_SRC_PATH}/camellia.o
not grep mbedtls_ccm ${BUILTIN_SRC_PATH}/ccm.o
not grep mbedtls_gcm ${BUILTIN_SRC_PATH}/gcm.o
not grep mbedtls_chachapoly ${BUILTIN_SRC_PATH}/chachapoly.o
not grep mbedtls_cmac ${BUILTIN_SRC_PATH}/cmac.o
# Run the tests
# -------------
msg "test: full config with accelerated cipher inc. AEAD and CMAC"
make test
msg "ssl-opt: full config with accelerated cipher inc. AEAD and CMAC"
tests/ssl-opt.sh
msg "compat.sh: full config with accelerated cipher inc. AEAD and CMAC"
tests/compat.sh -V NO -p mbedTLS
}
component_test_psa_crypto_config_reference_cipher_aead_cmac () {
msg "build: full config with non-accelerated cipher inc. AEAD and CMAC"
common_psa_crypto_config_accel_cipher_aead_cmac
make
msg "test: full config with non-accelerated cipher inc. AEAD and CMAC"
make test
msg "ssl-opt: full config with non-accelerated cipher inc. AEAD and CMAC"
tests/ssl-opt.sh
msg "compat.sh: full config with non-accelerated cipher inc. AEAD and CMAC"
tests/compat.sh -V NO -p mbedTLS
}
common_block_cipher_dispatch() {
TEST_WITH_DRIVER="$1"
# Start from the full config
helper_libtestdriver1_adjust_config "full"
if [ "$TEST_WITH_DRIVER" -eq 1 ]; then
# Disable key types that are accelerated (there is no legacy equivalent
# symbol for ECB)
scripts/config.py unset MBEDTLS_AES_C
scripts/config.py unset MBEDTLS_ARIA_C
scripts/config.py unset MBEDTLS_CAMELLIA_C
fi
# Disable cipher's modes that, when not accelerated, cause
# legacy key types to be re-enabled in "config_adjust_legacy_from_psa.h".
# Keep this also in the reference component in order to skip the same tests
# that were skipped in the accelerated one.
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CTR
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CFB
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_OFB
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CBC_NO_PADDING
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CBC_PKCS7
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CMAC
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CCM_STAR_NO_TAG
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_PBKDF2_AES_CMAC_PRF_128
# Disable direct dependency on AES_C
scripts/config.py unset MBEDTLS_NIST_KW_C
# Prevent the cipher module from using deprecated PSA path. The reason is
# that otherwise there will be tests relying on "aes_info" (defined in
# "cipher_wrap.c") whose functions are not available when AES_C is
# not defined. ARIA and Camellia are not a problem in this case because
# the PSA path is not tested for these key types.
scripts/config.py set MBEDTLS_DEPRECATED_REMOVED
}
component_test_full_block_cipher_psa_dispatch () {
msg "build: full + PSA dispatch in block_cipher"
loc_accel_list="ALG_ECB_NO_PADDING \
KEY_TYPE_AES KEY_TYPE_ARIA KEY_TYPE_CAMELLIA"
# Configure
# ---------
common_block_cipher_dispatch 1
# Build
# -----
helper_libtestdriver1_make_drivers "$loc_accel_list"
helper_libtestdriver1_make_main "$loc_accel_list"
# Make sure disabled components were not re-enabled by accident (additive
# config)
not grep mbedtls_aes_ ${BUILTIN_SRC_PATH}/aes.o
not grep mbedtls_aria_ ${BUILTIN_SRC_PATH}/aria.o
not grep mbedtls_camellia_ ${BUILTIN_SRC_PATH}/camellia.o
# Run the tests
# -------------
msg "test: full + PSA dispatch in block_cipher"
make test
}
# This is the reference component of component_test_full_block_cipher_psa_dispatch
component_test_full_block_cipher_legacy_dispatch () {
msg "build: full + legacy dispatch in block_cipher"
common_block_cipher_dispatch 0
make
msg "test: full + legacy dispatch in block_cipher"
make test
}
component_test_aead_chachapoly_disabled() {
msg "build: full minus CHACHAPOLY"
scripts/config.py full
scripts/config.py unset MBEDTLS_CHACHAPOLY_C
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CHACHA20_POLY1305
make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS" LDFLAGS="$ASAN_CFLAGS"
msg "test: full minus CHACHAPOLY"
make test
}
component_test_aead_only_ccm() {
msg "build: full minus CHACHAPOLY and GCM"
scripts/config.py full
scripts/config.py unset MBEDTLS_CHACHAPOLY_C
scripts/config.py unset MBEDTLS_GCM_C
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CHACHA20_POLY1305
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_GCM
make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS" LDFLAGS="$ASAN_CFLAGS"
msg "test: full minus CHACHAPOLY and GCM"
make test
}
component_test_ccm_aes_sha256() {
msg "build: CCM + AES + SHA256 configuration"
cp "$CONFIG_TEST_DRIVER_H" "$CONFIG_H"
cp configs/crypto-config-ccm-aes-sha256.h "$CRYPTO_CONFIG_H"
make
msg "test: CCM + AES + SHA256 configuration"
make test
}
component_build_tfm() {
# Check that the TF-M configuration can build cleanly with various
# warning flags enabled. We don't build or run tests, since the
# TF-M configuration needs a TF-M platform. A tweaked version of
# the configuration that works on mainstream platforms is in
# configs/config-tfm.h, tested via test-ref-configs.pl.
cp configs/config-tfm.h "$CONFIG_H"
msg "build: TF-M config, clang, armv7-m thumb2"
make lib CC="clang" CFLAGS="--target=arm-linux-gnueabihf -march=armv7-m -mthumb -Os -std=c99 -Werror -Wall -Wextra -Wwrite-strings -Wpointer-arith -Wimplicit-fallthrough -Wshadow -Wvla -Wformat=2 -Wno-format-nonliteral -Wshadow -Wasm-operand-widths -Wunused -I../tests/include/spe"
msg "build: TF-M config, gcc native build"
make clean
make lib CC="gcc" CFLAGS="-Os -std=c99 -Werror -Wall -Wextra -Wwrite-strings -Wpointer-arith -Wshadow -Wvla -Wformat=2 -Wno-format-nonliteral -Wshadow -Wformat-signedness -Wlogical-op -I../tests/include/spe"
}
# Test that the given .o file builds with all (valid) combinations of the given options.
#
# Syntax: build_test_config_combos FILE VALIDATOR_FUNCTION OPT1 OPT2 ...
#
# The validator function is the name of a function to validate the combination of options.
# It may be "" if all combinations are valid.
# It receives a string containing a combination of options, as passed to the compiler,
# e.g. "-DOPT1 -DOPT2 ...". It must return 0 iff the combination is valid, non-zero if invalid.
build_test_config_combos() {
file=$1
shift
validate_options=$1
shift
options=("$@")
# clear all of the options so that they can be overridden on the clang commandline
for opt in "${options[@]}"; do
./scripts/config.py unset ${opt}
done
# enter the library directory
cd library
# The most common issue is unused variables/functions, so ensure -Wunused is set.
warning_flags="-Werror -Wall -Wextra -Wwrite-strings -Wpointer-arith -Wimplicit-fallthrough -Wshadow -Wvla -Wformat=2 -Wno-format-nonliteral -Wshadow -Wasm-operand-widths -Wunused"
# Extract the command generated by the Makefile to build the target file.
# This ensures that we have any include paths, macro definitions, etc
# that may be applied by make.
# Add -fsyntax-only as we only want a syntax check and don't need to generate a file.
compile_cmd="clang \$(LOCAL_CFLAGS) ${warning_flags} -fsyntax-only -c"
makefile=$(TMPDIR=. mktemp)
deps=""
len=${#options[@]}
source_file=../${file%.o}.c
targets=0
echo 'include Makefile' >${makefile}
for ((i = 0; i < $((2**${len})); i++)); do
# generate each of 2^n combinations of options
# each bit of $i is used to determine if options[i] will be set or not
target="t"
clang_args=""
for ((j = 0; j < ${len}; j++)); do
if (((i >> j) & 1)); then
opt=-D${options[$j]}
clang_args="${clang_args} ${opt}"
target="${target}${opt}"
fi
done
# if combination is not known to be invalid, add it to the makefile
if [[ -z $validate_options ]] || $validate_options "${clang_args}"; then
cmd="${compile_cmd} ${clang_args}"
echo "${target}: ${source_file}; $cmd ${source_file}" >> ${makefile}
deps="${deps} ${target}"
((++targets))
fi
done
echo "build_test_config_combos: ${deps}" >> ${makefile}
# execute all of the commands via Make (probably in parallel)
make -s -f ${makefile} build_test_config_combos
echo "$targets targets checked"
# clean up the temporary makefile
rm ${makefile}
}
validate_aes_config_variations() {
if [[ "$1" == *"MBEDTLS_AES_USE_HARDWARE_ONLY"* ]]; then
if [[ !(("$HOSTTYPE" == "aarch64" && "$1" != *"MBEDTLS_AESCE_C"*) || \
("$HOSTTYPE" == "x86_64" && "$1" != *"MBEDTLS_AESNI_C"*)) ]]; then
return 1
fi
fi
return 0
}
component_build_aes_variations() {
# 18s - around 90ms per clang invocation on M1 Pro
#
# aes.o has many #if defined(...) guards that intersect in complex ways.
# Test that all the combinations build cleanly.
MBEDTLS_ROOT_DIR="$PWD"
msg "build: aes.o for all combinations of relevant config options"
build_test_config_combos ${BUILTIN_SRC_PATH}/aes.o validate_aes_config_variations \
"MBEDTLS_AES_SETKEY_ENC_ALT" "MBEDTLS_AES_DECRYPT_ALT" \
"MBEDTLS_AES_ROM_TABLES" "MBEDTLS_AES_ENCRYPT_ALT" "MBEDTLS_AES_SETKEY_DEC_ALT" \
"MBEDTLS_AES_FEWER_TABLES" "MBEDTLS_AES_USE_HARDWARE_ONLY" \
"MBEDTLS_AESNI_C" "MBEDTLS_AESCE_C" "MBEDTLS_AES_ONLY_128_BIT_KEY_LENGTH"
cd "$MBEDTLS_ROOT_DIR"
msg "build: aes.o for all combinations of relevant config options + BLOCK_CIPHER_NO_DECRYPT"
# MBEDTLS_BLOCK_CIPHER_NO_DECRYPT is incompatible with ECB in PSA, CBC/XTS/NIST_KW/DES,
# manually set or unset those configurations to check
# MBEDTLS_BLOCK_CIPHER_NO_DECRYPT with various combinations in aes.o.
scripts/config.py set MBEDTLS_BLOCK_CIPHER_NO_DECRYPT
scripts/config.py unset MBEDTLS_CIPHER_MODE_CBC
scripts/config.py unset MBEDTLS_CIPHER_MODE_XTS
scripts/config.py unset MBEDTLS_DES_C
scripts/config.py unset MBEDTLS_NIST_KW_C
build_test_config_combos ${BUILTIN_SRC_PATH}/aes.o validate_aes_config_variations \
"MBEDTLS_AES_SETKEY_ENC_ALT" "MBEDTLS_AES_DECRYPT_ALT" \
"MBEDTLS_AES_ROM_TABLES" "MBEDTLS_AES_ENCRYPT_ALT" "MBEDTLS_AES_SETKEY_DEC_ALT" \
"MBEDTLS_AES_FEWER_TABLES" "MBEDTLS_AES_USE_HARDWARE_ONLY" \
"MBEDTLS_AESNI_C" "MBEDTLS_AESCE_C" "MBEDTLS_AES_ONLY_128_BIT_KEY_LENGTH"
}
component_test_no_platform () {
# Full configuration build, without platform support, file IO and net sockets.
# This should catch missing mbedtls_printf definitions, and by disabling file
# IO, it should catch missing '#include <stdio.h>'
msg "build: full config except platform/fsio/net, make, gcc, C99" # ~ 30s
scripts/config.py full_no_platform
scripts/config.py unset MBEDTLS_PLATFORM_C
scripts/config.py unset MBEDTLS_NET_C
scripts/config.py unset MBEDTLS_FS_IO
scripts/config.py unset MBEDTLS_PSA_CRYPTO_SE_C
scripts/config.py unset MBEDTLS_PSA_CRYPTO_STORAGE_C
scripts/config.py unset MBEDTLS_PSA_ITS_FILE_C
scripts/config.py unset MBEDTLS_ENTROPY_NV_SEED
# Note, _DEFAULT_SOURCE needs to be defined for platforms using glibc version >2.19,
# to re-enable platform integration features otherwise disabled in C99 builds
make CC=gcc CFLAGS='-Werror -Wall -Wextra -std=c99 -pedantic -Os -D_DEFAULT_SOURCE' lib programs
make CC=gcc CFLAGS='-Werror -Wall -Wextra -Os' test
}
component_build_no_std_function () {
# catch compile bugs in _uninit functions
msg "build: full config with NO_STD_FUNCTION, make, gcc" # ~ 30s
scripts/config.py full
scripts/config.py set MBEDTLS_PLATFORM_NO_STD_FUNCTIONS
scripts/config.py unset MBEDTLS_ENTROPY_NV_SEED
scripts/config.py unset MBEDTLS_PLATFORM_NV_SEED_ALT
CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Check .
make
}
component_build_no_ssl_srv () {
msg "build: full config except SSL server, make, gcc" # ~ 30s
scripts/config.py full
scripts/config.py unset MBEDTLS_SSL_SRV_C
make CC=gcc CFLAGS='-Werror -Wall -Wextra -O1'
}
component_build_no_ssl_cli () {
msg "build: full config except SSL client, make, gcc" # ~ 30s
scripts/config.py full
scripts/config.py unset MBEDTLS_SSL_CLI_C
make CC=gcc CFLAGS='-Werror -Wall -Wextra -O1'
}
component_build_no_sockets () {
# Note, C99 compliance can also be tested with the sockets support disabled,
# as that requires a POSIX platform (which isn't the same as C99).
msg "build: full config except net_sockets.c, make, gcc -std=c99 -pedantic" # ~ 30s
scripts/config.py full
scripts/config.py unset MBEDTLS_NET_C # getaddrinfo() undeclared, etc.
scripts/config.py set MBEDTLS_NO_PLATFORM_ENTROPY # uses syscall() on GNU/Linux
make CC=gcc CFLAGS='-Werror -Wall -Wextra -O1 -std=c99 -pedantic' lib
}
component_test_memory_buffer_allocator_backtrace () {
msg "build: default config with memory buffer allocator and backtrace enabled"
scripts/config.py set MBEDTLS_MEMORY_BUFFER_ALLOC_C
scripts/config.py set MBEDTLS_PLATFORM_MEMORY
scripts/config.py set MBEDTLS_MEMORY_BACKTRACE
scripts/config.py set MBEDTLS_MEMORY_DEBUG
cmake -DCMAKE_BUILD_TYPE:String=Release .
make
msg "test: MBEDTLS_MEMORY_BUFFER_ALLOC_C and MBEDTLS_MEMORY_BACKTRACE"
make test
}
component_test_memory_buffer_allocator () {
msg "build: default config with memory buffer allocator"
scripts/config.py set MBEDTLS_MEMORY_BUFFER_ALLOC_C
scripts/config.py set MBEDTLS_PLATFORM_MEMORY
cmake -DCMAKE_BUILD_TYPE:String=Release .
make
msg "test: MBEDTLS_MEMORY_BUFFER_ALLOC_C"
make test
msg "test: ssl-opt.sh, MBEDTLS_MEMORY_BUFFER_ALLOC_C"
# MBEDTLS_MEMORY_BUFFER_ALLOC is slow. Skip tests that tend to time out.
tests/ssl-opt.sh -e '^DTLS proxy'
}
component_test_no_max_fragment_length () {
# Run max fragment length tests with MFL disabled
msg "build: default config except MFL extension (ASan build)" # ~ 30s
scripts/config.py unset MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: ssl-opt.sh, MFL-related tests"
tests/ssl-opt.sh -f "Max fragment length"
}
component_test_asan_remove_peer_certificate () {
msg "build: default config with MBEDTLS_SSL_KEEP_PEER_CERTIFICATE disabled (ASan build)"
scripts/config.py unset MBEDTLS_SSL_KEEP_PEER_CERTIFICATE
scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: !MBEDTLS_SSL_KEEP_PEER_CERTIFICATE"
make test
msg "test: ssl-opt.sh, !MBEDTLS_SSL_KEEP_PEER_CERTIFICATE"
tests/ssl-opt.sh
msg "test: compat.sh, !MBEDTLS_SSL_KEEP_PEER_CERTIFICATE"
tests/compat.sh
msg "test: context-info.sh, !MBEDTLS_SSL_KEEP_PEER_CERTIFICATE"
tests/context-info.sh
}
component_test_no_max_fragment_length_small_ssl_out_content_len () {
msg "build: no MFL extension, small SSL_OUT_CONTENT_LEN (ASan build)"
scripts/config.py unset MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
scripts/config.py set MBEDTLS_SSL_IN_CONTENT_LEN 16384
scripts/config.py set MBEDTLS_SSL_OUT_CONTENT_LEN 4096
CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: MFL tests (disabled MFL extension case) & large packet tests"
tests/ssl-opt.sh -f "Max fragment length\|Large buffer"
msg "test: context-info.sh (disabled MFL extension case)"
tests/context-info.sh
}
component_test_variable_ssl_in_out_buffer_len () {
msg "build: MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH enabled (ASan build)"
scripts/config.py set MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH
CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH enabled"
make test
msg "test: ssl-opt.sh, MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH enabled"
tests/ssl-opt.sh
msg "test: compat.sh, MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH enabled"
tests/compat.sh
}
component_test_dtls_cid_legacy () {
msg "build: MBEDTLS_SSL_DTLS_CONNECTION_ID (legacy) enabled (ASan build)"
scripts/config.py set MBEDTLS_SSL_DTLS_CONNECTION_ID_COMPAT 1
CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: MBEDTLS_SSL_DTLS_CONNECTION_ID (legacy)"
make test
msg "test: ssl-opt.sh, MBEDTLS_SSL_DTLS_CONNECTION_ID (legacy) enabled"
tests/ssl-opt.sh
msg "test: compat.sh, MBEDTLS_SSL_DTLS_CONNECTION_ID (legacy) enabled"
tests/compat.sh
}
component_test_ssl_alloc_buffer_and_mfl () {
msg "build: default config with memory buffer allocator and MFL extension"
scripts/config.py set MBEDTLS_MEMORY_BUFFER_ALLOC_C
scripts/config.py set MBEDTLS_PLATFORM_MEMORY
scripts/config.py set MBEDTLS_MEMORY_DEBUG
scripts/config.py set MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
scripts/config.py set MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH
cmake -DCMAKE_BUILD_TYPE:String=Release .
make
msg "test: MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH, MBEDTLS_MEMORY_BUFFER_ALLOC_C, MBEDTLS_MEMORY_DEBUG and MBEDTLS_SSL_MAX_FRAGMENT_LENGTH"
make test
msg "test: MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH, MBEDTLS_MEMORY_BUFFER_ALLOC_C, MBEDTLS_MEMORY_DEBUG and MBEDTLS_SSL_MAX_FRAGMENT_LENGTH"
tests/ssl-opt.sh -f "Handshake memory usage"
}
component_test_when_no_ciphersuites_have_mac () {
msg "build: when no ciphersuites have MAC"
scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CBC_NO_PADDING
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CBC_PKCS7
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CMAC
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_PBKDF2_AES_CMAC_PRF_128
scripts/config.py unset MBEDTLS_CIPHER_NULL_CIPHER
scripts/config.py unset MBEDTLS_CIPHER_MODE_CBC
scripts/config.py unset MBEDTLS_CMAC_C
make
msg "test: !MBEDTLS_SSL_SOME_SUITES_USE_MAC"
make test
msg "test ssl-opt.sh: !MBEDTLS_SSL_SOME_SUITES_USE_MAC"
tests/ssl-opt.sh -f 'Default\|EtM' -e 'without EtM'
}
component_test_no_date_time () {
msg "build: default config without MBEDTLS_HAVE_TIME_DATE"
scripts/config.py unset MBEDTLS_HAVE_TIME_DATE
cmake -D CMAKE_BUILD_TYPE:String=Check .
make
msg "test: !MBEDTLS_HAVE_TIME_DATE - main suites"
make test
}
component_test_platform_calloc_macro () {
msg "build: MBEDTLS_PLATFORM_{CALLOC/FREE}_MACRO enabled (ASan build)"
scripts/config.py set MBEDTLS_PLATFORM_MEMORY
scripts/config.py set MBEDTLS_PLATFORM_CALLOC_MACRO calloc
scripts/config.py set MBEDTLS_PLATFORM_FREE_MACRO free
CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: MBEDTLS_PLATFORM_{CALLOC/FREE}_MACRO enabled (ASan build)"
make test
}
component_test_malloc_0_null () {
msg "build: malloc(0) returns NULL (ASan+UBSan build)"
scripts/config.py full
make CC=$ASAN_CC CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"$PWD/tests/configs/user-config-malloc-0-null.h\"' $ASAN_CFLAGS" LDFLAGS="$ASAN_CFLAGS"
msg "test: malloc(0) returns NULL (ASan+UBSan build)"
make test
msg "selftest: malloc(0) returns NULL (ASan+UBSan build)"
# Just the calloc selftest. "make test" ran the others as part of the
# test suites.
programs/test/selftest calloc
msg "test ssl-opt.sh: malloc(0) returns NULL (ASan+UBSan build)"
# Run a subset of the tests. The choice is a balance between coverage
# and time (including time indirectly wasted due to flaky tests).
# The current choice is to skip tests whose description includes
# "proxy", which is an approximation of skipping tests that use the
# UDP proxy, which tend to be slower and flakier.
tests/ssl-opt.sh -e 'proxy'
}
support_test_aesni() {
# Check that gcc targets x86_64 (we can build AESNI), and check for
# AESNI support on the host (we can run AESNI).
#
# The name of this function is possibly slightly misleading, but needs to align
# with the name of the corresponding test, component_test_aesni.
#
# In principle 32-bit x86 can support AESNI, but our implementation does not
# support 32-bit x86, so we check for x86-64.
# We can only grep /proc/cpuinfo on Linux, so this also checks for Linux
(gcc -v 2>&1 | grep Target | grep -q x86_64) &&
[[ "$HOSTTYPE" == "x86_64" && "$OSTYPE" == "linux-gnu" ]] &&
(lscpu | grep -qw aes)
}
component_test_aesni () { # ~ 60s
# This tests the two AESNI implementations (intrinsics and assembly), and also the plain C
# fallback. It also tests the logic that is used to select which implementation(s) to build.
#
# This test does not require the host to have support for AESNI (if it doesn't, the run-time
# AESNI detection will fallback to the plain C implementation, so the tests will instead
# exercise the plain C impl).
msg "build: default config with different AES implementations"
scripts/config.py set MBEDTLS_AESNI_C
scripts/config.py unset MBEDTLS_AES_USE_HARDWARE_ONLY
scripts/config.py set MBEDTLS_HAVE_ASM
# test the intrinsics implementation
msg "AES tests, test intrinsics"
make clean
make CC=gcc CFLAGS='-Werror -Wall -Wextra -mpclmul -msse2 -maes'
# check that we built intrinsics - this should be used by default when supported by the compiler
./programs/test/selftest aes | grep "AESNI code" | grep -q "intrinsics"
# test the asm implementation
msg "AES tests, test assembly"
make clean
make CC=gcc CFLAGS='-Werror -Wall -Wextra -mno-pclmul -mno-sse2 -mno-aes'
# check that we built assembly - this should be built if the compiler does not support intrinsics
./programs/test/selftest aes | grep "AESNI code" | grep -q "assembly"
# test the plain C implementation
scripts/config.py unset MBEDTLS_AESNI_C
scripts/config.py unset MBEDTLS_AES_USE_HARDWARE_ONLY
msg "AES tests, plain C"
make clean
make CC=gcc CFLAGS='-O2 -Werror'
# check that there is no AESNI code present
./programs/test/selftest aes | not grep -q "AESNI code"
not grep -q "AES note: using AESNI" ./programs/test/selftest
grep -q "AES note: built-in implementation." ./programs/test/selftest
# test the intrinsics implementation
scripts/config.py set MBEDTLS_AESNI_C
scripts/config.py set MBEDTLS_AES_USE_HARDWARE_ONLY
msg "AES tests, test AESNI only"
make clean
make CC=gcc CFLAGS='-Werror -Wall -Wextra -mpclmul -msse2 -maes'
./programs/test/selftest aes | grep -q "AES note: using AESNI"
./programs/test/selftest aes | not grep -q "AES note: built-in implementation."
grep -q "AES note: using AESNI" ./programs/test/selftest
not grep -q "AES note: built-in implementation." ./programs/test/selftest
}
component_test_sha3_variations() {
msg "sha3 loop unroll variations"
# define minimal config sufficient to test SHA3
cat > include/mbedtls/mbedtls_config.h << END
#define MBEDTLS_SELF_TEST
#define MBEDTLS_SHA3_C
END
msg "all loops unrolled"
make clean
make -C tests ../tf-psa-crypto/tests/test_suite_shax CFLAGS="-DMBEDTLS_SHA3_THETA_UNROLL=1 -DMBEDTLS_SHA3_PI_UNROLL=1 -DMBEDTLS_SHA3_CHI_UNROLL=1 -DMBEDTLS_SHA3_RHO_UNROLL=1"
./tf-psa-crypto/tests/test_suite_shax
msg "all loops rolled up"
make clean
make -C tests ../tf-psa-crypto/tests/test_suite_shax CFLAGS="-DMBEDTLS_SHA3_THETA_UNROLL=0 -DMBEDTLS_SHA3_PI_UNROLL=0 -DMBEDTLS_SHA3_CHI_UNROLL=0 -DMBEDTLS_SHA3_RHO_UNROLL=0"
./tf-psa-crypto/tests/test_suite_shax
}
support_test_aesni_m32() {
support_test_m32_no_asm && (lscpu | grep -qw aes)
}
component_test_aesni_m32 () { # ~ 60s
# This tests are duplicated from component_test_aesni for i386 target
#
# AESNI intrinsic code supports i386 and assembly code does not support it.
msg "build: default config with different AES implementations"
scripts/config.py set MBEDTLS_AESNI_C
scripts/config.py unset MBEDTLS_AES_USE_HARDWARE_ONLY
scripts/config.py set MBEDTLS_HAVE_ASM
# test the intrinsics implementation with gcc
msg "AES tests, test intrinsics (gcc)"
make clean
make CC=gcc CFLAGS='-m32 -Werror -Wall -Wextra' LDFLAGS='-m32'
# check that we built intrinsics - this should be used by default when supported by the compiler
./programs/test/selftest aes | grep "AESNI code" | grep -q "intrinsics"
grep -q "AES note: using AESNI" ./programs/test/selftest
grep -q "AES note: built-in implementation." ./programs/test/selftest
grep -q mbedtls_aesni_has_support ./programs/test/selftest
scripts/config.py set MBEDTLS_AESNI_C
scripts/config.py set MBEDTLS_AES_USE_HARDWARE_ONLY
msg "AES tests, test AESNI only"
make clean
make CC=gcc CFLAGS='-m32 -Werror -Wall -Wextra -mpclmul -msse2 -maes' LDFLAGS='-m32'
./programs/test/selftest aes | grep -q "AES note: using AESNI"
./programs/test/selftest aes | not grep -q "AES note: built-in implementation."
grep -q "AES note: using AESNI" ./programs/test/selftest
not grep -q "AES note: built-in implementation." ./programs/test/selftest
not grep -q mbedtls_aesni_has_support ./programs/test/selftest
}
# For timebeing, no aarch64 gcc available in CI and no arm64 CI node.
component_build_aes_aesce_armcc () {
msg "Build: AESCE test on arm64 platform without plain C."
scripts/config.py baremetal
# armc[56] don't support SHA-512 intrinsics
scripts/config.py unset MBEDTLS_SHA512_USE_A64_CRYPTO_IF_PRESENT
# Stop armclang warning about feature detection for A64_CRYPTO.
# With this enabled, the library does build correctly under armclang,
# but in baremetal builds (as tested here), feature detection is
# unavailable, and the user is notified via a #warning. So enabling
# this feature would prevent us from building with -Werror on
# armclang. Tracked in #7198.
scripts/config.py unset MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_IF_PRESENT
scripts/config.py set MBEDTLS_HAVE_ASM
msg "AESCE, build with default configuration."
scripts/config.py set MBEDTLS_AESCE_C
scripts/config.py unset MBEDTLS_AES_USE_HARDWARE_ONLY
armc6_build_test "-O1 --target=aarch64-arm-none-eabi -march=armv8-a+crypto"
msg "AESCE, build AESCE only"
scripts/config.py set MBEDTLS_AESCE_C
scripts/config.py set MBEDTLS_AES_USE_HARDWARE_ONLY
armc6_build_test "-O1 --target=aarch64-arm-none-eabi -march=armv8-a+crypto"
}
support_build_aes_armce() {
# clang >= 11 is required to build with AES extensions
[[ $(clang_version) -ge 11 ]]
}
component_build_aes_armce () {
# Test variations of AES with Armv8 crypto extensions
scripts/config.py set MBEDTLS_AESCE_C
scripts/config.py set MBEDTLS_AES_USE_HARDWARE_ONLY
msg "MBEDTLS_AES_USE_HARDWARE_ONLY, clang, aarch64"
make -B library/../${BUILTIN_SRC_PATH}/aesce.o CC=clang CFLAGS="--target=aarch64-linux-gnu -march=armv8-a+crypto"
msg "MBEDTLS_AES_USE_HARDWARE_ONLY, clang, arm"
make -B library/../${BUILTIN_SRC_PATH}/aesce.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a72+crypto -marm"
msg "MBEDTLS_AES_USE_HARDWARE_ONLY, clang, thumb"
make -B library/../${BUILTIN_SRC_PATH}/aesce.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a32+crypto -mthumb"
scripts/config.py unset MBEDTLS_AES_USE_HARDWARE_ONLY
msg "no MBEDTLS_AES_USE_HARDWARE_ONLY, clang, aarch64"
make -B library/../${BUILTIN_SRC_PATH}/aesce.o CC=clang CFLAGS="--target=aarch64-linux-gnu -march=armv8-a+crypto"
msg "no MBEDTLS_AES_USE_HARDWARE_ONLY, clang, arm"
make -B library/../${BUILTIN_SRC_PATH}/aesce.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a72+crypto -marm"
msg "no MBEDTLS_AES_USE_HARDWARE_ONLY, clang, thumb"
make -B library/../${BUILTIN_SRC_PATH}/aesce.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a32+crypto -mthumb"
# test for presence of AES instructions
scripts/config.py set MBEDTLS_AES_USE_HARDWARE_ONLY
msg "clang, test A32 crypto instructions built"
make -B library/../${BUILTIN_SRC_PATH}/aesce.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a72+crypto -marm -S"
grep -E 'aes[0-9a-z]+.[0-9]\s*[qv]' ${BUILTIN_SRC_PATH}/aesce.o
msg "clang, test T32 crypto instructions built"
make -B library/../${BUILTIN_SRC_PATH}/aesce.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a32+crypto -mthumb -S"
grep -E 'aes[0-9a-z]+.[0-9]\s*[qv]' ${BUILTIN_SRC_PATH}/aesce.o
msg "clang, test aarch64 crypto instructions built"
make -B library/../${BUILTIN_SRC_PATH}/aesce.o CC=clang CFLAGS="--target=aarch64-linux-gnu -march=armv8-a -S"
grep -E 'aes[a-z]+\s*[qv]' ${BUILTIN_SRC_PATH}/aesce.o
# test for absence of AES instructions
scripts/config.py unset MBEDTLS_AES_USE_HARDWARE_ONLY
scripts/config.py unset MBEDTLS_AESCE_C
msg "clang, test A32 crypto instructions not built"
make -B library/../${BUILTIN_SRC_PATH}/aesce.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a72+crypto -marm -S"
not grep -E 'aes[0-9a-z]+.[0-9]\s*[qv]' ${BUILTIN_SRC_PATH}/aesce.o
msg "clang, test T32 crypto instructions not built"
make -B library/../${BUILTIN_SRC_PATH}/aesce.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a32+crypto -mthumb -S"
not grep -E 'aes[0-9a-z]+.[0-9]\s*[qv]' ${BUILTIN_SRC_PATH}/aesce.o
msg "clang, test aarch64 crypto instructions not built"
make -B library/../${BUILTIN_SRC_PATH}/aesce.o CC=clang CFLAGS="--target=aarch64-linux-gnu -march=armv8-a -S"
not grep -E 'aes[a-z]+\s*[qv]' ${BUILTIN_SRC_PATH}/aesce.o
}
support_build_sha_armce() {
# clang >= 4 is required to build with SHA extensions
[[ $(clang_version) -ge 4 ]]
}
component_build_sha_armce () {
scripts/config.py unset MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_IF_PRESENT
# Test variations of SHA256 Armv8 crypto extensions
scripts/config.py set MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_ONLY
msg "MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_ONLY clang, aarch64"
make -B library/../${BUILTIN_SRC_PATH}/sha256.o CC=clang CFLAGS="--target=aarch64-linux-gnu -march=armv8-a"
msg "MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_ONLY clang, arm"
make -B library/../${BUILTIN_SRC_PATH}/sha256.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a72+crypto -marm"
scripts/config.py unset MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_ONLY
# test the deprecated form of the config option
scripts/config.py set MBEDTLS_SHA256_USE_A64_CRYPTO_ONLY
msg "MBEDTLS_SHA256_USE_A64_CRYPTO_ONLY clang, thumb"
make -B library/../${BUILTIN_SRC_PATH}/sha256.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a32+crypto -mthumb"
scripts/config.py unset MBEDTLS_SHA256_USE_A64_CRYPTO_ONLY
scripts/config.py set MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_IF_PRESENT
msg "MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_IF_PRESENT clang, aarch64"
make -B library/../${BUILTIN_SRC_PATH}/sha256.o CC=clang CFLAGS="--target=aarch64-linux-gnu -march=armv8-a"
scripts/config.py unset MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_IF_PRESENT
# test the deprecated form of the config option
scripts/config.py set MBEDTLS_SHA256_USE_A64_CRYPTO_IF_PRESENT
msg "MBEDTLS_SHA256_USE_A64_CRYPTO_IF_PRESENT clang, arm"
make -B library/../${BUILTIN_SRC_PATH}/sha256.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a72+crypto -marm -std=c99"
msg "MBEDTLS_SHA256_USE_A64_CRYPTO_IF_PRESENT clang, thumb"
make -B library/../${BUILTIN_SRC_PATH}/sha256.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a32+crypto -mthumb"
scripts/config.py unset MBEDTLS_SHA256_USE_A64_CRYPTO_IF_PRESENT
# examine the disassembly for presence of SHA instructions
for opt in MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_ONLY MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_IF_PRESENT; do
scripts/config.py set ${opt}
msg "${opt} clang, test A32 crypto instructions built"
make -B library/../${BUILTIN_SRC_PATH}/sha256.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a72+crypto -marm -S"
grep -E 'sha256[a-z0-9]+.32\s+[qv]' ${BUILTIN_SRC_PATH}/sha256.o
msg "${opt} clang, test T32 crypto instructions built"
make -B library/../${BUILTIN_SRC_PATH}/sha256.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a32+crypto -mthumb -S"
grep -E 'sha256[a-z0-9]+.32\s+[qv]' ${BUILTIN_SRC_PATH}/sha256.o
msg "${opt} clang, test aarch64 crypto instructions built"
make -B library/../${BUILTIN_SRC_PATH}/sha256.o CC=clang CFLAGS="--target=aarch64-linux-gnu -march=armv8-a -S"
grep -E 'sha256[a-z0-9]+\s+[qv]' ${BUILTIN_SRC_PATH}/sha256.o
scripts/config.py unset ${opt}
done
# examine the disassembly for absence of SHA instructions
msg "clang, test A32 crypto instructions not built"
make -B library/../${BUILTIN_SRC_PATH}/sha256.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a72+crypto -marm -S"
not grep -E 'sha256[a-z0-9]+.32\s+[qv]' ${BUILTIN_SRC_PATH}/sha256.o
msg "clang, test T32 crypto instructions not built"
make -B library/../${BUILTIN_SRC_PATH}/sha256.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a32+crypto -mthumb -S"
not grep -E 'sha256[a-z0-9]+.32\s+[qv]' ${BUILTIN_SRC_PATH}/sha256.o
msg "clang, test aarch64 crypto instructions not built"
make -B library/../${BUILTIN_SRC_PATH}/sha256.o CC=clang CFLAGS="--target=aarch64-linux-gnu -march=armv8-a -S"
not grep -E 'sha256[a-z0-9]+\s+[qv]' ${BUILTIN_SRC_PATH}/sha256.o
}
component_test_aes_only_128_bit_keys () {
msg "build: default config + AES_ONLY_128_BIT_KEY_LENGTH"
scripts/config.py set MBEDTLS_AES_ONLY_128_BIT_KEY_LENGTH
make CFLAGS='-O2 -Werror -Wall -Wextra'
msg "test: default config + AES_ONLY_128_BIT_KEY_LENGTH"
make test
}
component_test_no_ctr_drbg_aes_only_128_bit_keys () {
msg "build: default config + AES_ONLY_128_BIT_KEY_LENGTH - CTR_DRBG_C"
scripts/config.py set MBEDTLS_AES_ONLY_128_BIT_KEY_LENGTH
scripts/config.py unset MBEDTLS_CTR_DRBG_C
make CC=clang CFLAGS='-Werror -Wall -Wextra'
msg "test: default config + AES_ONLY_128_BIT_KEY_LENGTH - CTR_DRBG_C"
make test
}
component_test_aes_only_128_bit_keys_have_builtins () {
msg "build: default config + AES_ONLY_128_BIT_KEY_LENGTH - AESNI_C - AESCE_C"
scripts/config.py set MBEDTLS_AES_ONLY_128_BIT_KEY_LENGTH
scripts/config.py unset MBEDTLS_AESNI_C
scripts/config.py unset MBEDTLS_AESCE_C
make CFLAGS='-O2 -Werror -Wall -Wextra'
msg "test: default config + AES_ONLY_128_BIT_KEY_LENGTH - AESNI_C - AESCE_C"
make test
msg "selftest: default config + AES_ONLY_128_BIT_KEY_LENGTH - AESNI_C - AESCE_C"
programs/test/selftest
}
component_test_gcm_largetable () {
msg "build: default config + GCM_LARGE_TABLE - AESNI_C - AESCE_C"
scripts/config.py set MBEDTLS_GCM_LARGE_TABLE
scripts/config.py unset MBEDTLS_AESNI_C
scripts/config.py unset MBEDTLS_AESCE_C
make CFLAGS='-O2 -Werror -Wall -Wextra'
msg "test: default config - GCM_LARGE_TABLE - AESNI_C - AESCE_C"
make test
}
component_test_aes_fewer_tables () {
msg "build: default config with AES_FEWER_TABLES enabled"
scripts/config.py set MBEDTLS_AES_FEWER_TABLES
make CFLAGS='-O2 -Werror -Wall -Wextra'
msg "test: AES_FEWER_TABLES"
make test
}
component_test_aes_rom_tables () {
msg "build: default config with AES_ROM_TABLES enabled"
scripts/config.py set MBEDTLS_AES_ROM_TABLES
make CFLAGS='-O2 -Werror -Wall -Wextra'
msg "test: AES_ROM_TABLES"
make test
}
component_test_aes_fewer_tables_and_rom_tables () {
msg "build: default config with AES_ROM_TABLES and AES_FEWER_TABLES enabled"
scripts/config.py set MBEDTLS_AES_FEWER_TABLES
scripts/config.py set MBEDTLS_AES_ROM_TABLES
make CFLAGS='-O2 -Werror -Wall -Wextra'
msg "test: AES_FEWER_TABLES + AES_ROM_TABLES"
make test
}
# helper for common_block_cipher_no_decrypt() which:
# - enable/disable the list of config options passed from -s/-u respectively.
# - build
# - test for tests_suite_xxx
# - selftest
#
# Usage: helper_block_cipher_no_decrypt_build_test
# [-s set_opts] [-u unset_opts] [-c cflags] [-l ldflags] [option [...]]
# Options: -s set_opts the list of config options to enable
# -u unset_opts the list of config options to disable
# -c cflags the list of options passed to CFLAGS
# -l ldflags the list of options passed to LDFLAGS
helper_block_cipher_no_decrypt_build_test () {
while [ $# -gt 0 ]; do
case "$1" in
-s)
shift; local set_opts="$1";;
-u)
shift; local unset_opts="$1";;
-c)
shift; local cflags="-Werror -Wall -Wextra $1";;
-l)
shift; local ldflags="$1";;
esac
shift
done
set_opts="${set_opts:-}"
unset_opts="${unset_opts:-}"
cflags="${cflags:-}"
ldflags="${ldflags:-}"
[ -n "$set_opts" ] && echo "Enabling: $set_opts" && scripts/config.py set-all $set_opts
[ -n "$unset_opts" ] && echo "Disabling: $unset_opts" && scripts/config.py unset-all $unset_opts
msg "build: default config + BLOCK_CIPHER_NO_DECRYPT${set_opts:+ + $set_opts}${unset_opts:+ - $unset_opts} with $cflags${ldflags:+, $ldflags}"
make clean
make CFLAGS="-O2 $cflags" LDFLAGS="$ldflags"
# Make sure we don't have mbedtls_xxx_setkey_dec in AES/ARIA/CAMELLIA
not grep mbedtls_aes_setkey_dec ${BUILTIN_SRC_PATH}/aes.o
not grep mbedtls_aria_setkey_dec ${BUILTIN_SRC_PATH}/aria.o
not grep mbedtls_camellia_setkey_dec ${BUILTIN_SRC_PATH}/camellia.o
# Make sure we don't have mbedtls_internal_aes_decrypt in AES
not grep mbedtls_internal_aes_decrypt ${BUILTIN_SRC_PATH}/aes.o
# Make sure we don't have mbedtls_aesni_inverse_key in AESNI
not grep mbedtls_aesni_inverse_key ${BUILTIN_SRC_PATH}/aesni.o
msg "test: default config + BLOCK_CIPHER_NO_DECRYPT${set_opts:+ + $set_opts}${unset_opts:+ - $unset_opts} with $cflags${ldflags:+, $ldflags}"
make test
msg "selftest: default config + BLOCK_CIPHER_NO_DECRYPT${set_opts:+ + $set_opts}${unset_opts:+ - $unset_opts} with $cflags${ldflags:+, $ldflags}"
programs/test/selftest
}
# This is a common configuration function used in:
# - component_test_block_cipher_no_decrypt_aesni_legacy()
# - component_test_block_cipher_no_decrypt_aesni_use_psa()
# in order to test BLOCK_CIPHER_NO_DECRYPT with AESNI intrinsics,
# AESNI assembly and AES C implementation on x86_64 and with AESNI intrinsics
# on x86.
common_block_cipher_no_decrypt () {
# test AESNI intrinsics
helper_block_cipher_no_decrypt_build_test \
-s "MBEDTLS_AESNI_C" \
-c "-mpclmul -msse2 -maes"
# test AESNI assembly
helper_block_cipher_no_decrypt_build_test \
-s "MBEDTLS_AESNI_C" \
-c "-mno-pclmul -mno-sse2 -mno-aes"
# test AES C implementation
helper_block_cipher_no_decrypt_build_test \
-u "MBEDTLS_AESNI_C"
# test AESNI intrinsics for i386 target
helper_block_cipher_no_decrypt_build_test \
-s "MBEDTLS_AESNI_C" \
-c "-m32 -mpclmul -msse2 -maes" \
-l "-m32"
}
# This is a configuration function used in component_test_block_cipher_no_decrypt_xxx:
# usage: 0: no PSA crypto configuration
# 1: use PSA crypto configuration
config_block_cipher_no_decrypt () {
use_psa=$1
scripts/config.py set MBEDTLS_BLOCK_CIPHER_NO_DECRYPT
scripts/config.py unset MBEDTLS_CIPHER_MODE_CBC
scripts/config.py unset MBEDTLS_CIPHER_MODE_XTS
scripts/config.py unset MBEDTLS_DES_C
scripts/config.py unset MBEDTLS_NIST_KW_C
if [ "$use_psa" -eq 1 ]; then
# Enable support for cryptographic mechanisms through the PSA API.
# Note: XTS, KW are not yet supported via the PSA API in Mbed TLS.
scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CBC_NO_PADDING
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CBC_PKCS7
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_ECB_NO_PADDING
scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_KEY_TYPE_DES
fi
}
component_test_block_cipher_no_decrypt_aesni () {
# This consistently causes an llvm crash on clang 3.8, so use gcc
export CC=gcc
config_block_cipher_no_decrypt 0
common_block_cipher_no_decrypt
}
component_test_block_cipher_no_decrypt_aesni_use_psa () {
# This consistently causes an llvm crash on clang 3.8, so use gcc
export CC=gcc
config_block_cipher_no_decrypt 1
common_block_cipher_no_decrypt
}
component_test_block_cipher_no_decrypt_aesce_armcc () {
scripts/config.py baremetal
# armc[56] don't support SHA-512 intrinsics
scripts/config.py unset MBEDTLS_SHA512_USE_A64_CRYPTO_IF_PRESENT
# Stop armclang warning about feature detection for A64_CRYPTO.
# With this enabled, the library does build correctly under armclang,
# but in baremetal builds (as tested here), feature detection is
# unavailable, and the user is notified via a #warning. So enabling
# this feature would prevent us from building with -Werror on
# armclang. Tracked in #7198.
scripts/config.py unset MBEDTLS_SHA256_USE_A64_CRYPTO_IF_PRESENT
scripts/config.py set MBEDTLS_HAVE_ASM
config_block_cipher_no_decrypt 1
# test AESCE baremetal build
scripts/config.py set MBEDTLS_AESCE_C
msg "build: default config + BLOCK_CIPHER_NO_DECRYPT with AESCE"
armc6_build_test "-O1 --target=aarch64-arm-none-eabi -march=armv8-a+crypto -Werror -Wall -Wextra"
# Make sure we don't have mbedtls_xxx_setkey_dec in AES/ARIA/CAMELLIA
not grep mbedtls_aes_setkey_dec ${BUILTIN_SRC_PATH}/aes.o
not grep mbedtls_aria_setkey_dec ${BUILTIN_SRC_PATH}/aria.o
not grep mbedtls_camellia_setkey_dec ${BUILTIN_SRC_PATH}/camellia.o
# Make sure we don't have mbedtls_internal_aes_decrypt in AES
not grep mbedtls_internal_aes_decrypt ${BUILTIN_SRC_PATH}/aes.o
# Make sure we don't have mbedtls_aesce_inverse_key and aesce_decrypt_block in AESCE
not grep mbedtls_aesce_inverse_key ${BUILTIN_SRC_PATH}/aesce.o
not grep aesce_decrypt_block ${BUILTIN_SRC_PATH}/aesce.o
}
component_test_ctr_drbg_aes_256_sha_256 () {
msg "build: full + MBEDTLS_ENTROPY_FORCE_SHA256 (ASan build)"
scripts/config.py full
scripts/config.py unset MBEDTLS_MEMORY_BUFFER_ALLOC_C
scripts/config.py set MBEDTLS_ENTROPY_FORCE_SHA256
CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: full + MBEDTLS_ENTROPY_FORCE_SHA256 (ASan build)"
make test
}
component_test_ctr_drbg_aes_128_sha_512 () {
msg "build: full + MBEDTLS_CTR_DRBG_USE_128_BIT_KEY (ASan build)"
scripts/config.py full
scripts/config.py unset MBEDTLS_MEMORY_BUFFER_ALLOC_C
scripts/config.py set MBEDTLS_CTR_DRBG_USE_128_BIT_KEY
CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: full + MBEDTLS_CTR_DRBG_USE_128_BIT_KEY (ASan build)"
make test
}
component_test_ctr_drbg_aes_128_sha_256 () {
msg "build: full + MBEDTLS_CTR_DRBG_USE_128_BIT_KEY + MBEDTLS_ENTROPY_FORCE_SHA256 (ASan build)"
scripts/config.py full
scripts/config.py unset MBEDTLS_MEMORY_BUFFER_ALLOC_C
scripts/config.py set MBEDTLS_CTR_DRBG_USE_128_BIT_KEY
scripts/config.py set MBEDTLS_ENTROPY_FORCE_SHA256
CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: full + MBEDTLS_CTR_DRBG_USE_128_BIT_KEY + MBEDTLS_ENTROPY_FORCE_SHA256 (ASan build)"
make test
}
component_test_se_default () {
msg "build: default config + MBEDTLS_PSA_CRYPTO_SE_C"
scripts/config.py set MBEDTLS_PSA_CRYPTO_SE_C
make CC=clang CFLAGS="$ASAN_CFLAGS -Os" LDFLAGS="$ASAN_CFLAGS"
msg "test: default config + MBEDTLS_PSA_CRYPTO_SE_C"
make test
}
component_test_psa_crypto_drivers () {
msg "build: full + test drivers dispatching to builtins"
scripts/config.py full
scripts/config.py unset MBEDTLS_PSA_CRYPTO_CONFIG
loc_cflags="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST_ALL"
loc_cflags="${loc_cflags} '-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/user-config-for-test.h\"'"
loc_cflags="${loc_cflags} -I../tests/include -O2"
make CC=$ASAN_CC CFLAGS="${loc_cflags}" LDFLAGS="$ASAN_CFLAGS"
msg "test: full + test drivers dispatching to builtins"
make test
}
component_build_mbedtls_config_file () {
msg "build: make with MBEDTLS_CONFIG_FILE" # ~40s
scripts/config.py -w full_config.h full
echo '#error "MBEDTLS_CONFIG_FILE is not working"' >"$CONFIG_H"
make CFLAGS="-I '$PWD' -DMBEDTLS_CONFIG_FILE='\"full_config.h\"'"
# Make sure this feature is enabled. We'll disable it in the next phase.
programs/test/query_compile_time_config MBEDTLS_NIST_KW_C
make clean
msg "build: make with MBEDTLS_CONFIG_FILE + MBEDTLS_USER_CONFIG_FILE"
# In the user config, disable one feature (for simplicity, pick a feature
# that nothing else depends on).
echo '#undef MBEDTLS_NIST_KW_C' >user_config.h
make CFLAGS="-I '$PWD' -DMBEDTLS_CONFIG_FILE='\"full_config.h\"' -DMBEDTLS_USER_CONFIG_FILE='\"user_config.h\"'"
not programs/test/query_compile_time_config MBEDTLS_NIST_KW_C
rm -f user_config.h full_config.h
}
component_build_psa_config_file () {
msg "build: make with MBEDTLS_PSA_CRYPTO_CONFIG_FILE" # ~40s
scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG
cp "$CRYPTO_CONFIG_H" psa_test_config.h
echo '#error "MBEDTLS_PSA_CRYPTO_CONFIG_FILE is not working"' >"$CRYPTO_CONFIG_H"
make CFLAGS="-I '$PWD' -DMBEDTLS_PSA_CRYPTO_CONFIG_FILE='\"psa_test_config.h\"'"
# Make sure this feature is enabled. We'll disable it in the next phase.
programs/test/query_compile_time_config MBEDTLS_CMAC_C
make clean
msg "build: make with MBEDTLS_PSA_CRYPTO_CONFIG_FILE + MBEDTLS_PSA_CRYPTO_USER_CONFIG_FILE" # ~40s
# In the user config, disable one feature and its dependencies, which will
# reflect on the mbedtls configuration so we can query it with
# query_compile_time_config.
echo '#undef PSA_WANT_ALG_CMAC' >psa_user_config.h
echo '#undef PSA_WANT_ALG_PBKDF2_AES_CMAC_PRF_128' >> psa_user_config.h
scripts/config.py unset MBEDTLS_CMAC_C
make CFLAGS="-I '$PWD' -DMBEDTLS_PSA_CRYPTO_CONFIG_FILE='\"psa_test_config.h\"' -DMBEDTLS_PSA_CRYPTO_USER_CONFIG_FILE='\"psa_user_config.h\"'"
not programs/test/query_compile_time_config MBEDTLS_CMAC_C
rm -f psa_test_config.h psa_user_config.h
}
component_build_psa_alt_headers () {
msg "build: make with PSA alt headers" # ~20s
# Generate alternative versions of the substitutable headers with the
# same content except different include guards.
make -C tests include/alt-extra/psa/crypto_platform_alt.h include/alt-extra/psa/crypto_struct_alt.h
# Build the library and some programs.
# Don't build the fuzzers to avoid having to go through hoops to set
# a correct include path for programs/fuzz/Makefile.
make CFLAGS="-I ../tests/include/alt-extra -DMBEDTLS_PSA_CRYPTO_PLATFORM_FILE='\"psa/crypto_platform_alt.h\"' -DMBEDTLS_PSA_CRYPTO_STRUCT_FILE='\"psa/crypto_struct_alt.h\"'" lib
make -C programs -o fuzz CFLAGS="-I ../tests/include/alt-extra -DMBEDTLS_PSA_CRYPTO_PLATFORM_FILE='\"psa/crypto_platform_alt.h\"' -DMBEDTLS_PSA_CRYPTO_STRUCT_FILE='\"psa/crypto_struct_alt.h\"'"
# Check that we're getting the alternative include guards and not the
# original include guards.
programs/test/query_included_headers | grep -x PSA_CRYPTO_PLATFORM_ALT_H
programs/test/query_included_headers | grep -x PSA_CRYPTO_STRUCT_ALT_H
programs/test/query_included_headers | not grep -x PSA_CRYPTO_PLATFORM_H
programs/test/query_included_headers | not grep -x PSA_CRYPTO_STRUCT_H
}
component_test_m32_no_asm () {
# Build without assembly, so as to use portable C code (in a 32-bit
# build) and not the i386-specific inline assembly.
#
# Note that we require gcc, because clang Asan builds fail to link for
# this target (cannot find libclang_rt.lsan-i386.a - this is a known clang issue).
msg "build: i386, make, gcc, no asm (ASan build)" # ~ 30s
scripts/config.py full
scripts/config.py unset MBEDTLS_HAVE_ASM
scripts/config.py unset MBEDTLS_AESNI_C # AESNI for 32-bit is tested in test_aesni_m32
make CC=gcc CFLAGS="$ASAN_CFLAGS -m32" LDFLAGS="-m32 $ASAN_CFLAGS"
msg "test: i386, make, gcc, no asm (ASan build)"
make test
}
support_test_m32_no_asm () {
case $(uname -m) in
amd64|x86_64) true;;
*) false;;
esac
}
component_test_m32_o2 () {
# Build with optimization, to use the i386 specific inline assembly
# and go faster for tests.
msg "build: i386, make, gcc -O2 (ASan build)" # ~ 30s
scripts/config.py full
scripts/config.py unset MBEDTLS_AESNI_C # AESNI for 32-bit is tested in test_aesni_m32
make CC=gcc CFLAGS="$ASAN_CFLAGS -m32" LDFLAGS="-m32 $ASAN_CFLAGS"
msg "test: i386, make, gcc -O2 (ASan build)"
make test
msg "test ssl-opt.sh, i386, make, gcc-O2"
tests/ssl-opt.sh
}
support_test_m32_o2 () {
support_test_m32_no_asm "$@"
}
component_test_m32_everest () {
msg "build: i386, Everest ECDH context (ASan build)" # ~ 6 min
scripts/config.py set MBEDTLS_ECDH_VARIANT_EVEREST_ENABLED
scripts/config.py unset MBEDTLS_AESNI_C # AESNI for 32-bit is tested in test_aesni_m32
make CC=gcc CFLAGS="$ASAN_CFLAGS -m32" LDFLAGS="-m32 $ASAN_CFLAGS"
msg "test: i386, Everest ECDH context - main suites (inc. selftests) (ASan build)" # ~ 50s
make test
msg "test: i386, Everest ECDH context - ECDH-related part of ssl-opt.sh (ASan build)" # ~ 5s
tests/ssl-opt.sh -f ECDH
msg "test: i386, Everest ECDH context - compat.sh with some ECDH ciphersuites (ASan build)" # ~ 3 min
# Exclude some symmetric ciphers that are redundant here to gain time.
tests/compat.sh -f ECDH -V NO -e 'ARIA\|CAMELLIA\|CHACHA'
}
support_test_m32_everest () {
support_test_m32_no_asm "$@"
}
component_test_mx32 () {
msg "build: 64-bit ILP32, make, gcc" # ~ 30s
scripts/config.py full
make CC=gcc CFLAGS='-O2 -Werror -Wall -Wextra -mx32' LDFLAGS='-mx32'
msg "test: 64-bit ILP32, make, gcc"
make test
}
support_test_mx32 () {
case $(uname -m) in
amd64|x86_64) true;;
*) false;;
esac
}
component_test_min_mpi_window_size () {
msg "build: Default + MBEDTLS_MPI_WINDOW_SIZE=1 (ASan build)" # ~ 10s
scripts/config.py set MBEDTLS_MPI_WINDOW_SIZE 1
CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: MBEDTLS_MPI_WINDOW_SIZE=1 - main suites (inc. selftests) (ASan build)" # ~ 10s
make test
}
component_test_have_int32 () {
msg "build: gcc, force 32-bit bignum limbs"
scripts/config.py unset MBEDTLS_HAVE_ASM
scripts/config.py unset MBEDTLS_AESNI_C
scripts/config.py unset MBEDTLS_AESCE_C
make CC=gcc CFLAGS='-O2 -Werror -Wall -Wextra -DMBEDTLS_HAVE_INT32'
msg "test: gcc, force 32-bit bignum limbs"
make test
}
component_test_have_int64 () {
msg "build: gcc, force 64-bit bignum limbs"
scripts/config.py unset MBEDTLS_HAVE_ASM
scripts/config.py unset MBEDTLS_AESNI_C
scripts/config.py unset MBEDTLS_AESCE_C
make CC=gcc CFLAGS='-O2 -Werror -Wall -Wextra -DMBEDTLS_HAVE_INT64'
msg "test: gcc, force 64-bit bignum limbs"
make test
}
component_test_have_int32_cmake_new_bignum () {
msg "build: gcc, force 32-bit bignum limbs, new bignum interface, test hooks (ASan build)"
scripts/config.py unset MBEDTLS_HAVE_ASM
scripts/config.py unset MBEDTLS_AESNI_C
scripts/config.py unset MBEDTLS_AESCE_C
scripts/config.py set MBEDTLS_TEST_HOOKS
scripts/config.py set MBEDTLS_ECP_WITH_MPI_UINT
make CC=gcc CFLAGS="$ASAN_CFLAGS -Werror -Wall -Wextra -DMBEDTLS_HAVE_INT32" LDFLAGS="$ASAN_CFLAGS"
msg "test: gcc, force 32-bit bignum limbs, new bignum interface, test hooks (ASan build)"
make test
}
component_test_no_udbl_division () {
msg "build: MBEDTLS_NO_UDBL_DIVISION native" # ~ 10s
scripts/config.py full
scripts/config.py set MBEDTLS_NO_UDBL_DIVISION
make CFLAGS='-Werror -O1'
msg "test: MBEDTLS_NO_UDBL_DIVISION native" # ~ 10s
make test
}
component_test_no_64bit_multiplication () {
msg "build: MBEDTLS_NO_64BIT_MULTIPLICATION native" # ~ 10s
scripts/config.py full
scripts/config.py set MBEDTLS_NO_64BIT_MULTIPLICATION
make CFLAGS='-Werror -O1'
msg "test: MBEDTLS_NO_64BIT_MULTIPLICATION native" # ~ 10s
make test
}
component_test_no_strings () {
msg "build: no strings" # ~10s
scripts/config.py full
# Disable options that activate a large amount of string constants.
scripts/config.py unset MBEDTLS_DEBUG_C
scripts/config.py unset MBEDTLS_ERROR_C
scripts/config.py set MBEDTLS_ERROR_STRERROR_DUMMY
scripts/config.py unset MBEDTLS_VERSION_FEATURES
make CFLAGS='-Werror -Os'
msg "test: no strings" # ~ 10s
make test
}
component_test_no_x509_info () {
msg "build: full + MBEDTLS_X509_REMOVE_INFO" # ~ 10s
scripts/config.pl full
scripts/config.pl unset MBEDTLS_MEMORY_BACKTRACE # too slow for tests
scripts/config.pl set MBEDTLS_X509_REMOVE_INFO
make CFLAGS='-Werror -O2'
msg "test: full + MBEDTLS_X509_REMOVE_INFO" # ~ 10s
make test
msg "test: ssl-opt.sh, full + MBEDTLS_X509_REMOVE_INFO" # ~ 1 min
tests/ssl-opt.sh
}
component_test_tls12_only () {
msg "build: default config without MBEDTLS_SSL_PROTO_TLS1_3, cmake, gcc, ASan"
scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: main suites (inc. selftests) (ASan build)"
make test
msg "test: ssl-opt.sh (ASan build)"
tests/ssl-opt.sh
msg "test: compat.sh (ASan build)"
tests/compat.sh
}
component_test_tls13_only () {
msg "build: default config without MBEDTLS_SSL_PROTO_TLS1_2"
scripts/config.py set MBEDTLS_SSL_EARLY_DATA
scripts/config.py set MBEDTLS_SSL_RECORD_SIZE_LIMIT
make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'"
msg "test: TLS 1.3 only, all key exchange modes enabled"
make test
msg "ssl-opt.sh: TLS 1.3 only, all key exchange modes enabled"
tests/ssl-opt.sh
}
component_test_tls13_only_psk () {
msg "build: TLS 1.3 only from default, only PSK key exchange mode"
scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_EPHEMERAL_ENABLED
scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_EPHEMERAL_ENABLED
scripts/config.py unset MBEDTLS_ECDH_C
scripts/config.py unset MBEDTLS_DHM_C
scripts/config.py unset MBEDTLS_X509_CRT_PARSE_C
scripts/config.py unset MBEDTLS_X509_RSASSA_PSS_SUPPORT
scripts/config.py unset MBEDTLS_SSL_SERVER_NAME_INDICATION
scripts/config.py unset MBEDTLS_ECDSA_C
scripts/config.py unset MBEDTLS_PKCS1_V21
scripts/config.py unset MBEDTLS_PKCS7_C
scripts/config.py set MBEDTLS_SSL_EARLY_DATA
make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'"
msg "test_suite_ssl: TLS 1.3 only, only PSK key exchange mode enabled"
cd tests; ./test_suite_ssl; cd ..
msg "ssl-opt.sh: TLS 1.3 only, only PSK key exchange mode enabled"
tests/ssl-opt.sh
}
component_test_tls13_only_ephemeral () {
msg "build: TLS 1.3 only from default, only ephemeral key exchange mode"
scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_ENABLED
scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_EPHEMERAL_ENABLED
scripts/config.py unset MBEDTLS_SSL_EARLY_DATA
make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'"
msg "test_suite_ssl: TLS 1.3 only, only ephemeral key exchange mode"
cd tests; ./test_suite_ssl; cd ..
msg "ssl-opt.sh: TLS 1.3 only, only ephemeral key exchange mode"
tests/ssl-opt.sh
}
component_test_tls13_only_ephemeral_ffdh () {
msg "build: TLS 1.3 only from default, only ephemeral ffdh key exchange mode"
scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_ENABLED
scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_EPHEMERAL_ENABLED
scripts/config.py unset MBEDTLS_SSL_EARLY_DATA
scripts/config.py unset MBEDTLS_ECDH_C
make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'"
msg "test_suite_ssl: TLS 1.3 only, only ephemeral ffdh key exchange mode"
cd tests; ./test_suite_ssl; cd ..
msg "ssl-opt.sh: TLS 1.3 only, only ephemeral ffdh key exchange mode"
tests/ssl-opt.sh
}
component_test_tls13_only_psk_ephemeral () {
msg "build: TLS 1.3 only from default, only PSK ephemeral key exchange mode"
scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_ENABLED
scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_EPHEMERAL_ENABLED
scripts/config.py unset MBEDTLS_X509_CRT_PARSE_C
scripts/config.py unset MBEDTLS_X509_RSASSA_PSS_SUPPORT
scripts/config.py unset MBEDTLS_SSL_SERVER_NAME_INDICATION
scripts/config.py unset MBEDTLS_ECDSA_C
scripts/config.py unset MBEDTLS_PKCS1_V21
scripts/config.py unset MBEDTLS_PKCS7_C
scripts/config.py set MBEDTLS_SSL_EARLY_DATA
make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'"
msg "test_suite_ssl: TLS 1.3 only, only PSK ephemeral key exchange mode"
cd tests; ./test_suite_ssl; cd ..
msg "ssl-opt.sh: TLS 1.3 only, only PSK ephemeral key exchange mode"
tests/ssl-opt.sh
}
component_test_tls13_only_psk_ephemeral_ffdh () {
msg "build: TLS 1.3 only from default, only PSK ephemeral ffdh key exchange mode"
scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_ENABLED
scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_EPHEMERAL_ENABLED
scripts/config.py unset MBEDTLS_X509_CRT_PARSE_C
scripts/config.py unset MBEDTLS_X509_RSASSA_PSS_SUPPORT
scripts/config.py unset MBEDTLS_SSL_SERVER_NAME_INDICATION
scripts/config.py unset MBEDTLS_ECDSA_C
scripts/config.py unset MBEDTLS_PKCS1_V21
scripts/config.py unset MBEDTLS_PKCS7_C
scripts/config.py set MBEDTLS_SSL_EARLY_DATA
scripts/config.py unset MBEDTLS_ECDH_C
make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'"
msg "test_suite_ssl: TLS 1.3 only, only PSK ephemeral ffdh key exchange mode"
cd tests; ./test_suite_ssl; cd ..
msg "ssl-opt.sh: TLS 1.3 only, only PSK ephemeral ffdh key exchange mode"
tests/ssl-opt.sh
}
component_test_tls13_only_psk_all () {
msg "build: TLS 1.3 only from default, without ephemeral key exchange mode"
scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_EPHEMERAL_ENABLED
scripts/config.py unset MBEDTLS_X509_CRT_PARSE_C
scripts/config.py unset MBEDTLS_X509_RSASSA_PSS_SUPPORT
scripts/config.py unset MBEDTLS_SSL_SERVER_NAME_INDICATION
scripts/config.py unset MBEDTLS_ECDSA_C
scripts/config.py unset MBEDTLS_PKCS1_V21
scripts/config.py unset MBEDTLS_PKCS7_C
scripts/config.py set MBEDTLS_SSL_EARLY_DATA
make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'"
msg "test_suite_ssl: TLS 1.3 only, PSK and PSK ephemeral key exchange modes"
cd tests; ./test_suite_ssl; cd ..
msg "ssl-opt.sh: TLS 1.3 only, PSK and PSK ephemeral key exchange modes"
tests/ssl-opt.sh
}
component_test_tls13_only_ephemeral_all () {
msg "build: TLS 1.3 only from default, without PSK key exchange mode"
scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_ENABLED
scripts/config.py set MBEDTLS_SSL_EARLY_DATA
make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'"
msg "test_suite_ssl: TLS 1.3 only, ephemeral and PSK ephemeral key exchange modes"
cd tests; ./test_suite_ssl; cd ..
msg "ssl-opt.sh: TLS 1.3 only, ephemeral and PSK ephemeral key exchange modes"
tests/ssl-opt.sh
}
component_test_tls13_no_padding () {
msg "build: default config plus early data minus padding"
scripts/config.py set MBEDTLS_SSL_CID_TLS1_3_PADDING_GRANULARITY 1
scripts/config.py set MBEDTLS_SSL_EARLY_DATA
CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: default config plus early data minus padding"
make test
msg "ssl-opt.sh (TLS 1.3 no padding)"
tests/ssl-opt.sh
}
component_test_tls13_no_compatibility_mode () {
msg "build: default config plus early data minus middlebox compatibility mode"
scripts/config.py unset MBEDTLS_SSL_TLS1_3_COMPATIBILITY_MODE
scripts/config.py set MBEDTLS_SSL_EARLY_DATA
CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: default config plus early data minus middlebox compatibility mode"
make test
msg "ssl-opt.sh (TLS 1.3 no compatibility mode)"
tests/ssl-opt.sh
}
component_test_full_minus_session_tickets() {
msg "build: full config without session tickets"
scripts/config.py full
scripts/config.py unset MBEDTLS_SSL_SESSION_TICKETS
scripts/config.py unset MBEDTLS_SSL_EARLY_DATA
CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
make
msg "test: full config without session tickets"
make test
msg "ssl-opt.sh (full config without session tickets)"
tests/ssl-opt.sh
}
component_test_memsan () {
msg "build: MSan (clang)" # ~ 1 min 20s
scripts/config.py unset MBEDTLS_AESNI_C # memsan doesn't grok asm
CC=clang cmake -D CMAKE_BUILD_TYPE:String=MemSan .
make
msg "test: main suites (MSan)" # ~ 10s
make test
msg "test: metatests (MSan)"
tests/scripts/run-metatests.sh any msan
msg "program demos (MSan)" # ~20s
tests/scripts/run_demos.py
msg "test: ssl-opt.sh (MSan)" # ~ 1 min
tests/ssl-opt.sh
# Optional part(s)
if [ "$MEMORY" -gt 0 ]; then
msg "test: compat.sh (MSan)" # ~ 6 min 20s
tests/compat.sh
fi
}
component_release_test_valgrind () {
msg "build: Release (clang)"
# default config, in particular without MBEDTLS_USE_PSA_CRYPTO
CC=clang cmake -D CMAKE_BUILD_TYPE:String=Release .
make
msg "test: main suites, Valgrind (default config)"
make memcheck
# Optional parts (slow; currently broken on OS X because programs don't
# seem to receive signals under valgrind on OS X).
# These optional parts don't run on the CI.
if [ "$MEMORY" -gt 0 ]; then
msg "test: ssl-opt.sh --memcheck (default config)"
tests/ssl-opt.sh --memcheck
fi
if [ "$MEMORY" -gt 1 ]; then
msg "test: compat.sh --memcheck (default config)"
tests/compat.sh --memcheck
fi
if [ "$MEMORY" -gt 0 ]; then
msg "test: context-info.sh --memcheck (default config)"
tests/context-info.sh --memcheck
fi
}
component_release_test_valgrind_psa () {
msg "build: Release, full (clang)"
# full config, in particular with MBEDTLS_USE_PSA_CRYPTO
scripts/config.py full
CC=clang cmake -D CMAKE_BUILD_TYPE:String=Release .
make
msg "test: main suites, Valgrind (full config)"
make memcheck
}
component_build_zeroize_checks () {
msg "build: check for obviously wrong calls to mbedtls_platform_zeroize()"
scripts/config.py full
# Only compile - we're looking for sizeof-pointer-memaccess warnings
make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/user-config-zeroize-memset.h\"' -DMBEDTLS_TEST_DEFINES_ZEROIZE -Werror -Wsizeof-pointer-memaccess"
}
component_test_psasim () {
msg "build server library and application"
scripts/config.py crypto
helper_psasim_config server
helper_psasim_build server
helper_psasim_cleanup_before_client
msg "build library for client"
helper_psasim_config client
helper_psasim_build client
msg "build basic psasim client"
make -C tests/psa-client-server/psasim CFLAGS="$ASAN_CFLAGS" LDFLAGS="$ASAN_CFLAGS" test/psa_client_base
msg "test basic psasim client"
tests/psa-client-server/psasim/test/run_test.sh psa_client_base
msg "build full psasim client"
make -C tests/psa-client-server/psasim CFLAGS="$ASAN_CFLAGS" LDFLAGS="$ASAN_CFLAGS" test/psa_client_full
msg "test full psasim client"
tests/psa-client-server/psasim/test/run_test.sh psa_client_full
make -C tests/psa-client-server/psasim clean
}
component_test_suite_with_psasim () {
msg "build server library and application"
helper_psasim_config server
# Modify server's library configuration here (if needed)
helper_psasim_build server
helper_psasim_cleanup_before_client
msg "build client library"
helper_psasim_config client
# PAKE functions are still unsupported from PSASIM
scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_JPAKE
scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED
helper_psasim_build client
msg "build test suites"
make PSASIM=1 CFLAGS="$ASAN_CFLAGS" LDFLAGS="$ASAN_CFLAGS" tests
helper_psasim_server kill
helper_psasim_server start
# psasim takes an extremely long execution time on some test suites so we
# exclude them from the list.
SKIP_TEST_SUITES="constant_time_hmac,lmots,lms"
export SKIP_TEST_SUITES
msg "run test suites"
make PSASIM=1 test
helper_psasim_server kill
}
View Git Blame Copy Permalink