Imported targets are highly preferred over the individual variables
for includes and libs because they will be used in a coherent way
and any spelling mistakes or unavailability won't go unnoticed.
Also it will prevent bugs like conan-io/conan-center-index#16900
or using mismatching header/libs combinations.
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Solving issue #110. The original work is at !231
Some changes were needed because the newly added features in master through time
Signed-off-by: Mohammad Shehar Yaar Tausif <sheharyaar48@gmail.com>
Signed-off-by: Norbert Pocs <npocs@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Adjust some subtle usage of argv string handling in the pkd
test options: rather than conditionally overwrite the two
mkdtemp strings with a newly-allocated buffer to be later
freed, keep the original const argv pointer around in its
own dedicated field.
See also these changes in the same area that were due to the
previous arrangement, which was a bit too subtle:
- 61ce3310b864802a101cb01ff103f0bc2da936e6
- e1a8b359c1
Addresses:
- https://gitlab.com/libssh/libssh-mirror/-/merge_requests/320#note_1173911211
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Use the new `-L` flag for the pkd tests so that they use a
unique temporary directory for scratch space while running.
Note the choice of `pkd_scratch_XXXXXX` in contrast to a
path living under `/tmp`: by using a relative path, one can
gather the full set of log artifacts from the GitLab CI jobs
in the event that there is a test failure. The logs contain
lots of information to help pinpoint what went wrong.
Resolves https://gitlab.com/libssh/libssh-mirror/-/issues/143.
Testing notes:
- In the GitLab CI jobs I can see the flag being used, and
can observe that I am able to gather the full set of
detailed `pkd` logs in the event of a legitimate test
failure.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Teach `pkd` a new flag `-L, --temp-dir=<mkdtemp-template>` to enable
behavior whereby `pkd` creates a new temporary directory and uses it
for a workspace while running.
The original design of `pkd` assumed that it could freely use the
current working directory from wherever it happened to be invoked.
But, this could pose a problem when multiple `pkd` instances are run
in parallel from the same working directory, due to the usage of
various temporary files within that directory.
To avoid the problem of multiple `pkd` instances interfering with
each other, expose a `-L` flag for optionally specifying a `mkdtemp`
template string such that a temporary scratch space is used instead.
Testing notes:
- I ran handfuls of iterations locally using the new flag
and observed `pkd` is indeed using scratch space as desired.
Resolves https://gitlab.com/libssh/libssh-mirror/-/issues/143.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Relax the `pthread_kill` result assertion in `pkd_stop` to tolerate
`ESRCH`, and guard against only `EINVAL` and `ENOTSUP`.
On macOS what can happen is that the `pthread_kill` returns `ESRCH` due
to the accept thread being already terminated. For that case, the
teardown path should proceed to `pthread_join`.
Testing notes:
- On my macOS setup I consistently encountered `ESRCH` in this
codepath, causing pkd tests to fail unnecessarily. With the
change, I observe the tests passing.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
In e1a8b359c1 a missing `free` was
added to `pkd_cleanup_socket_wrapper` to free a string allocated
for the socket wrapper directory name.
Move that `free` such that it also runs in the error-out paths in
`pkd_cleanup_socket_wrapper`, to avoid a leak in those cases, too.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
The error was the following
/builds/libssh/libssh-mirror/examples/sshnetcat.c:241:18: error: a function
declaration without a prototype is deprecated in all versions of C
[-Werror,-Wstrict-prototypes]
void cleanup_pcap(){
^
void
and similar
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Contaminated errno can happen before strtoul call, thereofore
cleaning it before the call.
The errno is not used for checking later in code if fail happens,
therefore cleaning it right after error.
Signed-off-by: Norbert Pocs <npocs@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
These are disabled in latest since Dropbear 2020.79, while
older do not support anything better than aes-ctr ciphers.
We should implement some dynamic algorithm detection for dropbear
too to increase test coverage.
https://bugs.libssh.org/T252
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Set the cmake project verision to the autogenerated file to have a single
point to set the version. This will be included in the libssh.h file.
Pair-Programmed-With: Andreas Schneider <asn@cryptomilk.org>
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Andreas Schneider <asn@cryptomilk.org>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
This is only compiled for tests and fuzzers!
Signed-off-by: Andreas Schneider <asn@cryptomilk.org>
Reviewed-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
In pkd tests, avoid processing the global server configuration file.
This is to allow testing with algorithms not allowed in the global
server configuration.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This was introduced during fixes to run pkd tests in FIPS mode.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
When running in FIPS mode, the OpenSSH version is not the first string
printed by "ssh -V". This makes the parser to find the first occurrence
of the version ignoring anything printed before it.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Previously the server in pkd tests would not accept certificates using
SHA2 in signatures.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Use only allowed algorithms in FIPS mode.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Previously, when no methods were set, the server would enable all
supported methods. This changes this behaviour by setting only the
default methods.
The server in pkd_daemon.c was changed to set explicitly all the
supported methods to keep the previous behaviour.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Fix a bug with server-side rekeying where the session state at hand
has been toggled to SSH_SESSION_STATE_AUTHENTICATED before performing
the packet send of the SSH2_MSG_USERAUTH_SUCCESS message.
Before this change, what can happen is that during the packet send,
the SSH2_MSG_USERAUTH_SUCCESS message can end up being queued due
to a small rekey data limit value. libssh server will then proceed
to attempt to send KEX-related rekeying messages to the client before
the client has received USERAUTH_SUCCESS. OpenSSH clients do not
expect to undergo rekeying before having been authenticated, and so
will exit with error when this happens.
The behavior before and after can be observed with the pkd test making
use of its new --rekey flag:
./pkd_hello -t torture_pkd_openssh_rsa_rsa_default -i1 --rekey=16 -v -v -v
A new CMake test entry is added for the above variation and can be run
with:
ARGS="-R pkd_hello_rekey" make test
Before the fix, the test will fail; after, the test succeeds while
performing rekeying once every 16 bytes.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Support an optional --rekey input to set the SSH session rekey data
limit using SSH_OPTIONS_REKEY_DATA. This flag can be used together
with --buffer to test out server rekeying.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Support an optional --buffer input for the pkd tests to enable testing
with a larger payload than the default "hello\n".
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Move the pkd test payload buffer into the arguments struct, to make
way for parameterizing the payload using command-line options.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This adds the OpenSSH HMACs that do encrypt then mac. This is a more
secure mode than the original HMAC. Newer AEAD ciphers like chacha20 and
AES-GCM are already encrypt-then-mac, but this also adds it for older
legacy clients that don't support those ciphers yet.
Signed-off-by: Dirkjan Bussink <d.bussink@gmail.com>
Reviewed-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Add four passes to the pkd tests to exercise codepaths where an
OpenSSH client requests these HostKeyAlgorithms combinations:
* rsa-sha2-256
* rsa-sha2-512
* rsa-sha2-256,rsa-sha2-512
* rsa-sha2-512,rsa-sha2-256
The tests demonstrate that the third combination currently fails:
libssh ends up choosing `rsa-sha2-512` instead of `rsa-sha2-256`,
and the initial exchange fails on the client side citing a signature
failure.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
