Solving issue #110. The original work is at !231
Some changes were needed because the newly added features in master through time
Signed-off-by: Mohammad Shehar Yaar Tausif <sheharyaar48@gmail.com>
Signed-off-by: Norbert Pocs <npocs@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Adjust some subtle usage of argv string handling in the pkd
test options: rather than conditionally overwrite the two
mkdtemp strings with a newly-allocated buffer to be later
freed, keep the original const argv pointer around in its
own dedicated field.
See also these changes in the same area that were due to the
previous arrangement, which was a bit too subtle:
- 61ce3310b864802a101cb01ff103f0bc2da936e6
- e1a8b359c1
Addresses:
- https://gitlab.com/libssh/libssh-mirror/-/merge_requests/320#note_1173911211
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Teach `pkd` a new flag `-L, --temp-dir=<mkdtemp-template>` to enable
behavior whereby `pkd` creates a new temporary directory and uses it
for a workspace while running.
The original design of `pkd` assumed that it could freely use the
current working directory from wherever it happened to be invoked.
But, this could pose a problem when multiple `pkd` instances are run
in parallel from the same working directory, due to the usage of
various temporary files within that directory.
To avoid the problem of multiple `pkd` instances interfering with
each other, expose a `-L` flag for optionally specifying a `mkdtemp`
template string such that a temporary scratch space is used instead.
Testing notes:
- I ran handfuls of iterations locally using the new flag
and observed `pkd` is indeed using scratch space as desired.
Resolves https://gitlab.com/libssh/libssh-mirror/-/issues/143.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Support an optional --rekey input to set the SSH session rekey data
limit using SSH_OPTIONS_REKEY_DATA. This flag can be used together
with --buffer to test out server rekeying.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Move the pkd test payload buffer into the arguments struct, to make
way for parameterizing the payload using command-line options.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
This adds support for the ed25519 keys in the pkd framework and adds
openssh-only tests utilizing these host keys (dropbear does not support
them yet).
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Use the socket_wrapper preload shim when running the `pkd_hello`
test with `make test`. The end goal here is to get this test
running alongside normal tests in regular CI. Changes to do
this:
* Configure PKD_ENVIRONMENT for the `pkd_hello_i1` test in the
CMakeLists.txt file.
* Add a `--socket-wrapper-dir|-w` flag that is used to opt-in to
initializing a SOCKET_WRAPPER_DIR as expected by the socket_wrapper
library.
A runtime flag is used here to make it easy to run `pkd_hello`
with the socket_wrapper library while avoiding a hard dependency.
Testing done: observed socker_wrapper in effect with `strace`;
running `make test` uses the wrapper correctly on my local
machine.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Ensure to include config.h so that the `HAVE_DSA` value is properly set
when building the pkd tests.
Introduced with 778652460f,
Testing done: with this change, the `pkd_hello` test is passing on an
OpenSSL 1.1.0 build for me. Previously it would fail pubkey exchange
early on for DSA- and ECDSA-type host keys.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Summary:
This patch adds support for mbedTLS as a crypto backend for libssh.
mbedTLS is an SSL/TLS library that has been designed to mainly be used
in embedded systems. It is loosely coupled and has a low memory
footprint. mbedTLS also provides a cryptography library (libmbedcrypto)
that can be used without the TLS modules.
The patch is unfortunately quite big, since several new files had to
be added.
DSA is disabled at compile time, since mbedTLS doesn't support DSA
Patch review and feedback would be appreciated, and if any issues or
suggestions appear, I'm willing to work on them.
Signed-off-by: Juraj Vijtiuk <juraj.vijtiuk@sartura.hr>
Test Plan:
* The patch has been tested with a Debug and MinSizeRel build, with
libssh unit tests, client tests and the pkd tests.
* All the tests have been run with valgrind's memcheck, drd and helgrind
tools.
* The examples/samplessh client works when built with the patch.
Reviewers: asn, aris
Subscribers: simonsj
Differential Revision: https://bugs.libssh.org/D1
Summary:
Hello, resending this patch series for the `pkd` tests, originally
sent to the mailing list here:
* https://www.libssh.org/archive/libssh/2017-07/0000011.html
Here are a few improvements and fixups for the `pkd` tests, including
a new flag `-m` that can be used to run only certain subsets of the
test passes.
Jon Simons (5):
pkd: rename AES192 cipher suite -> OPENSSHONLY
pkd_daemon.c: mark `pkd_ready` field as volatile
pkd: fixups for updated CMocka CMUnitTest struct
pkd: refactor -t testname lookup-by-name
pkd: support -m to match multiple tests
tests/pkd/pkd_daemon.c | 2 +-
tests/pkd/pkd_daemon.h | 1 +
tests/pkd/pkd_hello.c | 84 +++++++++++++++++++++++++++++++++-----------------
3 files changed, 58 insertions(+), 29 deletions(-)
--
Test Plan:
* I've been using the new `-m` mode locally for a long time to run
only certain groups of tests.
* The CMocka struct fixes can be seen in the pkd output before and
after: after, there are no more extraneous test output strings.
* The fix for the `pkd_ready` field can be observed when building
the libssh tests with `-Os` on a Debian system (before the fix,
pkd would hang, after the fix, it runs as intended).
Reviewers: asn
Reviewed By: asn
Tags: #libssh
Differential Revision: https://bugs.libssh.org/D2
Introduce a sample public-key testing daemon to the 'pkd' test directory,
and add support code for cycling through various combinations of different
key exchange, cipher, and MAC algorithms.
The goal of the 'pkd_hello' test is to make it easy to test interactions
between non-libssh clients and a libssh-server, and to provide a starting
point for testing new implementations for key types, ciphers, MACs, and
so on. The thinking is that testing a new algorithm should be as simple
as adding a new line for it in the PKDTESTS_* lists.
Macros are used to generate the tests and helper functions for a couple of
clients -- here, OpenSSH and dropbear are included for the first cut. If
binaries are found for these clients, their test lists will be enabled;
when binaries are not found for a given client, those tests are skipped.
Tests are run in one large batch by default, but can also be run individually
to help with tracking down things like signature bugs that may take many
iterations to reproduce.
Each test logs its stdout and stderr to its own file, which is cleaned up
when a test succeeds. For failures, those logs can be combined with verbose
libssh output from pkd itself to start debugging things.
Some example usages:
pkd_hello
Run all tests with default number of iterations.
pkd_hello --list
List available individual test names.
pkd_hello -i 1000 -t torture_pkd_openssh_ecdsa_256_ecdh_sha2_nistp256
Run only the torture_pkd_openssh_ecdsa_256_ecdh_sha2_nistp256
testcase 1000 times.
pkd_hello -v -v -v -v -e -o
Run all tests with maximum libssh and pkd logging.
Included in the tests are passes for all existing kex, cipher, and MAC
algorithms.
BUG: https://red.libssh.org/issues/144
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
