Previously, lines requested by name could also be referred to by offset
when calling LineRequest.reconfigure_lines. However, lines requested by
offset could not be reconfigured by name if they had one.
Now, the name map is populated if the line has a name regardless of if
it's requested by name or offset.
To make behavior as consistent with earlier versions as possible, a line
requested by name always returns the first line on the chip with that
name. If there are duplicate line names and lines are requested by
offset, the first line in the request is mapped to the name. A line
requested by name always overrides a name mapped via an offset request.
If lines 0-3 all have the same name and a config object looks like:
{("foo", 1, 2): None}
or
{(1, "foo", 2): None}
Then lines 0-2 are requested and line 0 can be reconfigured by name.
If the config object looks like:
{(1, 2): None}
Then lines 1 and 2 are requested and line 1 can be reconfigured by name.
Signed-off-by: Vincent Fazio <vfazio@gmail.com>
Link: https://lore.kernel.org/r/20251009130516.3729433-9-vfazio@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Previously, a check was performed to prevent requests that included
duplicative lines.
While this provided quick feedback on erroneous requests, it penalized
callers that had a good config due to the over head of iterating the
config multiple times.
Now, duplicate check is performed as the config object is iterated.
Signed-off-by: Vincent Fazio <vfazio@gmail.com>
Link: https://lore.kernel.org/r/20251009130516.3729433-5-vfazio@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Previously, an offset map was maintained to lookup the name used to
request a line so that a list could be generated that reflected the
identifier used to request a given line.
For example, if a config looked like {0: None, ("foo", "bar"): None}, the
LineRequest.lines property would contain [0, "foo", "bar"].
Now, the line identifier is tracked in request order as the config
object is iterated to avoid maintaining an offset map.
Signed-off-by: Vincent Fazio <vfazio@gmail.com>
Link: https://lore.kernel.org/r/20251009130516.3729433-4-vfazio@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Previously, Chip.request_lines and LineRequest.reconfigure_lines
iterated over a config object but did so in subtly different ways.
Create a generator that iterates over a config object and returns line +
settings pairs. Update the aforementioned functions to use the generator
to consolidate and condense code.
Signed-off-by: Vincent Fazio <vfazio@gmail.com>
Link: https://lore.kernel.org/r/20251009130516.3729433-2-vfazio@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
When `chip.request_lines` was modified to allow `Iterable`s instead of
only `tuple`s, the code that checked for duplicate line entries in the
`config` argument was not updated to account for the expanded types.
If the `config` argument had a key that was not a `tuple`, `str`, or
`int`, a `TypeError` would be raised when resolving the line offset.
Refactor the code the resolves IDs to offsets into a separate function
to make the logic a bit clearer and to account for the widened types.
Fixes: 8f62e6c453 ("bindings: python: loosen type requirements in public API")
Closes: https://github.com/brgl/libgpiod/issues/148
Signed-off-by: Vincent Fazio <vfazio@gmail.com>
Link: https://lore.kernel.org/r/20250902123905.6491-1-vfazio@gmail.com
[Bartosz: don't pass the only argument by name in the call to
_resolve_config_keys_to_offsets()]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Certain polling APIs in the standard library - most notably: the
select() function and the poll class - allow to poll any object that
implements the fileno() method returning the underlying file descriptor
number.
Implement fileno() for Chip and LineRequest which allows users to do:
rd, _, _ = select([chip/request], [], [], 1)
where rd will contain the actual object passed to select which makes for
easier reading of events afterwards.
Reviewed-by: Vincent Fazio <vfazio@xes-inc.com>
Link: https://lore.kernel.org/r/20241211-python-fileno-v2-1-84c642572485@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Since their inclusion in Python 3.6, f-strings have become the preferred
way to format strings with variable values as they are generally more
readable as the value substitution is in place and doesn't have to be
parsed from the list or arguments to `.format()`.
Where it does not impact readability (when the line is <120 characters),
swap usage of `.format()` to an f-string.
For lines that are not converted, inform the linter to ignore attempts
to upgrade those instances to f-strings [0]
[0]: https://docs.astral.sh/ruff/rules/f-string/
Signed-off-by: Vincent Fazio <vfazio@xes-inc.com>
Link: https://lore.kernel.org/r/20241114145116.2123714-15-vfazio@xes-inc.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Since `Chip._chip` is typed to be `Optional` and because type checkers
may not be able to infer that an object is not `None` from an earlier
call (such as `_check_closed`) it is necessary to inform type checkers
of the state of the object to silence union-attr [0] errors.
Instead of littering the code with "# type: ignore" comments, use casts
to inform type checkers that objects are not `None`.
Using `assert` is another option, however this duplicates the logic in
`_check_closed` so is redundant at best and, at worst, is not a safe
replacement as `assert` can be elided in optimized Python environments
and these checks need to be runtime enforced.
[0]: https://mypy.readthedocs.io/en/stable/error_code_list.html#check-that-attribute-exists-in-each-union-item-union-attr
Signed-off-by: Vincent Fazio <vfazio@xes-inc.com>
Link: https://lore.kernel.org/r/20241114145116.2123714-10-vfazio@xes-inc.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Previously, `Chip.request_lines` and `LineRequest.reconfigure_lines`
were typed to accept a config argument that was either an int, a str,
or a tuple[int | str].
This had two downsides, namely:
* The tuple was typed as having only a single element and not a variable
number of elements. The examples and test suite relied on a variable
length tuple.
* The tuple type itself was overly restictive. The function
implementations had no requirement that the value be a tuple, only
that it was iterable if it was not a str or an int.
Now, these functions accept an Iterable[int | str] instead of tuples to
offer greater flexibility to callers.
This change does not break compatibility for existing users.
Closes: https://github.com/brgl/libgpiod/issues/102
Signed-off-by: Vincent Fazio <vfazio@xes-inc.com>
Link: https://lore.kernel.org/r/20241114145116.2123714-4-vfazio@xes-inc.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
We no longer use the select module directly in chip.py so drop the
unneeded import.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
When multiple entries are requested using line names in
Chip.request_lines(), only the the last entry is added to
LineRequest._name_map, causing a ValueError when trying to use functions
like LineRequest.set_value() on any former entries.
Move the required variables to the correct scope.
Signed-off-by: Chuang Zhu <git@chuang.cz>
[Bartosz: tweak the commit message]
Co-developed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20240710125719.33655-2-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The __repr__() function should - if possible - return a valid Python
expression that can be used to instantiate a new object when evaluated.
LineSettings.__repr__() is missing comas between arguments. Both Chip and
LineSettings also don't prefix the returned string with 'gpiod.'. Fix
both functions and add more test cases - including actually using the
strings returned by __repr__() to create new objects and compare their
contents.
Reported-by: Robert Thomas <rob.thomas@raspberrypi.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Provide a wrapper around gpiod_line_request_get_chip_name() for Python
bindings and update the tests.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
We're currently unintentionally exporting a bunch of symbols that should
remain local to sub-modules. Use __all__ where appropriate so that we
don't re-export standard library functions such as select() etc. in the
gpiod module.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The docs don't mention it but currently passing None as the timeout to
one of the event wait methods works like passing 0 to select() - the wait
method returns immediately. Change it to a more standard behavior - None
makes the method block indefinitely until an event becomes available for
reading.
This is a slight change in the behavior but let's hope nobody complains
as libgpiod v2 is still pretty recent and its adoption is (hopegully)
not wide-spread yet.
Reported-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Suggested-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Kent Gibson <warthog618@gmail.com>
Add a new optional argument to Chip.request_lines() called output_values.
It accepts a dictionary of mappings between line names or offsets to the
output values the requested lines should be set to at request-time.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This commit is the result of a squash of all the commits created during
the development of libgpiod v2. This is done to preserve bisectability
of the git tree. It contains significant re-writes of the core C library
as well as C++ and python bindings. The tools have been adjusted to work
with the new API but have not undergone significant changes yet.
This commit contains the bulk of the work on libgpiod v2 but the
development continues with more changes planned.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
[Ben: fix format specifier for uint64_t]
Signed-off-by: Ben Hutchings <ben.hutchings@mind.be>
[Viresh: Fix ioctl number for gpiod_line_request_reconfigure_lines()]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
[Kent: bug fixes, improvements, better pointer contracts, type strictness]
Signed-off-by: Kent Gibson <warthog618@gmail.com>
