- Add ARROWLAKE model detection.
- Add PANTHERLAKE model detection.
- Add CLEARWATERFOREST model detection.
Intel® Architecture Instruction Set Extensions Programming Reference
https://cdrdv2.intel.com/v1/dl/getContent/671368 Section 1.2.
No regression, validated model detection on SDE.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
This is only needed for -mno-secure-plt, and this linkage mode
is not supported with powerpc64 and powerp64le.
Reviewed-by: Peter Bergner <bergner@linux.ibm.com>
As mentioned by the reporter in a pull request against gcc-mirror,
the THREEp96 constant in e_expl.c is incorrect, it is actually 0x3.p+94f128
rather than 0x3.p+96f128.
The algorithm uses that to compute the t2 integer (tval2), by whose
delta it adjusts the x+xl pair and then in the result uses the precomputed
exp value for that entry.
Using 0x3.p+94f128 rather than 0x3.p+96f128 results in tval2 sometimes
being one smaller, sometimes one larger than the desired value, thus can mean
the x+xl pair after adjustment will be larger in absolute value than it
should be.
DesWursters created a test program for this
https://github.com/DesWurstes/comparefloats
and his results were
total: 1135000000 not_equal: 4322 earlier_score: 674 later_score: 3648
I've modified this so with
https://sourceware.org/bugzilla/show_bug.cgi?id=32411#c3
so that it actually tests pseudo-random _Float128 values with range
(-16384.,16384) with strong bias on values larger than 0.0002 in absolute
value (so that tval1/tval2 aren't zero most of the time) and that gave
total: 10000000000 not_equal: 29861 earlier_score: 4606 later_score: 25255
So, in both cases, in most cases the change doesn't result in any differences,
and in those rare cases where does, about 85% have smaller ulp than without
the patch.
Additionally I've tried
https://sourceware.org/bugzilla/show_bug.cgi?id=32411#c4
and in 2 billion iterations it didn't find any case where x+xl after the
adjustments without this change would be smaller in absolute value compared
to x+xl after the adjustments with this change.
Reviewed-by: Joseph Myers <josmyers@redhat.com>
From the bug report [1], multiple programs still require to dlopen
shared libraries with either missing PT_GNU_STACK or with the executable
bit set. Although, in some cases, it seems to be a hard-craft assembly
source without the required .note.GNU-stack marking (so the static linker
is forced to set the stack executable if the ABI requires it), other
cases seem that the library uses trampolines [2].
Unfortunately, READ_IMPLIES_EXEC is not an option since on some ABIs
(x86_64), the kernel clears the bit, making it unsupported. To avoid
reinstating the broken code that changes stack permission on dlopen
(0ca8785a28), this patch extends the glibc.rtld.execstack tunable to
allow an option to force an executable stack at the program startup.
The tunable is a security issue because it defeats the PT_GNU_STACK
hardening. It has the slight advantage of making it explicit by the
caller, and, as for other tunables, this is disabled for setuid binaries.
A tunable also allows us to eventually remove it, but from previous
experiences, it would require some time.
Checked on aarch64-linux-gnu, x86_64-linux-gnu, and i686-linux-gnu.
[1] https://sourceware.org/bugzilla/show_bug.cgi?id=32653
[2] https://github.com/conda-forge/ctng-compiler-activation-feedstock/issues/143
Reviewed-by: Sam James <sam@gentoo.org>
C2Y adds unsigned versions of the abs functions (see C2Y draft N3467 and
proposal N3349).
Tested for x86_64.
Signed-off-by: Lenard Mollenkopf <glibc@lenardmollenkopf.de>
Scan xstate IDs up to the maximum supported xstate ID. Remove the
separate AMX xstate calculation. Instead, exclude the AMX space from
the start of TILECFG to the end of TILEDATA in xsave_state_size.
Completed validation on SKL/SKX/SPR/SDE and compared xsave state size
with "ld.so --list-diagnostics" option, no regression.
Co-Authored-By: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Sunil K Pandey <skpgkp2@gmail.com>
If the input buffer exceeds the stack auxiliary buffer, qsort will
malloc a temporary one to call mergesort. Since C++ standard does
allow the callback comparison function to throw [1], the glibc
implementation can potentially leak memory.
The fixes uses a pthread_cleanup_combined_push and
pthread_cleanup_combined_pop, so it can work with and without
exception enables. The qsort code path that calls malloc now
requires some extra setup and a call to __pthread_cleanup_push
anmd __pthread_cleanup_pop (which should be ok since they just
setup some buffer state).
Checked on x86_64-linux-gnu.
[1] https://timsong-cpp.github.io/cppwp/n4950/alg.c.library#4
Reviewed-by: DJ Delorie <dj@redhat.com>
We mistakenly dropped the check in 27b96e069aad17cefea9437542180bff448ac3a0;
there's some other checks which we *can* drop, but let's worry about that
later.
Fixes the build on ppc64le where GCC is configured with --with-long-double-format=ieee.
Reviewed-by: Andreas Schwab <schwab@suse.de>
Linux 6.14 has no new syscalls. Update the version number in
syscall-names.list to reflect that it is still current for 6.14.
Tested with build-many-glibcs.py.
This fixes a test build failure on Hurd.
Fixes commit 145097dff1 ("x86: Use separate
variable for TLSDESC XSAVE/XSAVEC state size (bug 32810)").
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
When libgcc is built with pac-ret, it requires to autenticate the
unwinding frame based on CFI information. The _dl_tlsdesc_dynamic
uses a custom calling convention, where it is responsible to save
and restore all registers it might use (even volatile).
The pac-ret support added by 1be3d6eb82
was added only on the slow-path, but the fast path also adds DWARF
Register Rule Instruction (cfi_adjust_cfa_offset) since it requires
to save/restore some auxiliary register. It seems that this is not
fully supported neither by libgcc nor AArch64 ABI [1].
Instead, move paciasp/autiasp to function prologue/epilogue to be
used on both fast and slow paths.
I also corrected the _dl_tlsdesc_dynamic comment description, it was
copied from i386 implementation without any adjustment.
Checked on aarch64-linux-gnu with a toolchain built with
--enable-standard-branch-protection on a system with pac-ret
support.
[1] https://github.com/ARM-software/abi-aa/blob/main/aadwarf64/aadwarf64.rst#id1
Reviewed-by: Yury Khrustalev <yury.khrustalev@arm.com>
Previously, the initialization code reused the xsave_state_full_size
member of struct cpu_features for the TLSDESC state size. However,
the tunable processing code assumes that this member has the
original XSAVE (non-compact) state size, so that it can use its
value if XSAVEC is disabled via tunable.
This change uses a separate variable and not a struct member because
the value is only needed in ld.so and the static libc, but not in
libc.so. As a result, struct cpu_features layout does not change,
helping a future backport of this change.
Fixes commit 9b7091415a ("x86-64:
Update _dl_tlsdesc_dynamic to preserve AMX registers").
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
If we have to use XSAVE or XSAVEC trampolines, do not adjust the size
information they need. Technically, it is an operator error to try to
run with -XSAVE,-XSAVEC on such builds, but this change here disables
some unnecessary code with higher ISA levels and simplifies testing.
Related to commit befe2d3c4d
("x86-64: Don't use SSE resolvers for ISA level 3 or above").
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Reject invalid formatted scanf real input data the exponent part of
which is comprised of an exponent introducing character, optionally
followed by a sign, and with no actual digits following. Such data is a
prefix of, but not a matching input sequence and it is required by ISO C
to cause a matching failure.
Currently a matching success is instead incorrectly produced along with
the conversion result according to the input significand read and the
exponent of zero, with the significand and the exponent part wholly
consumed from input.
Correct an invalid `tstscanf.c' test accordingly that expects a matching
success for input data provided in the ISO C standard as an example for
a matching failure.
Enable input data that causes test failures without this fix in place.
Reviewed-by: Joseph Myers <josmyers@redhat.com>
Reject invalid formatted scanf real input data that is comprised of a
hexadecimal prefix, optionally preceded by a sign, and with no actual
digits following owing to the field width restriction in effect. Such
data is a prefix of, but not a matching input sequence and it is
required by ISO C to cause a matching failure.
Currently a matching success is instead incorrectly produced along with
the conversion result of zero, with the prefix wholly consumed from
input. Where the end of input is marked by the end-of-file condition
rather than the field width restriction in effect a matching failure is
already correctly produced.
Enable input data that causes test failures without this fix in place.
Reviewed-by: Joseph Myers <josmyers@redhat.com>
Reject invalid formatted scanf integer input data that is comprised of a
binary or hexadecimal prefix, optionally preceded by a sign, and with no
actual digits following. Such data is a prefix of, but not a matching
input sequence and it is required by ISO C to cause a matching failure.
Currently a matching success is instead incorrectly produced along with
the conversion result of zero, with the prefix wholly consumed from
input.
Enable input data that causes test failures without this fix in place.
Reviewed-by: Joseph Myers <josmyers@redhat.com>
Add Makefile infrastructure, a format-specific test skeleton providing a
data comparison implementation that ignores bits of data representation
in memory that do not participate in holding floating-point data, and
`long double' real input data for targets using the Intel/Motorola
80-bit format.
Keep input data disabled and referring to BZ #12701 for entries that are
are currently incorrectly accepted as valid data, such as '0e', '0e+',
'0x', '0x8p', '0x0p-', etc.
Reviewed-by: Joseph Myers <josmyers@redhat.com>
C23 adds various <math.h> function families originally defined in TS
18661-4. Add the pown functions, which are like pow but with an
integer exponent. That exponent has type long long int in C23; it was
intmax_t in TS 18661-4, and as with other interfaces changed after
their initial appearance in the TS, I don't think we need to support
the original version of the interface. The test inputs are based on
the subset of test inputs for pow that use integer exponents that fit
in long long.
As the first such template implementation that saves and restores the
rounding mode internally (to avoid possible issues with directed
rounding and intermediate overflows or underflows in the wrong
rounding mode), support also needed to be added for using
SET_RESTORE_ROUND* in such template function implementations. This
required math-type-macros-float128.h to include <fenv_private.h>, so
it can tell whether SET_RESTORE_ROUNDF128 is defined. In turn, the
include order with <fenv_private.h> included before <math_private.h>
broke loongarch builds, showing up that
sysdeps/loongarch/math_private.h is really a fenv_private.h file
(maybe implemented internally before the consistent split of those
headers in 2018?) and needed to be renamed to fenv_private.h to avoid
errors with duplicate macro definitions if <math_private.h> is
included after <fenv_private.h>.
The underlying implementation uses __ieee754_pow functions (called
more than once in some cases, where the exponent does not fit in the
floating type). I expect a custom implementation for a given format,
that only handles integer exponents but handles larger exponents
directly, could be faster and more accurate in some cases.
I encourage searching for worst cases for ulps error for these
implementations (necessarily non-exhaustively, given the size of the
input space).
Tested for x86_64 and x86, and with build-many-glibcs.py.
Using gcc -Wshift-overflow=2 -Wsystem-headers to compile a file
including <sys/mount.h> will cause a warning since 1 << 31 is undefined
behavior on platforms where int is 32-bits.
Signed-off-by: Collin Funk <collin.funk1@gmail.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Add Makefile infrastructure and IBM 128-bit 'long double' real input for
targets switching between the IEEE 754 binary128 and IBM 128-bit formats
with '-mabi=ieeelongdouble' and '-mabi=ibmlongdouble'. Reuse IEEE 754
binary128 input data but with modified output file names so as not to
clash with the names used for IBM 128-bit format tests made with common
rules for the 'long double' data type.
Keep input data disabled and referring to BZ #12701 for entries that are
are currently incorrectly accepted as valid data, such as '0e', '0e+',
'0x', '0x8p', '0x0p-', etc.
Reviewed-by: Joseph Myers <josmyers@redhat.com>
Add Makefile infrastructure and 64-bit `long double' real input data for
targets switching between the IEEE 754 binary64 and IEEE 754 binary128
formats with `-mlong-double-64' and `-mlong-double-128'. Use modified
output file names for the IEEE 754 binary64 format so as not to clash
with the names used for IEEE 754 binary128 format tests made with common
rules for the 'long double' data type.
Keep input data disabled and referring to BZ #12701 for entries that are
are currently incorrectly accepted as valid data, such as '0e', '0e+',
'0x', '0x8p', '0x0p-', etc.
Reviewed-by: Joseph Myers <josmyers@redhat.com>
Add Makefile infrastructure and `long double' real input data for
targets using the IEEE 754 binary128 format.
Keep input data disabled and referring to BZ #12701 for entries that are
are currently incorrectly accepted as valid data, such as '0e', '0e+',
'0x', '0x8p', '0x0p-', etc.
Reviewed-by: Joseph Myers <josmyers@redhat.com>
Add Makefile infrastructure and `double' real input data for targets
using the IEEE 754 binary64 format.
Keep input data disabled and referring to BZ #12701 for entries that are
are currently incorrectly accepted as valid data, such as '0e', '0e+',
'0x', '0x8p', '0x0p-', etc.
Reviewed-by: Joseph Myers <josmyers@redhat.com>
Add Makefile infrastructure and `float' real input data for targets
using the IEEE 754 binary32 format.
Keep input data disabled and referring to BZ #12701 for entries that are
are currently incorrectly accepted as valid data, such as '0e', '0e+',
'0x', '0x8p', '0x0p-', etc.
Reviewed-by: Joseph Myers <josmyers@redhat.com>
Add Makefile infrastructure and `int' and `long' integer input data,
signed and unsigned, for LP64 targets.
While the size of `int' data is the same between ILP32 and LP64 targets,
resulting scanf output is different between them for out of range input
data and while ISO C and POSIX both say that the behavior is undefined
if the result of the conversion cannot be represented we want to keep
track of our output to prevent inadvertent changes. Hence the use of
distinct `int' integer input data between ILP32 and LP64 targets.
Keep input data disabled and referring to BZ #12701 for entries that are
are currently incorrectly accepted as valid data, such as '0b' or '0x'.
Reviewed-by: Joseph Myers <josmyers@redhat.com>
Add Makefile infrastructure and `int' and `long' integer input data,
signed and unsigned, for ILP32 targets.
While the size of `int' data is the same between ILP32 and LP64 targets,
resulting scanf output is different between them for out of range input
data and while ISO C and POSIX both say that the behavior is undefined
if the result of the conversion cannot be represented we want to keep
track of our output to prevent inadvertent changes. Hence the use of
distinct `int' integer input data between ILP32 and LP64 targets.
Keep input data disabled and referring to BZ #12701 for entries that are
are currently incorrectly accepted as valid data, such as '0b' or '0x'.
Reviewed-by: Joseph Myers <josmyers@redhat.com>
Check the availability of host_get_time64 and use it to replace
host_get_time for CLOCK_REALTIME when it's available. Fall back to
host_get_time if gnumach does not support host_get_time64 but the
gnumach headers do.
host_get_time is deprecated
See https://git.savannah.gnu.org/cgit/hurd/gnumach.git/commit/?id=569df850cd7badd1e36132ad3b44aa76a4d27c25
However, it's kept for backward compactbility.
* config.h.in: Add HAVE_HOST_GET_TIME64 config entry.
* sysdeps/mach/clock_gettime.c: Use host_get_time64 for CLOCK_REALTIME
when it's possible, fall to host_get_time otherwise.
* sysdeps/mach/configure: Check the existence of host_get_time64 RPC.
* sysdeps/mach/configure.ac: Check the existence of host_get_time64 RPC.
Message-ID: <20250324052042.19803-1-zhmingluo@163.com>
cc5d5852c6 ("y2038: Convert aio_suspend to support 64 bit time")
switched from __clock_gettime (CLOCK_REALTIME, &now); to __clock_gettime64
(CLOCK_MONOTONIC, &ts);, but pthread_cond_timedwait is based on the
absolute realtime clock, so migrate to using pthread_cond_clockwait to
select CLOCK_MONOTONIC. Also fix AIO_MISC_WAIT into passing
CLOCK_MONOTONIC to __futex_abstimed_wait64.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Add function __inet_pton_chk which calls __chk_fail when the size of
argument dst is too small. inet_pton is redirected to __inet_pton_chk
or __inet_pton_warn when _FORTIFY_SOURCE is > 0.
Also add tests to debug/tst-fortify.c, update the abilist with
__inet_pton_chk and mention inet_pton fortification in maint.texi.
Co-authored-by: Frédéric Bérat <fberat@redhat.com>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
There are no new constants covered by tst-mman-consts.py,
tst-mount-consts.py or tst-sched-consts.py in Linux 6.13 that need any
header changes, so update the kernel version in those tests.
(tst-pidfd-consts.py will need updating separately along with adding
new constants to glibc.)
Tested with build-many-glibcs.py.
The 7bb8045ec0 path made the '%n' fortify check ignore EMFILE errors
while trying to open /proc/self/maps, and this added a security
issue where EMFILE can be attacker-controlled thus making it
ineffective for some cases.
The EMFILE failure is reinstated but with a different error
message. Also, to improve the false positive of the hardening for
the cases where no new files can be opened, the
_dl_readonly_area now uses _dl_find_object to check if the
memory area is within a writable ELF segment. The procfs method is
still used as fallback.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Arjun Shankar <arjun@redhat.com>
On both Linux and Hurd the __eloop_threshold() is always a constant
(40 and 32 respectively), so there is no need to always call
__sysconf (_SC_SYMLOOP_MAX) for Linux case (!SYMLOOP_MAX). To avoid
a name clash with gnulib, rename the new file min-eloop-threshold.h.
Checked on x86_64-linux-gnu and with a build for x86_64-gnu.
Reviewed-by: DJ Delorie <dj@redhat.com>
- Create the __inet_ntop_chk routine that verifies that the builtin size
of the destination buffer is at least as big as the size given by the
user.
- Redirect calls from inet_ntop to __inet_ntop_chk or __inet_ntop_warn
- Update the abilist for this new routine
- Update the manual to mention the new fortification
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Polynomial order was unnecessarily high, unlocking multiple
optimizations.
Max error for new SVE expf is 0.88 +0.5ULP.
Max error for new SVE coshf is 2.56 +0.5ULP.
Performance improvement on Neoverse V1: expf (30%), coshf (26%).
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
The fread race checker looks for EOF in every thread, which is incorrect
since threads calling fread successfully could lag behind and read the
EOF condition, resulting in multiple threads thinking that they
encountered an EOF.
Only look for EOF condition if fread fails to read a char. Also drop
the clearerr() since it could mask the failure of another reader, thus
hiding a test failure.
Finally, also check for error in the stream for completeness.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
C23 adds various <math.h> function families originally defined in TS
18661-4. Add the powr functions, which are like pow, but with simpler
handling of special cases (based on exp(y*log(x)), so negative x and
0^0 are domain errors, powers of -0 are always +0 or +Inf never -0 or
-Inf, and 1^+-Inf and Inf^0 are also domain errors, while NaN^0 and
1^NaN are NaN). The test inputs are taken from those for pow, with
appropriate adjustments (including removing all tests that would be
domain errors from those in auto-libm-test-in and adding some more
such tests in libm-test-powr.inc).
The underlying implementation uses __ieee754_pow functions after
dealing with all special cases that need to be handled differently.
It might be a little faster (avoiding a wrapper and redundant checks
for special cases) to have an underlying implementation built
separately for both pow and powr with compile-time conditionals for
special-case handling, but I expect the benefit of that would be
limited given that both functions will end up needing to use the same
logic for computing pow outside of special cases.
My understanding is that powr(negative, qNaN) should raise "invalid":
that the rule on "invalid" for an argument outside the domain of the
function takes precedence over a quiet NaN argument producing a quiet
NaN result with no exceptions raised (for rootn it's explicit that the
0th root of qNaN raises "invalid"). I've raised this on the WG14
reflector to confirm the intent.
Tested for x86_64 and x86, and with build-many-glibcs.py.
On SPR, it improves atanh bench performance by:
Before After Improvement
reciprocal-throughput 15.1715 14.8628 2%
latency 57.1941 56.1883 2%
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
When an executable is invoked directly, we calculate $ORIGIN by calling
readlink on /proc/self/exe, which the Linux kernel resolves to the
target of any symlinks. However, if an executable is run through ld.so,
we cannot use /proc/self/exe and instead use the path given as an
argument. This leads to a different calculation of $ORIGIN, which is
most notable in that it causes ldd to behave differently (e.g., by not
finding a library) from directly running the program.
To make the behavior consistent, take advantage of the fact that the
kernel also resolves /proc/self/fd/ symlinks to the target of any
symlinks in the same manner, so once we have opened the main executable
in order to load it, replace the user-provided path with the result of
calling readlink("/proc/self/fd/N").
(On non-Linux platforms this resolution does not happen and so no
behavior change is needed.)
The __fd_to_filename requires _fitoa_word and _itoa_word, which for
32-bits pulls a lot of definitions from _itoa.c (due _ITOA_NEEDED
being defined). To simplify the build move the required function
to a new file, _fitoa_word.c.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Co-authored-by: Geoffrey Thomas <geofft@ldpreload.com>
Reviewed-by: Geoffrey Thomas <geofft@ldpreload.com>
Tested-by: Geoffrey Thomas <geofft@ldpreload.com>
On SPR, it improves sinh bench performance by:
Before After Improvement
reciprocal-throughput 14.2017 11.815 17%
latency 36.4917 35.2114 4%
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
On Skylake, it improves tanh bench performance by:
Before After Improvement
max 110.89 95.826 14%
min 20.966 20.157 4%
mean 30.9601 29.8431 4%
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
The SIGCANCEL signal handler should not issue __syscall_do_cancel,
which calls __do_cancel and __pthread_unwind, if the cancellation
is already in proces (and libgcc unwind is not reentrant). Any
cancellation signal received after is ignored.
Checked on x86_64-linux-gnu and aarch64-linux-gnu.
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
The new initializer and struct layout does not initialize the
__g_signals field in the old struct layout before the change in
commit c36fc50781 ("nptl: Remove
g_refs from condition variables"). Bring back fields at the end
of struct __pthread_cond_s, so that they are again zero-initialized.
Reviewed-by: Sam James <sam@gentoo.org>
The current approach tracks math maximum supported errors by explicitly
setting them per function and architecture. On newer implementations or
new compiler versions, the file is updated with newer values if it
shows higher results. The idea is to track the maximum known error, to
update the manual with the obtained values.
The constant libm-test-ulps shows little value, where it is usually a
mechanical change done by the maintainer, for past releases it is
usually ignored whether the ulp change resulted from a compiler
regression, and the math tests already have a maximum ulp error that
triggers a regression.
It was shown by a recent update after the new acosf [1] implementation
that is correctly rounded, where the libm-test-ulps was indeed from a
compiler issue.
This patch removes all arch-specific libm-test-ulps, adds system generic
libm-test-ulps where applicable, and changes its semantics. The generic
files now track specific implementation constraints, like if it is
expected to be correctly rounded, or if the system-specific has
different error expectations.
Now multiple libm-test-ulps can be defined, and system-specific
overrides generic implementation. This is for the case where
arch-specific implementation might show worse precision than generic
implementation, for instance, the cbrtf on i686.
Regressions are only reported if the implementation shows larger errors
than 9 ulps (13 for IBM long double) unless it is overridden by
libm-test-ulps and the maximum error is not printed at the end of tests.
The regen-ulps rule is also removed since it does not make sense to
update the libm-test-ulps automatically.
The manual error table is also removed, Paul Zimmermann and others have
been tracking libm precision with a more comprehensive analysis for some
releases; so link to his work instead.
[1] https://sourceware.org/git/?p=glibc.git;a=commit;h=9cc9f8e11e8fb8f54f1e84d9f024917634a78201
Linux 6.13 adds four new syscalls. Update syscall-names.list and
regenerate the arch-syscall.h headers with build-many-glibcs.py
update-syscalls.
Tested with build-many-glibcs.py.
Do not add the pthread_atfork routine again in nptl/Makefile,
instead rely on sysdeps/pthread/Makefile for the integration
(as this is the directory that contains the source file).
In sysdeps/pthread/Makefile, add to static-only-routines.
Reviewed-by: Joseph Myers <josmyers@redhat.com>
