The Sframe V2 has a new errata which introduces the
SFRAME_F_FDE_FUNC_START_PCREL flag. This flag indicates the encoding
of the SFrame FDE function start address field like this:
- if set, sfde_func_start_address field contains the offset in bytes
to the start PC of the associated function from the field itself.
- if unset, sfde_func_start_address field contains the offset in bytes
to the start PC of the associated function from the start of the
SFrame section.
Signed-off-by: Claudiu Zissulescu <claudiu.zissulescu-ianculescu@oracle.com>
Reviewed-by: Sam James <sam@gentoo.org>
And add extra checks to enable for binutils 2.45 and if the architecture
explicitly enables it. When SFrame is disabled, all the related code
is also not enabled for backtrace() and _dl_find_object(), so SFrame
backtracking is not used even if the binary has the SFrame segment.
This patch also adds some other related fixes:
* Fixed an issue with AC_CHECK_PROG_VER, where the READELF_SFRAME
usage prevented specifying a different readelf through READELF
environment variable at configure time.
* Add an extra arch-specific internal definition,
libc_cv_support_sframe, to disable --enable-sframe on architectures
that have binutils but not glibc support (s390x).
* Renamed the tests without the .sframe segment and move the
tst-backtrace1 from pthread to debug.
* Use the built compiler strip to remove the .sframe segment,
instead of the system one (which might not support SFrame).
Checked on x86_64-linux-gnu and aarch64-linux-gnu.
Reviewed-by: Sam James <sam@gentoo.org>
This patch adds the necessary bits to enable stack tracing using
SFrame. In the case the new SFrame stack tracing procedure doesn't
find SFrame related info, the stack tracing falls back on default
Dwarf implementation.
The new SFrame stack tracing procedure is added to debug/backtrace.c
file, the support functions are added in sysdeps folder, namely
sframe.h, read-sframe.c and read-sfame.h.
Signed-off-by: Claudiu Zissulescu <claudiu.zissulescu-ianculescu@oracle.com>
Reviewed-by: DJ Delorie <dj@redhat.com>
The changes in commit a93d9e03a3
("Extend struct r_debug to support multiple namespaces [BZ #15971]")
break the dyninst dynamic instrumentation tool. It brings its
own definition of _r_debug (rather than a declaration).
Furthermore, it turns out it is rather hard to use the proposed
handshake for accessing _r_debug via DT_DEBUG. If applications want
to access _r_debug, they can do so directly if the relevant code has
been built as PIC. To protect against harm from accidental copy
relocations due to linker relaxations, this commit restores copy
relocation support by adjusting both copies if interposition or
copy relocations are in play. Therefore, it is possible to
use a hidden reference in ld.so to access _r_debug.
Only perform the copy relocation initialization if libc has been
loaded. Otherwise, the ld.so search scope can be empty, and the
lookup of the _r_debug symbol mail fail.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
It combines updating r_state with the debugger notification.
The second change to _dl_open introduces an additional debugger
notification for dlmopen, but debuggers are expected to ignore it.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
It replaces the ns_debug member of the namespaces. Previously,
the base namespace had an unused ns_debug member.
This change also fixes a concurrency issue: Now _dl_debug_initialize
only updates r_next of the previous namespace's r_debug after the new
r_debug is initialized, so that only the initialized version is
observed. (Client code accessing _r_debug will benefit from load
dependency tracking in CPUs even without explicit barriers.)
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Use __thread variables directly instead. The macros do not save any
typing. It seems unlikely that a future port will lack __thread
variable support.
Some of the __libc_tsd_* variables are referenced from assembler
files, so keep their names. Previously, <libc-tls.h> included
<tls.h>, which in turn included <errno.h>, so a few direct includes
of <errno.h> are now required.
Reviewed-by: Frédéric Bérat <fberat@redhat.com>
Due to raising the minimum binutils version to version >=2.28,
the used cfi_escape for cfi_val_offset can now be ommitted.
Checked with "objdump -WF" / "objdump -Wf" that the previous
cfi_escape and the new cfi_val_offset are equal.
The BZ 32653 fix (12a497c716) kept the
stack pointer zeroing from make_main_stack_executable on
_dl_make_stack_executable. However, previously the 'stack_endp'
pointed to temporary variable created before the call of
_dl_map_object_from_fd; while now we use the __libc_stack_end
directly.
Since pthread_getattr_np relies on correct __libc_stack_end, if
_dl_make_stack_executable is called (for instance, when
glibc.rtld.execstack=2 is set) __libc_stack_end will be set to zero,
and the call will always fail.
The __libc_stack_end zero was used a mitigation hardening, but since
52a01100ad it is used solely on
pthread_getattr_np code. So there is no point in zeroing anymore.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Sam James <sam@gentoo.org>
From the bug report [1], multiple programs still require to dlopen
shared libraries with either missing PT_GNU_STACK or with the executable
bit set. Although, in some cases, it seems to be a hard-craft assembly
source without the required .note.GNU-stack marking (so the static linker
is forced to set the stack executable if the ABI requires it), other
cases seem that the library uses trampolines [2].
Unfortunately, READ_IMPLIES_EXEC is not an option since on some ABIs
(x86_64), the kernel clears the bit, making it unsupported. To avoid
reinstating the broken code that changes stack permission on dlopen
(0ca8785a28), this patch extends the glibc.rtld.execstack tunable to
allow an option to force an executable stack at the program startup.
The tunable is a security issue because it defeats the PT_GNU_STACK
hardening. It has the slight advantage of making it explicit by the
caller, and, as for other tunables, this is disabled for setuid binaries.
A tunable also allows us to eventually remove it, but from previous
experiences, it would require some time.
Checked on aarch64-linux-gnu, x86_64-linux-gnu, and i686-linux-gnu.
[1] https://sourceware.org/bugzilla/show_bug.cgi?id=32653
[2] https://github.com/conda-forge/ctng-compiler-activation-feedstock/issues/143
Reviewed-by: Sam James <sam@gentoo.org>
C23 adds various <math.h> function families originally defined in TS
18661-4. Add the pown functions, which are like pow but with an
integer exponent. That exponent has type long long int in C23; it was
intmax_t in TS 18661-4, and as with other interfaces changed after
their initial appearance in the TS, I don't think we need to support
the original version of the interface. The test inputs are based on
the subset of test inputs for pow that use integer exponents that fit
in long long.
As the first such template implementation that saves and restores the
rounding mode internally (to avoid possible issues with directed
rounding and intermediate overflows or underflows in the wrong
rounding mode), support also needed to be added for using
SET_RESTORE_ROUND* in such template function implementations. This
required math-type-macros-float128.h to include <fenv_private.h>, so
it can tell whether SET_RESTORE_ROUNDF128 is defined. In turn, the
include order with <fenv_private.h> included before <math_private.h>
broke loongarch builds, showing up that
sysdeps/loongarch/math_private.h is really a fenv_private.h file
(maybe implemented internally before the consistent split of those
headers in 2018?) and needed to be renamed to fenv_private.h to avoid
errors with duplicate macro definitions if <math_private.h> is
included after <fenv_private.h>.
The underlying implementation uses __ieee754_pow functions (called
more than once in some cases, where the exponent does not fit in the
floating type). I expect a custom implementation for a given format,
that only handles integer exponents but handles larger exponents
directly, could be faster and more accurate in some cases.
I encourage searching for worst cases for ulps error for these
implementations (necessarily non-exhaustively, given the size of the
input space).
Tested for x86_64 and x86, and with build-many-glibcs.py.
The 7bb8045ec0 path made the '%n' fortify check ignore EMFILE errors
while trying to open /proc/self/maps, and this added a security
issue where EMFILE can be attacker-controlled thus making it
ineffective for some cases.
The EMFILE failure is reinstated but with a different error
message. Also, to improve the false positive of the hardening for
the cases where no new files can be opened, the
_dl_readonly_area now uses _dl_find_object to check if the
memory area is within a writable ELF segment. The procfs method is
still used as fallback.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Arjun Shankar <arjun@redhat.com>
On both Linux and Hurd the __eloop_threshold() is always a constant
(40 and 32 respectively), so there is no need to always call
__sysconf (_SC_SYMLOOP_MAX) for Linux case (!SYMLOOP_MAX). To avoid
a name clash with gnulib, rename the new file min-eloop-threshold.h.
Checked on x86_64-linux-gnu and with a build for x86_64-gnu.
Reviewed-by: DJ Delorie <dj@redhat.com>
When an executable is invoked directly, we calculate $ORIGIN by calling
readlink on /proc/self/exe, which the Linux kernel resolves to the
target of any symlinks. However, if an executable is run through ld.so,
we cannot use /proc/self/exe and instead use the path given as an
argument. This leads to a different calculation of $ORIGIN, which is
most notable in that it causes ldd to behave differently (e.g., by not
finding a library) from directly running the program.
To make the behavior consistent, take advantage of the fact that the
kernel also resolves /proc/self/fd/ symlinks to the target of any
symlinks in the same manner, so once we have opened the main executable
in order to load it, replace the user-provided path with the result of
calling readlink("/proc/self/fd/N").
(On non-Linux platforms this resolution does not happen and so no
behavior change is needed.)
The __fd_to_filename requires _fitoa_word and _itoa_word, which for
32-bits pulls a lot of definitions from _itoa.c (due _ITOA_NEEDED
being defined). To simplify the build move the required function
to a new file, _fitoa_word.c.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Co-authored-by: Geoffrey Thomas <geofft@ldpreload.com>
Reviewed-by: Geoffrey Thomas <geofft@ldpreload.com>
Tested-by: Geoffrey Thomas <geofft@ldpreload.com>
The current approach tracks math maximum supported errors by explicitly
setting them per function and architecture. On newer implementations or
new compiler versions, the file is updated with newer values if it
shows higher results. The idea is to track the maximum known error, to
update the manual with the obtained values.
The constant libm-test-ulps shows little value, where it is usually a
mechanical change done by the maintainer, for past releases it is
usually ignored whether the ulp change resulted from a compiler
regression, and the math tests already have a maximum ulp error that
triggers a regression.
It was shown by a recent update after the new acosf [1] implementation
that is correctly rounded, where the libm-test-ulps was indeed from a
compiler issue.
This patch removes all arch-specific libm-test-ulps, adds system generic
libm-test-ulps where applicable, and changes its semantics. The generic
files now track specific implementation constraints, like if it is
expected to be correctly rounded, or if the system-specific has
different error expectations.
Now multiple libm-test-ulps can be defined, and system-specific
overrides generic implementation. This is for the case where
arch-specific implementation might show worse precision than generic
implementation, for instance, the cbrtf on i686.
Regressions are only reported if the implementation shows larger errors
than 9 ulps (13 for IBM long double) unless it is overridden by
libm-test-ulps and the maximum error is not printed at the end of tests.
The regen-ulps rule is also removed since it does not make sense to
update the libm-test-ulps automatically.
The manual error table is also removed, Paul Zimmermann and others have
been tracking libm precision with a more comprehensive analysis for some
releases; so link to his work instead.
[1] https://sourceware.org/git/?p=glibc.git;a=commit;h=9cc9f8e11e8fb8f54f1e84d9f024917634a78201
powerpc was the only architecture with arch-specific hooks for
LD_SHOW_AUXV, and with the information moved to ld diagnostics there
is no need to keep the _dl_procinfo hook.
Checked with a build for all affected ABIs.
Reviewed-by: Peter Bergner <bergner@linux.ibm.com>
Remove unused _dl_hwcap_string defines. As a result many dl-procinfo.h headers
can be removed. This also removes target specific _dl_procinfo implementations
which only printed HWCAP strings using dl_hwcap_string.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
It's not necessary to introduce temporaries because the compiler
is able to evaluate l_soname just once in constracts like:
l_soname (l) != NULL && strcmp (l_soname (l), LIBC_SO) != 0
Decorate BSS mappings with [anon: glibc: .bss <file>], for example
[anon: glibc: .bss /lib/libc.so.6]. The string ".bss" is already used
by bionic so use the same, but add the filename as well. If the name
would be longer than what the kernel allows, drop the directory part
of the path.
Refactor glibc.mem.decorate_maps check to a separate function and use
it to avoid assembling a name, which would not be used later.
Signed-off-by: Petr Malat <oss@malat.biz>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Add the logic to append an 'extra TLS' block in the TLS block allocator
with a generic stub implementation. The duplicated code in
'csu/libc-tls.c' and 'elf/dl-tls.c' is to handle both statically linked
applications and the ELF dynamic loader.
Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
On arc, the definition of TLS_DTV_UNALLOCATED now comes from
<dl-dtv.h>.
For x86-64 x32, a separate version is needed because unsigned long int
is 32 bits on this target.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
If some shared library loaded with dlopen/dlmopen requires an executable
stack, either implicitly because of a missing GNU_STACK ELF header
(where the ABI default flags implies in the executable bit) or explicitly
because of the executable bit from GNU_STACK; the loader will try to set
the both the main thread and all thread stacks (from the pthread cache)
as executable.
Besides the issue where any __nptl_change_stack_perm failure does not
undo the previous executable transition (meaning that if the library
fails to load, there can be thread stacks with executable stacks), this
behavior was used on a CVE [1] as a vector for RCE.
This patch changes that if a shared library requires an executable
stack, and the current stack is not executable, dlopen fails. The
change is done only for dynamically loaded modules, if the program
or any dependency requires an executable stack, the loader will still
change the main thread before program execution and any thread created
with default stack configuration.
[1] https://www.qualys.com/2023/07/19/cve-2023-38408/rce-openssh-forwarded-ssh-agent.txt
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Add __attribute_optimization_barrier__ to disable inlining and cloning on a
function. For Clang, expand it to
__attribute__ ((optnone))
Otherwise, expand it to
__attribute__ ((noinline, clone))
Co-Authored-By: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Sam James <sam@gentoo.org>
This avoids immediate GLIBC_PRIVATE ABI issues if the size of
struct link_map or struct auditstate changes.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Unconditionally define it to false for static builds.
This avoids the awkward use of weak_extern for _dl_rtld_map
in checks that cannot be possibly true on static builds.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Add calloc-clear-memory.h to clear memory size up to 36 bytes (72 bytes
on 64-bit targets) for calloc. Use repeated stores with 1 branch, instead
of up to 3 branches. On x86-64, it is faster than memset since calling
memset needs 1 indirect branch, 1 broadcast, and up to 4 branches.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
The CORE-MATH implementation is correctly rounded (for any rounding mode)
and shows better performance to the generic tanf.
The code was adapted to glibc style, to use the definition of
math_config.h, to remove errno handling, and to use a generic
128 bit routine for ABIs that do not support it natively.
Benchtest on x64_64 (Ryzen 9 5900X, gcc 14.2.1), aarch64 (neoverse1,
gcc 13.2.1), and powerpc (POWER10, gcc 13.2.1):
latency master patched improvement
x86_64 82.3961 54.8052 33.49%
x86_64v2 82.3415 54.8052 33.44%
x86_64v3 69.3661 50.4864 27.22%
i686 219.271 45.5396 79.23%
aarch64 29.2127 19.1951 34.29%
power10 19.5060 16.2760 16.56%
reciprocal-throughput master patched improvement
x86_64 28.3976 19.7334 30.51%
x86_64v2 28.4568 19.7334 30.65%
x86_64v3 21.1815 16.1811 23.61%
i686 105.016 15.1426 85.58%
aarch64 18.1573 10.7681 40.70%
power10 8.7207 8.7097 0.13%
Signed-off-by: Alexei Sibidanov <sibid@uvic.ca>
Signed-off-by: Paul Zimmermann <Paul.Zimmermann@inria.fr>
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: DJ Delorie <dj@redhat.com>
Linux 6.11 has getrandom() in vDSO. It operates on a thread-local opaque
state allocated with mmap using flags specified by the vDSO.
Multiple states are allocated at once, as many as fit into a page, and
these are held in an array of available states to be doled out to each
thread upon first use, and recycled when a thread terminates. As these
states run low, more are allocated.
To make this procedure async-signal-safe, a simple guard is used in the
LSB of the opaque state address, falling back to the syscall if there's
reentrancy contention.
Also, _Fork() is handled by blocking signals on opaque state allocation
(so _Fork() always sees a consistent state even if it interrupts a
getrandom() call) and by iterating over the thread stack cache on
reclaim_stack. Each opaque state will be in the free states list
(grnd_alloc.states) or allocated to a running thread.
The cancellation is handled by always using GRND_NONBLOCK flags while
calling the vDSO, and falling back to the cancellable syscall if the
kernel returns EAGAIN (would block). Since getrandom is not defined by
POSIX and cancellation is supported as an extension, the cancellation is
handled as 'may occur' instead of 'shall occur' [1], meaning that if
vDSO does not block (the expected behavior) getrandom will not act as a
cancellation entrypoint. It avoids a pthread_testcancel call on the fast
path (different than 'shall occur' functions, like sem_wait()).
It is currently enabled for x86_64, which is available in Linux 6.11,
and aarch64, powerpc32, powerpc64, loongarch64, and s390x, which are
available in Linux 6.12.
Link: https://pubs.opengroup.org/onlinepubs/9799919799/nframe.html [1]
Co-developed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Tested-by: Jason A. Donenfeld <Jason@zx2c4.com> # x86_64
Tested-by: Adhemerval Zanella <adhemerval.zanella@linaro.org> # x86_64, aarch64
Tested-by: Xi Ruoyao <xry111@xry111.site> # x86_64, aarch64, loongarch64
Tested-by: Stefan Liebler <stli@linux.ibm.com> # s390x
The recursive lock used on abort does not synchronize with a new process
creation (either by fork-like interfaces or posix_spawn ones), nor it
is reinitialized after fork().
Also, the SIGABRT unblock before raise() shows another race condition,
where a fork or posix_spawn() call by another thread, just after the
recursive lock release and before the SIGABRT signal, might create
programs with a non-expected signal mask. With the default option
(without POSIX_SPAWN_SETSIGDEF), the process can see SIG_DFL for
SIGABRT, where it should be SIG_IGN.
To fix the AS-safe, raise() does not change the process signal mask,
and an AS-safe lock is used if a SIGABRT is installed or the process
is blocked or ignored. With the signal mask change removal,
there is no need to use a recursive loc. The lock is also taken on
both _Fork() and posix_spawn(), to avoid the spawn process to see the
abort handler as SIG_DFL.
A read-write lock is used to avoid serialize _Fork and posix_spawn
execution. Both sigaction (SIGABRT) and abort() requires to lock
as writer (since both change the disposition).
The fallback is also simplified: there is no need to use a loop of
ABORT_INSTRUCTION after _exit() (if the syscall does not terminate the
process, the system is broken).
The proposed fix changes how setjmp works on a SIGABRT handler, where
glibc does not save the signal mask. So usage like the below will now
always abort.
static volatile int chk_fail_ok;
static jmp_buf chk_fail_buf;
static void
handler (int sig)
{
if (chk_fail_ok)
{
chk_fail_ok = 0;
longjmp (chk_fail_buf, 1);
}
else
_exit (127);
}
[...]
signal (SIGABRT, handler);
[....]
chk_fail_ok = 1;
if (! setjmp (chk_fail_buf))
{
// Something that can calls abort, like a failed fortify function.
chk_fail_ok = 0;
printf ("FAIL\n");
}
Such cases will need to use sigsetjmp instead.
The _dl_start_profile calls sigaction through _profil, and to avoid
pulling abort() on loader the call is replaced with __libc_sigaction.
Checked on x86_64-linux-gnu and aarch64-linux-gnu.
Reviewed-by: DJ Delorie <dj@redhat.com>
The current racy approach is to enable asynchronous cancellation
before making the syscall and restore the previous cancellation
type once the syscall returns, and check if cancellation has happen
during the cancellation entrypoint.
As described in BZ#12683, this approach shows 2 problems:
1. Cancellation can act after the syscall has returned from the
kernel, but before userspace saves the return value. It might
result in a resource leak if the syscall allocated a resource or a
side effect (partial read/write), and there is no way to program
handle it with cancellation handlers.
2. If a signal is handled while the thread is blocked at a cancellable
syscall, the entire signal handler runs with asynchronous
cancellation enabled. This can lead to issues if the signal
handler call functions which are async-signal-safe but not
async-cancel-safe.
For the cancellation to work correctly, there are 5 points at which the
cancellation signal could arrive:
[ ... )[ ... )[ syscall ]( ...
1 2 3 4 5
1. Before initial testcancel, e.g. [*... testcancel)
2. Between testcancel and syscall start, e.g. [testcancel...syscall start)
3. While syscall is blocked and no side effects have yet taken
place, e.g. [ syscall ]
4. Same as 3 but with side-effects having occurred (e.g. a partial
read or write).
5. After syscall end e.g. (syscall end...*]
And libc wants to act on cancellation in cases 1, 2, and 3 but not
in cases 4 or 5. For the 4 and 5 cases, the cancellation will eventually
happen in the next cancellable entrypoint without any further external
event.
The proposed solution for each case is:
1. Do a conditional branch based on whether the thread has received
a cancellation request;
2. It can be caught by the signal handler determining that the saved
program counter (from the ucontext_t) is in some address range
beginning just before the "testcancel" and ending with the
syscall instruction.
3. SIGCANCEL can be caught by the signal handler and determine that
the saved program counter (from the ucontext_t) is in the address
range beginning just before "testcancel" and ending with the first
uninterruptable (via a signal) syscall instruction that enters the
kernel.
4. In this case, except for certain syscalls that ALWAYS fail with
EINTR even for non-interrupting signals, the kernel will reset
the program counter to point at the syscall instruction during
signal handling, so that the syscall is restarted when the signal
handler returns. So, from the signal handler's standpoint, this
looks the same as case 2, and thus it's taken care of.
5. For syscalls with side-effects, the kernel cannot restart the
syscall; when it's interrupted by a signal, the kernel must cause
the syscall to return with whatever partial result is obtained
(e.g. partial read or write).
6. The saved program counter points just after the syscall
instruction, so the signal handler won't act on cancellation.
This is similar to 4. since the program counter is past the syscall
instruction.
So The proposed fixes are:
1. Remove the enable_asynccancel/disable_asynccancel function usage in
cancellable syscall definition and instead make them call a common
symbol that will check if cancellation is enabled (__syscall_cancel
at nptl/cancellation.c), call the arch-specific cancellable
entry-point (__syscall_cancel_arch), and cancel the thread when
required.
2. Provide an arch-specific generic system call wrapper function
that contains global markers. These markers will be used in
SIGCANCEL signal handler to check if the interruption has been
called in a valid syscall and if the syscalls has side-effects.
A reference implementation sysdeps/unix/sysv/linux/syscall_cancel.c
is provided. However, the markers may not be set on correct
expected places depending on how INTERNAL_SYSCALL_NCS is
implemented by the architecture. It is expected that all
architectures add an arch-specific implementation.
3. Rewrite SIGCANCEL asynchronous handler to check for both canceling
type and if current IP from signal handler falls between the global
markers and act accordingly.
4. Adjust libc code to replace LIBC_CANCEL_ASYNC/LIBC_CANCEL_RESET to
use the appropriate cancelable syscalls.
5. Adjust 'lowlevellock-futex.h' arch-specific implementations to
provide cancelable futex calls.
Some architectures require specific support on syscall handling:
* On i386 the syscall cancel bridge needs to use the old int80
instruction because the optimized vDSO symbol the resulting PC value
for an interrupted syscall points to an address outside the expected
markers in __syscall_cancel_arch. It has been discussed in LKML [1]
on how kernel could help userland to accomplish it, but afaik
discussion has stalled.
Also, sysenter should not be used directly by libc since its calling
convention is set by the kernel depending of the underlying x86 chip
(check kernel commit 30bfa7b3488bfb1bb75c9f50a5fcac1832970c60).
* mips o32 is the only kABI that requires 7 argument syscall, and to
avoid add a requirement on all architectures to support it, mips
support is added with extra internal defines.
Checked on aarch64-linux-gnu, arm-linux-gnueabihf, powerpc-linux-gnu,
powerpc64-linux-gnu, powerpc64le-linux-gnu, i686-linux-gnu, and
x86_64-linux-gnu.
[1] https://lkml.org/lkml/2016/3/8/1105
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
With ia64 removal, the function descriptor supports is only used
by HPPA and new architectures do not seem leaning towards this
design.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
The old code used l_init_called as an indicator for whether TLS
initialization was complete. However, it is possible that
TLS for an object is initialized, written to, and then dlopen
for this object is called again, and l_init_called is not true at
this point. Previously, this resulted in TLS being initialized
twice, discarding any interim writes (technically introducing a
use-after-free bug even).
This commit introduces an explicit per-object flag, l_tls_in_slotinfo.
It indicates whether _dl_add_to_slotinfo has been called for this
object. This flag is used to avoid double-initialization of TLS.
In update_tls_slotinfo, the first_static_tls micro-optimization
is removed because preserving the initalization flag for subsequent
use by the second loop for static TLS is a bit complicated, and
another per-object flag does not seem to be worth it. Furthermore,
the l_init_called flag is dropped from the second loop (for static
TLS initialization) because l_need_tls_init on its own prevents
double-initialization.
The remaining l_init_called usage in resize_scopes and update_scopes
is just an optimization due to the use of scope_has_map, so it is
not changed in this commit.
The isupper check ensures that libc.so.6 is TLS is not reverted.
Such a revert happens if l_need_tls_init is not cleared in
_dl_allocate_tls_init for the main_thread case, now that
l_init_called is not checked anymore in update_tls_slotinfo
in elf/dl-open.c.
Reported-by: Jonathon Anderson <janderson@rice.edu>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Add tests for MREMAP_MAYMOVE and MREMAP_FIXED. On Linux, also test
MREMAP_DONTUNMAP.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
It turns out that quite a few applications use bundled mallocs that
have been built to use global-dynamic TLS (instead of the recommended
initial-exec TLS). The previous workaround from
commit afe42e935b ("elf: Avoid some
free (NULL) calls in _dl_update_slotinfo") does not fix all
encountered cases unfortunatelly.
This change avoids the TLS generation update for recursive use
of TLS from a malloc that was called during a TLS update. This
is possible because an interposed malloc has a fixed module ID and
TLS slot. (It cannot be unloaded.) If an initially-loaded module ID
is encountered in __tls_get_addr and the dynamic linker is already
in the middle of a TLS update, use the outdated DTV, thus avoiding
another call into malloc. It's still necessary to update the
DTV to the most recent generation, to get out of the slow path,
which is why the check for recursion is needed.
The bookkeeping is done using a global counter instead of per-thread
flag because TLS access in the dynamic linker is tricky.
All this will go away once the dynamic linker stops using malloc
for TLS, likely as part of a change that pre-allocates all TLS
during pthread_create/dlopen.
Fixes commit d2123d6827 ("elf: Fix slow
tls access after dlopen [BZ #19924]").
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Remove the definitions of HWCAP_IMPORTANT after removal of
LD_HWCAP_MASK / tunable glibc.cpu.hwcap_mask. There HWCAP_IMPORTANT
was used as default value.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Remove the environment variable LD_HWCAP_MASK and the tunable
glibc.cpu.hwcap_mask as those are not used anymore in common-code
after removal in elf/dl-cache.c:search_cache().
The only remaining user is sparc32 where it is used in
elf_machine_matches_host(). If sparc32 does not need it anymore,
we can get rid of it at all. Otherwise we could also move
LD_HWCAP_MASK / tunable glibc.cpu.hwcap_mask to be sparc32 specific.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Remove the definitions of _DL_HWCAP_PLATFORM as those are not used
anymore after removal in elf/dl-cache.c:search_cache().
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Despite of powerpc where the returned integer is stored in tcb,
and the diagnostics output, there is no user anymore.
Thus this patch removes the diagnostics output and
_dl_string_platform for all other platforms.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The default <utmp-size.h> is for ports with a 64-bit time_t.
Ports with a 32-bit time_t or with __WORDSIZE_TIME64_COMPAT32=1
need to override it.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The a4ed0471d7 removed the generic version which is included by
features.h and used by Hurd.
Checked by building i686-gnu and x86_64-gnu with build-many-glibc.py.
