Fix misspellings in sysdeps/unix -- BZ 25337

Applying this commit results in bit-identical rebuild of
libc.so.6 math/libm.so.6 elf/ld-linux-x86-64.so.2 mathvec/libmvec.so.1

Reviewed-by: Florian Weimer <fweimer@redhat.com>

sysdeps/unix/sysv/linux/aarch64/ucontext-internal.h

@@ -20,7 +20,7 @@
 
 #define SP_ALIGN_MASK	   ~15
 
-/* Size of an X regiser in bytes. */
+/* Size of an X register in bytes. */
 #define SZREG                8
 
 /* Size of a V register in bytes. */

sysdeps/unix/sysv/linux/alpha/getcontext.S

@@ -44,7 +44,7 @@ weak_alias (__getcontext, getcontext)
 
 
 /* An internal routine used by getcontext and setcontext.
-   The incomming return address register is $0.  */
+   The incoming return address register is $0.  */
 
 	.align	4
 	.globl	__getcontext_x

sysdeps/unix/sysv/linux/alpha/ioperm.c

@@ -95,7 +95,7 @@ asm(".arch ev56");
 #define TSUNAMI_DENSE_MEM	(0x80000000000UL)
 
 /* Polaris has SPARSE space, but we prefer to use only DENSE
-   because of some idiosyncracies in actually using SPARSE.  */
+   because of some idiosyncrasies in actually using SPARSE.  */
 #define POLARIS_IO_BASE		(0xf9fc000000UL)
 #define POLARIS_DENSE_MEM	(0xf900000000UL)
 

sysdeps/unix/sysv/linux/arc/bits/procfs.h

@@ -31,5 +31,5 @@
 typedef unsigned long int elf_greg_t;
 typedef unsigned long int elf_gregset_t[ELF_NGREG];
 
-/* There's no seperate floating point reg file in ARCv2.  */
+/* There's no separate floating point reg file in ARCv2.  */
 typedef struct { } elf_fpregset_t;

sysdeps/unix/sysv/linux/arc/clone.S

@@ -43,7 +43,7 @@ ENTRY (__clone)
 	bz	L (__sys_err)
 
 	/* save some of the orig args
-	   r0 containg @fn will be clobbered AFTER syscall (with ret val)
+	   r0 containing @fn will be clobbered AFTER syscall (with ret val)
 	   rest are clobbered BEFORE syscall due to different arg ordering.  */
 	mov	r10, r0		/* @fn.  */
 	mov	r11, r3		/* @args.  */

sysdeps/unix/sysv/linux/arc/sysdep.h

@@ -182,11 +182,11 @@ hidden_proto (__syscall_error)
   __ret = (long int) (arg1);					\
   LOAD_ARGS_0 (nm, arg1)
 
-/* Note that the use of _tmpX might look superflous, however it is needed
+/* Note that the use of _tmpX might look superfluous, however it is needed
    to ensure that register variables are not clobbered if arg happens to be
    a function call itself. e.g. sched_setaffinity() calling getpid() for arg2
    Also this specific order of recursive calling is important to segregate
-   the tmp args evaluation (function call case described above) and assigment
+   the tmp args evaluation (function call case described above) and assignment
    of register variables.  */
 
 # define LOAD_ARGS_2(nm, arg1, arg2)			\

sysdeps/unix/sysv/linux/arch-fork.h

@@ -28,7 +28,7 @@
    to store the child thread ID at its locationm, to erase it in child memory
    when the child exits, and do a wakeup on the futex at that address.
 
-   The architecture with non-default kernel abi semantic should correctlly
+   The architecture with non-default kernel abi semantic should correctly
    override it with one of the supported calling convention (check generic
    kernel-features.h for the clone abi variants).  */
 static inline pid_t

sysdeps/unix/sysv/linux/bits/local_lim.h

@@ -73,7 +73,7 @@
 /* We have no predefined limit on the number of threads.  */
 #undef PTHREAD_THREADS_MAX
 
-/* Maximum amount by which a process can descrease its asynchronous I/O
+/* Maximum amount by which a process can decrease its asynchronous I/O
    priority level.  */
 #define AIO_PRIO_DELTA_MAX	20
 

sysdeps/unix/sysv/linux/bits/mman-linux.h

@@ -78,7 +78,7 @@
 # define MADV_UNMERGEABLE 13	/* KSM may not merge identical pages.  */
 # define MADV_HUGEPAGE	  14	/* Worth backing with hugepages.  */
 # define MADV_NOHUGEPAGE  15	/* Not worth backing with hugepages.  */
-# define MADV_DONTDUMP	  16    /* Explicity exclude from the core dump,
+# define MADV_DONTDUMP	  16    /* Explicitly exclude from the core dump,
                                    overrides the coredump filter bits.  */
 # define MADV_DODUMP	  17	/* Clear the MADV_DONTDUMP flag.  */
 # define MADV_WIPEONFORK  18	/* Zero memory on fork, child only.  */

sysdeps/unix/sysv/linux/bits/posix_opt.h

@@ -84,7 +84,7 @@
 /* We support user-defined stacks.  */
 #define _POSIX_THREAD_ATTR_STACKADDR	200809L
 
-/* We support priority inheritence.  */
+/* We support priority inheritance.  */
 #define _POSIX_THREAD_PRIO_INHERIT	200809L
 
 /* We support priority protection, though only for non-robust
@@ -92,7 +92,7 @@
 #define _POSIX_THREAD_PRIO_PROTECT	200809L
 
 #ifdef __USE_XOPEN2K8
-/* We support priority inheritence for robust mutexes.  */
+/* We support priority inheritance for robust mutexes.  */
 # define _POSIX_THREAD_ROBUST_PRIO_INHERIT	200809L
 
 /* We do not support priority protection for robust mutexes.  */

sysdeps/unix/sysv/linux/bits/siginfo-consts.h

@@ -143,7 +143,7 @@ enum
 {
   BUS_ADRALN = 1,		/* Invalid address alignment.  */
 #  define BUS_ADRALN	BUS_ADRALN
-  BUS_ADRERR,			/* Non-existant physical address.  */
+  BUS_ADRERR,			/* Non-existent physical address.  */
 #  define BUS_ADRERR	BUS_ADRERR
   BUS_OBJERR,			/* Object specific hardware error.  */
 #  define BUS_OBJERR	BUS_OBJERR

sysdeps/unix/sysv/linux/bits/termios-tcflow.h

@@ -1,4 +1,4 @@
-/* termios tcflag symbolic contants definitions.  Linux/generic version.
+/* termios tcflag symbolic constant definitions.  Linux/generic version.
    Copyright (C) 2019-2023 Free Software Foundation, Inc.
    This file is part of the GNU C Library.
 

sysdeps/unix/sysv/linux/dl-diagnostics-kernel.c

@@ -36,7 +36,7 @@ print_auxv (void)
           || av->a_type == AT_PLATFORM
           || av->a_type == AT_BASE_PLATFORM)
         /* The address of the strings is not useful at all, so print
-           the strings themselvs.  */
+           the strings themselves.  */
         _dl_diagnostics_print_string ((const char *) av->a_un.a_val);
       else
         _dl_printf ("0x%lx", (unsigned long int) av->a_un.a_val);

sysdeps/unix/sysv/linux/dl-vdso-setup.c

@@ -20,7 +20,7 @@
    and shared (rtld) modes:
 
    1. PROCINFO_DECL is defined, meaning we are only interested in
-      declarations.  For static it requires use the extern keywork along with
+      declarations.  For static it requires use the extern keyword along with
       the attribute_relro while for shared it will be embedded in the
       rtld_global_ro.
 

sysdeps/unix/sysv/linux/glibcsyscalls.py

@@ -32,7 +32,7 @@ def extract_system_call_name(macro):
     else:
         raise ValueError('invalid system call name: {!r}'.format(macro))
 
-# Matches macros for systme call names.
+# Matches macros for system call names.
 RE_SYSCALL = re.compile('__NR_.*')
 
 # Some __NR_ constants are not real
@@ -54,7 +54,7 @@ def kernel_constants(cc):
     return {extract_system_call_name(name) : int(value)
             for name, value in glibcextract.compute_macro_consts(
                     '#include <asm/unistd.h>\n'
-                    # Regularlize the kernel definitions if necessary.
+                    # Regularize the kernel definitions if necessary.
                     '#include <fixup-asm-unistd.h>',
                     cc, macro_re=RE_SYSCALL, exclude_re=RE_PSEUDO_SYSCALL)
             .items()}

sysdeps/unix/sysv/linux/hppa/clone.S

@@ -51,7 +51,7 @@
 
    Return:
 
-	On success the thread ID of the child process is returend in
+	On success the thread ID of the child process is returned in
 	the callers context.
 	On error return -1, and set errno to the value returned by
 	the syscall.

sysdeps/unix/sysv/linux/hppa/sysdep.h

@@ -53,7 +53,7 @@
 #define LOAD_PIC(LREG) \
 	copy LREG , %r19
 /* Inline assembly defines */
-#define TREG_ASM "%r4" /* Cant clobber r3, it holds framemarker */
+#define TREG_ASM "%r4" /* Can't clobber r3, it holds framemarker */
 #define SAVE_ASM_PIC	"       copy %%r19, %" TREG_ASM "\n"
 #define LOAD_ASM_PIC	"       copy %" TREG_ASM ", %%r19\n"
 #define CLOB_TREG	TREG_ASM ,
@@ -134,7 +134,7 @@
 	/* SAVE_RP says we do */			ASM_LINE_SEP	\
 	stw %rp, -20(%sr0,%sp)				ASM_LINE_SEP	\
 	.cfi_offset 2, -20				ASM_LINE_SEP	\
-	/*FIXME: Call mcount? (carefull with stack!) */
+	/*FIXME: Call mcount? (careful with stack!) */
 
 /* Some syscall wrappers do not call other functions, and
    hence are classified as leaf, so add NO_CALLS for gdb */
@@ -151,7 +151,7 @@
 	/* SAVE_RP says we do */			ASM_LINE_SEP	\
 	stw %rp, -20(%sr0,%sp)				ASM_LINE_SEP	\
 	.cfi_offset 2, -20				ASM_LINE_SEP	\
-	/*FIXME: Call mcount? (carefull with stack!) */
+	/*FIXME: Call mcount? (careful with stack!) */
 
 #undef	END
 #define END(name)							\

sysdeps/unix/sysv/linux/i386/brk.c

@@ -17,7 +17,7 @@
    <https://www.gnu.org/licenses/>.  */
 
 #if BUILD_PIE_DEFAULT
-/* Can't use "call *%gs:SYSINFO_OFFSET" during statup in static PIE.  */
+/* Can't use "call *%gs:SYSINFO_OFFSET" during startup in static PIE.  */
 # define I386_USE_SYSENTER 0
 #endif
 

sysdeps/unix/sysv/linux/i386/sysdep.h

@@ -61,7 +61,7 @@
    might return a large offset.  Therefore we must not anymore test
    for < 0, but test for a real error by making sure the value in %eax
    is a real error number.  Linus said he will make sure the no syscall
-   returns a value in -1 .. -4095 as a valid result so we can savely
+   returns a value in -1 .. -4095 as a valid result so we can safely
    test with -4095.  */
 
 /* We don't want the label for the error handle to be global when we define

sysdeps/unix/sysv/linux/ia64/clone2.S

@@ -86,6 +86,6 @@ libc_hidden_def (__clone2)
 
 /* For now we leave __clone undefined.  This is unlikely to be a	*/
 /* problem, since at least the i386 __clone in glibc always failed	*/
-/* with a 0 sp (eventhough the kernel explicitly handled it).		*/
+/* with a 0 sp (even though the kernel explicitly handled it).		*/
 /* Thus all such calls needed to pass an explicit sp, and as a result,	*/
 /* would be unlikely to work on ia64.					*/

sysdeps/unix/sysv/linux/ia64/sys/rse.h

@@ -48,7 +48,7 @@ ia64_rse_rnat_addr (unsigned long *slot_addr)
 	return (unsigned long *) ((unsigned long) slot_addr | (0x3f << 3));
 }
 
-/* Calcuate the number of registers in the dirty partition starting at
+/* Calculate the number of registers in the dirty partition starting at
    BSPSTORE with a size of DIRTY bytes.  This isn't simply DIRTY
    divided by eight because the 64th slot is used to store ar.rnat.  */
 

sysdeps/unix/sysv/linux/ia64/sysdep.h

@@ -86,7 +86,7 @@
    a large offset.  Therefore we must not anymore test for < 0, but test
    for a real error by making sure the value in %d0 is a real error
    number.  Linus said he will make sure the no syscall returns a value
-   in -1 .. -4095 as a valid result so we can savely test with -4095.  */
+   in -1 .. -4095 as a valid result so we can safely test with -4095.  */
 
 /* We don't want the label for the error handler to be visible in the symbol
    table when we define it here.  */

sysdeps/unix/sysv/linux/kernel-posix-timers.h

@@ -68,7 +68,7 @@ struct timer
 
 
 /* For !SIGEV_THREAD, the resulting 'timer_t' is the returned kernel timer
-   identifer (kernel_timer_t), while for SIGEV_THREAD it uses the fact malloc
+   identifier (kernel_timer_t), while for SIGEV_THREAD it uses the fact malloc
    returns at least _Alignof (max_align_t) pointers plus that valid
    kernel_timer_t are always positive to set the MSB bit of the returned
    'timer_t' to indicate the timer handles a SIGEV_THREAD.  */

sysdeps/unix/sysv/linux/loongarch/atomic-machine.h

@@ -26,7 +26,7 @@
 #define ATOMIC_EXCHANGE_USES_CAS 0
 
 /* Compare and exchange.
-   For all "bool" routines, we return FALSE if exchange succesful.  */
+   For all "bool" routines, we return FALSE if exchange successful.  */
 
 #define __arch_compare_and_exchange_bool_8_int(mem, newval, oldval, model) \
   ({ \

sysdeps/unix/sysv/linux/loongarch/sysdep.h

@@ -83,7 +83,7 @@
 #undef ret_NOERRNO
 #define ret_NOERRNO ret
 
-/* Perfroms a system call, returning the error code.  */
+/* Performs a system call, returning the error code.  */
 #undef PSEUDO_ERRVAL
 #define PSEUDO_ERRVAL(name, syscall_name, args) \
   PSEUDO_NOERRNO (name, syscall_name, args); \

sysdeps/unix/sysv/linux/m68k/sysdep.h

@@ -38,7 +38,7 @@
    a large offset.  Therefore we must not anymore test for < 0, but test
    for a real error by making sure the value in %d0 is a real error
    number.  Linus said he will make sure the no syscall returns a value
-   in -1 .. -4095 as a valid result so we can savely test with -4095.  */
+   in -1 .. -4095 as a valid result so we can safely test with -4095.  */
 
 /* We don't want the label for the error handler to be visible in the symbol
    table when we define it here.  */

sysdeps/unix/sysv/linux/microblaze/sysdep.h

@@ -43,7 +43,7 @@
 #ifdef __ASSEMBLER__
 
 /* In microblaze ABI function call arguments are passed in registers
-   r5...r10. The return value is stored in r3 (or r3:r4 regiters pair).
+   r5...r10. The return value is stored in r3 (or r3:r4 register pair).
    Linux syscall uses the same convention with the addition that the
    syscall number is passed in r12. To enter the kernel "brki r14,8"
    instruction is used.
@@ -58,7 +58,7 @@
    a large offset.  Therefore we must not anymore test for < 0, but test
    for a real error by making sure the value in %d0 is a real error
    number.  Linus said he will make sure the no syscall returns a value
-   in -1 .. -4095 as a valid result so we can savely test with -4095.  */
+   in -1 .. -4095 as a valid result so we can safely test with -4095.  */
 
 /* We don't want the label for the error handler to be visible in the symbol
    table when we define it here.  */

sysdeps/unix/sysv/linux/mips/mips32/bug-getcontext-mips-gp.c

@@ -1,4 +1,4 @@
-/* Tests register values retreived by getcontext() for mips o32.
+/* Tests register values retrieved by getcontext() for mips o32.
    Copyright (C) 2017-2023 Free Software Foundation, Inc.
    This file is part of the GNU C Library.
 

sysdeps/unix/sysv/linux/mq_notify.c

@@ -32,9 +32,9 @@
 
 /* Defined in the kernel headers: */
 #define NOTIFY_COOKIE_LEN	32	/* Length of the cookie used.  */
-#define NOTIFY_WOKENUP		1	/* Code for notifcation.  */
+#define NOTIFY_WOKENUP		1	/* Code for notification.  */
 #define NOTIFY_REMOVED		2	/* Code for closed message queue
-					   of de-notifcation.  */
+					   of de-notification.  */
 
 
 /* Data structure for the queued notification requests.  */
@@ -61,7 +61,7 @@ static int netlink_socket = -1;
 
 
 /* Barrier used to make sure data passed to the new thread is not
-   resused by the parent.  */
+   reused by the parent.  */
 static pthread_barrier_t notify_barrier;
 
 

sysdeps/unix/sysv/linux/net/if_shaper.h

@@ -27,7 +27,7 @@ __BEGIN_DECLS
 
 #define SHAPER_QLEN	10
 /*
- *	This is a bit speed dependant (read it shouldnt be a constant!)
+ *	This is a bit speed dependent (read it shouldn't be a constant!)
  *
  *	5 is about right for 28.8 upwards. Below that double for every
  *	halving of speed or so. - ie about 20 for 9600 baud.

sysdeps/unix/sysv/linux/netax25/ax25.h

@@ -62,7 +62,7 @@
 #define AX25_DIGI_INBAND	0x01	/* Allow digipeating within port */
 #define AX25_DIGI_XBAND		0x02	/* Allow digipeating across ports */
 
-/* Maximim number of digipeaters: */
+/* Maximum number of digipeaters: */
 #define AX25_MAX_DIGIS 8
 
 
@@ -80,7 +80,7 @@ struct sockaddr_ax25
   };
 
 /*
- * The sockaddr struct with the digipeater adresses:
+ * The sockaddr struct with the digipeater addresses:
  */
 struct full_sockaddr_ax25
   {

sysdeps/unix/sysv/linux/netlink_assert_response.c

@@ -83,7 +83,7 @@ __netlink_assert_response (int fd, ssize_t result)
           __libc_fatal (message);
         }
       else
-        /* Restore orignal errno value.  */
+        /* Restore original errno value.  */
         __set_errno (error_code);
     }
   else if (result < sizeof (struct nlmsghdr))

sysdeps/unix/sysv/linux/nios2/setcontext.S

@@ -93,7 +93,7 @@ weak_alias (__setcontext, setcontext)
 
 	   If this NOP word does not exist, FDE lookup just repeatedly finds
 	   __setcontext's FDE in an infinite loop, due to the convention of
-	   using 'address - 1' for FDE lookup. Modifiying/deleting the below
+	   using 'address - 1' for FDE lookup. Modifying/deleting the below
 	   __startcontext's FDE has no help on this.  */
 	nop
 

sysdeps/unix/sysv/linux/nscd_setup_thread.c

@@ -1,4 +1,4 @@
-/* Setup of nscd worker threads.  Linux verison.
+/* Setup of nscd worker threads.  Linux version.
    Copyright (C) 2004-2023 Free Software Foundation, Inc.
    This file is part of the GNU C Library.
 

sysdeps/unix/sysv/linux/or1k/setcontext.S

@@ -80,7 +80,7 @@ weak_alias (__setcontext, setcontext)
 	   makecontext we have set r9 to the start of &__startcontext.
 
 	   If this NOP did not exist the unwinder would repeatedly find
-	   __setcontext's FDE in an infinite loop.  Modifiying/deleting the below
+	   __setcontext's FDE in an infinite loop.  Modifying/deleting the below
 	   __startcontext's FDE has no help on this.  */
 	l.nop
 

sysdeps/unix/sysv/linux/pathconf.c

@@ -139,7 +139,7 @@ __statfs_link_max (int result, const struct statfs *fsbuf, const char *file,
 	/* Not possible, return the default value.  */
 	return LINUX_LINK_MAX;
 
-      /* Some error occured.  */
+      /* Some error occurred.  */
       return -1;
     }
 
@@ -202,7 +202,7 @@ __statfs_filesize_max (int result, const struct statfs *fsbuf)
 	/* Not possible, return the default value.  */
 	return 32;
 
-      /* Some error occured.  */
+      /* Some error occurred.  */
       return -1;
     }
 
@@ -251,7 +251,7 @@ __statfs_symlinks (int result, const struct statfs *fsbuf)
 	/* Not possible, return the default value.  */
 	return 1;
 
-      /* Some error occured.  */
+      /* Some error occurred.  */
       return -1;
     }
 
@@ -286,7 +286,7 @@ __statfs_chown_restricted (int result, const struct statfs *fsbuf)
 	/* Not possible, return the default value.  */
 	return 1;
 
-      /* Some error occured.  */
+      /* Some error occurred.  */
       return -1;
     }
 

sysdeps/unix/sysv/linux/personality.c

@@ -28,7 +28,7 @@ __personality (unsigned long persona)
      task_struct->pesonality is "unsigned int".
      Starting with kernel commit v2.6.35-rc1-372-g485d527, the personality
      syscall accepts "unsigned int" instead of "long unsigned int".
-     Inbetween, a personality argument that does not fit into "unsigned int"
+     In between, a personality argument that does not fit into "unsigned int"
      would result to system call returning -EINVAL.
      We explicitly truncate the personality argument to "unsigned int"
      to eliminate the uncertainty.  */

sysdeps/unix/sysv/linux/posix_fadvise.c

@@ -29,7 +29,7 @@
 
    Second option will be used by arm which define __NR_arm_fadvise64_64
    (redefined to __NR_fadvise64_64 in kernel-features.h) that behaves as
-   __NR_fadvise64_64 (without the aligment argument required for the ABI).
+   __NR_fadvise64_64 (without the alignment argument required for the ABI).
 
    Third option will be used by mips o32.  Mips will use a 7 argument
    syscall with __NR_fadvise64.

sysdeps/unix/sysv/linux/powerpc/elision-conf.c

@@ -53,7 +53,7 @@ static inline void
 __always_inline
 do_set_elision_enable (int32_t elision_enable)
 {
-  /* Enable elision if it's avaliable in hardware. It's not necessary to check
+  /* Enable elision if it's available in hardware. It's not necessary to check
      if __libc_enable_secure isn't enabled since elision_enable will be set
      according to the default, which is disabled.  */
   if (elision_enable == 1)
@@ -126,7 +126,7 @@ __lll_elision_init (void)
      syscalls which makes the glibc workaround superflours.  Worse, glibc
      transaction abortions leads to a performance issues on recent kernels.
 
-     So Lock Elision is just enabled when it has been explict set (either
+     So Lock Elision is just enabled when it has been explicitly set (either
      by tunables of by a configure switch) and if kernel aborts HTM
      transactions on syscalls (PPC_FEATURE2_HTM_NOSC)  */
 

sysdeps/unix/sysv/linux/powerpc/get_timebase_freq.c

@@ -57,7 +57,7 @@ get_timebase_freq_fallback (void)
          the last 512 bytes of cpuinfo, so two 512 byte half_bufs
          will be sufficient to contain the timebase and will
          handle the case where the timebase spans the half_buf
-         boundry.  */
+         boundary.  */
       const ssize_t half_buf = sizeof (buf) / 2;
       while (n >= half_buf)
 	{

sysdeps/unix/sysv/linux/riscv/atomic-machine.h

@@ -28,7 +28,7 @@
 # define ATOMIC_EXCHANGE_USES_CAS 0
 
 /* Compare and exchange.
-   For all "bool" routines, we return FALSE if exchange succesful.  */
+   For all "bool" routines, we return FALSE if exchange successful.  */
 
 # define __arch_compare_and_exchange_bool_8_int(mem, newval, oldval, model) \
   ({									\

sysdeps/unix/sysv/linux/riscv/sysdep.h

@@ -121,7 +121,7 @@
 # undef ret_NOERRNO
 # define ret_NOERRNO ret
 
-/* Perfroms a system call, returning the error code.  */
+/* Performs a system call, returning the error code.  */
 # undef PSEUDO_ERRVAL
 # define PSEUDO_ERRVAL(name, syscall_name, args) 	\
   PSEUDO_NOERRNO (name, syscall_name, args)		\

sysdeps/unix/sysv/linux/s390/elision-conf.c

@@ -53,7 +53,7 @@ static inline void
 __always_inline
 do_set_elision_enable (int32_t elision_enable)
 {
-  /* Enable elision if it's avaliable in hardware. It's not necessary to check
+  /* Enable elision if it's available in hardware. It's not necessary to check
      if __libc_enable_secure isn't enabled since elision_enable will be set
      according to the default, which is disabled.  */
   if (elision_enable == 1)

sysdeps/unix/sysv/linux/s390/htm.h

@@ -121,7 +121,7 @@
 			      pointer access) are filtered and the	\
 			      transaction will abort.  In this case	\
 			      the normal lock path will execute it	\
-			      again and result in a core dump wich does	\
+			      again and result in a core dump which does	\
 			      now show at tbegin but the real executed	\
 			      instruction.				\
 			      However it is not guaranteed that this	\
@@ -131,7 +131,7 @@
 			      memory for being accessible!  */		\
 			   "2: tbegin 0, 0xFF0E\n\t"			\
 			   /* Branch away in abort case (this is the	\
-			      prefered sequence.  See PoP in chapter 5	\
+			      preferred sequence.  See PoP in chapter 5	\
 			      Transactional-Execution Facility		\
 			      Operation).  */				\
 			   "   jnz 0f\n\t"				\

sysdeps/unix/sysv/linux/s390/s390-32/sysdep.h

@@ -42,7 +42,7 @@
    a large offset.  Therefore we must not anymore test for < 0, but test
    for a real error by making sure the value in gpr2 is a real error
    number.  Linus said he will make sure that no syscall returns a value
-   in -1 .. -4095 as a valid result so we can savely test with -4095.  */
+   in -1 .. -4095 as a valid result so we can safely test with -4095.  */
 
 #undef PSEUDO
 #define	PSEUDO(name, syscall_name, args)				      \

sysdeps/unix/sysv/linux/s390/s390-64/sysdep.h

@@ -46,7 +46,7 @@
    a large offset.  Therefore we must not anymore test for < 0, but test
    for a real error by making sure the value in gpr2 is a real error
    number.  Linus said he will make sure that no syscall returns a value
-   in -1 .. -4095 as a valid result so we can savely test with -4095.  */
+   in -1 .. -4095 as a valid result so we can safely test with -4095.  */
 
 #undef PSEUDO
 #define	PSEUDO(name, syscall_name, args)				      \

sysdeps/unix/sysv/linux/s390/sysconf.c

@@ -24,7 +24,7 @@ static long int linux_sysconf (int name);
 
 /* Possible arguments for get_cache_info.
    The values are reflecting the level/attribute/type indications
-   of ecag-instruction (extract cpu attribue).  */
+   of ecag-instruction (extract cpu attribute).  */
 #define CACHE_LEVEL_MAX        8
 #define CACHE_ATTR_LINESIZE    1
 #define CACHE_ATTR_SIZE        2

sysdeps/unix/sysv/linux/scsi/sg.h

@@ -119,7 +119,7 @@ struct sg_scsi_id {
 /* Used by SG_GET_REQUEST_TABLE ioctl().  */
 typedef struct sg_req_info {
     char req_state;     /* 0 -> not used, 1 -> written, 2 -> ready to read */
-    char orphan;        /* 0 -> normal request, 1 -> from interruped SG_IO */
+    char orphan;        /* 0 -> normal request, 1 -> from interrupted SG_IO */
     char sg_io_owned;   /* 0 -> complete with read(), 1 -> owned by SG_IO */
     char problem;       /* 0 -> no problem detected, 1 -> error to report */
     int pack_id;        /* pack_id associated with request */

sysdeps/unix/sysv/linux/semop.c

@@ -20,7 +20,7 @@
 #include <ipc_priv.h>
 #include <sysdep.h>
 
-/* Perform user-defined atomical operation of array of semaphores.  */
+/* Perform user-defined atomic operation of array of semaphores.  */
 
 int
 semop (int semid, struct sembuf *sops, size_t nsops)

sysdeps/unix/sysv/linux/semtimedop.c

@@ -34,7 +34,7 @@ semtimedop_syscall (int semid, struct sembuf *sops, size_t nsops,
 #endif
 }
 
-/* Perform user-defined atomical operation of array of semaphores.  */
+/* Perform user-defined atomic operation of array of semaphores.  */
 int
 __semtimedop64 (int semid, struct sembuf *sops, size_t nsops,
 		const struct __timespec64 *timeout)

sysdeps/unix/sysv/linux/sh/sys/user.h

@@ -21,7 +21,7 @@
 #include <asm/ptrace.h>
 #include <stddef.h>
 
-/* asm/ptrace.h polutes the namespace.  */
+/* asm/ptrace.h pollutes the namespace.  */
 #undef PTRACE_GETREGS
 #undef PTRACE_SETREGS
 #undef PTRACE_GETFPREGS

sysdeps/unix/sysv/linux/sh/sysdep.h

@@ -41,7 +41,7 @@
    might return a large offset.  Therefore we must not anymore test
    for < 0, but test for a real error by making sure the value in R0
    is a real error number.  Linus said he will make sure the no syscall
-   returns a value in -1 .. -4095 as a valid result so we can savely
+   returns a value in -1 .. -4095 as a valid result so we can safely
    test with -4095.  */
 
 #define _IMM1 #-1

sysdeps/unix/sysv/linux/sparc/sparc32/setcontext.S

@@ -102,7 +102,7 @@ weak_alias (__setcontext, setcontext)
 
    If this NOP word does not exist, FDE lookup just repeatedly finds
    __setcontext's FDE in an infinite loop, due to the convention of using
-   'address - 1' for FDE lookup. Modifiying/deleting the below
+   'address - 1' for FDE lookup. Modifying/deleting the below
    __startcontext's FDE has no help on this.  */
 
 	nop

sysdeps/unix/sysv/linux/sparc/sys/ptrace.h

@@ -24,7 +24,7 @@
 #include <bits/wordsize.h>
 
 /* Linux/SPARC kernels up to 2.3.18 do not care much
-   about what namespace polution, so use a kludge now.  */
+   about what namespace pollution, so use a kludge now.  */
 #undef PTRACE_GETREGS
 #undef PTRACE_SETREGS
 #undef PTRACE_GETFPREGS

sysdeps/unix/sysv/linux/sparc/sys/ucontext.h

@@ -164,7 +164,7 @@ typedef greg_t  gregset_t[__NGREG];
  * The following structures define how a register window can appear on the
  * stack. This structure is available (when required) through the `gwins'
  * field of an mcontext (nested within ucontext). SPARC_MAXWINDOW is the
- * maximum number of outstanding regiters window defined in the SPARC
+ * maximum number of outstanding registers window defined in the SPARC
  * architecture (*not* implementation).
  */
 # define __SPARC_MAXREGWINDOW	31	/* max windows in SPARC arch. */
@@ -200,7 +200,7 @@ typedef struct
 /*
  * struct fq defines the minimal format of a floating point instruction queue
  * entry. The size of entries in the floating point queue are implementation
- * dependent. The union FQu is guarenteed to be the first field in any ABI
+ * dependent. The union FQu is guaranteed to be the first field in any ABI
  * conformant system implementation. Any additional fields provided by an
  * implementation should not be used applications designed to be ABI conformant. */
 

sysdeps/unix/sysv/linux/spawni.c

@@ -203,7 +203,7 @@ __spawni_child (void *arguments)
 	      {
 		/* POSIX states that if fildes was already an open file descriptor,
 		   it shall be closed before the new file is opened.  This avoid
-		   pontential issues when posix_spawn plus addopen action is called
+		   potential issues when posix_spawn plus addopen action is called
 		   with the process already at maximum number of file descriptor
 		   opened and also for multiple actions on single-open special
 		   paths (like /dev/watchdog).  */
@@ -325,7 +325,7 @@ __spawnix (pid_t * pid, const char *file,
   ptrdiff_t argc = 0;
   /* Linux allows at most max (0x7FFFFFFF, 1/4 stack size) arguments
      to be used in a execve call.  We limit to INT_MAX minus one due the
-     compatiblity code that may execute a shell script (maybe_script_execute)
+     compatibility code that may execute a shell script (maybe_script_execute)
      where it will construct another argument list with an additional
      argument.  */
   ptrdiff_t limit = INT_MAX - 1;

sysdeps/unix/sysv/linux/test-errno-linux.c

@@ -70,7 +70,7 @@
    Some tests assume "/bin/sh" names a file that exists and is not a
    directory.  */
 
-/* Evalutes to the arguments in a list initializer which can be used
+/* Evaluates to the arguments in a list initializer which can be used
    as a single macro argument.  */
 #define LIST(...) { __VA_ARGS__ }
 

sysdeps/unix/sysv/linux/tst-fallocate-common.c

@@ -89,7 +89,7 @@ do_test_with_offset (off_t offset)
     FAIL_EXIT1 ("fail trying to read " XSTR (BLK_SIZE) " bytes");
 
   if (memcmp (bwrite, bread, BLK_SIZE) != 0)
-    FAIL_EXIT1 ("buffer written different than buffer readed");
+    FAIL_EXIT1 ("buffer written different from buffer read");
 
   return 0;
 }

sysdeps/unix/sysv/linux/tst-o_path-locks.c

@@ -55,7 +55,7 @@ probe_lock (void)
   *shared_errno = -1;
   support_isolate_in_subprocess (subprocess, NULL);
   if (*shared_errno == 0)
-    /* Lock was aquired by the subprocess, so this process has not
+    /* Lock was acquired by the subprocess, so this process has not
        locked it.  */
     return false;
   else

sysdeps/unix/sysv/linux/tst-ofdlocks.c

@@ -60,7 +60,7 @@ do_test (void)
   int fd = open64 (temp_filename, O_RDWR, 0666);
   TEST_VERIFY_EXIT (fd != -1);
 
-  /* It tries then to allocate another open file descriptior with a valid
+  /* It tries then to allocate another open file descriptor with a valid
      non-LFS bits struct flock but which will result in a conflicted region
      which can not be represented in a non-LFS struct flock.  */
   struct flock lck = {

sysdeps/unix/sysv/linux/tst-process_mrelease.c

@@ -61,7 +61,7 @@ do_test (void)
   int pidfd = pidfd_open (pid, 0);
   TEST_VERIFY (pidfd != -1);
 
-  /* The syscall only succeedes if the target process is exiting and there
+  /* The syscall only succeeds if the target process is exiting and there
      is no guarantee that calling if after pidfd_send_signal will not error
      (ince the process might have already been reaped by the OS).  So just
      check if it does fail when the process is stll running.  */

sysdeps/unix/sysv/linux/tst-skeleton-affinity.c

@@ -18,7 +18,7 @@
 
 /* This file is included by the tst-affinity*.c files to test the two
    variants of the functions, under different conditions.  The
-   following functions have to be definied:
+   following functions have to be defined:
 
    static int getaffinity (size_t, cpu_set_t *);
    static int setaffinity (size_t, const cpu_set_t *);

sysdeps/unix/sysv/linux/tst-socket-timestamp-compat.c

@@ -77,7 +77,7 @@ static void
 do_test_large_buffer (bool mc)
 {
   struct mmsghdr mmhdr = { 0 };
-  /* It should be large enought for either timeval/timespec and the
+  /* It should be large enough for either timeval/timespec and the
      64 time type as well.  */
 
   union
@@ -142,7 +142,7 @@ do_test_large_buffer (bool mc)
 
 /* Check if recvmsg does not create the additional 64 bit timestamp if
    only 32 bit timestamp is enabled if the ancillary buffer is not large
-   enought.  Also checks if MSG_CTRUNC is set iff for 64 bit recvmsg
+   enough.  Also checks if MSG_CTRUNC is set iff for 64 bit recvmsg
    symbol.  */
 static void
 do_test_small_buffer (bool mc)

sysdeps/unix/sysv/linux/tst-socket-timestamp.c

@@ -284,7 +284,7 @@ do_test_multiple_ancillary (void)
     TEST_VERIFY_EXIT (r != -1);
   }
 
-  /* Enougth data for default SO_TIMESTAMP, the IP_RECVORIGDSTADDR, and the
+  /* Enough data for default SO_TIMESTAMP, the IP_RECVORIGDSTADDR, and the
      extra 64-bit SO_TIMESTAMP.  */
   enum { msgbuflen = CMSG_SPACE (2 * sizeof (uint64_t))
 		     + CMSG_SPACE (sizeof (struct sockaddr_in))

sysdeps/unix/sysv/linux/tst-sysvmsg-linux.c

@@ -55,7 +55,7 @@ struct test_msginfo
   int msgmni;
 };
 
-/* It tries to obtain some system-wide SysV messsage queue information from
+/* It tries to obtain some system-wide SysV message queue information from
    /proc to check against IPC_INFO/MSG_INFO.  The /proc only returns the
    tunables value of MSGMAX, MSGMNB, and MSGMNI.
 

sysdeps/unix/sysv/linux/tst-tgkill.c

@@ -66,7 +66,7 @@ subprocess (void *closure)
 {
   int original_tid = expected_signal_tid;
 
-  /* Do not expect that the folloing signals are delivered to the
+  /* Do not expect that the following signals are delivered to the
      subprocess.  The parent process retains the original
      expected_signal_tid value.  */
   expected_signal_tid = 0;
@@ -77,7 +77,7 @@ subprocess (void *closure)
   TEST_COMPARE (expected_signal_tid, 0);
 
   /* This call has the correct PID/TID combination and is therefore
-     expected to suceed.  */
+     expected to succeed.  */
   TEST_COMPARE (tgkill (getppid (), original_tid, SIGUSR1), 0);
 }
 

sysdeps/unix/sysv/linux/tst-ttyname.c

@@ -508,7 +508,7 @@ run_chroot_tests (const char *slavename, int slave)
     char *linkname = xasprintf ("/proc/self/fd/%d", slave);
     char *target = proc_fd_readlink (linkname);
     free (linkname);
-    /* Depeding on how we set up the chroot, the kernel may or may not
+    /* Depending on how we set up the chroot, the kernel may or may not
        trim the leading path to the target (it may give us "/6",
        instead of "/dev/pts/6").  We test it both ways (do_in_chroot_1
        and do_in_chroot_2).  This test group relies on the target

sysdeps/unix/sysv/linux/x86/elision-conf.c

@@ -49,7 +49,7 @@ struct elision_config __elision_aconf =
 static __always_inline void
 do_set_elision_enable (int32_t elision_enable)
 {
-  /* Enable elision if it's avaliable in hardware. It's not necessary to check
+  /* Enable elision if it's available in hardware. It's not necessary to check
      if __libc_enable_secure isn't enabled since elision_enable will be set
      according to the default, which is disabled.  */
   if (elision_enable == 1)

sysdeps/unix/sysv/linux/x86_64/sysdep.h

@@ -43,7 +43,7 @@
    might return a large offset.	 Therefore we must not anymore test
    for < 0, but test for a real error by making sure the value in %eax
    is a real error number.  Linus said he will make sure the no syscall
-   returns a value in -1 .. -4095 as a valid result so we can savely
+   returns a value in -1 .. -4095 as a valid result so we can safely
    test with -4095.  */
 
 /* We don't want the label for the error handle to be global when we define