* src/tty.c (TTY_USAGE): Rename from TTY_FAILURE, since this
is used only for usage failures. All uses changed.
(TTY_TTYNAME_FAILURE): New constant.
(main): Remove no-longer-needed assignment of ENOENT to errno.
Make status-setting clearer too.
Report an error if ttyname fails even though stdin is a terminal,
instead of silently pretending that stdin is not a terminal.
* tests/tty/tty.sh: Test for this issue. This should fix Bug#78244.
* tests/stty/stty-invalid.sh: Adjust to what is now invalid.
* tests/stty/stty.sh: Add checks for valid speed variants.
* tests/stty/bad-speed.sh: New test to ensure unsupported speeds
are diagnosed.
Problem reported by Collin Funk in:
https://lists.gnu.org/r/bug-gnulib/2025-06/msg00094.html
* tests/date/date-debug.sh: Also allow NetBSD 10 mktime behavior.
Although NetBSD contradicts POSIX, POSIX is likely wrong here and
I vaguely recall that there’s a POSIX correction in progress
that will allow the NetBSD behavior.
These tests were seen to hang on PPC Mac OS X 10.4.11
* tests/cp/existing-perm-race.sh: Protect fifo interactions
with a 1 minute timeout.
* tests/cp/file-perm-race.sh: Likewise.
Reported in https://bugs.gnu.org/78509
* src/sort.c (begfield): Check pointer adjustment
to avoid Out-of-range pointer offset (CWE-823).
(limfield): Likewise.
* tests/sort/sort-field-limit.sh: Add a new test,
which triggers with ASAN or Valgrind.
* tests/local.mk: Reference the new test.
* NEWS: Mention bug fix introduced in v7.2 (2009).
Fixes https://bugs.gnu.org/78507
On so-far-only-theoretical platforms with 128-bit uintmax_t,
'factor' would misbehave by not factoring enough.
Work around the bug (at a performance cost)
and document the issue. I hope someone with
more time and expertise can fix the performance cost
that this introduces.
To reproduce the correctness bug, build with
'gcc -DUSE_INT128 -DEXHIBIT_INT128_BUG';
'make check' should fail due to the new test case.
* src/factor.c (USE_INT128): New macro.
(wide_uint, wide_int, W_TYPE_SIZE, WIDE_UINT_MAX):
Define to proper values if USE_INT128.
(prime_p) [!EXHIBIT_INT128_BUG]: Work around bug
with 128-bit wide_uint, at some performance cost.
* tests/factor/factor.pl (bug-with-128-bit-uintmax_t):
New test.
* tests/ls/acl.sh: In constrained environments, like with
setxattr() disabled for example, require_acl_ does not
check for the required functionality, so use the more
stringent require_setfacl_ instead.
Reported at https://github.com/NixOS/nixpkgs/issues/394953
* tests/misc/csplit-heap.sh: More memory is required to avoid
a false failure on CheriBSD with its heap accounting overhead.
This is confirmed to still trigger with the original memory leak
being tested.
* doc/coreutils.texi (sleep invocation): Mention that suffixes are
best avoided with hex arguments.
(timeout invocation): Likewise.
* tests/misc/sleep.sh: Ensure 'd' is not interpreted as "day".
* .gitignore: Add /lib/fenv.h to ignore list.
* tests/timeout/timeout-parameters.sh: Use a sleep length of 10s
to be consistent with the pattern where we use this larger time
when it does not slow down a test, but also provides protection
against a hung test, and better avoidance of false failures due
to races on very loaded systems. Also fix the setting of FAIL.
* tests/timeout/timeout-large-parameters.sh: Remove duplicated test.
This handles timeouts like 16777216.000000001 correctly;
formerly the subsecond part of that timeout was ignored.
* bootstrap.conf (gnulib_modules): Add fenv-rounding, signbit.
* src/local.mk (src_timeout_LDADD): Append $(FENV_ROUNDING_LIBM).
* src/timeout.c: Include fenv.h, math.h.
Don’t include xstrtod.h, as xstrtod’s checking now gets in the way.
(parse_duration): Round up when calling cl_strtod.
Check for -1e-1000. Don’t double-round 1e-9.
* tests/timeout/timeout-parameters.sh: Test for -0.1,
-1e-1000, 1e-1000.
* cfg.mk (codespell_ignore_words_list): Ignore false-positives.
(exclude_file_name_regexp--sc_codespell): Skip some file names.
* doc/coreutils.texi (mktemp invocation): Use "alphanumeric" which is
consistent with the rest of the documentation.
* src/expand-common.c: Fix typo.
* src/ls.c: Likewise.
* tests/split/l-chunk-root.sh: Likewise.
* tests/sort/sort-h-thousands-sep.sh: sv_SE defaults to UTF-8
on macOS 18, so avoid the test for multi-byte separators.
Fixes https://bugs.gnu.org/77509
* src/sort.c (key_warnings): Remove "note " from the start
of a usually informational message, as this simplifies translation.
* tests/sort/sort-debug-warn.sh": Adjust accordingly.
Fixes https://bugs.gnu.org/75763
* tests/env/env-S.pl (cf): Remove uses of 'my' after the variable has
been declared.
* tests/factor/factor.pl (t): Likewise.
* tests/misc/fold.pl (prog): Remove duplicate assignment.
* cfg.mk (sc_prohibit_bare_set): A new syntax check to
ensure we protect use of set with '--', so that args
beginning with '-' are not interpreted as options,
and if no args are present, all existing args are cleared.
* tests/cp/symlink-slash.sh: Add -- to unprotected use of set.
* tests/ls/ls-time.sh: Likewise.
* tests/ls/symlink-slash.sh: Likewise.
* tests/mkdir/perm.sh: Likewise.
* tests/mkdir/selinux.sh: Likewise.
* tests/mkdir/smack-no-root.sh: Likewise.
* tests/mkdir/smack-root.sh: Likewise.
* tests/mv/part-hardlink.sh: Likewise.
* tests/nice/nice.sh: Likewise.
* tests/stty/stty-row-col.sh: Likewise.
* src/ls.c (main): Flag that we need to stat()
if we're going to get security context (call file_has_aclinfo_cache).
(file_has_aclinfo_cache): Be defensive and only lookup the device
for the file if the stat has been performed.
(has_capability_cache): Likewise.
* tests/ls/selinux-segfault.sh: Add a test case.
* NEWS: Mention the bug fix.
Reported by Bruno Haible.
* tests/head/head-c.sh: Pass a more similar operation
to get_min_ulimit_v_, so we get a more appropriate limit.
This was seen to be significant with CheriBSD.
* tests/df/skip-duplicates.sh: Just skip this test if we fail
to build the shared lib. This fails on Solaris 11 at least
due to no HAVE_MNTENT_H. Note HAVE_SYS_MNTENT_H does not
suffice for this wrapper code.
* tests/df/no-mtab-status.sh: Likewise.
* init.cfg (ulimit_supported_): skip_ if the ulimit -v
takes too long, which was seen with bash 5.2 on Solaris 11,
where fork() returned EAGAIN under memory constraints,
and bash retried for about 16 seconds.
(get_min_ulimit_v_): Break early if skipped.
* tests/misc/write-errors.sh: Be more conservative and
skip on failure to determine min ulimit.
* tests/tail/tail-c.sh: On Solaris 11, tail -c 4096 /dev/urandom,
will induce an lseek(,-4096,SEEK_END) which returns -4096 without
setting errno, and a subsequent read() then gives EINVAL.
Since tailing the end of a psuedo device is an edge case,
we just verify that we don't spin reading the device forever.
* tests/misc/write-errors.sh: Reset SIGPIPE to the default (terminate)
disposition, so that the test doesn't erroneously fail due to an
ignored SIGPIPE in the test environment.
* src/csplit.c (get_first_line_in_buffer): Don't exit here
upon empty input, rather indicate no input in the return
to let callers handle in a more consistent fashion.
* NEWS: Mention the bug fix.
* tests/csplit/csplit.sh: Add a test case.
Reported by Daniel Hofstetter.
* src/tail.c (tail_file): Open files with O_NONBLOCK
if we might need async processing.
(pipe_bytes): Ignore EAGAIN read() errors.
(pipe_lines): Likewise.
* tests/tail/pid-pipe.sh: Add a new test.
* tests/local.mk: Reference the new test.
* NEWS: Mention the bug fix.
Reported by Berhard Voelker.
* src/copy.h: Change update member from bool to enum.
* src/copy.c: s/interactive == I_ALWAYS_NO/update == UPDATE_NONE_FAIL/;
s/interactive == I_ALWAYS_SKIP/update == UPDATE_NONE/;
s/update/update == UPDATE_OLDER/;
* src/install.c: Init with UPDATE_ALL, rather than false.
* src/cp.c: Likewise. Simply parse -f,-i,-n to x.interactive,
and parse --update to x.update.
* src/mv.c: Likewise.
* tests/cp/cp-i.sh: Add a test case where -n --update -i
honors the --update option, which would previously have been
ignored due to the preceding -n.
Since coreutils 9.3 we had --update={all,older} override -i.
In coreutils 9.5 this was expanded to -u
(to make it consistent with --update=older).
This patch reinstates things so that -i combines with -u instead.
I.e. have -i be protective, rather than selective (like -u).
The -f option of mv is similarly adjusted in this patch,
so now --update does not override any of -f,-i,-n.
* NEWS: Mention the bug fix.
* src/cp.c (main): Don't have -u disable prompting.
* src/mv.c (main): Likewise.
* tests/cp/cp-i.sh: Add a test case for -i.
* tests/mv/update.sh: Likewise.
* tests/mv/i-3.sh. Add a test case for -f.
Fixes https://bugs.gnu.org/70887
Update to latest gnulib with new copyright year.
Run "make update-copyright" and then...
* gnulib: Update included in this commit as copyright years
are the only change from the previous gnulib commit.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
* tests/sample-test: Adjust to use the single most recent year.
* src/numfmt.c (simple_strtod_human): Only look for 'i'
after detecting a suffix.
* tests/misc/numfmt.pl: Add a test case.
* NEWS: Mention the bug fix.
Reported at https://bugs.debian.org/1091758
The 0 (EXIT) signal is valid as input
(and useful to determine existence of a pid),
so list it along with other signals.
* doc/coreutils.texi (signal specifications): Document 0, "EXIT".
* src/kill.c (list_signals): Start loops at 0, not 1.
* tests/misc/kill.sh: Add a test case.
* NEWS: Mention the change in behavior.
* src/tail.c (tail_forever): Without --retry, exit with failure
status like we do for the inotify case (since v8.11-15-g61de57cd2).
This is also consistent with the failure exit if no file was
accessible at tail startup.
* tests/tail/follow-stdin.sh: Tweak due to earlier exit.
* tests/tail/follow-name.sh: Test with and without inotify.
* NEWS: Mention the bug fix.
Require --retry to continue to track files upon rename.
We already unfollowed a file if it was renamed
to another file system (unlinked), so this makes the behavior
consistent if renaming to a file in the same file system.
I.e. --follow=name without --retry, means unfollow if the
name is unlinked or moved, so this change ensures that
behavior for all rename cases.
Related commits: v8.0-121-g3b997a9bc, v8.23-161-gd313a0b24
* src/tail.c (tail_forever_notify): Remove watch for a renamed file
if --retry is not specified.
* tests/tail/F-vs-rename.sh: Related test cleanup.
* tests/tail/follow-name.sh: Add a test case.
* NEWS: Mention the bug fix.
Fixes https://bugs.gnu.org/74653
* tests/ls/dired.sh: macOS normalizes unicode characters to decomposed
(NFD) form when storing names in the file system, which breaks the
round-trip comparison employed by the test. So instead use a character
which does not decompose; verified with:
echo æ | uconv -f utf8 -t utf8 -x nfd | od -Ax -tx1z