Prompted by the following 'make syntax-check' failure:
cppi: src/factor.c: line 175: not properly indented
cppi: src/factor.c: line 176: not properly indented
maint.mk: incorrect preprocessor indentation
make: *** [cfg.mk:750: sc_preprocessor_indentation] Error 1
* src/factor.c: Filter through 'cppi -a'.
* src/ls.c: Do not include <selinux/selinux.h> or "smack.h".
Include <linux/attr.h> if HAVE_LINUX_ATTR_H, for XATTR_NAME_CAPS.
(free_ent): Use aclinfo_scontext_free to free f->scontext.
(getfilecon_cache): Remove; no longer needed.
(file_has_aclinfo_cache): Rename from file_has_acl_cache,
and use file_has_aclinfo instead of file_has_acl. All uses changed.
(gobble_file): Use file_has_aclinfo instead of file_has_acl, so
that we get more info about the file before deciding whether to
issue further syscalls for it. Let file_has_aclinfo worry about
smack and SELinux. Call has_capability only if the xattr list
mentions XATTR_NAME_CAPS.
* src/factor.c (lbuf_putint_append): New function, with
most of the old lbuf_putint body. Do the umaxtostr stuff
by hand so that we needn’t worry about the trailing NUL.a
Do the string copy by hand since the string is so short.
(lbuf_putint): Reimplement in terms of lbuf_putint_append.
Omit last arg, which is no longer needed. All callers changed.
(print_uuint): Rewrite to avoid recursion, using
lbuf_putint_append for the usual case.
* src/factor.c (W_TYPE_SIZE): Simplify by always defining
to UINTMAX_WIDTH.
(W): Remove. All uses replaced by W_TYPE_SIZE.
We no longer need one of its static_asserts.
Previously, the code used stdio buffers for gmp numbers,
and did its own buffering for smaller numbers. This meant
for more flushing than was needed. The code now uses its
own buffering for all standard output, which makes for
less flushing and fewer writes.
* src/factor.c (lbuf_half_flush): New function, taken from the
body of lbuf_putnl.
(lbuf_putnl): Use it.
(lbuf_putmpz): New function, to output an mpz without using stdio.
(print_factors): Output via functions instead of via stdio.
* src/factor.c (struct lbuf_, lbuf, lbuf_alloc): Remove.
All uses removed.
(FACTOR_PIPE_BUF): Now a constant instead of a macro.
Increase to PIPE_BUF if available.
(lbuf_buf, lbuffered): New static vars, replacing lbuf.
All uses changed.
(lbuf_flush): Avoid unlikely recursion on write failure.
(lbuf_putc): Now simply adds a byte to the buffer.
(lbuf_putnl): Do the work of the old lbuf_putc ('\n').
Use changed. Use memrchr to find the newline.
(lbuf_putint): Widths are now int, not size_t.
* src/factor.c (uuset): New function.
(mod2): Return uuint rather than having half the returned value
stored via a pointer. This makes the code a bit easier to read
and can help the compiler avoid aliasing issues. All callers changed.
This refactors to add a new type, a uintmax_t pair, which
can simplify some code without slowing it down.
* src/factor.c (uuint): New type.
(lo, hi, hiset, make_uuint): New functions.
(struct factors.plarge): Use the new type. All uses changed.
* bootstrap.conf (gnulib_modules): Add stdc_trailing_zeros.
* cfg.mk (_gl_TS_unmarked_extern_vars): Remove factor_clz_tab,
as it’s no longer present.
* src/factor.c: Include stdbit.h.
(__clz_tab, factor_clz_tab): Remove.
(ASSERT, UHWtype, __GMP_DECLSPEC): Use simpler way to pacify
-Wunused-macros.
(count_leading_zeros, count_trailing_zeros):
Remove. All uses replaced by stdc_leading_zeros, stdc_trailing_zeros.
(factor_using_division, prime2_p): Add a couple of ‘assume’s
so that GCC knows the stdc_* calls are nonzero and can
optimize accordingly.
* src/factor.c (mod2): Work even if cntd <= cnta. The old version
of the code assumed that shifts by N had unspecified behavior
unless 0 <= N < wordsize. Although this assumption is portable to
all known practical platforms, the C standard says these shifts
have undefined behavior and some pedantic platforms check this.
* tests/factor/create-test.sh:
* tests/local.mk (factor_tests): New test t37.
* src/sort.c (usage): Don't mention the ambiguous "manual",
rather "full documentation", echoing the language at the
bottom of each coreutils man page.
Fixes https://bugs.gnu.org/72914
* src/echo.c (usage): Use printf(1) rather than 'printf',
which is marked up more appropriately, and can be
referenced by some man page readers.
Fixes https://bugs.gnu.org/72914
* src/printf.c (print_formatted): Add support for %i$ indexed args.
* tests/printf/printf-indexed.sh: Add a new file of test cases.
* tests/local.mk: Reference the new test file.
* doc/coreutils.texi (printf invocation): Mention how mixed
processing of indexed and sequential references are supported,
unlike the printf(2) library function.
* NEWS: Mention the new (POSIX:2024) feature.
Addresses https://bugs.gnu.org/73068
* NEWS: Mention the change in behavior.
* src/install.c (need_copy): s/lstat/stat/ for the source.
* tests/install/install-C.sh: Add test cases
(and improve existing test case which wan't valid
due to the existing non standard modes on test files).
Addresses https://bugs.gnu.org/72707
* boostrap.conf (gnulib.modules): Add xvasprintf, which
had been omitted by mistake.
* src/copy.c, src/dd.c, src/test.c: Don't include verror.h,
as Gnulib removed it.
Support overriding previous sorting options
with an explicit --sort=name option.
* doc/coreutils.texi (ls invocation): Document the new option.
* src/ls.c (usage): Likewise.
(sort_args): Add the "name" entry, and sort to be consistent
with the ordering presented in --help.
* tests/ls/ls-time.sh: Add test cases.
* NEWS: Mention the new feature.
Suggested by: Tzvetelin Katchov
* src/printf.c: Remove redundant comment.
State explicitly that the leading 0 is the exception
from normal escape processing. Remove a full stop for consistency.
* doc/coreutils.texi (printf invocation): Add a reference
to C99 string escapes since these are not mentioned
in the referenced glibc printf info. Also explicitly state
the leading 0 exception. Also use NNN rather than OOO
to be consistent with the --help documentation.
Also remove and extraneous '\' and fix grammar in the info
regarding the ninth bit.
Addresses https://bugs.gnu.org/72657
Although these patches don’t affect user-visible behavior,
they do clean up the source code a bit, and the
machine code should be a tiny bit more efficient.
* src/cat.c (simple_cat, cat):
* src/csplit.c (read_input):
* src/head.c (copy_fd, elide_tail_bytes_pipe)
(elide_tail_lines_pipe, elide_tail_lines_seekable, head_bytes)
(head_lines):
* src/install.c (have_same_content):
* src/tac-pipe.c (buf_init_from_stdin):
* src/tac.c (tac_seekable, copy_to_temp):
* src/tail.c (dump_remainder, file_lines, pipe_lines)
(pipe_bytes, start_bytes, start_lines, tail_forever_inotify):
* src/tr.c (plain_read):
Adjust to recent Gnulib changes by using new types
for safe_read, safe_write, full_read, full_write.
Not clear that the overflows could be exploited,
but they made the code confusing.
* src/head.c (elide_tail_bytes_pipe): Don’t convert uintmax_t
to size_t first thing; wait until it’s known the value will fit,
and then use idx_t rather than size_t to prefer signed types.
Prefer idx_t in nearby code, too.
Rename locals n_elide_0 to n_elide (for consistency elsewhere)
and n_elide to in_elide.
Remove bogus (SIZE_MAX < n_elide + READ_BUFSIZE) test;
in the typical case where n_elide’s type was the same as
that of SIZE_MAX, the test never succeeded, and in the
less-common case where n_elide was wider than size_t,
the addition could silently overflow, causing the test
to fail when it should succeed. The test is not needed anyway now.
Add static asserts to document code assumptions.
Redo the ! (n_elide <= HEAD_TAIL_PIPE_BYTECOUNT_THRESHOLD) case
so that it works with enormous values of n_elide even on
32-bit platforms; for example, n_bufs is now uintmax_t not size_t.
Simplify by using xpalloc instead of by-hand code.
Remove bogus ‘if (rem)’ test, as rem is always nonzero.
* src/tail.c (tail_lines): If skipping all input, use lseek if
possible.
(parse_options): Allow counts to exceed 2**64.
(main): Don’t subtract 1 from UINTMAX_MAX, since it stands
for infinity in this context.
(main): Also don’t read anything when given infinite elisions.
* tests/tail/tail.pl: Adjust to match new behavior. Rename err-5
test to big-c and expect the invocation to succeed, since ‘tail
-c99999999999999999999’ now succeeds instead of (unnecessarily)
failing.
* src/head.c (head): Optimize for -n-HUGE, where HUGE exceeds
2**64 - 2.
(string_to_integer): Return UINTMAX_MAX for too-large numbers,
instead of failing.
(main): Omit no-lnger-necessary test for byte count overflow.
Also, prepare for allowing some arguments to overflow
without that being an error.
* gl/lib/xdectoint.c: Do not include stddef.h,
since we no longer use ‘unreachable’.
(xnumtoimax, xnumtoumax, __xnumtoint):
New arg FLAGS. All callers changed.
Stop using __xdectoint_signed. All definers removed.
* gl/lib/xdectoint.h (XTOINT_MIN_QUIET, XTOINT_MAX_QUIET)
(XTOINT_MIN_RANGE, XTOINT_MAX_RANGE): New flag constants.
* src/fmt.c (main):
* src/fold.c (main):
* src/nl.c (main):
* src/pr.c (getoptnum):
* src/split.c (main):
Use XTOINT_MIN_RANGE and XTOINT_MAX_RANGE if appropriate.
* src/pr.c (getoptnum): Return int rather than returning void
and storing through int *.
* src/stty.c (apply_settings):
Use ckd_add to check for overflow instead of doing it by hand.
(integer_arg): Accept and return uintmax_t, not unsigned long.
* src/ls.c: Track if --time=mtime is explicitly specified,
so that we can apply the GNU extension of sorting by the
specified time, when not displaying (-l not specified),
and not explicitly sorting (-t not specified).
* tests/ls/ls-time.sh: Add / Update test cases.
Fixes https://bugs.gnu.org/71803
* src/stat.c (human_fstype): Rename "FUSEBLK" to "FUSE" to sync with
kernel adjustments. Add "bcachefs", and "pidfs". Both are local,
with the latter being similar to "proc" which is also local.
* NEWS: Mention the change in behavior, and the improvement.