This simplifies memory allocation a bit, and removes an arbitrary
limitation from numfmt, which formerly limited cell output to 127
bytes.
* bootstrap.conf (gnulib_modules): Remove mbsalign, strncat.
Add strnlen (the code already used strnlen directly, and we were
saved only because Gnulib used the module indirectly)
* gl/lib/mbsalign.c, gl/lib/mbsalign.h, gl/modules/mbsalign:
* gl/modules/mbsalign-tests, gl/tests/test-mbsalign.c: Remove.
* src/df.c, src/ls.c: Do not include mbsalign.h.
(MBSWIDTH_FLAGS): New constant, now used for all
mbswidth calls. All callers changed to check for -1 return.
* src/df.c (struct field_data_t): ‘width’ is now int not size_t,
since mbswidth can’t do widths greater than INT_MAX anyway.
Replace ‘align’ with ‘align_right’. All uses changed.
(print_table): Redo to avoid the need for ambsalign.
(get_header, get_dev): mbswidth returns int, not size_t.
* src/ls.c (MAX_MON_WIDTH): Remove; no longer used.
(abmon_init): Use strnlen to cheaply discard too-long month names.
Align by hand instead of using mbsalign.
* src/numfmt.c: Include stdckdint.h, mbswidth.h.
Do not include mbsalign.h.
(padding_buffer_size): Now idx_t. All uses changed.
(padding_width): Now intmax_t, since it’s no longer an object
size. Its sign now records alignment. All uses changed.
(zero_padding_width): Now int, since it’s given to sprintf.
All uses changed.
(padding_alignment): Remove; it’s now taken from padding_width’s sign.
(double_to_human): Return string length. BUF_SIZE arg is now idx_t.
Include suffix in output. All callers changed. Simplify by not
calling strncat or stpcpy. Calculate fmt size bound more carefully.
(setup_padding_buffer): Remove. All uses removed.
(parse_format_string): Use intmax_t, not long, for pad.
On overflow, set widths to large values that cause later code
to do the right thing, rather than separately checking for
overflow here.
(prepare_padded_number): Return bool, not int 0/1. New arg
PADDING. All uses changed. Do not limit padded output to 127
bytes; instead, use xpalloc to expand the output buffer.
(print_padded_number): New arg PADDING. All uses changed.
(process_suffixed_number): Simplify.
(main): Take extremum if xstrtoimax overflows, as this does
the right thing.
* tests/misc/numfmt.pl: New test suf-20 to test for truncation bug.
Remove tests pad-3.2, fmt-err-7, as they’re no longer invalid but
are quite expensive.
Most of this just affects commentary and documentations. The only
significant behavior change is translating author names via
proper_name_lite rather than proper_name_utf8, or not translating
them at all. proper_name_lite is good enough for coreutils and
avoids the bloat that had coreutils not using Gnulib proper_name.
* bootstrap.conf (gnulib_modules): Use propername-lite instead
of propername.
(XGETTEXT_OPTIONS): Look for proper_name_lite instead of for
proper_name_utf8.
* cfg.mk (local-checks-to-skip): Remove
sc_proper_name_utf8_requires_ICONV, since we no longer use
proper_name_utf8.
(old_NEWS_hash): Update.
(sc_check-I18N-AUTHORS): Remove; no longer needed.
* src/system.h (write_error): Also call fpurge(), which was seen to
be needed on FreeBSD 13.1 to avoid duplicated write errors.
* src/head.c (xwrite_stdout): Likewise.
* bootstrap.conf: Depend on fpurge.
Reported by Bruno Haible.
* src/cp.c (main): Set default reflink mode appropriately
with --sparse=never.
* src/copy.c (infer_scantype): Add a comment to related code.
* tests/cp/sparse-2.sh: Add a test case.
* NEWS: Mention the bug.
* src/uptime.c (print_uptime): Check for overflow
when computing uptime. Use C99-style decl after statements.
Do not let an idx_t value go negative.
(print_uptime, uptime): Be more generous about read_utmp failures,
or when read_utmp does not report the boot time. Instead of
failing, warn but keep going, printing the information that we did
get, and then exit with nonzero status.
(print_uptime): Return the desired exit status. Caller changed.
* src/uptime.c: Don't include c-strtod.h.
(print_uptime): Don't read /proc/uptime, because the value it provides
does not change when a date adjustment occurs.
* bootstrap.conf (gnulib_modules): Remove 'uptime'.
When we are only interested in entries of type USER_PROCESS, tell
read_utmp that it does not need to determine the boot time.
* src/pinky.c (short_pinky): Pass option READ_UTMP_USER_PROCESS.
* src/users.c (users): Likewise.
* src/who.c (who): Likewise, if calling list_entries_who.
(This patch is coauthored with Bruno Haible,
with original version at <https://bugs.gnu.org/64937#>.)
This updates the gnulib submodule to latest.
For year-2038 safety on Linux/{x86,arm},
this adds an --enable-systemd option to ‘configure’.
The idea is that this sort of thing will become the default
after it has been tested more.
* configure.ac: Don't test whether struct utmp and struct utmpx
have the ut_host field; this is now done in gnulib's readutmp module.
* src/local.mk: Link the programs 'pinky', 'uptime', 'users',
'who' with $(READUTMP_LIB).
* src/pinky.c, src/who.c:
Test HAVE_STRUCT_XTMP_UT_HOST instead of HAVE_UT_HOST.
* src/pinky.c (print_entry):
* src/who.c (print_user, print_deadprocs, print_login)
(print_initspawn, scan_entries):
Support the situation where ut_line is a 'char *' rather than a
'char[]' of fixed size. Likewise for ut_user and ut_host.
(make_id_equals_comment): Likewise for ut_id.
* src/pinky.c (print_entry):
* src/who.c (print_user):
Open /dev to simplify looking up its entries.
Don’t use printf if the output might in theory be longer than INT_MAX.
* src/pinky.c (scan_entries, short_pinky):
* src/uptime.c (print_uptime, uptime):
* src/users.c (list_entries_users, users):
* src/who.c (who):
Use idx_t where new read_utmp needs it.
* src/system.h (STREQ_LEN): Add comment that last arg can be -1.
* src/uptime.c (print_uptime): Prefer signed types.
Fix unlikely bug on platforms with 32-bit long and 64-bit time_t
if the idle time exceeds 2**31 days (about 6 million years...).
* src/cut.c: Complete the error-handling improvements started in
commit e0a4a60af5, by adding a couple of remaining checks for putchar().
While there, sprinkle a few rather useful comments, and perform a few
small code cleanups, to make the code and the comments more uniform
and more conformant to the official coding style. Also make the help
message slightly more uniform.
* src/ioblksize.h: Avoid syntax check with redundant idx.h inclusion.
* src/od.c (FMT_BYTES_ALLOCATED): Increase by two to avoid:
error: '%s' directive writing between 1 and 2 bytes into a region
of size between 1 and 4 [-Werror=format-overflow=]
(maint): Use %td to print idx_t rather than invalid %jt format.
* src/pinky.c (idle_string): Prefer intmax_t to unsigned long int;
this avoids an overflow on platforms where unsigned long is 32
bits and time_t is 64 bits (the bug could occur on such a system
that was idle for more than 6 million years, so it’s a bit
hard to supply a test case...).
* src/numfmt.c (suffix_power_char, powerld, expld)
(simple_strtod_int, double_to_human, prepare_padded_number)
(process_suffixed_number): Prefer signed types.
(process_suffixed_number): Fix an unlikely bug if an
arg has exactly 2**32 spaces at the start.
* src/kill.c (list_signals):
Prefer signed types. This avoids undefined behavior on
theoretical platforms where unsigned and signed int have
different representations.
* src/od.c: Include stdckdint.h.
(bytes_to_oct_digits, bytes_to_signed_dec_digits)
(bytes_to_unsigned_dec_digits, bytes_to_hex_digits):
Use ‘char’ for these small constants.
(simple_strtoi): Rename from simple_strtoul. Convert to int
instead of unsigned long; that’s good enough. All uses changed.
Simplify by using ckd_mul and ckd_add to check for overflow.
(main): Prefer signed types to unsigned.
* src/cksum.c (main):
* src/df.c (decode_output_arg):
* src/digest.c (valid_digits):
Prefer idx_t to unsigned types when the value is an index
into an array.
When it’s easy, prefer signed types to unsigned, as
they are less confusing and allow overflow checking.
* src/factor.c (struct mp_factors, udiv_qrnnd)
(count_leading_zeros, count_trailing_zeros)
(factor_insert_multiplicity, mp_factor_clear, mp_factor_insert)
(factor_insert_refind, factor_using_division)
(mp_factor_using_division, powm2, millerrabin, millerrabin2)
(mp_millerrabin, prime_p, prime2_p, mp_prime_p, isqrt, isqrt2)
(invtab, q_freq, factor_using_squfof, strto2uintmax)
(print_factors_single, main):
Prefer signed integers to unsigned.
Change stzncpy’s implementation to match its comment, in the case
where SRC + LEN would overflow. This case never happens in coreutils.
* src/system.h (stzncpy): Work even if SRC + LEN would overflow.
This can be reproduced by getting the read() above 2G,
which induces a short read, thus triggering the erroneous failure.
$ truncate -s 5G 5G
$ cat 5G | TMPDIR=$PWD tac | wc -c
tac: /tmp/tacFt7txA: read error: Illegal seek
0
With the fix in place we now get:
$ cat 5G | TMPDIR=$PWD src/tac | wc -c
5368709120
* src/tac.c (tac_seekable): Use full_read() to handle short reads.
* NEWS: Mention the bug fix.
Reported at https://bugs.debian.org/1042546
Problem reported by Nir Oren <https://bugs.gnu.org/64785>.
* src/copy.c (copy_internal): Use a more-specific diagnostic when
a rename fails due to a problem that must be due to the
destination, avoiding user confusion in cases like 'mv dir x'
where x is a nonempty directory.
* tests/mv/dir2dir.sh: Adjust to match.
tail -n/-c +NUM, is different from tail -n/-c NUM,
and head -n/-c NUM, and head -n/c -NUM, in that it
specifies a 1 based index rather than a count to skip/include.
So clarify this in tail --help and tail info manual.
Note we also mention this gotcha at:
https://www.pixelbeat.org/docs/coreutils-gotchas.html#tail
* doc/coreutils.texi (tail invocation): Give examples for -c/-n +NUM,
to make it clear one has to specify a number 1 larger than
might be expected.
* src/tail.c (usage): State the skip at start edge case more clearly
in the -n description. -c is not often used with tail so we leave
full explanation of that to the info manual. Also split the string
to simplify translation.
* bootstrap.conf: Depend on tmpdir rather than tmpfile,
as the standard tmpfile() doesn't honor $TMPDIR.
* src/split.c (copy_to_tmpfile): Adjust to call temp_stream() rather
than tmpfile();
* NEWS: Mention the improvement.
This also refactors temp_stream() to its own module,
in preparation for use by split.
* src/tac.c: Refactor temp_stream() out to ...
* src/temp-stream.c: ... A new module mostly refactored from tac,
but uses tmpdir to more robustly support $TMPDIR,
while falling back to /tmp if not available.
* src/temp-stream.h: The new module interface.
* src/local.mk: Reference the new module from tac.
* tests/tac/tac.pl: Adjust to non failing missing $TMPDIR.
* po/POTFILES.in: Reference the new module with translatable strings.
* NEWS: Mention the user visible improvements to tac TMPDIR handling.
* src/join.c (prjoin): Check for write errors after each line.
* tests/misc/write-errors.sh: enable the test for join.
* NEWS: Mention the improvement.
* src/comm.c (writeline): Simplify by removing the unneeded STREAM
parameter. Call write_error() upon ferror().
(compare_files): Adjust to simplified writeline().
* tests/misc/write-errors.sh: Enable comm test.
* NEWS: Mention the improvement.
* src/cut.c (cut_bytes): Diagnose errors from fwrite() and putchar().
(cut_fields): Likewise.
* tests/misc/write-errors.sh: Enable the test for cut,
and augment to cover both cut_bytes() and cut_fields().
* NEWS: Mention the improvement.
* src/uniq.c (write_line): Check the output from fwrite() immediately.
(check_file): Likewise.
* tests/misc/write-errors.sh: Enable the test case.
* NEWS: Mention the improvement.
* src/od.c (dump): Check for write errors after each block written,
to exit early even with large / unbounded inputs.
* tests/misc/write-errors.sh: enable od check.
* NEWS: Mention the improvement.
Fixes https://bugs.gnu.org/64540
* cfg.mk (sc_some_programs_must_avoid_exit_failure): Adjust to
avoid false positive.
(sc_prohibit_exit_write_error): A new syntax check to prohibit
open coding error(..., "write error"); instead directing to use...
* src/system.h (write_error): ... a new function to clear stdout errors
before we explicitly diagnose a write error and exit.
* src/basenc.c: Use write_error() to ensure no repeated diagnostics.
* src/cat.c: Likewise.
* src/expand.c: Likewise.
* src/factor.c: Likewise.
* src/paste.c: Likewise.
* src/seq.c: Likewise.
* src/shuf.c: Likewise.
* src/split.c: Likewise.
* src/tail.c: Likewise.
* src/tr.c: Likewise.
* src/unexpand.c: Likewise.
* tests/misc/write-errors.sh: Remove TODOs for the fixed utilities:
expand, factor, paste, shuf, tr, unexpand.
* src/digest.c (problematic_chars): This recently introduced
function does not modify state so is pure, even though GCC 13.1 at least
did not warn about that attribute being appropriate.
* src/digest.c (digest_check): Also escape in the case that the
file name contains '\'.
* tests/cksum/md5sum-bsd.sh: Add a test case.
* doc/coreutils.texi (md5um invocation): Clarify escaping operation.
* NEWS: Mention the bug fix.
Fixes https://bugs.gnu.org/64392