* tests/misc/numfmt.pl: Verify that printf field width specs
count characters and not bytes before enabling locale tests.
This was seen on FreeBSD 14.0 and Solaris 11 OpenIndiana.
Reported by Bruno Haible
* tests/misc/numfmt.pl: Some systems with the fr_FR.UTF-8
locale installed, do not have a thousands grouping character defined.
In this case we skip the locale tests which depend on a non empty
grouping character.
Update to latest gnulib with new copyright year.
Run "make update-copyright" and then...
* gnulib: Update included in this commit as copyright years
are the only change from the previous gnulib commit.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Manually update copyright year,
until we fully sync with gnulib at a later stage.
* tests/sample-test: Adjust to use the single most recent year.
* tests/misc/numfmt.pl: Following on from v9.4-86-g615167cc4,
adjust this test accordingly. This test was being skipped
on some systems, and so only noticed now.
Reported by Jim Meyering.
* tests/misc/numfmt.pl: Determine the thousands grouping character
in use, rather than skipping locale tests when it's not a space.
For example fr_FR.UTF-8 uses "NARROW NO-BREAK SPACE" as the grouping
char on modern glibc systems at least.
* tests/sort/sort-h-thousands-sep.sh: Likewise.
For consistency with the "SI" standard, and with other coreutils
which output a lowercase 'k' in "SI" mode.
* src/numfmt.c (suffix_power): Treat 'k' like 'K' on input.
(double_to_human): Output lowercase 'k' in SI mode.
(usage): Adjust accordingly.
* doc/coreutils.texi: Mention 'k' accepted, and printed in SI mode.
* tests/misc/numfmt.pl: Adjust accordingly.
* NEWS: Mention the change in behavior.
Fixes https://bugs.gnu.org/47103
This simplifies memory allocation a bit, and removes an arbitrary
limitation from numfmt, which formerly limited cell output to 127
bytes.
* bootstrap.conf (gnulib_modules): Remove mbsalign, strncat.
Add strnlen (the code already used strnlen directly, and we were
saved only because Gnulib used the module indirectly)
* gl/lib/mbsalign.c, gl/lib/mbsalign.h, gl/modules/mbsalign:
* gl/modules/mbsalign-tests, gl/tests/test-mbsalign.c: Remove.
* src/df.c, src/ls.c: Do not include mbsalign.h.
(MBSWIDTH_FLAGS): New constant, now used for all
mbswidth calls. All callers changed to check for -1 return.
* src/df.c (struct field_data_t): ‘width’ is now int not size_t,
since mbswidth can’t do widths greater than INT_MAX anyway.
Replace ‘align’ with ‘align_right’. All uses changed.
(print_table): Redo to avoid the need for ambsalign.
(get_header, get_dev): mbswidth returns int, not size_t.
* src/ls.c (MAX_MON_WIDTH): Remove; no longer used.
(abmon_init): Use strnlen to cheaply discard too-long month names.
Align by hand instead of using mbsalign.
* src/numfmt.c: Include stdckdint.h, mbswidth.h.
Do not include mbsalign.h.
(padding_buffer_size): Now idx_t. All uses changed.
(padding_width): Now intmax_t, since it’s no longer an object
size. Its sign now records alignment. All uses changed.
(zero_padding_width): Now int, since it’s given to sprintf.
All uses changed.
(padding_alignment): Remove; it’s now taken from padding_width’s sign.
(double_to_human): Return string length. BUF_SIZE arg is now idx_t.
Include suffix in output. All callers changed. Simplify by not
calling strncat or stpcpy. Calculate fmt size bound more carefully.
(setup_padding_buffer): Remove. All uses removed.
(parse_format_string): Use intmax_t, not long, for pad.
On overflow, set widths to large values that cause later code
to do the right thing, rather than separately checking for
overflow here.
(prepare_padded_number): Return bool, not int 0/1. New arg
PADDING. All uses changed. Do not limit padded output to 127
bytes; instead, use xpalloc to expand the output buffer.
(print_padded_number): New arg PADDING. All uses changed.
(process_suffixed_number): Simplify.
(main): Take extremum if xstrtoimax overflows, as this does
the right thing.
* tests/misc/numfmt.pl: New test suf-20 to test for truncation bug.
Remove tests pad-3.2, fmt-err-7, as they’re no longer invalid but
are quite expensive.
* src/dd.c (parse_integer): Support Q,R suffixes.
* src/od.c (main): Likewise.
* src/split.c (main): Likewise.
* src/stdbuf.c (parse_size): Likewise.
* src/truncate.c (main): Likewise.
* src/sort.c (specify_size_size): Likewise.
Also line length syntax check fix.
* tests/misc/numfmt.pl: Adust top end large number checks
to the new largest values.
* doc/coreutils.texi (numfmt invocation): Add a numfmt example.
* NEWS: Tweak to aid searchability.
* src/dd, src/head.c, src/od.c, src/sort.c, src/stdbuf.c, src/tail.c:
(usage):
* src/system.h (emit_size_note):
Mention new SI prefixes.
* src/du.c (main):
* src/head.c (head_file):
* src/numfmt.c (suffix_power, suffix_power_char, prepare_padded_number):
* src/shred.c (main):
* src/sort.c (unit_order):
* src/tail.c (parse_options):
Support new SI prefixes.
* src/numfmt.c (MAX_ACCEPTABLE_DIGITS): Increase to 33.
(zero_and_valid_suffixes, valid_suffixes): New constants,
with new SI prefixes.
(valid_suffix, unit_to_umax): Use them.
(prepare_padded_number): Diagnose "999Q" instead of "999Y".
* tests/misc/numfmt.pl, tests/misc/sort.pl:
Adjust tests to match new max.
Update to latest gnulib with new copyright year.
Run "make update-copyright" and then...
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Manually update copyright year,
until we fully sync with gnulib at a later stage.
* tests/sample-test: Adjust to use the single most recent year.
Run "make update-copyright" and then...
* gnulib: Update to latest with copyright year adjusted.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
* tests/sample-test: Adjust to use the single most recent year.
Run "make update-copyright" and then...
* gnulib: Update to latest with copyright year adjusted.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
* tests/sample-test: Adjust to use the single most recent year.
Since -LONG_MIN results in LONG_MIN again, the operation itself is
a signed integer overflow.
This can be observed with the following calls (best if compiled
with -ftrapv or -fsanitize=undefined):
$ numfmt --padding=-9223372036854775808
$ seq 1e-9223372036854775808
Technically, the change in seq "reduces" the precision, but a double
or long double that small would be represented as 0 anyway.
* src/numfmt.c: Explicitly disallow --padding=LONG_MIN.
* src/seq.c: Treat 1e$LONG_MIN as 1e-$LONG_MAX.
* tests/misc/numfmt.pl: Add a test case.
* tests/misc/seq-precision.sh: Likewise.
Fixes https://bugs.gnu.org/41850
Run "make update-copyright" and then...
* gnulib: Update to latest with copyright year adjusted.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
* tests/sample-test: Adjust to use the single most recent year.
Run "make update-copyright" and then...
* gnulib: Update to latest with copyright year adjusted.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
* tests/sample-test: Adjust to use the single most recent year.
Increase max range from SIZE_MAX to UINTMAX_MAX, which will
allow cut to support line lengths up to the max file size
on all systems. The inherent SIZE_MAX limitation in cut was
removed with the enhancements in https://bugs.gnu.org/13127.
Also numfmt gets similarly increased --field ranges due to
shared code.
* src/cut.c: s/size_t/uintmax_t/.
* src/numfmt.c: Likewise.
* src/set-fields.c: Likewise.
* src/set-fields.h: Likewise.
* tests/misc/cut-huge-range.sh: Adjust accordingly.
* tests/misc/numfmt.pl: Likewise.
* NEWS: Mention the improvement.
Run "make update-copyright" and then...
* gnulib: Update to latest with copyright year adjusted.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
* tests/sample-test: Adjust to use the single most recent year.
Run "make update-copyright" and then...
* gnulib: Update to latest with copyright year adjusted.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
* tests/sample-test: Adjust to use the single most recent year.
* doc/coreutils.texi (numfmt invocation): Reference the description.
* src/numfmt.c: Parameterize '\n' references.
* tests/misc/numfmt.pl: Add tests for character and field processing.
* NEWS: Mention the new feature.
Run "make update-copyright" and then...
* gnulib: Update to latest with copyright year adjusted.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
* tests/sample-test: Adjust to use the single most recent year.
numfmt --field=LIST can accept the same options as cut.
* bootstrap.conf: remove xlist, linked-list
* src/local.mk: link numfmt with set-fields
* src/numfmt.c: use set-fields.c instead of custom field parsing code.
(include_field): adapt to new code.
* tests/misc/numfmt.pl: add new tests, adapt current tests to new
error message wording from set-fields.c
* src/numfmt.c (MAX_UNSCALED_DIGITS): Set this to LDBL_DIG
rather than hardcoding at 18 for better portability.
* tests/misc/numfmt.pl: Restrict limit tests to supported platforms.
* src/numfmt.c (simple_strtod_int): Don't count leading zeros
as significant digits. Also have leading zeros as optional
for floating point numbers.
* tests/misc/numfmt.pl: Add test cases.
* NEWS: Mention the fix.
Due to existing limits this is usually triggered
with an increased precision. We also add further
restrictions to the output of increased precision numbers.
* src/numfmt.c (simple_round): Avoid intmax_t overflow.
(simple_strtod_int): Count digits consistently
for precision loss and overflow detection.
(prepare_padded_number): Include the precision
when excluding numbers to output, since the precision
determines the ultimate values used in the rounding scheme
in double_to_human().
* tests/misc/numfmt.pl: Add previously failing test cases.
* NEWS: Mention the fix.
* src/numfmt.c (usage): Update the --format description
to indicate precision is allowed.
(parse_format_string): Parse a precision specification
like the standard printf does.
(double_to_human): Honor the precision in --to mode.
* tests/misc/numfmt.pl: New tests.
* doc/coreutils.texi (numfmt invocation): Mention the new feature.
* NEWS: Likewise.
* src/numfmt.c: Replace field handling code with logic that understands
field range specifiers. Instead of processing a single field and
printing line prefix/suffix around it, process each field in the line
checking whether it has been included for conversion. If so convert and
print, otherwise just print the unaltered field.
(extract_fields): Removed.
(skip_fields): Removed.
(process_line): Gutted and heavily reworked.
(process_suffixed_number): FIELD is now passed as an arg instead of
using a global.
(parse_field_arg): New function that parses field range specifiers.
(next_field): New function that returns pointers to the next field in
a line.
(process_field): New function that wraps the field conversion logic
(include_field): New function that checks whether a field should be
converted
(compare_field): New function used for field value comparisons in a
gl_list.
(free_field): New function used for freeing field values in a gl_list.
Global variable FIELD removed.
New global variable all_fields indicates whether all fields should be
processed.
New global variable all_fields_after stores the first field of a N-
style range.
New global variable all_fields_before stores the last field of a -M
style range.
New global variable field_list stores explicitly specified fields to
process (N N,M or N-M style specifiers).
(usage): Document newly supported field range specifiers.
* bootstrap.conf: Include xlist and linked-list modules. numfmt now
uses the gl_linked_list implementation to store the field ranges.
* tests/misc/numfmt.pl: Add tests for 'cut style' field ranges.
Adjust existing tests as partial output can occur before an error
Remove test for the 'invalid' field -5.. this is now a valid range.
* gnulib: update to avoid compiler warnings in linked-list.
* NEWS: Mention the new feature.
* src/numfmt.c (unit_to_umax): Support SI (power of 10) suffixes
with the --from-unit and --to-unit options. Treat suffixes like
is done with --from=auto, which for example will change the meaning
of --to-unit=G to that of --to-unit=Gi. The suffix support was
previously undocumented and it's better to avoid the traditional
coreutils suffix handling in numfmt by default.
* doc/coreutils.texi: Document the new behavior. Also fix a typo
mentioning {from,to}=units=.
* tests/misc/numfmt.pl: Adjust accordingly.
* NEWS: Mention the change in behavior.
Run "make update-copyright" and then...
* tests/sample-test: Adjust to use the single most recent year.
* tests/du/bind-mount-dir-cycle-v2.sh: Fix case in copyright message,
so that year is updated automatically in future.
* src/numfmt.c (setup_padding_buffer): Simplify the code by not
explicitly dealing with heap exhaustion.
(parse_format_string): Likewise. Handle multiple grouping
modifiers as does the standard printf. Handle the new leading
zero --format modifier.
(double_to_human): Use more defensive coding against overwriting
stack buffers. Honor the leading zeros width.
(usage): Mention the leading zero --format modifier.
(main): Allow --padding in combo with a --format (width),
as the number of leading zeros are useful independent of
the main field width.
* doc/coreutils.texi (numfmt invocation): Likewise.
* tests/misc/numfmt.pl: Add new test cases.
* NEWS: Mention the improvement.
Run "make update-copyright", but then also run this,
perl -pi -e 's/2\d\d\d-//' tests/sample-test
to make that one script use the single most recent year number.
Run "make update-copyright".
* src/numfmt.c: Update copyright year number range. This file has
obviously been added to coreutils after and without the annual update.
* tests/misc/numfmt.pl: Likewise.
Some newer test scripts - partially ones from me - are not executable.
It does not seem to be a problem, but for consistency and to avoid
future problems on unusual platforms or shells change the permissions
by adding the executable bit.
* cfg.mk (sc_tests_executable): Add new syntax-check rule to ensure
that all test scripts are executable.
* tests/df/df-output.sh: Change file mode from 644 to 755.
* tests/du/threshold.sh: Likewise.
* tests/factor/run.sh: Likewise.
* tests/init.sh: Likewise.
* tests/misc/csplit-suppress-matched.pl: Likewise.
* tests/misc/numfmt.pl: Likewise.
* tests/tail-2/retry.sh: Likewise.
Both factor and numfmt recently introduced debug messages
for developers, enabled by --verbose and ---devdebug respectively.
There were a few issues though:
1. They used different mechanisms to enable these messages.
2. factor used --verbose which might be needed for something else
3. They used different methods to output the messages,
and numfmt used error() which added an unwanted newline
4. numfmt marked all these messages for translation and factor
marked a couple. We really don't need these translated.
So we fix the above issues here while renaming the enabling
option for both commands to ---debug (still undocumented).
* src/factor.c (verbose): Rename to dev_debug and change from int to
bool as it's just a toggle flag.
(long_options): Rename --verbose to ---debug.
* src/system.h (devmsg): A new inline function to output a message
if enabled by a global dev_debug variable in the compilation unit.
* src/numfmt.c: Use devmsg() rather than error().
Also remove the translation tags from these messages.
Also change debug flag to bool from int.
* tests/misc/numfmt.pl: Adjust for the ---devdebug to ---debug change.
* cfg.mk (sc_marked_devdiagnostics): Add a syntax check to ensure
translations are not added to devmsg calls.
Reported by Göran Uddeborg in http://bugs.gnu.org/13665
* tests/misc/numfmt.pl: When the system locale grouping doesn't
match our expected format for grouping 1234 in the fr_FR locale,
reset the locale to 'C' so as to skip all locale tests.
* AUTHORS: Add my name.
* NEWS: Mention the new program.
* README: Reference the new program.
* src/numfmt.c: New file.
* src/.gitignore: Ignore the new binary.
* build-aux/gen-lists-of-programs.sh: Update.
* scripts/git-hooks/commit-msg: Allow numfmt: commit prefix.
* po/POTFILES.in: Add new c file.
* tests/misc/numfmt.pl: A new test file giving >93% coverage.
* tests/local.mk: Reference the new test.
* man/.gitignore: Ignore the new man page.
* man/local.mk: Reference the new man page.
* man/numfmt.x: A new template.
* doc/coreutils.texi: Document the new command.