* src/tail.c (check_output_alive): Use poll() on Solaris.
Also handle POLLHUP, which Solaris returns in this case.
* tests/tail-2/pipe-f.sh: Use `head -n2` rather than `sed 2q`
as Solaris sed does not exit in this case.
* NEWS: Mention the improvement.
Reported by Bruno Haible.
* src/system.h (target_directory_operand): Also check with stat()
on systems with O_SEARCH, to avoid open("file", O_SEARCH|O_DIRECTORY)
returning EACCES rather than ENOTDIR, which was seen on Solaris 11.4
when operating on non dirs without execute bit set.
* NEWS: Remove related bug entry, as that issue was only introduced
after coreutils v9.0 was released.
Reported by Bruno Haible.
commit v9.0-66-ge2daa8f79 introduced an issue, for example
where cp could hang when overwriting a destination fifo,
when it would try to open() the fifo on systems
like Solaris 10 that didn't support the O_DIRECTORY flag.
This is still racy on such systems, but only in the
case where a directory is replaced by a fifo in
the small window between stat() and open().
* src/system.h (target_directory_operand): On systems without
O_DIRECTORY, ensure the file is a directory before attempting to open().
* tests/cp/special-f.sh: Protect cp with timeout(1),
as cp was seen to hang when trying to overwrite an existing fifo.
* NEWS: Mention the bug fix.
Lookup of file-based capabilities adds 30% overhead to the common
case of ls --color usage. Since the use of file capabilities is
very rare, it doesn't make sense to pay this cost in the common
case. It's better to use getcap to inspect capabilities, and the
following run shows only 8 files using capabilities on my fedora
35 distro (14 years after the feature was introduced to the linux
kernel).
$ getcap -r /
/usr/bin/arping = cap_net_raw+p
/usr/bin/clockdiff = cap_net_raw+p
/usr/bin/gnome-keyring-daemon = cap_ipc_lock+ep
/usr/bin/gnome-shell = cap_sys_nice+ep
/usr/bin/newgidmap = cap_setgid+ep
/usr/bin/newuidmap = cap_setuid+ep
/usr/sbin/mtr-packet = cap_net_raw+ep
/usr/sbin/suexec = cap_setgid,cap_setuid+ep
* src/dircolors.hin: Set "CAPABILITY" to "00", to indicate unused.
* src/ls.c: Set the default C_CAP color to not colored.
* NEWS: Mention the change in behavior.
* src/printf.c (STRTOX): Update to support multi-byte chars.
* tests/misc/printf-mb.sh: Add a new test.
* tests/local.mk: Reference the new test.
* NEWS: Mention the improvement.
Fixes https://bugs.gnu.org/54388
Revert to the default behavior before the introduction of statx().
* src/stat.c (do_stat): Set AT_NO_AUTOMOUNT without --cached=never.
* doc/coreutils.texi (stat invocation): Mention the automount
behavior with --cached=never.
* NEWS: Mention the change in behavior.
Fixes https://bugs.gnu.org/54287
statx() has different defaults wrt automounting
compared to stat() or lstat(), so explicitly
set the AT_NO_AUTOMOUNT flag to suppress that behavior,
and avoid unintended operations or potential errors.
* src/ls.c (do_statx): Pass AT_NO_AUTOMOUNT to avoid this behavior.
* NEWS: Mention the change in behavior.
Fixes https://bugs.gnu.org/54286
Signed-off-by: Rohan Sable <rsable@redhat.com>
On macOS, isspace(0x85) returns true,
which results in splitting within multi-byte characters.
* src/fmt.c (get_line): s/isspace/c_isspace/.
* tests/fmt/non-space.sh: Add a new test.
* tests/local.mk: Reference new test.
* NEWS: Mention the fix.
Addresses https://bugs.gnu.org/54124
This implements my suggestion in Bug#54112.
* src/dd.c (usage): Document the change.
(parse_integer, scanargs): Implement the change.
Omit some now-obsolete checks for invalid flags.
* tests/dd/bytes.sh: Test the new behavior, while retaining
checks for the now-obsolete usage.
* tests/dd/nocache_eof.sh: Avoid now-obsolete usage.
Alias iseek=N to skip=N, oseek=N to seek=N (Bug#45648).
* src/dd.c (scanargs): Parse iseek= and oseek=.
* tests/dd/skip-seek.pl (sk-seek5): New test case.
COLORTERM is an environment used usually to expose truecolor support in
terminal emulators. Therefore support matches on that in addition
to TERM. Also set the default COLORTERM match pattern so that
we apply colors if COLORTERM is any value.
This implicitly supports a terminal like "foot"
without a need for an explicit TERM entry.
* NEWS: Mention the new feature.
* src/dircolors.c (main): Match COLORTERM like we do for TERM.
* src/dircolors.hin: Add default config to match any COLORTERM.
* tests/misc/dircolors.pl: Add test cases.
* NEWS: Mention the new feature.
* doc/coreutils.texi (dircolors invocation): Describe the new
--print-ls-colors option.
* src/dircolors.c (print_ls_colors): A new global to select
between shell or terminal output.
(append_entry): A new function refactored from dc_parse_stream()
to append the entry in the appropriate format.
(dc_parse_stream): Adjust to call append_entry().
* tests/misc/dircolors.pl: Add test cases.
This also affects ls -v in some corner cases.
Problems reported by Michael Debertol <https://bugs.gnu.org/49239>.
While looking into this, I spotted some more areas where the
code and documentation did not agree, or where the documentation
was unclear. In some cases I changed the code; in others
the documentation. I hope things are nailed down better now.
* doc/sort-version.texi: Distinguish more carefully between
characters and bytes. Say that non-identical strings can
compare equal, since they now can. Improve readability in
various ways. Make it clearer that a suffix can be the
entire string.
* src/ls.c (cmp_version): Fall back on strcmp if filevercmp
reports equality, since filevercmp is no longer a total order.
* src/sort.c (keycompare): Use filenvercmp, to treat NULs correctly.
* tests/misc/ls-misc.pl (v_files):
Adjust test to match new behavior.
* tests/misc/sort-version.sh: Add tests for stability,
and for sorting with NUL bytes.
Problem reported by Vladimir D. Seleznev (Bug#53631).
* src/id.c (main): Do not canonicalize user name before
deciding what groups the user belongs to.
When the destination for mv is a directory, use functions like openat
to access the destination files, when such functions are available.
This should be more efficient and should avoid some race conditions.
Likewise for 'install'.
* src/cp.c (must_be_working_directory, target_directory_operand)
(target_dirfd_valid): Move from here ...
* src/system.h: ... to here, so that install and mv can use them.
Make them inline so GCC doesn’t complain.
* src/install.c (lchown) [HAVE_LCHOWN]: Remove; no longer needed.
(need_copy, copy_file, change_attributes, change_timestamps)
(install_file_in_file, install_file_in_dir):
New args for directory-relative names. All uses changed.
Continue to pass full names as needed, for diagnostics and for
lower-level functions that do not support directory-relative names.
(install_file_in_dir): Update *TARGET_DIRFD as needed.
(main): Handle target-directory in the new, cp-like way.
* src/mv.c (remove_trailing_slashes): Remove static var; now local.
(do_move): New args for directory-relative names. All uses changed.
Continue to pass full names as needed, for diagnostics and for
lower-level functions that do not support directory-relative names.
(movefile): Remove; no longer needed.
(main): Handle target-directory in the new, cp-like way.
* tests/install/basic-1.sh:
* tests/mv/diag.sh: Adjust to match new diagnostic wording.
Problem reported by Sworddragon (Bug#51345).
* src/dd.c (cleanup): Synchronize output unless dd has been interrupted.
(synchronize_output): New function, split out from dd_copy.
Update conversions_mask so synchronization is done at most once.
(main): Do not die with the output file open, since we want to be
able to synchronize it before exiting. Synchronize output before
exiting.
Problem reported by Sworddragon (Bug#51482).
* src/dd.c (reported_w_bytes): New var.
(print_xfer_stats): Set it.
(dd_copy): Print a final progress report if useful before
synchronizing output data.
When copying to a directory, use functions like openat to access
the destination files, when such functions are available. This
should be more efficient and should avoid some race conditions.
* bootstrap.conf (gnulib_modules): Add areadlinkat-with-size,
fchmodat, fchownat, mkdirat, mkfifoat, utimensat.
* src/copy.c (lchown) [!HAVE_LCHOWN]:
* src/copy.c, src/system.h (rpl_mkfifo, mkfifo) [!HAVE_MKFIFO]:
Remove. All uses removed.
(utimens_symlink): Remove; we shouldn’t have to worry about
those obsolete systems any more. All uses replaced by utimensat.
* src/copy.c (copy_dir, set_owner, fchmod_or_lchmod, copy_reg)
(same_file_ok, writable_destination, overwrite_ok, abandon_move)
(create_hard_link, src_is_dst_backup, copy_internal, copy):
* src/cp.c (make_dir_parents_private, re_protect):
New args for directory-relative names. All uses changed.
Continue to pass full names as needed, for diagnostics and for
lower-level functions like qset_acl that do not support
directory-relative names.
* src/copy.c (copy_reg): Prefer readlinkat to lstatat for merely
checking whether a file is a symlink, to avoid EOVERFLOW issues.
(subst_suffix): New function.
(create_hard_link): Accept a null SRC_NAME as meaning that if it
is needed it needs to be constructed from SRC_RELNAME, DST_NAME,
and DST_RELNAME.
(source_is_dst_backup): Use subst_suffix instead of doing it by hand.
(copy_internal): Remember and use directory-relative names instead
of full names.
* src/cp.c (lchown) [!HAVE_LCHOWN]: Remove. All uses removed.
(must_be_working_directory): New function.
(target_directory_operand): Simply take file name as arg,
and return a file descriptor or negative number on failure;
open with O_DIRECTORY to obtain any file descriptor.
All uses changed.
(target_dirfd_valid): New function.
(do_copy): Use these new functions to obtain a file descriptor
for any target directory, and use directory-relative names
for that directory.
(main): Omit no-longer-needed stat when --target-directory,
as do_copy now does this.
* src/ln.c (O_PATHSEARCH): Move from here ...
* src/system.h: ... to here.
* tests/cp/fail-perm.sh: Adjust to change in diagnostic wording,
and add a test for --no-target-directory.
Run "make update-copyright" and then...
* gnulib: Update to latest with copyright year adjusted.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
* tests/sample-test: Adjust to use the single most recent year.
* NEWS, doc/coreutils.texi (Options for date): Mention this.
* src/date.c (RESOLUTION_OPTION): New constant.
(DEBUG_DATE_PARSING_OPTION): Rename from DEBUG_DATE_PARSING.
All uses changed.
(long_options, usage, main): Support --resolution.
* NEWS, doc/coreutils.texi: Mention this.
* bootstrap.conf (gnulib_modules): Add gettime-res.
* src/date.c (res_width, adjust_resolution): New functions.
(main): Adjust %-N to be %9N, or whatever, before using it.
This fixes a porting bug introduced in
2019-08-12T03:29:00Z!bruno@clisp.org.
Problem discovered on AIX 7.1.
* src/local.mk (LDADD): Add $(LIB_MBRTOWC), since pretty much
every command uses quotearg or mbrtowc or whatever.
(src_sort_LDADD): Add $(LIBPMULTITHREAD) and
$(LIB_PTHREAD_SIGMASK) instead of $(LIBTHREAD).
When configured with --enable-single-binary tools issue incorrect prctl:
prctl(PR_SET_KEEPCAPS, ...) = -1 EINVAL (Invalid argument)
PR_SET_MM_ARG_START is not a prctl 'option' parameter, it's 'arg2'
parameter for the option PR_SET_MM. It also has to have 'arg4' and
'arg5' set to 0 explicitly, otherwise the kernel also returns -EINVAL.
* src/coreutils.c (launch_program): Fix prctl arguments.
* NEWS: Mention the improvement.
Fixes https://bugs.gnu.org/52800
Living so close to Hollywood I know that "colorize"
means adding color to something that was already monochrome,
whereas "color" means to give color to something.
Coreutils apps color text instead of colorizing it.
* configure.ac: Check for fclonefileat.
* src/copy.c [HAVE_FCLONEFILEAT && !USE_XATTR]:
Include <sys/clonefile.h>.
(copy_reg): If possible, use fclonefileat to clone.
This fixes a bug that I introduced in
2006-12-06T19:44:08Z!eggert@cs.ucla.edu.
* src/copy.c (USE_XATTR): New macro.
(copy_reg): Use it to help the compiler. Prefer open u+w to a
later chmod u=rw; u+r isn’t needed for xattr. For the later u-r,
do only one (or zero) chmod calls instead of two (or one).
In the last chmod, respect the umask instead of ignoring it.
* tests/cp/preserve-mode.sh: Test for the bug.
This fixes an issue introduced in the fix for Bug#11100.
* NEWS: Mention this.
* src/copy.c (copy_reg): Fix obscure bug where open-without-CREAT
failed with ENOENT and we forget to call set_process_security_ctx
before calling open-with-CREAT. Also, don’t bother to unlink
DST_NAME if open failed with ENOENT; and if unlink fails with
ENOENT, don’t consider that to be an error (someone else could
have removed the file for us, and that’s OK). Also, don’t worry
about move mode, since we use O_EXCL|O_CREAT and so won’t open
an existing file.
New warnings are added related to the handling
of thousands grouping characters, decimal points, and sign characters.
Examples now diagnosed are:
$ printf '0,9\n1,a\n' | sort -nk1 --debug -t, -s
sort: key 1 is numeric and spans multiple fields
sort: field separator ‘,’ is treated as a group separator in numbers
1,a
_
0,9
___
$ printf '1,a\n0,9\n' | LC_ALL=fr_FR.utf8 sort -gk1 --debug -t, -s
sort: key 1 is numeric and spans multiple fields
sort: field separator ‘,’ is treated as a decimal point in numbers
0,9
___
1,a
__
$ printf '1.0\n0.9\n' | LC_ALL=fr_FR.utf8 sort -s -k1,1g --debug
sort: note numbers use ‘,’ as a decimal point in this locale
0.9
_
1.0
_
$ LC_ALL=fr_FR.utf8 sort -n --debug /dev/null
sort: text ordering performed using ‘fr_FR.utf8’ sorting rules
sort: note numbers use ‘,’ as a decimal point in this locale
sort: the multi-byte number group separator in this locale \
is not supported
$ sort --debug -t- -k1n /dev/null
sort: key 1 is numeric and spans multiple fields
sort: field separator ‘-’ is treated as a minus sign in numbers
sort: note numbers use ‘.’ as a decimal point in this locale
$ sort --debug -t+ -k1g /dev/null
sort: key 1 is numeric and spans multiple fields
sort: field separator ‘+’ is treated as a plus sign in numbers
sort: note numbers use ‘.’ as a decimal point in this locale
* src/sort.c (key_warnings): Add the warnings above.
* tests/misc/sort-debug-warn.sh: Add test cases.
Also check that all sort invocations succeed.
* NEWS: Mention the improvement.
Addresses https://bugs.gnu.org/51011
* src/timeout.c (main): Propagate the killed status from the child.
* doc/coreutils.texi (timeout invocation): Remove the
description of the --foreground specific handling of SIGKILL,
now that it's consistent with the default mode of operation.
* tests/misc/timeout.sh: Add a test case.
* NEWS: Mention the change in behavior.
Fixes https://bugs.gnu.org/51135
* src/chmod.c: Reorder enum so CH_NOT_APPLIED
can be treated as a non error.
* tests/chmod/ignore-symlink.sh: A new test.
* tests/local.mk: Reference the new test.
* NEWS: Mention the bug fix.
Fixes https://bugs.gnu.org/50784
Support checksum files with CRLF line endings,
which is a common gotcha for using --check on windows,
or with checksum files generated on windows.
Note we escape \r here to support the original coreutils format
(with file name at EOL), and file names with literal
\r characters as the last character of their name.
* src/digest.c (filename_unescape): Convert \\r -> \r.
(print_filename): Escape \r -> \\r.
(output_file): Detect \r chars in file names.
(digest_check): Ignore literal \r char at EOL.
* tests/misc/md5sum.pl: Add a test case.
* tests/misc/sha1sum.pl: Likewise.
* NEWS: Mention the improvement.
Support `cksum --check FILE` without having to specify a digest
algorithm, allowing for more generic file check instructions.
This also supports mixed digest checksum files, supporting
more robust multi digest checks.
* src/digest.c (algorithm_from_tag): A new function to
identify the digest algorithm from a tagged format line.
(split3): Set the algorithm depending on tag, and update
the expected digest length accordingly.
* tests/misc/cksum-c.sh: Add a new test.
* tests/local.mk: Reference the new test.
* tests/misc/md5sum.pl: Adjust to more generic error.
* tests/misc/sha1sum.pl: Likewise.
* doc/coreutils.texi (md5sum invocation): Mention the new -c feature.
* NEWS: Mention the new feature.
Add message digest sm3, which uses the OSCCA SM3 secure
hash (OSCCA GM/T 0004-2012 SM3) generic hash transformation.
* bootstrap.conf: Add the sm3 module.
* doc/coreutils.texi: Mention the cksum -a option.
* src/digest.c: Provide support for --algorithm='sm3'.
* tests/misc/sm3sum.pl: Add a new test (from Tianjia Zhang)
* tests/local.mk: Reference the new test.
* NEWS: Mention the new feature.
Tested-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
* src/digest.c: Organize HASH_ALGO_CKSUM to be table driven,
and amalgamate all digest algorithms.
(main): Parse all options if HASH_ALGO_CKSUM, and disallow
--tag, --zero, and --check with the traditional bsd, sysv, and crc
checksums for now.
* src/local.mk: Reorganize to include all digest modules in cksum.
* tests/misc/cksum-a.sh: Add a new test.
* tests/misc/b2sum.sh: Update to default to checking with cksum,
as b2sum's implementation diverges a bit from the others.
* tests/local.mk: Reference the new test.
* doc/coreutils.texi (cksum invocation): Adjust the summary to
identify the new mode, and document the new --algorithm option.
* man/cksum.x: Adjust description to be more general.
* man/*sum.x: Add [See Also] section referencing cksum(1).
* NEWS: Mention the new feature.
Adjust to output the file name if any name parameter is passed.
This is consistent with sum -s, cksum, and sum implementations
on other platforms. This should not cause significant compat
issues, as multiple fields are already output, and so already
need to be parsed.
* src/sum.c (bsd_sum_file): Output the file name
if any name parameter is passed.
* tests/misc/sum.pl: Adjust accordingly.
* doc/coreutils.texi (sum invocation): Likewise.
* NEWS: Mention the change in behavior.
Emil Lundberg <lundberg.emil@gmail.com> reports in
https://bugs.gnu.org/49741 about a 'basenc --base64 -d' decoding bug.
The input buffer length was not divisible by 3, resulting in
decoding errors.
* NEWS: Mention fix.
* src/basenc.c (DEC_BLOCKSIZE): Change from 1024*5 to 4200 (35*3*5*8)
which is divisible by 3,4,5,8 - satisfying both base32 and base64;
Use compile-time verify() macro to enforce the above.
* tests/misc/basenc.pl: Add test.
Problem reported by Michael Debertol (Bug#50070).
* NEWS: Mention the fix.
* src/chmod.c (struct change_status): New struct, replacing the
old enum Change_status. All uses changed.
(describe_change): Distinguish between cases depending on
whether 'stat' or its equivalent succeeded. Report a line
of output even if 'stat' failed, as that matches the documentation.
Rework to avoid casts.
(process_file): Do not output nonsense modes computed from
uninitialized storage, removing a couple of IF_LINTs. Simplify by
defaulting to CH_NO_STAT.
If the command-line argument is automounted, df would use
stat info that became wrong after the following open.
* NEWS: Mention the fix (bug#50012).
* src/df.c (automount_stat_err): New function.
This fixes the hang on fifos in a better way, by using O_NONBLOCK.
(main): Use it.