* tests/cp/proc-short-read.sh: Switch to using /proc/cpuinfo,
rather than /proc/kallsyms which was seen to vary in some cases.
Fixes https://bugs.gnu.org/39357
Run "make update-copyright" and then...
* gnulib: Update to latest with copyright year adjusted.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
* tests/sample-test: Adjust to use the single most recent year.
Run "make update-copyright" and then...
* gnulib: Update to latest with copyright year adjusted.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
* tests/sample-test: Adjust to use the single most recent year.
* tests/cp/cp-a-selinux.sh: Use 'skip_' rather than the probably
undefined 'skip'.
* tests/du/2g.sh: Likewise.
* tests/install/install-Z-selinux.sh: Likewise.
* tests/misc/chcon.sh: Likewise.
* tests/misc/selinux.sh: Likewise.
* tests/mkdir/restorecon.sh: Likewise.
* cfg.mk (sc_prohibit-skip): A new syntax check to catch the issue.
This mode is currently the default, but most if not all users of
reflink-capable filesystems want --reflink=auto, which is often
encapsulated into an alias. Adding --reflink=never allows overriding
such an alias.
* doc/coreutils.texi (cp invocation): Describe the new option.
* src/cp.c: Support --reflink=never.
* tests/cp/reflink-auto.sh: Add a test case.
* NEWS: Mention the new feature.
This issue was introduced in commit v8.19-145-g24ebca6
* src/copy.c (copy_internal): With --no-preserve=mode,
only reset permissions for newly created files.
(copy_reg): Likewise.
* NEWS: Mention the fix.
* tests/cp/preserve-mode.sh: Add a test case.
Fixes https://bugs.gnu.org/31675
* src/copy.c (copy_internal): Don't fail immediately upon
getting ELOOP when running stat() on the destination,
rather proceeding if -f specified, allowing the link
to be removed. If the loop is not in the final component
of the destination path, we still fail but at the
subsequent unlink() stage.
* doc/coreutils.texi (cp invocation): Adjust wording to say
that --force doesn't work with dangling links, rather than
all links that can't be traversed.
* tests/cp/thru-dangling.sh: Add a test case.
* NEWS: Mention the change in behavior.
Discussed in https://bugs.gnu.org/31335
Ensure this _does_ recreate the symlink
Given "path1" and "path2" are on different devices.
$ touch "path1/file"
$ cd path2/; ln -s path1/file
$ cp -dsf path1/file .
Ensure this does _not_ overwrite file
$ touch file
$ ln -s file l1
$ cp -sf l1 file
* src/copy.c (same_file_ok): Remove device ids from consideration,
instead deferring to future EXDEV with --link or allowing
the first case above to work.
Also ensure that we do not exist this function too early,
when the destination file is not a symlink, which protects
against the second case.
* tests/cp/cross-dev-symlink.sh: Add a test for the first case.
* tests/cp/same-file.sh: Add a test for the second case above.
* NEWS: Mention the bug fixes.
* THANKS.in: Mention the reporters who also analyzed the code.
Fixes https://bugs.gnu.org/31364
* src/cp.c (target_directory_operand): Allow through inaccessible
arguments with -f or --remove.
* doc/coreutils.texi (cp invocation): Clarify that -f doesn't directly
impact the removal of non-traversable symlinks.
* tests/cp/dir-rm-dest.sh: Test the new behavior.
* tests/cp/thru-dangling.sh: Enforce -f behavior wrt symlinks.
* NEWS: Mention the bug fix.
Fixes https://bugs.gnu.org/31335
This issue was introduced in commit v8.19-145-g24ebca6
* src/copy.c (copy_internal): When setting default permissions
to use with --no-preserve=mode, only set executable bits for
directories or sockets.
* NEWS: Mention the fix.
* tests/cp/preserve-mode.sh: Add a test case.
Fixes https://bugs.gnu.org/30534
Run "make update-copyright" and then...
* gnulib: Update to latest with copyright year adjusted.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
* tests/sample-test: Adjust to use the single most recent year.
* tests/cp/preserve-mode.sh: This was the only use of awk,
which may not be available on the system resulting
in an ineffective test. Also the permissions bits for
directories were not being checked at all.
On some setups the root:object_r:tmp_t context is invalid.
This does indicate a limitation in the test framework,
but for now we'll relax this to skipping the tests.
The tests still run on a Fedora 25 system for example.
* tests/cp/cp-a-selinux.sh: Upon chcon error, skip rather than ERROR.
* tests/install/install-Z-selinux.sh: Likewise.
* tests/misc/chcon.sh: Likewise.
* tests/misc/runcon-no-reorder.sh: Likewise.
* tests/misc/selinux.sh: Likewise.
* tests/mkdir/restorecon.sh: Likewise.
Suggested by Kamil Dudka in:
http://lists.gnu.org/archive/html/coreutils/2017-07/msg00072.html
* NEWS: Document the changed nature of the fix.
* doc/coreutils.texi, tests/cp/backup-is-src.sh:
* tests/mv/backup-is-src.sh: Revert previous change.
* src/copy.c (source_is_dst_backup): New function.
(copy_internal): Use it. Fail instead of falling back on numbered
backups when it looks like the backup will overwrite the source.
Although this reintroduces a race, it's more compatible with
previous behavior.
* NEWS, doc/coreutils.texi (Backup options): Document the change.
* bootstrap.conf (gnulib_modules): Add backup-rename.
* src/copy.c (copy_internal): Silently switch to numbered backups
if a simple backup might lose data. Use backup_file_rename
to avoid races with numbered backups.
* tests/cp/backup-is-src.sh, tests/mv/backup-is-src.sh:
Adjust to match new behavior.
* src/copy.c (set_process_security_ctx, set_file_security_ctx):
Export for use in cp.c.
* src/copy.h: Likewise.
* src/cp.c (make_dir_parents_private): Call the exported functions
to set the security context for new and updated directories.
* tests/cp/cp-a-selinux.sh: Add a test case.
Fixes http://bugs.gnu.org/25378
If the file B already exists, commands like 'ln -f A B' and
'cp -fl A B' no longer remove B before creating the new link.
Instead, they arrange for the new link to replace B atomically.
This should fix a race condition reported by Mike Crowe (Bug#25680).
* NEWS, doc/coreutils.texi (cp invocation, ln invocation):
Document this.
* bootstrap.conf (gnulib_modules): Add symlinkat.
* src/copy.c, src/ln.c: Include force-link.h.
* src/copy.c (same_file_ok): It's also OK to remove a destination
symlink when creating symbolic links, or when the source and
destination are on the same file system and when creating hard links.
* src/copy.c (create_hard_link, copy_internal):
* src/ln.c (do_link):
Rewrite using force_linkat and force_symlinkat, to close a window
where the destination temporarily does not exist.
* src/cp.c (main): Do not set x.unlink_dest_before_opening
merely because we are in link-creation mode.
* src/force-link.c, src/force-link.h: New files.
* src/local.mk (copy_sources, src_ln_SOURCES): Add them.
* tests/cp/same-file.sh: Adjust test case to match fixed behavior.
A lot of this is converting http: to https:.
Also, gmane went away, so remove URLs that no longer work and
are not easy to figure out what they were.
Some of this stuff is so old that it no longer matters anyway.
Run "make update-copyright" and then...
* gnulib: Update to latest with copyright year adjusted.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
* tests/sample-test: Adjust to use the single most recent year.
When running "make check" on a Linux system running SELinux with a
non-MLS policy, tests/mkdir/restorecon.sh test fails with:
chcon: invalid context: root:object_r:tmp_t:s0: Invalid argument
Indeed in such a configuration, contexts cannot have ":s0" suffix.
* init.cfg (get_selinux_type): Refactor this function to here
from various tests. Update to work with a non-MLS policy.
(mls_enabled_): A new function to detect if MLS is enabled.
(skip_if_mcstransd_is_running_): Update to not skip when
MLS is not enabled.
* tests/mkdir/restorecon.sh: Use a valid non-MLS context when needed.
* tests/install/install-Z-selinux.sh: Likewise.
* tests/cp/cp-a-selinux.sh: Likewise.
* tests/misc/selinux.sh: Likewise.
* tests/misc/chcon.sh: Skip if non-MLS as --range used throughout.
Fixes http://bugs.gnu.org/22631
* src/copy.h (cp_options): Add a new flag for install(1).
* src/copy.c (copy_internal): For cp, also output remediation
advice which also indicates why directories aren't copied by default.
The message is unchanged for install(1).
* src/cp.c (cp_option_init): Init install_mode to false.
* src/mv.c (cp_option_init): Likewise.
* src/install.c (cp_option_init): Init install_mode to true.
* tests/install/basic-1.sh: Add a test case.
* tests/cp/link-deref.sh: Adjust test case.
Fixes http://bugs.gnu.org/24958
* src/cp.c (make_dir_parents_private): Use default permissions for
created directories when --no-preserve=mode is specified.
* tests/cp/cp-parents.sh: Add a test case.
* NEWS: Mention the fix.
Fixes http://bugs.gnu.org/24251
* tests/cp/parent-perm-race.sh: This new race introduced in
commit v8.25-5-g632eda5 is quite hard to hit, but is due to
`ls > fifo` doing write()/close()/exit() once `cp` has
open() the source fifo. Then the subsequent comparison of the
destination file may fail due to the file being missing or empty.
Previously `ls` generated output that was independent of `cp`.
Now we must wait for `cp` to finish before inspecting the
destination file that it wrote.
* tests/cp/parent-perm-race.sh: Add timeouts so that the test does
not wait forever on GNU/Hurd. This does not fix the underlying
bug but at least lets the tests make progress.
Problem reported by Nelson H.F. Beebe in: http://bugs.gnu.org/22624
Also, check that 'cp' actually copies the data; this is a better
test anyway, and simplifies the test code.
Also, avoid unlikely race if 'pid' is set in the environment.
* tests/cp/preserve-slink-time.sh: Add a delay between the
ln and the cp so that there is enough difference between
the timestamps so GPFS won't discard the update.
Reported by Assaf Gordon.
* tests/cp/fiemap-extents.sh: Support RHEL6 fallocate
which doesn't support IEC suffixes like "MiB" on numbers.
Also add some extra framework_failure_ protections.
Reported by Assaf Gordon.
commit v8.23-31-g90aa291 failed to consider this case,
where the previous rename has failed, thus causing the
following to remove the specified directory:
mv dir dir dir
* src/copy.c (copy_internal): Assume this rename attempt has
succeeded, as a previous failure will already have been handled,
and we don't want to remove the source directory in this case.
* tests/cp/duplicate-sources.sh: Consolidate this test file to...
* tests/mv/dup-source.sh: ...here. Add test cases for same
source and dest.
* tests/local.mk: Remove the consolidated test.
* NEWS: Mention the bug fix.
Reported at https://bugzilla.redhat.com/1297464
Run "make update-copyright" and then...
* gnulib: Update to latest with copyright year adjusted.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
* tests/sample-test: Adjust to use the single most recent year.
fallocate can allocate extents beyond EOF via FALLOC_FL_KEEP_SIZE.
Where there is a gap (hole) between the extents, and EOF is within
that gap, the final hole wasn't reproduced, resulting in silent
data corruption in the copied file (size too small).
* src/copy.c (extent_copy): Ensure we don't process extents
beyond the apparent file size, since processing and allocating
those is not currently supported.
* tests/cp/fiemap-extents.sh: Renamed from tests/cp/fiemap-empty.sh
and re-enable parts checking the extents at and beyond EOF.
* tests/local.mk: Reference the renamed test.
* NEWS: Mention the bug fix.
Fixes http://bugs.gnu.org/21790
programs may not be built due to missing system dependencies,
or any program can be excluded at configure time with
--enable-no-install-program. So ensure we're not testing the
system versions in these cases.
* init.cfg (print_ver_): Call require_built_ first.
* tests/misc/tty-eof.pl: Skip programs not built.
* tests/Coreutils.pm (run_tests): Likewise.
* tests/misc/ls-misc.pl: Use 'env test' rather than abs path.
* tests/misc/test-diag.pl: Likewise.
* tests/local.mk: Adjust include order for dependencies.
* tests/misc/arch.sh: Remove redundant calls to require_built_.
* tests/misc/chroot-fail.sh: Likewise.
* tests/misc/groups-dash.sh: Likewise.
* tests/misc/groups-version.sh: Likewise.
* tests/misc/stdbuf.sh: Likewise.
* tests/cp/acl.sh: Remove problematic call to print_ver_ [gs]etfacl.
* tests/mv/acl.sh: Likewise.
* cfg.mk (sc_env_test_dependencies): A new syntax check to enforce
specifying dependencies with print_ver_ for programs
specified through the env command.
* du/bigtime.sh: Add new print_ver_ dependencies.
* du/max-depth.sh: Likewise.
* dd/ascii.sh: Likewise.
* tests/ls/capability.sh: Likewise.
* tests/ls/root-rel-symlink-color.sh: Likewise.
* tests/misc/chroot-fail.sh: Likewise.
* tests/misc/readlink-fp-loop.sh: Likewise.
* tests/misc/sort-debug-keys.sh: Likewise.
* tests/readlink/can-e.sh: Likewise.
* tests/readlink/can-f.sh: Likewise.
* tests/readlink/can-m.sh: Likewise.
* tests/tail-2/inotify-race.sh: Likewise.
* tests/tail-2/inotify-race2.sh: Likewise.
* tests/touch/no-create-missing.sh: Likewise.
* tests/touch/no-dereference.sh: Likewise.
* tests/misc/printenv.sh: Tweak to avoid syntax check trigger.
* tests/misc/help-version.sh: Likewise.
* tests/misc/yes.sh: Likewise.
* tests/misc/printf-quote.sh: Use previously unused $prog.
* configure.ac (EXTRA_MANS): Add $gl_no_install_prog to the list
so that check-x-vs-1 syntax check is satisfied.
To reproduce:
setfacl -dm group::rx .
setfacl -dm other::rx .
make check
* init.cfg (require_no_default_acl_): A new function to skip
when default ACLs are detected, or if the getfacl utility is
not available then skip if any non LSM ACLs detected.
* tests/cp/existing-perm-race.sh: Call require_no_default_acl_.
* tests/mkdir/parents.sh: Likewise.
* tests/mkdir/perm.sh: Likewise.
* tests/cp/cp-a-selinux.sh: Ensure we skip the portion of the test
depending on restorecon to be effective. I.E. also skip when restorecon
warns, as it doesn't exit with error status when matchpathcon fails to
find a match for a file. This is the case in /tmp on Fedora for
example, in which case the new destination that cp creates will have the
default security context of the process, rather than the explicit
context we set on the source file.
Details at: http://bugzilla.redhat.com/1247641
When configured with either 'symlinks' or 'shebangs' as value for
the --enable-single-binary option, tests based on `ulimit -v` are
skipped. The reason is that the multicall 'coreutils' binary requires
much more memory due to shared libraries being loaded, and the size of
the 'date' binary (~290KiB) compared to the multicall binary (~5MiB),
of course. Finally, in the case of 'shebangs', the starting shell
requires more memory, too
Instead of using hard-coded values for the memory limit, use an
adaptive approach: first determine the amount of memory for a similar,
yet more trivial invocation of the command, and then do the real test
run using that limit (plus some buffer in some cases).
* init.cfg (require_ulimit_v_): Remove function.
(get_min_ulimit_v_): Add function to determine the minimum memory limit
required for a given command in an adaptive way.
* cfg.mk (sc_prohibit_test_ulimit_without_require_): Change the name
of the above function in the syntax-check rule.
* tests/cp/link-heap.sh: Use the above function to determine the
minimum memory required to run a command simpler than in the real test
run. Use that limit plus a buffer there. While at it, change to list
of commands in the subshell to fail also if the beginning `ulimit -v`
fails.
* tests/dd/no-allocate.sh: Likewise.
* tests/misc/csplit-heap.sh: Likewise.
* tests/misc/cut-huge-range.sh: Likewise.
* tests/misc/head-c.sh: Likewise.
* tests/misc/printf-surprise.sh: Likewise.
* tests/split/line-bytes.sh: Likewise.
* tests/rm/many-dir-entries-vs-OOM.sh: Likewise - doing it separately
for each program under test.
The LD_PRELOAD checks by -fsanitize=address are overly strict:
https://groups.google.com/forum/#!topic/address-sanitizer/jEvOJgkDqQk
A workaround is to first export LD_PRELOAD=libasan.so.2
The tests below are adjusted so that workaround is not discarded.
* tests/cp/no-ctx.sh: Append to $LD_PRELOAD.
* tests/df/no-mtab-status.sh: Likewise.
* tests/df/skip-duplicates.sh: Likewise.
* tests/ls/getxattr-speedup.sh: Likewise.
* tests/rm/r-root.sh: Likewise.
* tests/cp/nfs-removal-race.sh: Likewise. Also check that
LD_PRELOAD is effective to aid future maintainability
and avoid false failure if libasan.so.2 is not preloaded.
* src/copy.c (CAN_HARDLINK_SYMLINKS): Don't enable use of linkat()
on Darwin 14, as the gnulib fallback emulation there doesn't
preserve ownership and timestamps etc. This fixes a test failure
in tests/cp/link-symlink.sh
* tests/cp/link-deref.sh: Adjust accordingly.
* tests/cp/no-ctx.sh: Scope of `var=val func` is inconsistent
across shells, so avoid that construct with functions.
* tests/df/no-mtab-status.sh: Likewise.
* tests/tail-2/inotify-race.sh: `read` needs an argument.
* tests/tail-2/inotify-race2.sh: Likewise.
* tests/dd/sparse.sh: Sync files before checking allocations,
which may be done asynchronously on NFS and BTRFS at least.
Also mark this test as very expensive on remote file systems.
* tests/du/2g.sh: Likewise, also use fallocate if available
to efficiently allocate the large file, otherwise skip
on remote file systems.
* tests/tail-2/inotify-rotate-resources.sh: Use the more
standard is_local_dir_() to check remoteness.
* tests/cp/fiemap-empty.sh: Comment on the sync issue
for this currerntly unused test.
Fixes http://bugs.gnu.org/20570
Many tests use `program ... && fail=1` to ensure expected
error situations are indicated. However that would mask
an unexpected exit (like a crash). Therefore explicitly
check the expected exit code.
Note where error messages are also verified, the extra
protection is not added.
* tests/init.sh (returns_): A new helper function to
check the return code of a command, and used
throughout the tests.
* cfg.mk (sc_prohibit_and_fail_1): Add a syntax check
to avoid new instances of this issue.
Run "make update-copyright" and then...
* tests/sample-test: Adjust to use the single most recent year.
* tests/du/bind-mount-dir-cycle-v2.sh: Fix case in copyright message,
so that year is updated automatically in future.