* src/shred.c (wipename): Quote the names of the source and destination
when printing verbose messages for rename. Remove comment about not
needing quoting after the first message, since we still do not control
the contents of any parent directories contained in the source or
destination.
* tests/shred/verbose-quote.sh: New file.
* tests/local.mk (all_tests): Add the new test case.
* NEWS: Mention the bug fix.
Discovered by Anthropic's OSS Scanner, as bug ANT-2026-3UJ1SMSY.
Similarly to commit v9.10-115-gb3fe24213, which applied
the same quoting mechanism to --check operation,
also quote file names when generating checksums to tty.
This change gives these advantages:
1. Avoids dumping arbitrary data to vulnerable terminals
2. Avoids visual deception with ansi codes with unknown file names
3. More secure if users copy and paste file names from output
* doc/coreutils.texi (sum invocation): Mention the tty quoting
and reference the details from ...
(cksum output modes): Describe the two forms of quoting used.
* tests/misc/tty-quoting.sh: Add test cases.
* NEWS: Mention the improvement.
Discovered by Anthropic's OSS Scanner, as bug ANT-2026-Z25BP6MW.
* src/chroot.c (main): Copy pwd->pw_name as it can be overwritten.
* NEWS: Mention the fix.
Discovered by Anthropic's OSS Scanner, as bug ANT-2026-C8RRA4R8.
* src/install.c (mkancesdirs_safe_wd): Save the current working
directory when using 'strip' on files.
* tests/install/strip-program.sh: Add two test cases.
* NEWS: Mention the bug fix.
Discovered by Anthropic's OSS Scanner, as bug ANT-2026-CBHGSM1T.
This fixes the following error message:
$ touch a; mv --exchange a b
mv: cannot exchange 'a' and 'b': Unknown error -1
Here is the error message after this commit:
$ touch a; ./src/mv --exchange a b
mv: cannot exchange 'a' and 'b': No such file or directory
* THANKS.in: Add Igor Giamoniano, who reported the bug.
* src/copy.c (copy_internal): Save the EEXIST errno when stat fails,
since renameat would fail for the same reason.
* tests/mv/mv-exchange.sh: Add a few test cases where the bug could be
seen.
* NEWS: Mention the bug fix.
Fixes https://bugs.gnu.org/82186
* src/dircolors.c (syntax): New global variable.
(append_quoted): Escape '!' if we are using 'csh' syntax to prevent
history substitution.
(main): Remove the syntax variable that was made global.
* tests/misc/dircolors.pl (@Tests): Add a test case.
* NEWS: Mention the bug fix.
Discovered by Anthropic's OSS Scanner, as bug ANT-2026-SFBDLZ6V.
* src/shred.c (wipefile): When --force or --remove are in use, and the
file is in a subdirectory, open a file descriptor to its parent and
perform operations on the basename relative to it.
(wipename): Add a file descriptor argument to the parent directory. Open
a readable file descriptor to the directory if we need to sync it. Use
the file descriptor with renameatu and unlinkat.
* tests/shred/unlink-race.sh: New file.
* tests/local.mk (all_tests): Add the new test case.
* NEWS: Mention the bug fixes.
Discovered by Anthropic's OSS Scanner, as bug ANT-2026-O4Q4UVP2.
Given the FROM argument is interpreted as a different base
for --hex-suffixes and --numeric-suffixes, it makes more
sense for a previous start value to be discarded.
* doc/coreutils.texi: Mention this for --hex-suffixes,
and also mention the FROM argument is interpreted as hex.
* src/split.c (main): Just reset numeric_suffix_start,
and avoid reinterpretation validation.
* tests/split/numeric.sh: Adjust accordingly.
* NEWS: Mention the change in behavior.
When FROM contained the digits a-f, next_file_name() derived the
suffix index with c - '0', giving values up to 54 for a 16 character
alphabet. Incrementing the suffix then read past the end of the
alphabet string and used those bytes in the output file names,
e.g., 'split --hex-suffixes=f' created x0f, x0s, x0u.
* src/split.c (next_file_name): Map start value characters through
the suffix alphabet rather than assuming decimal digits.
(main): Reject a start value not valid for the final suffix alphabet,
as can happen with --hex-suffixes=a --numeric-suffixes.
(set_suffix_length): Determine width using base 16 for hex suffixes.
* tests/split/numeric.sh: Add test cases.
* NEWS: Mention the bug fix.
Link: https://github.com/coreutils/coreutils/pull/404
Also discovered by Anthropic's OSS Scanner, as bug ANT-2026-DWADVADP.
* src/seq.c (scan_arg): Search for the locale decimal point.
Also handle uppercase 'P' in hex format floats.
(main): Recognize locale decimal point in apparent options.
* tests/seq/seq-locale.sh: Add test cases.
* NEWS: Mention the bug fix.
Discovered by Anthropic's OSS Scanner, as bug ANT-2026-ERV7HOGN.
* src/seq.c (dump_strings): Rearrange limit checks to
reduce rounding affects. Also add sanity check on
on the iteration number limit.
* tests/seq/seq-no-progress.sh: Add a new test.
* tests/local.mk: Reference the new test.
* NEWS: Mention the fix.
Discovered by Anthropic's OSS Scanner, as bug ANT-2026-RI0OLUBX.
* gnulib: Update to get commit 19e602707d (findprog-in: Use a default
PATH like POSIX specifies., 2026-11-02).
* tests/sort/sort-compress.sh: Add a test case.
* NEWS: Mention the bug fix.
Discovered by Anthropic's OSS Scanner, as bug ANT-2026-1R7RAVAG.
A single character --section-delimiter is completed with an implied ':'
by writing through section_del, which is assumed to still point at the
static DEFAULT_SECTION_DELIMITERS buffer. After an earlier -d with zero
or more than one character, section_del points at that argument instead,
so the write goes into the earlier argv string and past its end.
In a UTF-8 locale 'nl -d "" FILE -d x' corrupts the FILE operand,
and in the C locale 'nl -d foo -d x' uses the delimiter "xoo".
* src/nl.c (main): Point section_del at the static buffer before
building the single character delimiter.
* tests/nl/nl.sh, tests/nl/multibyte.sh: Add test cases.
* NEWS: Mention the bug fix.
Bug present since coreutils 9.0.
Link: https://github.com/coreutils/coreutils/pull/403
* src/chcon.c: Include fcntl--.h.
(change_file_context): Open a file descriptor when only a partial
context is specified. Use it to get and subsequently set the file
context, instead of using getfileconat followed by setfileconat, if
libselinux supports it on a file descriptor opened with O_PATH.
* tests/chcon/traversal-missing.sh: Adjust the test using partial
contexts to also inject open and openat errors. Add a test for complete
contexts.
* NEWS: Mention the bug fix.
Discovered by Anthropic's OSS Scanner, as bug ANT-2026-9PFL6OLT.
Co-authored-by: Pádraig Brady <P@draigBrady.com>
* src/mkfifo.c: Include fcntl--.h.
(main): When a mode is specified, open a file descriptor to its parent
and use it to create the FIFO and set its mode.
* src/mknod.c: Include fcntl--.h.
(main): When a mode is specified, open a file descriptor to its parent
and use it to create the special file and set its mode.
* NEWS: Mention the bug fix.
Discovered by Anthropic's OSS Scanner, as bug ANT-2026-ACVILIMZ.
* NEWS: Mention the bug fix.
* src/od.c (dump): Don't break the look on read error.
* tests/od/od.pl: Add a test case.
Discovered by Anthropic's OSS Scanner, as bug ANT-2026-DYUIRPOE.
Link: https://github.com/coreutils/coreutils/issues/402
* src/tail.c (tail_forever_inotify): Size the buffer based on NAME_MAX
instead of the operands. Reduce the scope of some variables.
* tests/tail/inotify-long-name.sh: New file.
* tests/local.mk (all_tests): Add the new test.
* NEWS: Mention the bug fix. Adjust the reference in a previously fixed
bug to mention it was introduced with inotify support.
Discovered by Anthropic's OSS Scanner, as bug ANT-2026-S9L24ERC.
Previously, only the basenames were printed, leading to ambiguity when
multiple directories had a file with the same name. E.g., here is the
old output:
$ mkdir -p a/{b,c}
$ touch a/{b,c}/d
$ strace -o /dev/null -e inject=lsetxattr:error=EIO \
chcon -R -u root a
chcon: failed to change context of 'd' to '...': ...
chcon: failed to change context of 'b' to '...': ...
chcon: failed to change context of 'd' to '...': ...
chcon: failed to change context of 'c' to '...': ...
chcon: failed to change context of 'a' to '...': ...
Here is the new output:
$ strace -o /dev/null -e inject=lsetxattr:error=EIO \
src/chcon -R -u root a
chcon: failed to change context of 'a/b/d' to '...': ...
chcon: failed to change context of 'a/b' to '...': ...
chcon: failed to change context of 'a/c/d' to '...': ...
chcon: failed to change context of 'a/c' to '...': ...
chcon: failed to change context of 'a' to '...': ...
This also aligns the output with other programs, e.g., 'chown':
$ strace -o /dev/null -e inject=chown,fchown,fchownat:error=EIO \
chown -R root a
chown: changing ownership of 'a/b/d': ...
chown: changing ownership of 'a/b': ...
chown: changing ownership of 'a/c/d': ...
chown: changing ownership of 'a/c': ...
chown: changing ownership of 'a': ...
* src/chcon.c (change_file_context): Add an argument for the full file
name. Use it in error messages.
(process_file): Pass the full file name from the FTSENT.
* NEWS: Mention the bug fix.
Add docs and tests for the recent gnulib strftime fixes.
* tests/misc/strftime.sh: Add a new test.
* tests/local.mk: Reference the new test.
* NEWS: Mention the bug fixes.
Fixes https://bugs.gnu.org/82130
* src/pr.c (buff_current): Define as an idx_t instead of an int.
(line_vector): Define as an array of idx_t elements instead of int.
(store_colum): Define a variable used to set buff_current as an idx_t.
* NEWS: Mention the bug fix.
Discovered by Anthropic's OSS Scanner, as bug ANT-2026-C1YW9FO0.
* src/dd.c (main): Also account for seeking bytes in a few conditions.
* tests/dd/bytes.sh: Add a test case.
* tests/dd/fail-ftruncate-fstat.sh (fail_ftruncate_fstat): New function.
Use it to test seeking on bytes, and make sure fstat and ftruncate are
called.
* NEWS: Mention the bug fix.
Discovered by Anthropic's OSS Scanner, as bug ANT-2026-NLK8TXH1.
* src/copy.c (copy_attr_quote): Return a xstrdup'd copy of the result of
quoteaf, so that slot 0 of quotearg can be overwritten by a subsequent
call without overwriting the previously quoted string.
(copy_attr_free): Free the string. Remove MAYBE_UNUSED from the string.
* tests/cp/xattr.sh: Add a getlimits_ and uses_strace_ invocation.
(block_setxattr): New function. Use it to check the error/warning
message when setting extended attributes on the destination fails.
* NEWS: Mention the bug fix.
Discovered by Anthropic's OSS Scanner, as bug ANT-2026-BPGHOHDX.
* src/install.c (initial_umask): New variable.
(strip): Set the umask to initial_umask before invoking 'strip' and then
reset it to zero after the child is created.
(main): Save the initial umask when setting it to zero.
* tests/install/strip-program.sh: Add a few invocations to test the
behavior.
* NEWS: Mention the bug fix.
Discovered by Anthropic's OSS Scanner, as bug ANT-2026-39LQ2UOD.
* src/nl.c (check_section): Add a check for a zero section delimiter
length.
* tests/nl/nl.sh: Add a test case.
* NEWS: Mention the bug fix.
Discovered by Anthropic's OSS Scanner, as bug ANT-2026-PDYYNTYZ.
* src/cksum (valid_digits): Use '=' to disambiguate hex and base64.
(split_3): Likewise.
(digest_check): Likewise.
* tests/cksum/cksum-base64-untagged.sh: Add a test case.
* NEWS: Mention the fix.
* src/cksum.c (digest_check): Reset the detection flag per file.
* tests/cksum/cksum-c.sh: Add a test case.
* tests/cksum/md5sum-bsd.sh: Likwise.
* NEWS: Mention the fix.
It's not a usual case, but for consistency "-a sha2" should support
e.g. untagged checksums that are a mix of sha256sum and sha512sum.
* src/cksum.c (split_3): Reset the sha2 variant search if
the generic sha2 is specified. It's ok to reset the global
CKSUM_ALGORITHM as its subsequent use is conflicting with
the specific chosen variant.
* tests/cksum/cksum-c.sh: Add test cases.
* NEWS: Mention the bug fix.
Discovered by Anthropic's OSS Scanner, as bug ANT-2026-83HIODH2.
Discovered by SecBuddyF (with Hy4-preview) of Tencent KeenSecurityLab.
These signals are used by timeout(1) itself, so need special handling.
Since commit v8.13-11-g80a1aca0d we incorrectly ignored them,
which was exacerbated by commit v8.26-39-g2f69dba5d which caused
the -sCHLD case to hang upon child exit.
* src/timeout.c (send_sig): Don't ignore SIGHLD, and discard
the self sent SIGALRM, and rearm the handler.
* tests/timeout/timeout.sh: Add test cases.
* NEWS: Mention the fixes.
Discovered by Anthropic's OSS Scanner, as bug ANT-2026-2EQL2L05.
* NEWS: Adjust to mention that -k without -f is resilient to blocking.
* src/timeout.c (cleanup): Unblock SIGALRM when diagnosing, so
an armed --kill-after is honored.
* tests/timeout/timeout.sh: Add a test case.
Discovered by Anthropic's OSS Scanner, as bug ANT-2026-GV4Z4T3T.
In the edge case where --verbose diagnostics might block
or induce signals, ensure we always timeout the monitored command
and do not loop diagnosing diagnostic induced signals.
* NEWS: Mention the bug fix.
* src/timeout.c (cleanup): Avoid diagnosing SIGPIPE and SIGXFSZ.
Also send the signal before diagnosing to ensure command is timed out.
* tests/env/env-signal-handler.sh: Run timeout(1) with -f to ensure
the SIGKILL is diagnosed.
* tests/timeout/timeout.sh: Likewise. Also add test cases for
SIGPIPE and SIGXFSZ.
Discovered by Anthropic's OSS Scanner, as bug ANT-2026-GV4Z4T3T.
* src/od.c (format_address_std): Add an affirm call to check that the
address is positive or equal to zero, which would have caused a
descriptive assertion in this case instead of a SIGSEGV.
(offset_add): New function.
(dump): Use it to diagnose overflows.
(dump_strings): Likewise.
* NEWS: Mention the bug fix.
Discovered by Anthropic's OSS Scanner, as bug ANT-2026-EZXPB4TK.
* src/cp.c (make_dir_parents_private): Quote the names of the directory
and the source.
* tests/cp/verbose-parents-quote.sh: New file
* tests/local.mk (all_tests): Add the new test.
* NEWS: Mention the bug.
Discovered by Anthropic's OSS Scanner, as bug ANT-2026-JJG3V3T9.
* src/chown-core.c (change_file_owner): Set the pointer to NULL if
fstatat fails.
* tests/chgrp/verbose-dangling-symlink.sh: New file.
* tests/chown/verbose-dangling-symlink.sh: New file.
* tests/local.mk (all_tests): Add the new tests.
* NEWS: Mention the bug fix.
Discovered by Anthropic's OSS Scanner, as bug ANT-2026-YYGC42VE.
* src/selinux.c (restorecon_private): Open the file with O_NOCTTY and
O_NONBLOCK.
* tests/misc/selinux.sh: Add a test case.
* NEWS: Mention the bug fix.
Discovered by Anthropic's OSS Scanner, as bug ANT-2026-L5GJ7M7X.
This adds a test for the bug fixed by commit 9192fd32e (date: bring back
-u complexity with putenv, 2026-10-22).
* tests/date/date-set.sh: New file.
* tests/local.mk (all_tests): Add the new test.
* NEWS: Mention the bug fix.
* src/factor.c (mulredc2): Add the carry to p1, which is the high word
of a two-word integer created by summing two single-word integers and is
therefore unable to overflow, instead of using a low word r0, which may
wrap around by adding the carry.
* tests/factor/mulredc2-infloop.sh: New file.
* tests/local.mk (all_tests): Add the new test.
* NEWS: Mention the bug fix.
Discovered by Anthropic's OSS Scanner, as bug ANT-2026-CFUR0JKW.
* src/tail.c (tail_forever_inotify): Fallback to polling upon overlow.
* tests/tail/inotify-overflow.sh: Add a new test.
* tests/local.mk: Reference the new test.
* NEWS: Mention the bug fix.
Discovered by Anthropic's OSS Scanner, as bug ANT-2026-UUNT73BK.
* src/basenc.c (base32hex_decode_ctx_wrapper): Ensure we don't
accept base32 only characters for base32hex.
* tests/basenc/basenc.pl: Ensure negative base32hex tests have the
appropriate number of characters to test character validation
rather than just input size validation.
* NEWS: Mention the bug fix.
Discovered by Anthropic's OSS Scanner, as bug ANT-2026-EP1XO2G4.
* src/factor.c (strtouuint): Return LONGINT_OVERFLOW only if all of the
characters are digits; otherwise, return LONGINT_INVALID.
* tests/factor/factor.pl: Add two test cases.
* NEWS: Mention the bug fix.
Discovered by Anthropic's OSS Scanner, as bug ANT-2026-IZ8PFQ7Q.
stty currently fails like:
$ stty 9600
$ saved=$(stty -g)
$ stty 19200 "$saved" # Sets 9600 but reports failure
stty: 'standard input': unable to perform all requested operations
Whereas these work fine:
$ stty 19200 9600
$ stty "$saved" 19200
* NEWS: Mention the bug fix.
* src/speedgen (cbaud_to_speed): Determine the speed
from the control flag encoding.
* src/stty.c (recover_mode): If no separate speed specified,
update the speed from the specified control flags.
* tests/stty/stty-save-speed.sh: Add test cases.
Note this changes the output format of -g.
POSIX states that the -g format only needs to be compatible
with the stty implementation that produced it.
However we improve compatibility on Linux by only outputting
the explicit speeds when they're not encoded in the control flags.
* NEWS: Mention the change in behavior.
* src/stty.c (display_recoverable): Output the speeds if needed.
(recover_mode): Read the speeds if present.
* tests/stty/stty-save-speed.sh: Add a new test.
* tests/local.mk: Reference the new test.
Link: https://github.com/coreutils/coreutils/issues/384
* src/stty.c (struct speed_desc): New type, used to differentiate
between errors and (speed_t) -1.
(last_ibaud, last_obaud): Define variables as struct speed_desc instead
of speed_t.
(check_speed): Adjust uses of last_ibaud and last_obaud to their new
definitions.
(set_speed): Likewise. Use a struct speed_desc as the argument instead
of speed_t. Check for its validity using the valid member instead of
whether it is equal to (speed_t) -1.
(apply_settings): Use struct speed_desc instead of speed_t to store the
result of string_to_baud. Check for its validity using the valid member
instead of whether it is equal to (speed_t) -1.
(string_to_baud): Adjust the function to return a struct speed_desc
instead of speed_t.
* src/speedgen (value_to_baud): Likewise.
* NEWS: Mention the bug fix.
Link: https://github.com/coreutils/coreutils/issues/383
This preserves any program name transformations, e.g., when
--program-prefix=g is used as a configuration option, unlike commit
ef874ed6c (all: set /proc/self/comm to the program name in the single
binary, 2026-10-17).
* src/coreutils.c (launch_program): Use the last component of argv[0]
when setting the comm value using prctl (PR_SET_NAME, ...).
* tests/misc/proc-self-comm.sh: When using
--enable-single-binary=shebangs, test that the comm value preserves any
program name transformations, e.g., --program-prefix=g.
* NEWS: Adjust the NEWS entry to refer to last component of argv[0]
instead of the program name.
Suggested by Pádraig Brady.
Replace the O(N) scan of watched names on each directory inotify event
with a Hash_table keyed by (parent_wd, basename), addressing the
long-standing FIXME in tail_forever_inotify.
Keep ownership consistent with wd_to_name: parent_by_name is created
only for Follow_name and returned to the caller, so fallback paths can
return without local hash cleanup.
Hash basenames with hash_string() and mix in parent_wd, matching the
existing gnulib helper rather than a hand-rolled string hash.
Matching cost for N directory events that each compare against N names
(illustrative host timings of the scan vs hash lookup alone):
N=1000: ~0.018s -> ~0.000s
N=5000: ~0.39s -> ~0.000s
N=10000: ~1.5s -> ~0.000s
End-to-end recreate storms remain largely file-system bound on this
host; the hash removes the quadratic name-matching CPU from that path.
* src/tail.c (parent_name_hasher, parent_name_comparator): New.
(tail_forever_inotify): Build and use parent_by_name; return it to the
caller.
(main): Free parent_ht when non-NULL.
* tests/tail/inotify-parent-hash.sh: Require notification mode; cover
multiple names in one directory and the same basename in two
directories.
* tests/local.mk: Reference the new test.
* NEWS: Mention the improvement.