* doc/coreutils.texi (cp invocation): Change the description slightly
so as users might not immediately discount using this option.
Mention that --reflink is overridden by the other linking options and
--attributes-only, and give an example where this might be useful.
* src/copy.c (copy_internal): Bypass the reflink if
--attributes-only is specifed.
* tests/cp/reflink-perm: Ensure both --reflink modes are
overridden by --attributes-only.
* NEWS: Mention the change in behavior.
Reported by Jim Meyering.
All tests currently pass on NFS on Linux kernel 2.6.22 at least,
but some fail on 2.6.9, so we exclude those here.
* tests/init.cfg (is_local_dir_): A new function
returning if the specified directory is on a local file system.
(require_local_dir_): A new function to skip tests
if the current directory is not on a local file system.
* tests/cp/existing-perm-race: Skip if non local.
* tests/cp/file-perm-race: Likewise.
* tests/cp/parent-perm: Likewise.
* tests/cp/parent-perm-race: Likewise.
* tests/cp/preserve-2: Likewise.
* tests/mv/part-symlink: Likewise.
* tests/du/basic: Use refactored function.
* tests/install/basic-1: Likewise.
* tests/mkdir/p-3: Likewise.
* tests/dd/skip-seek-past-dev: Likewise.
* tests/du/slink: Likewise. Remove redundant test
for NFS file system.
* tests/misc/join: s/local/locale/.
* src/copy.c (copy_attr): A new function which merges copy_attr_by_fd
and copy_attr_by_name. Also display all errors when --attributes-only
* src/copy.c (copy_reg): Skip copying the file contents if specified.
Refactor the SELinux error handling code a little and display all
SELinux errors when only copying attributes.
* src/copy.h (struct cp_options): Add a data_copy_required boolean
* src/cp.c (main): Default to copying data but don't if specified
* src/install.c: Default to copying data
* src/mv.c: Likewise
tests/cp/reflink-perm: Add a test to check that --attributes-only
does not copy data
* tests/cp/acl: Likewise. Also refactor to remove redundant
acl manipulation
* doc/coreutils.texi (cp invocation): Describe the new option
* NEWS: Mention the new feature
* tests/cp/cp-a-selinux: Initialize skip, to avoid a syntax error
in subsequent "test".
Remove redirect-to-/dev/null, now that output is always to a log file.
* src/copy.c (copy_reg): Copy xattrs _after_ setting file ownership
so that capabilities are not cleared when setting ownership.
* tests/cp/capability: A new root test.
* tests/Makefile.am (root_tests): Reference the new test.
* NEWS: Mention the fix.
* src/copy.c (copy_reg): Suppress SELinux ENOTSUP warnings consistently
between the destination being present or not. Previously we did
not suppress ENOTSUP messages when the destination was present.
(copy_internal): Use the same ENOTSUP supression method as
copy_reg() even though the issue was not seen in this case.
* tests/cp/cp-a-selinux: Add a test case for the issue and
group the other test cases in the file more coherently.
* tests/cp/cp-mv-enotsup-xattr: Do the same check for xattr
warnings, even though they did not have the issue.
* tests/cp-mv-enotsup-xattr: Create a file system from which to copy
the xattrs so that the test is not skipped if the host file system
does not have user_xattr support. Also don't erroneously fail when
built without xattr support.
* tests/cp/acl: Support USE_ACL not being defined.
* tests/mv/acl: Likewise. Also fix typo in skip message.
* tests/cp/preserve-slink-time: Support HAVE_UTIMENSAT being 0.
* tests/touch/no-dereference: Likewise.
* tests/ls/capability: Normalize so 1 is not required to be last char.
Run this command to remove the factored-out "fail=0" lines.
perl -ni -e '/^fail=0$/ or print' $(g grep -l '^fail=0$')
* tests/test-lib.sh: Initialize fail=0 here, not in 300+ scripts.
* tests/...: nearly all bourne shell scripts
Suggested by Eric Blake.
* src/copy.c (utimens_symlink): Simplify by using lutimens.
* m4/jm-macros.m4 (coreutils_MACROS): Drop utimensat; gnulib does
this for us.
* tests/cp/preserve-slink-time: Recognize lutimes support.
* src/copy.c (copy_reg): When cloning only skip the data copying
* tests/cp/reflink-perm: New test to check times and modes copied
* tests/Makefile.am: Reference the new test
* NEWS: Mention the fix
* doc/coreutils.texi (cp invocation): Document the new
"auto" and "always" options to --reflink.
* src/copy.c (copy_reg): Fall back to a standard copy
when reflink() is not supported and --reflink=auto specified.
* src/copy.h [struct cp_options] (reflink): Change type s/bool/enum/.
* src/cp.c (usage): Describe the --reflink={always,auto} options
and expand a little on what --reflink does.
(main): parse the new parameters to --reflink and allow all
--sparse options with --reflink=auto.
* src/install.c (cp_option_init): Init the enum instead of bool.
* src/mv.c (cp_option_init): Likewise.
* tests/cp/reflink-auto: A new test for falling back to normal copy.
* tests/Makefile.am: Reference the new test.
* NEWS: Mention the new feature.
* tests/cp/cp-mv-enotsup-xattr: Upon a set-up failiure, rather than
failing the test with a "framework failure" diagnostic, just skip it.
Russell Whitaker reported that this test failed on slackware.
* src/copy.c (copy_internal): On systems without utimensat don't
use utimens on a symlink, as that would dereference the symlink.
* tests/cp/abuse: To work around possible attribute preservation
failures breaking the test, use cp -dR rather than cp -a.
* NEWS: Mention it.
* doc/coreutils.texi (cp invocation): Describe it.
* src/copy.h (struct cp_options) [reflink]: New member.
* src/copy.c (usage): Describe it.
(copy_reg): If reflink is true try to clone the file.
(main): Check for --reflink.
(cp_option_init): Initialize the new member.
* src/install.c (cp_option_init): Initialize the new member.
* src/mv.c (cp_option_init): Likewise.
* tests/cp/sparse: Add a new test case.
* src/copy.c (utimensat_if_possible): New function.
(copy_internal): Remove variable, "preserve_metadata".
Replace with "dest_is_symlink". That covers all cases but one:
the one in which cp --link has created hard links to non-directories.
In that case, there is no need to update attributes of the links.
Use utimensat_if_possible, to preserve timestamps of symlinks.
* NEWS (New features): Mention this.
* tests/Makefile.am (TESTS): Add cp/preserve-slink-time.
* tests/cp/preserve-slink-time: New file.
* m4/jm-macros.m4 (coreutils_MACROS): Test for utimensat.
Reported in http://bugzilla.redhat.com/230866
Remove the optimization that avoided up to 50% of cp's read syscalls.
Do not assume that a short read on a regular file indicates EOF.
When reading from a file in /proc on linux [at least 2.6.9 - 2.6.29]
into a 4k-byte buffer or larger, a short read does not
always indicate EOF. For example, "cp /proc/slabinfo /tmp"
copies only 4068 of the total 7493 bytes. This optimization
(25719a3315, Improve performance a bit
by optimizing away; 2005-11-24) appears to have been worth less than
a 2% speed-up (and usually much less), so the impact of removing it
is negligible.
* src/copy.c (copy_reg): Don't exit the loop early.
* tests/cp/proc-short-read: New test, lightly based on a suggestion
from Mike Frysinger, to exercise this fix.
* tests/Makefile.am (TESTS): Add cp/proc-short-read.
* NEWS (Improve robustness): Mention this change.
* tests/test-lib.sh (skip_if_setgid_): New function.
* tests/setgid-check: Remove file.
* tests/Makefile.am (EXTRA_DIST): Remove setgid-check.
* tests/chmod/c-option: Use the new function rather than sourcing
the separate file.
* tests/cp/cp-parents: Likewise.
* tests/install/install-C: Likewise.
* tests/mkdir/parents: Likewise.
* tests/mkdir/perm: Likewise.
Running "mkdir dir; cp -rl dir dir" would create dir/dir/dir/...
rather than diagnosing the "copy-into-self" failure.
The easy fix would have been to revert this part of the change
[3ece0355 2008-11-09 cp: use far less memory in some cases]
that introduced the bug:
- remember_copied (dst_name, dst_sb.st_ino, dst_sb.st_dev);
+ if (!x->hard_link)
+ remember_copied (dst_name, dst_sb.st_ino, dst_sb.st_dev);
However, that would have induced the failure of the new cp/link-heap
test, due to the added memory pressure of recording 10k dev/ino pairs.
And besides, I liked that improvement and wanted to keep it.
Now that it's obvious recording the just-created-directory dev/ino
needn't depend on the setting of hard_link, I realized it is necessary
to record the pair only for the first directory created for each
source command-line argument.
I made that change, then noticed the new test, cp -rl a d d, would pass
when run once, yet output the into-self diagnostic twice. Also note
the side effect: it creates d/a and d/d. However, running that same
command a second time, now with the modified directory, would fail.
That turned out to be due to the fact that although the first into-self
failure was detected in copy_dir, that function would continue copying
other entries regardless -- and that would make it fail (eventually)
with the unwanted recursion.
* src/copy.c (copy_internal): This function needed an indicator of
whether, for a give command line argument, it had already created its
first directory. If so, no more need to record dev/ino pairs. If this
is the first, then do record its pair. Hence, the new parameter.
(copy_dir, copy): Update callers.
(copy_dir): Upon any into-self failure, break out of the loop.
* tests/cp/into-self: Test for the above.
Reported by Mikael Magnusson.
* copy.c (copy_reg): Reduce SELinux context diagnostics for 'cp -a'.
(copy_internal): Likewise
* copy.h (cp_options): Add boolean reduce_diagnostics.
* cp.c (usage): Say that --archive (-a) behaves like -dR --preserve=all.
(cp_option_init): Initialize added reduce_diagnostics.
(main): Add reduce_diagnostics for the -a option, and preserve SELinux
context, if possible.
* mv.c (cp_options_init): Initialize new cp_options booleans.
* install.c (cp_option_init): Likewise.
* NEWS: Mention those behaviour changes.
* doc/coreutils.texi: Document --preserve=context, document that
diagnostics are not shown for failures of non-mandatory attributes
(just SELinux at the moment).
* tests/cp/cp-a-selinux: Check not only failures, but succesful use
of preserving SELinux context in cp.
* src/cp.c (usage): Show new option -n in --help.
(main): Handle new option -n.
* src/mv.c (usage): Show new option -n in --help.
(main): Handle new option -n.
* doc/coreutils.texi: Document new cp/mv option -n.
* tests/cp/cp-i: Add tests for -f, -i and -n options.
* tests/mv/mv-n: New test for mv -n.
* tests/Makefile.am: Add test mv/mv-n to the list.
* NEWS: Mention the change.
cp --link was "remembering" many name,dev,inode triples unnecessarily.
cp was doing the same, even without --link, for every directory in the
source hierarchy, while it can do its job with entries merely for the
command-line arguments. Prompted by a report from Patrick Shoenfeld.
Details <http://thread.gmane.org/gmane.comp.gnu.coreutils.bugs/15081>.
* src/copy.c (copy_internal): Refrain from remembering
name,dev,inode for most files, when invoked via cp --link.
Record an infloop-avoidance triple for each directory specified
on the command line, not for each directory in the source tree.
Don't record a dir-triple when x->hard_link is set.
* NEWS (Buf fixes): Mention it.
* tests/cp/link-heap: New file. Test for cp's lowered memory usage.
* tests/Makefile.am (TESTS): Add link-heap.
* tests/test-lib.sh (Exit): New function by Ralf Wildenhues in automake
http://git.sv.gnu.org/gitweb/?p=automake.git;a=commitdiff;h=20594c08f63
* tests/**: Convert all uses:
This restrictive change converted the vast majority:
git grep -l '^(exit \$fail); exit \$fail$' \
| xargs perl -pi -e 's/'^\(exit \$fail\); exit \$fail$/Exit \$fail/'
And this did the rest, plus a few undesirable ones, so I manually
backed out the changes to ChangeLog-* and build-aux/check.mk:
git grep -l -E '\(exit [^)]+\); exit ' \
| xargs perl -pi -e 's/\(exit (.+?)\); exit \1/Exit $1/'
* tests/sparse-file: Remove file Move contents into ...
* tests/test-lib.sh (require_sparse_support_): ...here. New function.
* tests/cp/sparse: Use the function, not the file.
* tests/du/8gb: Likewise.
* tests/Makefile.am (EXTRA_DIST): Remove sparse-file.
* README (Running tests as root): Also set PATH in suggested "sudo"
command. This avoids failure of at least tests/cp/cp-a-selinux
when the default PATH does not contain /sbin.
* tests/cp/cp-a-selinux: Don't redirect stderr to /dev/null.
"mkfs" was failing due to /sbin not being in PATH.
* tests/cp/perm: Use stat to get the permission string, not ls.
This test was run only when RUN_VERY_EXPENSIVE_TESTS=yes was set
in the environment. It would fail on SELinux-enable systems
because ls-generated permission strings would not match, e.g.,
"test _-rw-r--r--+ = _-rw-r--r--" would fail.