Do not link to fchownat, fchmodat, xreallocarray.
While we’re at it, depend as little as possible on problematic
functions like fileno, strtoumax. Use only functions that
were around in C89.
Problem reported by Peter Dyballa <https://bugs.gnu.org/78509#59>.
* src/libstdbuf.c: Include stddef.h, stdlib.h, gettext.h.
Do not include stdint.h or system.h.
(_): New macro, since we no longer include system.h.
Undef strtoul, not strtoumax.
(fileno_to_name): Remove. All uses removed.
(apply_mode): New arg STREAM_NAME, so that we no longer need
to depend on fileno which might run into a Gnulib workaround.
Don’t allocate more than ULONG_MAX - 1 bytes, as that’s
not helpful in the real world and this lessens dependency
on newer features like strtoumax.
* src/sort.c (begfield): Check pointer adjustment
to avoid Out-of-range pointer offset (CWE-823).
(limfield): Likewise.
* tests/sort/sort-field-limit.sh: Add a new test,
which triggers with ASAN or Valgrind.
* tests/local.mk: Reference the new test.
* NEWS: Mention bug fix introduced in v7.2 (2009).
Fixes https://bugs.gnu.org/78507
On so-far-only-theoretical platforms with 128-bit uintmax_t,
'factor' would misbehave by not factoring enough.
Work around the bug (at a performance cost)
and document the issue. I hope someone with
more time and expertise can fix the performance cost
that this introduces.
To reproduce the correctness bug, build with
'gcc -DUSE_INT128 -DEXHIBIT_INT128_BUG';
'make check' should fail due to the new test case.
* src/factor.c (USE_INT128): New macro.
(wide_uint, wide_int, W_TYPE_SIZE, WIDE_UINT_MAX):
Define to proper values if USE_INT128.
(prime_p) [!EXHIBIT_INT128_BUG]: Work around bug
with 128-bit wide_uint, at some performance cost.
* tests/factor/factor.pl (bug-with-128-bit-uintmax_t):
New test.
This prepares for using unsigned __int128 instead of uintmax_t.
It doesn’t change behavior.
* src/factor.c (wide_uint, wide_int):
New typedefs, replacing all uses of uintmax_t, intmax_t.
(WIDE_UINT_MAX): New macro, replacing all uses of UINTMAX_MAX.
(USE_LONGLONG_H): Don’t use LONG_MAX and INTMAX_MAX (which
should have been ULONG_MAX and UINTMAX_MAX anyway).
Instead, use W_TYPE_SIZE and ULONG_WIDTH, as that will be
easier to work with if we use unsigned __int128.
(binv): Also unroll for the 128-bit case.
* src/make-prime-list.c (print_wide_uint):
Print "wide_uint" not "uintmax_t".
* src/local.mk: Compile the make-prime-list in a temporary directory
using $(BUILD_CC) so it can be run even when $(CC) is a cross-compiler.
Add some comments.
(noinst_PROGRAMS): Remove src/make-prime-list.
(src_make_prime_list_LDADD): Remove variable.
* src/make-prime-list.c: Don't include config.h and attributes.h.
Remove unnecessary #undefs
(ATTRIBUTE_CONST, ATTRIBUTE_MALLOC): Define for the host compiler.
Fixes https://bugs.gnu.org/78377
* src/factor.c (mulredc2): Remove two ‘affirm’ calls that didn’t
match the accompanying comment, and one of which has a false
positive if UINTMAX_WIDTH == 128 and we factor 2**128 + 1.
Avoid warnings like this from GCC 15:
src/basenc.c:1139:20: error: initializer-string for array of 'char'
truncates NUL terminator but destination lacks 'nonstring' attribute
(9 chars into 8 available) [-Werror=unterminated-string-initialization]
* src/basenc.c (z85_encoding, do_decode): Mark two more variables as
non-terminated.
Also, change sleep and tail to not sleep less than requested.
* bootstrap.conf (gnulib_modules): Add dtimespec-bound.
* gl/lib/dtimespec-bound.c, gl/lib/dtimespec-bound.h:
* gl/modules/dtimespec-bound: New files.
* src/sleep.c, src/tail.c, src/timeout.c: Include dtimespec-bound.h.
* src/sleep.c, src/tail.c: Don’t include xstrtod.h.
* src/sleep.c (apply_suffix, main):
* src/tail.c (parse_options):
* src/timeout.c (apply_time_suffix):
Don’t sleep less than the true number of seconds.
* src/timeout.c: Don’t include ctype.h.
(is_negative): Remove; no longer needed.
(parse_duration): Use a slightly looser bound on the timeout, one
that doesn’t need -lm on GNU/Linux. Clear errno before calling
cl_strtod.
This was seen to add about 100,000 ns to the startup time,
on a 2.6 GHz i7-5600U with glibc 2.40.
* .gitignore: Remove /lib/fenv.h.
* bootstrap.conf: Remove fenv-rounding and signbit deps.
* src/local.mk: Remove fenv lib dependency.
* src/timeout.c (is_negative): A new helper function to
be equivalent of signbit in the underflow case.
(parse_duration): Remove the rounding up logic,
as a nanosecond here or there has no significance.
This handles timeouts like 16777216.000000001 correctly;
formerly the subsecond part of that timeout was ignored.
* bootstrap.conf (gnulib_modules): Add fenv-rounding, signbit.
* src/local.mk (src_timeout_LDADD): Append $(FENV_ROUNDING_LIBM).
* src/timeout.c: Include fenv.h, math.h.
Don’t include xstrtod.h, as xstrtod’s checking now gets in the way.
(parse_duration): Round up when calling cl_strtod.
Check for -1e-1000. Don’t double-round 1e-9.
* tests/timeout/timeout-parameters.sh: Test for -0.1,
-1e-1000, 1e-1000.
* cfg.mk (codespell_ignore_words_list): Ignore false-positives.
(exclude_file_name_regexp--sc_codespell): Skip some file names.
* doc/coreutils.texi (mktemp invocation): Use "alphanumeric" which is
consistent with the rest of the documentation.
* src/expand-common.c: Fix typo.
* src/ls.c: Likewise.
* tests/split/l-chunk-root.sh: Likewise.
* src/ls.c (gobble_file): Indicating unknown ACL info with '?'
suffices for the edge case of a file being removed while reading,
or older cygwin when reading through dangling symlinks.
Reported by Corinna Vinschen.
This was seen on termux on Android with ./configure --disable-xattr
where listxattr() and getxattr() returned ENOTSUP.
Then the valid security context obtained by file_has_aclinfo()
was discounted, and problematically then freed multiple times.
Reported at https://github.com/termux/termux-packages/issues/23752
* src/ls.c (file_has_aclinfo_cache): Only discount the returned
acl info when all components are defaulted due to being unsupported.
This isn't strictly historically accurate
but most practical these days, especially since
systemd uses this as its default TERM type.
See https://github.com/coreutils/coreutils/issues/96
Tested with:
$ LS_COLORS= COLORTERM= TERM=vt220 src/ls --color
$ COLORTERM= TERM=vt220 src/dircolors
* src/dircolors.hin: Add vt220.
* who.c (scan_entries): Account for guessed tty names (e.g.
'sshd pts/1') from the readutmp module when using the systemd backend.
* bootstrap.conf (gnulib_modules): Add str_endswith.
* News: Mention the bug fix.
Addresses https://bugzilla.redhat.com/2343998
Current Gnulib arranges for fts debugging if GNULIB_FTS_DEBUG
is defined, so key off that rather than off DU_DEBUG.
* src/du.c (fts_debug): Remove decl, as Gnulib does this now.
(FTS_CROSS_CHECK): Remove; all uses removed.
(FTS_DEBUG) [!GNULIB_FTS_DEBUG]: Remove.
(long_options) [GNULIB_FTS_DEBUG]: Add a ---debug option.
(du_files): Call fts_cross_check only if fts_debug and GNULIB_FTS_DEBUG.
(main): Set fts_debug if GNULIB_FTS_DEBUG, not DU_DEBUG.
* src/chown-core.c, src/copy.c, src/cp-hash.c, src/csplit.c:
* src/expand-common.c, src/find-mount-point.c, src/force-link.c:
* src/group-list.c, src/iopoll.c, src/operand2sig.c:
* src/show-date.c, src/wc_avx2.c:
Omit unnecessary ‘extern ’ at the start of function defns.
This is less wordy, makes it a bit easier to grep for issues such
as the missing consistency checking in cksum.
* src/cksum_avx2.c, src/cksum_avx512.c, src/cksum_pclmul.c:
* src/cksum_vmull.c:
Include cksum.h instead of copying its decls/includes by hand.
This is a better way to ensure consistency among defns and uses.
* src/cksum.c [CRCTAB]: Include only config.h and stdio.h,
to simplify the crctab-generating code.
[!CRCTAB]: Do not include stdint.h or stdio.h, as cksum.h does it now.
(BIT, r, crc_remainder, main) [CRCTAB]: Use unsigned int, not
uint_fast32_t or uint32_t, as this is good enough for GNU where
unsigned int is guaranteed to be at least 32 bits, and this way we
needn’t worry about mismatches between %08x formats and uint_fast32_t.
(main) [CRCTAB]: Prefer more-local decls. Do not output
unnecessary directives to include stdint.h or stdio.h.
No need for ‘return EXIT_SUCCESS;’ nowadays.
* src/crctab.c: Regenerate.
* src/cat.c (main): Do not fail with plain ‘cat’ where input and
output are both /dev/tty, if the output happens to have O_APPEND set.
Problem reported by lilydjwg <https://bugs.gnu.org/76255>.
Also, don’t report an error if the seek position is at or after EOF,
even if O_APPEND is set.