Commit Graph
75 Commits
Author SHA1 Message Date
Giuseppe Scrivano 74cf4cb26d nproc: A new program to count the available processors
* AUTHORS: Add my name.
* NEWS: Mention it.
* README: Likewise.
* bootstrap.conf (gnulib_modules): Add nproc.
* doc/coreutils.texi (nproc invocation): Add nproc info.
* man/Makefile.am (nproc.1): Add dependency.
* man/nproc.x: New template.
* man/.gitignore: Ignore generated man page.
* po/POTFILES.in: Add src/nproc.c.
* src/.gitignore: Exclude nproc.
* src/Makefile.am (EXTRA_PROGRAMS): Add nproc.
* src/nproc.c: New file.
* tests/Makefile.am (TESTS): Add misc/nproc-{avail,positive}.
* tests/misc/nproc-avail: New file.
* tests/misc/nproc-positive: New file.
2009-11-06 16:54:12 +00:00
Jim Meyering 394e3ef72a build: use a fixed-name temporary in man/Makefile.am
* man/Makefile.am (check-x-vs-1): Using a fixed-name temporary file
is better than one ending in -$$, because many -$$-suffixed files
may accumulate over time.
2009-07-26 20:42:31 +02:00
Pádraig Brady a5a2a406f8 stdbuf: A new program to run a command with modified stdio buffering
* AUTHORS: Register as the author.
* NEWS: Mention this change.
* README: Add stdbuf command to list.
* configure.ac: Only enable on ELF systems with GCC.
* cfg.mk (sc_system_h_headers): Use VC_LIST_EXCEPT rather than
VC_LIST, so we can add an exception, if needed.
* .x-sc_system_h_headers: New file.  Exempt libstdbuf.c.
* Makefile.am (syntax_check_exceptions): Add .x-sc_system_h_headers.
* doc/coreutils.texi (stdbuf invocation): Add stdbuf info.
* man/.gitignore: Ignore generated manpage.
* src/.gitignore: Ignore stdbuf and libstdbuf.so binaries.
* man/Makefile.am (stdbuf.1): Add dependency.
* man/stdbuf.x: New file with example usage.
* po/POTFILES.in: Reference new command and shared library sources.
* src/Makefile.am (build_if_possible__progs): Add stdbuf and libstdbuf,
(pkglib_PROGRAMS): Reference optional shared lib,
(libstdbuf_so_LDADD): Ensure we don't link with non PIC libcoreutils.a.
(libstdbuf_so_LDFLAGS): Add -shared GCC option,
(libstdbuf_so_CFLAGS): Add -fPIC GCC option.
(check-README): Exclude libstbuf.
(check-AUTHORS): ditto.
(sc_tight_scope): Exclude functions starting with __.
* src/libstdbuf.c: The LD_PRELOAD shared library to control buffering.
* src/stdbuf.c: New file to setup env variables before execing command.
* tests/Makefile.am: Reference new test file.
* tests/misc/help-version: Set expected exit codes.
* tests/misc/invalid-opt: ditto.
* tests/misc/stdbuf: Add 9 tests.
2009-06-17 14:54:29 +01:00
Jim Meyering 0818c52874 build: make generated man/*.1 files read-only
This should help people notice that they are generated.
Note: each file already has a comment to that effect from help2man.
* man/Makefile.am (.x.1): Make generated files read-only.
Also, don't redirect directly to the target, $@.
2009-06-02 16:35:14 +02:00
Jim Meyering a5c627f9c6 build (man/): use automake's new $(AM_V_GEN) variable
* man/Makefile.am (.x.1, check-x-vs-1, check-programs-vs-x):
Mark with $(AM_V_GEN), so that automake-1.11 prints
"GEN $@" by default (stick with "GEN" in spite of the latter two
rules not officially generating anything -- they're just tests).
2009-06-02 16:35:14 +02:00
Jim Meyering e6d2d94794 maint: normalize leading-TAB indentation in Makefiles
* maint.mk (sc_makefile_TAB_only_indentation): New rule.
Replace each TAB+8-space sequence with two TABs.
* man/Makefile.am: Likewise.
* build-aux/check.mk: Likewise.
I used this command (run it more than once, if needed):
t=$'\t'; git grep -l -E "$t {8}"|grep -E 'Makefile|\.mk$' \
| xargs perl -pi -e 's/\t {8}/\t\t/'
2009-03-18 12:40:07 +01:00
Jim Meyering ddf56e0440 doc: ensure that emit_bug_reporting_address changes propagate to *.1
* man/Makefile.am ($(MAN)): Depend on system.h.
2009-01-27 20:20:07 +01:00
Ralf Wildenhues e10e4b6697 various VPATH-related fixes
* maint.mk (VC_LIST): Prepend '$(srcdir)/'.
(patch-check): Fix to make it work with a VPATH build.
* src/Makefile.am (sc_tight_scope): Likewise.
* man/Makefile.am (.x.1): Do not make outputs unwritable.
2008-09-14 17:42:48 +02:00
Pádraig Brady 75e0047c4b Add new program: truncate
* AUTHORS: Register as the author
* NEWS: Mention this change
* README: Add truncate command to list
* src/truncate.c: New command
* src/Makefile.am: Add truncate command to list to build
* src/.gitignore: Add truncate binary to list to ignore
* doc/coreutils.texi (truncate invocation): Add truncate info
* man/Makefile.am: Add truncate man page to list to build
* man/truncate.x: Add truncate man page template
* po/POTFILES.in: Add truncate to list to translate
* tests/Makefile.am: Add truncate tests
* tests/misc/help-version: Add support for new truncate command
* tests/misc/truncate-dangling-symlink: check dangling link ok
* tests/misc/truncate-dir-fail: ensure dirs fail
* tests/misc/truncate-fail-diag: validate messages for missing paths
* tests/misc/truncate-fifo: ensure fifos ignored
* tests/misc/truncate-no-create-missing: ensure -c option honoured
* tests/misc/truncate-overflow: check signed integer overflows
* tests/misc/truncate-owned-by-other: root permissions check
* tests/misc/truncate-parameters: check invalid parameter combinations
* tests/misc/truncate-relative: check invalid relative sizes
2008-06-06 14:16:45 +02:00
Pádraig Brady 265c4b83a8 new program: timeout
* AUTHORS: Register as the author.
* NEWS: Mention this change.
* README: Add timeout command to list.
* src/timeout.c: New file.
* src/kill.c (operand2sig): Move function to its own file,
now that timeout.c will also use it.
* src/operand2sig.c (operand2sig): New file, extracted from kill.c.
* src/operand2sig.h (operand2sig): Declare.
* src/Makefile.am (EXTRA_PROGRAMS): Add timeout.
* src/.gitignore: Add timeout binary to list to ignore.
* doc/coreutils.texi (timeout invocation): Add timeout info.
(Signal specifications): New section, also referenced by kill.
* man/Makefile.am (timeout.1): Add dependency.
* man/timeout.x: New file.
* po/POTFILES.in: Add timeout.c and operand2sig.c to list to translate.
* tests/Makefile.am (TESTS): Add the two new tests.
* tests/misc/help-version: Add support for new timeout command.
* tests/misc/invalid-opt: Add support for new timeout command.
* tests/misc/timeout: New file: check basic timeout operation.
* tests/misc/timeout-parameters: New file: check invalid parameter
combinations.
2008-06-02 14:40:26 +02:00
Jim Meyering 677610ec7c Remove today's automake kludge, altogether. Fix properly.
* man/Makefile.am: Use dist_man1_MANS instead of dist_man_MANS.
Suggestion from Ralf Wildenhues.
2008-03-20 19:04:50 +01:00
Jim Meyering 4682f132f2 Kludge to make automake generate install-man rules
* man/Makefile.am (dist_man_MANS): Add a literal, rm.1.
Without this, "make install" would not install man pages.
However, with this kludge, the rm.1 man page is installed
even when you configure with --enable-no-install-program=rm.
2008-03-20 18:01:35 +01:00
Jim Meyering 8058da0065 Revert recent man/Makefile.am change.
Revert 4b544e447e.
* man/Makefile.am: That change was only a band-aid.  It solved
the stated problem, but not a deeper one: that "make install"
would no longer man pages.  Reported by Dmitry V. Levin.
The latter problem arose in
167b8025ac with the removal of
the sole literal from the definition of dist_man_MANS.  When
automake perceives dist_man_MANS as empty, it no longer emits
the install-man* rules.
2008-03-20 17:59:44 +01:00
Jim Meyering 4b544e447e "make" would not always update man/*.1 files (but "make dist" would)
* man/Makefile.am (BUILT_SOURCES): Define, so that "make" always
updates man/*.1 files.  Reported by Bob Proulx.
2008-03-19 08:46:41 +01:00
James Youngman 167b8025ac Replace groups.sh with groups.c.
* src/groups.c (main): New file, replacing groups.sh.
* src/group-list.c, src/group-list.h: New files, factored out of id.c,
implementing the functionality that "id" and "groups" have in common.
* src/id.c (print_full_info): Avoid a segfault when trying to print
an error message if getgroups fails.
(print_group_list): Move to group-list.c.
(print_group): Likewise.
* man/Makefile.am: When building groups.1, obtain the help text
from src/groups.c, not src/groups.sh.
(noinst_HEADERS): Add group-list.h.
(group): Remove rule.
(dist_man_MANS): Remove groups.1.
* doc/coreutils.texi (groups: Print group names a user is in):
Explain why "groups" and "groups $(id -un)" give different results
in existing login sessions after you change the group database.
(id: Print user identity): Likewise for "id".
* po/POTFILES.in: Add src/group-list.c and src/groups.c.
* NEWS: mention this.
* AUTHORS: Update.
2008-02-13 14:37:22 +01:00
Jim Meyering a7f5e64909 Avoid "make distcheck" failure: newly-created man/*.1 files not removed
* Makefile.am (EXTRA_DIST): Add .version.
(.version): New rule.
(dist-hook): Don't create $(distdir)/.version here, now that it's
being distributed.
* man/Makefile.am (common_dep): Use ../.version, not ../VERSION.
(../VERSION): Remove rule.
* GNUmakefile (dummy): Create .version, not VERSION.
Add an extra "...:= $(shell..." statement to ensure that
.version exists even when the preceding code is not run.
* .gitignore: Remove both .version and VERSION.

Signed-off-by: Jim Meyering <meyering@redhat.com>
2008-01-29 09:40:31 +01:00
Jim Meyering ca3de82a18 Ensure that each version string change propagates to man pages.
* man/Makefile.am (common_dep): Don't depend on configure.ac for
version changes.  Instead, depend on ../VERSION.
(../VERSION): New rule.
* Makefile.am (DISTCLEANFILES): Define.
* GNUmakefile: Update ./VERSION.
* .gitignore: List VERSION.
Reported by Sven Joachim.
2008-01-26 17:16:38 +01:00
Jim Meyering 8ddc5056f2 Avoid spurious "make check" failures due to omitted programs.
* man/Makefile.am (distcheck-hook): Make check rules dependents of
this target, not of check-local, so that people aren't distracted by
failures due to programs omitted via --enable-no-install-program=...
2007-12-20 14:03:12 +01:00
Jim Meyering d471effd85 Use tighter regexps when performing name substitution.
* man/Makefile.am (mapped_name): Add ^ and $$ anchors.

Signed-off-by: Jim Meyering <meyering@redhat.com>
2007-11-05 11:14:05 +01:00
Jim Meyering 99b039fead New program: mktemp.
* NEWS: Mention this.
* README: Add mktemp to the list.
* AUTHORS: Add this: mktemp: Jim Meyering
* src/mktemp.c: New file.
* src/Makefile.am (bin_PROGRAMS): Add mktemp.
(mktemp_LDADD): Add $(LIB_GETHRXTIME).
* man/mktemp.x: New file.
* man/Makefile.am (dist_man_MANS): Add mktemp.1.
(mktemp.1): New dependency.
* man/.cvsignore: Add mktemp.1.
* man/.gitignore: New file.
* src/.cvsignore, src/.gitignore: Add mktemp.
* tests/misc/mktemp: New file.
* tests/misc/Makefile.am (TESTS): Add mktemp.
* tests/Coreutils.pm (run_tests): Give the POST-test function
access to stdout and stderr contents, so it can verify that
the named-on-stdout file/dir does indeed exist and has proper
permissions, etc.
[po/ChangeLog]
* POTFILES.in: Add src/mktemp.c.
2007-10-07 19:44:38 +02:00
Jim Meyering 71aa3ea880 Update all copyright notices to use the newer form. 2007-07-23 14:35:58 +02:00
Jim Meyering 471d33582e Add support for enabling/disabling installation of specified programs.
* NEWS: Mention new configure-time options.
Mention that neither arch nor su is built/installed, by default.
* m4/include-exclude-prog.m4: New file.
* configure.ac: Use new macro, gl_ADD_PROG, rather than
manually appending to OPTIONAL_BIN_PROGS and MAN.
Move the code that adds "df" to the list of programs to build from
m4/jm-macros into this file.
Use gl_INCLUDE_EXCLUDE_PROG, then handle special cases: ginstall, [.
(NO_INSTALL_PROGS_DEFAULT): AC_SUBST it.  Used by man/Makefile.am.
* man/Makefile.am (dist_man_MANS): Remove from this list all man pages
corresponding to "bin" programs. Add $(MAN) instead.
(optional_mans): Remove all uses.
(check-x-vs-1): Adapt to work even though arch and su are typically
no longer built (and neither are their .1 files).
* src/Makefile.am (install_su): Rename from INSTALL_SU, now that
INSTALL_SU has a different meaning. Use the new $(INSTALL_SU) value.
2007-07-10 22:55:15 +02:00
Karel Zak 264021699c New program: arch
* NEWS: Mention arch.
* README: Add arch to the list of programs.
* AUTHORS: Add arch.
* src/uname.c: Include "uname.h".
(PROGRAM_NAME): Handle arch, too.
(ARCH_AUTHORS): Define.
(uname_long_options, arch_long_options): Renamed and new globals.
(usage): Handle arch-mode as well as uname-mode.
(decode_switches): New function, extracted from main,
to handle arch-mode as well as uname-mode.
(main): Handle both modes.
* src/uname-arch.c: New program, alias for "uname -m".
* src/uname-uname.c: New file, default uname mode.
* src/uname.h: New file, uname modes.
* src/Makefile.am (EXTRA_PROGRAMS): Add arch.
(uname_SOURCES, arch_SOURCES): Define.
* man/arch.x: New file.
* man/Makefile.am (dist_man_MANS): Add arch.1.
(arch.1): New dependency.
* tests/misc/arch: New test, compare "arch" with "uname -m"
* configure.ac (OPTIONAL_BIN_PROGS): Add arch.
(MAN): Add arch.1.
* .x-sc_require_config_h: Exempt uname-arch.c and uname-uname.c
from the always-include-<config.h> rule.

Signed-off-by: Karel Zak <kzak@redhat.com>
Signed-off-by: Jim Meyering <jim@meyering.net>
2007-07-10 19:00:00 +02:00
Jim Meyering 33342c1a0a Change "version 2" to "version 3" in all copyright notices. 2007-07-10 13:35:56 +02:00
Jim Meyering c6922b6f7e * src/runcon.c: New program.
* src/Makefile.am (bin_PROGRAMS): Add runcon.
(runcon_LDADD): Define.
* README: Add runcon to the list of programs.
* AUTHORS: Add this: runcon: Russell Coker
* tests/help-version: Add runcon as an exception.
* man/Makefile.am (dist_man_MANS): Add runcon.1.
(runcon.1): New dependency.
* po/POTFILES.in: Add src/runcon.c.
2007-03-29 21:37:06 +02:00
Jim Meyering 85d6c618b0 * man/chcon.x: New file.
* man/Makefile.am: Build chcon.1.
2007-03-29 21:37:05 +02:00
Jim Meyering 75460e090c Avoid a shell syntax error, when building with an inadequate Perl.
* man/Makefile.am (.x.1): Add quotes around $(PERL) in case, since
it can expand to "/.../missing perl".
2007-02-24 09:26:56 +01:00
Jim Meyering 90390c6a92 * man/Makefile.am (.x.1): Warn when unable to update a man page.
Suggestion from Bruno Haible.
2007-02-24 09:14:56 +01:00
Bruno Haible 63813d0950 Handle better the combination of old Perl and a pre-c99 compiler.
* man/Makefile.am (.x.1): If the autoconf test has determined that
perl is missing or not a sufficient version, do nothing.
2007-02-24 08:51:19 +01:00
Jim Meyering 0ee9adb1fa * man/Makefile.am (.x.1): Make help2man use $(PACKAGE_STRING) as the
"source".  I.e. "GNU coreutils 6.7".
2006-12-09 19:20:56 +01:00
Ralf Wildenhues 8b139ff78c Arrange to install manpages only for tools that are installed.
* man/Makefile.am (dist_man_MANS): Replace all optional manpages
with `$(MAN)', computed at configure time; also, list them ...
(optional_mans): ... in this new variable.
(max_aux, EXTRA_DIST): Ensure that we distribute all manpages.
2006-11-16 09:57:34 +01:00
Jim Meyering bad80a7223 * Makefile.am (THANKS-to-translators): Add missing $(srcdir).
(MAINTAINERCLEANFILES): Add .kludge-stamp.
* man/Makefile.am (MAINTAINERCLEANFILES): Typo $(dist_man_MANS)
instead of $(man_MANS).

2006-10-12  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
2006-10-12 21:10:43 +00:00
Paul Eggert 218fa5c61b Add/fix copyright notices and adjust to latest GNU FDL. 2006-08-17 19:58:17 +00:00
Paul Eggert 8cfbf68782 (dist_man_MANS): Add shuf.1.
(shuf.1): New dependency.
2006-08-08 22:18:39 +00:00
Jim Meyering aeacca612b Build base64.1. 2006-02-27 10:53:49 +00:00
Jim Meyering 0ebfe3cf4b (dist_man_MANS): Add the corresponding .1 names.
(sha224sum.1, sha256sum.1, sha384sum.1, sha512sum.1): New dependencies.
2005-10-23 15:17:41 +00:00
Jim Meyering 74583cd9fb (.x.1): Remove temp directory first. 2005-10-13 14:12:51 +00:00
Paul Eggert 10b4a29f64 (.x.1): Remove "COMMAND.td/" from examples. 2005-04-05 22:21:14 +00:00
Jim Meyering 6e946041de (all_programs): Revert previous patch; updated all_programs.list fixes this.
(.x.1): No need to add $(EXEEXT).
2005-01-24 08:21:39 +00:00
Jim Meyering 7b6aa4dea7 (all_programs): Account for $(EXEEXT). 2005-01-11 16:51:03 +00:00
Jim Meyering d2edfe4f83 (.x.1): Remove now-unnecessary use of
locally-added --program-name=NAME option.  Now, help2man gets
the name from the [NAME] section (i.e. from our .x file).
2004-11-25 12:43:53 +00:00
Jim Meyering 23006caee3 Don't assume that "make -C" works; Solaris "make" doesn't have -C.
* src/Makefile.am (all_programs.list): New rule, copied from
	man/Makefile.am and tests/Makefile.am, except that we use the
	system tr rather than ./tr and we don't use tr -s.
	* tests/Makefile.am (all_programs): Use it.
	* man/Makefile.am (all_programs): Likewise.  Renamed from programs,
	for consistency.  All uses changed.
2004-05-13 07:04:58 +00:00
Jim Meyering d8c64d085c (.x.1): Use help2man's new --program-name=NAME option. 2004-04-20 10:04:11 +00:00
Jim Meyering ada07ea00b (.x.1): Remove --info-page= option, reverting
the change of 2004-01-22.  I can no longer reproduce the problem
that prompted that change, and `info coreutils pr' would display the
`printing text' section of the manual, not the one on `pr invocation'.
2004-03-22 22:26:16 +00:00
Jim Meyering 9da5487bf9 (EXTRA_DIST): Add help2man. 2004-01-23 15:54:35 +00:00
Jim Meyering 14abf5e070 (.x.1): Prefix help2man invocation with `$(PERL) --'
so it works on systems with Perl installed somewhere other than in /usr/bin.
2004-01-23 15:41:01 +00:00
Jim Meyering 2f156f64b8 (.x.1): Invoke our own (tweaked) copy of help2man.
Use --info-page='coreutils PROG' option.
Now, readlink.1 refers the user to `info coreutils readlink'
rather than to `info readlink'.  Reported by Matt Swift.
2004-01-22 08:09:38 +00:00
Jim Meyering 9bc557bf88 (check-programs-vs-x):
Work even if $(programs) contains '$'.
Work even if 'missing=1' in environment.
Don't report an error simply because $(programs) outputs nothing.
2003-11-06 08:03:27 +00:00
Jim Meyering 8e9121a740 (programs, check-x-vs-1): Use ../src/tr -s ' ' '\n' in place
of `fmt -1'.  Using the just-built tr is a little cleaner.
Christian Krackowizer reported that HPUX 10.20 doesn't have fmt.
2003-09-10 09:26:56 +00:00
Jim Meyering a1e0d54e2d (programs): Use ../src, not $(srcdir)/../src.
(check-programs-vs-x): Fail if $(programs) is empty.
2003-09-08 09:17:32 +00:00