* src/truncate.c: Explicitly convert from off_t to intmax_t
when printing numbers as they may be different types.
Also don't mix size_t and off_t types in operations as
the latter will be promoted to unsigned when these types
are the same size.
* src/truncate.c (parse_len): Use a temporary of type intmax_t,
rather than off_t; detect out of range [OFF_T_MIN..OFF_T_MAX].
(main) [IF_LINT]: Initialize, to avoid an unwarranted
"may be used uninitialized" warning.
Reported by Michael Geng.
Signed-off-by: Pádraig Brady <P@draigBrady.com>
* src/sort.c: (static unsigned int nmerge) Replace constant NMERGE.
(specify_nmerge) Validate and apply new option.
(mergefps) Replace some arrays with pointers to xnmalloc'd storage.
* tests/misc/sort-merge: Test new option.
* doc/coreutils.texi: Describe new option.
* NEWS: Advertise new option.
* src/sort.c: Support new option.
* tests/misc/sort-files0-from: Test new option.
* tests/misc/Makefile.am: Indicate new test.
* docs/coreutils.texi: Explain new option.
* NEWS: Advertise new option.
Signed-off-by: Bo Borgerson <gigabo@gmail.com>
* src/join.c (struct seq): Use a (struct line **) for `lines' rather than
one long (struct line *). This allows individual lines to be swapped out
if necessary.
(reset_line): Get a line ready for new input.
(init_linep): Create a new line and assign it to the the pointer passed in.
(spareline[2]): Hold a spare line for each input file.
(free_spareline): Clean up.
(get_line): Take a (struct line **) instead of a (struct line *). If the
line to be overwritten is the previous line for the current file then swap
it out for the spare.
(join): Accomodate new structure of SEQs and new parameters to get_line;
Don't free stale lines until the end -- they're re-usable now.
(dup_line): Remove function.
* NEWS: Mention the performance improvement.
* src/chcon.c (process_file): Append "\n" to --verbose diagnostic.
* tests/misc/chcon: Add a test for the above.
* NEWS: mention the bug fix
Reported by Carl D. Roth in http://bugzilla.redhat.com/451478.
* src/od.c (decode_one_format): Alter the format, again.
(FMT_BYTES_ALLOCATED): Reduce size by adjusting to new format.
(MAX_INTEGRAL_TYPE_SIZE): Move earlier in the file.
(charname): Turn it into a 2D array, since there's no need for
pointers now.
(PRINT_TYPE, print_named_ascii, print_ascii): Add a width
parameter.
(write_block): Account for width parameter.
Using ideas from Paul Eggert.
* src/od.c (struct tspec): Add pad_width field, and adjust
print_function prototype.
(decode_one_format): Rewrite all fmt_string values to account for
pad width.
(FMT_BYTES_ALLOCATED): Adjust to new format style.
(main): Compute pad width per spec.
(write_block): Account for pad width.
(dump): Don't print padding-only fields.
(PRINT_TYPE, print_named_ascii, print_ascii): All print functions
adjusted to use variable pad width.
* tests/Makefile.am (TESTS): Add test.
* tests/misc/od-multiple-t: New file.
* THANKS: Update.
* NEWS: Mention the improvement.
Reported by Gary Johnson.
* src/od.c (includes): Add xprintf.h.
(PRINT_TYPE): New macro, using xprintf instead of printf.
(print_s_char, print_char, print_s_short, print_short, print_int)
(print_long, print_long_long, print_float, print_double)
(print_long_double): Factor into PRINT_TYPE macro.
(print_named_ascii, print_ascii): Use xprintf.
* NEWS: Mention this as a bug fix.
* NEWS: List new behavior.
* doc/coreutils.texi (checkOrderOption) New macro for
describing `--check-order' and `--nocheck-order', used in
both join and comm.
* src/comm.c (main): Initialize new options.
(usage): Describe new options.
(compare_files): Keep an extra pair of buffers for the previous
line from each file to check the internal order.
(check_order): If an order-check is required, compare and handle
the result appropriately.
(copylinebuffer): Copy a linebuffer; used for copy before read.
* tests/misc/Makefile.am: List new test.
* tests/misc/comm: Tests for the comm program, including the
new order-checking functionality and attendant command-line options.
Change exit values from ETIMEDOUT and ECANCELED,
the values of which are system dependent, to
124 and 125 respectively.
* src/timeout.c (EXIT_TIMEDOUT, EXIT_CANCELED): Define.
(usage, main): Adjust.
* coreutils.texi (timeout invocation): Update.
* tests/misc/timeout: Adjust.
* AUTHORS: Register as the author
* NEWS: Mention this change
* README: Add truncate command to list
* src/truncate.c: New command
* src/Makefile.am: Add truncate command to list to build
* src/.gitignore: Add truncate binary to list to ignore
* doc/coreutils.texi (truncate invocation): Add truncate info
* man/Makefile.am: Add truncate man page to list to build
* man/truncate.x: Add truncate man page template
* po/POTFILES.in: Add truncate to list to translate
* tests/Makefile.am: Add truncate tests
* tests/misc/help-version: Add support for new truncate command
* tests/misc/truncate-dangling-symlink: check dangling link ok
* tests/misc/truncate-dir-fail: ensure dirs fail
* tests/misc/truncate-fail-diag: validate messages for missing paths
* tests/misc/truncate-fifo: ensure fifos ignored
* tests/misc/truncate-no-create-missing: ensure -c option honoured
* tests/misc/truncate-overflow: check signed integer overflows
* tests/misc/truncate-owned-by-other: root permissions check
* tests/misc/truncate-parameters: check invalid parameter combinations
* tests/misc/truncate-relative: check invalid relative sizes
* src/date.c (usage): Use 20, not 21, for current century.
* THANKS: Update.
Reported by Dameon G. Rogers, fix suggested by Philip Rowlands.
Signed-off-by: Eric Blake <ebb9@byu.net>
* AUTHORS: Register as the author.
* NEWS: Mention this change.
* README: Add timeout command to list.
* src/timeout.c: New file.
* src/kill.c (operand2sig): Move function to its own file,
now that timeout.c will also use it.
* src/operand2sig.c (operand2sig): New file, extracted from kill.c.
* src/operand2sig.h (operand2sig): Declare.
* src/Makefile.am (EXTRA_PROGRAMS): Add timeout.
* src/.gitignore: Add timeout binary to list to ignore.
* doc/coreutils.texi (timeout invocation): Add timeout info.
(Signal specifications): New section, also referenced by kill.
* man/Makefile.am (timeout.1): Add dependency.
* man/timeout.x: New file.
* po/POTFILES.in: Add timeout.c and operand2sig.c to list to translate.
* tests/Makefile.am (TESTS): Add the two new tests.
* tests/misc/help-version: Add support for new timeout command.
* tests/misc/invalid-opt: Add support for new timeout command.
* tests/misc/timeout: New file: check basic timeout operation.
* tests/misc/timeout-parameters: New file: check invalid parameter
combinations.
sha1sum, sha224sum, sha384sum, and sha512sum accept it, too.
* src/md5sum.c: add option --quiet to suppress OK messages
* doc/coreutils.texi: document option --quiet
* tests/misc/md5sum: add test for option --quiet
* NEWS: mention new option --quiet for md5sum+sha*sum in "New
features" section
The underlying performance problem is being dealt with in Automake
by limiting the number of install invocations, and in SELinux with
incremental changes as well as a potential new implementation.
* src/Makefile.am (ginstall_CPPFLAGS) [ENABLE_MATCHPATHCON]: Define.
* src/install.c [ENABLE_WHEN_MATCHPATHCON_IS_MORE_EFFICIENT]:
Rename to ENABLE_MATCHPATHCON.
* NEWS: mention this change
* src/Makefile.am (install-exec-am): Override the standard
automake-generated target, so we can decide whether to use
the usual install-one-by-one rule, or whether we can use
the new install-many-at-once rule:
(cu-install-binPROGRAMS): New rule.
* AUTHORS: Add coding: utf-8 comment at end.
Spell François' and Torbjörn's names properly.
* src/Makefile.am: Parse AUTHORS file more carefully.
Use perl to join now-split lines.
Use en_US.UTF-8 to generate --version output.