* gnulib: Update to latest to get the fix to
propagate the appropriate error message.
* tests/install/basic-1.sh: Add a test case.
* NEWS: Mention the bug fix.
Addresses https://bugs.gnu.org/79072
Update to latest gnulib with new copyright year.
Run "make update-copyright" and then...
* gnulib: Update included in this commit as copyright years
are the only change from the previous gnulib commit.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
* tests/sample-test: Adjust to use the single most recent year.
* NEWS: Mention the change in behavior.
* src/install.c (need_copy): s/lstat/stat/ for the source.
* tests/install/install-C.sh: Add test cases
(and improve existing test case which wan't valid
due to the existing non standard modes on test files).
Addresses https://bugs.gnu.org/72707
Update to latest gnulib with new copyright year.
Run "make update-copyright" and then...
* gnulib: Update included in this commit as copyright years
are the only change from the previous gnulib commit.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Manually update copyright year,
until we fully sync with gnulib at a later stage.
* tests/sample-test: Adjust to use the single most recent year.
* src/install.c (strip): Prepend "./" to file names with a leading "-".
* tests/install/strip-program.sh: Add a test case.
* NEWS: Mention the bug fix.
Reported in https://bugs.debian.org/1034429
Update to latest gnulib with new copyright year.
Run "make update-copyright" and then...
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Manually update copyright year,
until we fully sync with gnulib at a later stage.
* tests/sample-test: Adjust to use the single most recent year.
When the destination for mv is a directory, use functions like openat
to access the destination files, when such functions are available.
This should be more efficient and should avoid some race conditions.
Likewise for 'install'.
* src/cp.c (must_be_working_directory, target_directory_operand)
(target_dirfd_valid): Move from here ...
* src/system.h: ... to here, so that install and mv can use them.
Make them inline so GCC doesn’t complain.
* src/install.c (lchown) [HAVE_LCHOWN]: Remove; no longer needed.
(need_copy, copy_file, change_attributes, change_timestamps)
(install_file_in_file, install_file_in_dir):
New args for directory-relative names. All uses changed.
Continue to pass full names as needed, for diagnostics and for
lower-level functions that do not support directory-relative names.
(install_file_in_dir): Update *TARGET_DIRFD as needed.
(main): Handle target-directory in the new, cp-like way.
* src/mv.c (remove_trailing_slashes): Remove static var; now local.
(do_move): New args for directory-relative names. All uses changed.
Continue to pass full names as needed, for diagnostics and for
lower-level functions that do not support directory-relative names.
(movefile): Remove; no longer needed.
(main): Handle target-directory in the new, cp-like way.
* tests/install/basic-1.sh:
* tests/mv/diag.sh: Adjust to match new diagnostic wording.
Run "make update-copyright" and then...
* gnulib: Update to latest with copyright year adjusted.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
* tests/sample-test: Adjust to use the single most recent year.
Run "make update-copyright" and then...
* gnulib: Update to latest with copyright year adjusted.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
* tests/sample-test: Adjust to use the single most recent year.
Run "make update-copyright" and then...
* gnulib: Update to latest with copyright year adjusted.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
* tests/sample-test: Adjust to use the single most recent year.
Run "make update-copyright" and then...
* gnulib: Update to latest with copyright year adjusted.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
* tests/sample-test: Adjust to use the single most recent year.
* tests/cp/cp-a-selinux.sh: Use 'skip_' rather than the probably
undefined 'skip'.
* tests/du/2g.sh: Likewise.
* tests/install/install-Z-selinux.sh: Likewise.
* tests/misc/chcon.sh: Likewise.
* tests/misc/selinux.sh: Likewise.
* tests/mkdir/restorecon.sh: Likewise.
* cfg.mk (sc_prohibit-skip): A new syntax check to catch the issue.
Run "make update-copyright" and then...
* gnulib: Update to latest with copyright year adjusted.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
* tests/sample-test: Adjust to use the single most recent year.
On some setups the root:object_r:tmp_t context is invalid.
This does indicate a limitation in the test framework,
but for now we'll relax this to skipping the tests.
The tests still run on a Fedora 25 system for example.
* tests/cp/cp-a-selinux.sh: Upon chcon error, skip rather than ERROR.
* tests/install/install-Z-selinux.sh: Likewise.
* tests/misc/chcon.sh: Likewise.
* tests/misc/runcon-no-reorder.sh: Likewise.
* tests/misc/selinux.sh: Likewise.
* tests/mkdir/restorecon.sh: Likewise.
Run "make update-copyright" and then...
* gnulib: Update to latest with copyright year adjusted.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
* tests/sample-test: Adjust to use the single most recent year.
When running "make check" on a Linux system running SELinux with a
non-MLS policy, tests/mkdir/restorecon.sh test fails with:
chcon: invalid context: root:object_r:tmp_t:s0: Invalid argument
Indeed in such a configuration, contexts cannot have ":s0" suffix.
* init.cfg (get_selinux_type): Refactor this function to here
from various tests. Update to work with a non-MLS policy.
(mls_enabled_): A new function to detect if MLS is enabled.
(skip_if_mcstransd_is_running_): Update to not skip when
MLS is not enabled.
* tests/mkdir/restorecon.sh: Use a valid non-MLS context when needed.
* tests/install/install-Z-selinux.sh: Likewise.
* tests/cp/cp-a-selinux.sh: Likewise.
* tests/misc/selinux.sh: Likewise.
* tests/misc/chcon.sh: Skip if non-MLS as --range used throughout.
Fixes http://bugs.gnu.org/22631
* src/copy.h (cp_options): Add a new flag for install(1).
* src/copy.c (copy_internal): For cp, also output remediation
advice which also indicates why directories aren't copied by default.
The message is unchanged for install(1).
* src/cp.c (cp_option_init): Init install_mode to false.
* src/mv.c (cp_option_init): Likewise.
* src/install.c (cp_option_init): Init install_mode to true.
* tests/install/basic-1.sh: Add a test case.
* tests/cp/link-deref.sh: Adjust test case.
Fixes http://bugs.gnu.org/24958
* doc/coreutils.texi (install invocation): Update -Z documentation.
* src/install.c (make_ancestor): Set default security context before
calling mkdir() if the -Z option is given.
(process_dir): Call restorecon() on the destination directory if the
-Z option is given.
(usage): Update -Z documentation.
* tests/install/install-Z-selinux.sh: A new test for 'install -Z -D'
and 'install -Z -d' based on tests/mkdir/restorecon.sh.
* tests/local.mk: Reference the test.
* NEWS: Mention the improvement.
Reported at https://bugzilla.redhat.com/1339135
Fixes http://bugs.gnu.org/23868
* src/install.c (mkancesdirs_safe_wd): Unconditionally
restore the current working directory when possibly called
multiple times (from install_file_in_dir()).
* tests/install/create-leading.sh: Add a test case.
* NEWS: Mention the fix.
Fixes http://bugs.gnu.org/21497
Run "make update-copyright" and then...
* gnulib: Update to latest with copyright year adjusted.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
* tests/sample-test: Adjust to use the single most recent year.
A side effect of this cleanup is we no longer
depend on our own kill command being built.
* init.cfg (require_trap_signame_): A new function to verify
that the shell supports specifying traps by signal name.
(require_kill_group_): A new function to ensure the shell
supports sending a signal to a group.
* tests/du/move-dir-while-traversing.sh: Ensure trap supports
signal names.
* tests/misc/stty-invalid.sh: Likewise.
* tests/misc/stty-pairs.sh: Likewise.
* tests/misc/stty-row-col.sh: Likewise.
* tests/misc/stty.sh: Likewise.
* tests/misc/sort-compress.sh: Likewise. Also simplify trap call.
* tests/install/trap.sh: Likewise.
* tests/misc/timeout.sh: Likewise.
* tests/dd/stats.sh: Likewise. Also use default kill command.
* tests/misc/timeout-group.sh: Likewise.
Since non interactive shells don't generally set $SHELL,
its value is propagated through the tests and may cause issues;
for example if $SHELL implicitly adjusts $PATH when run.
Instead we set $SHELL to that determined by the posix-shell module,
and use that consistently for all test sub scripts,
including those created thorugh the `split --filter` command.
* tests/local.mk: Explicitly set $SHELL to $(PREFERABLY_POSIX_SHELL)
which defaults to $CONFIG_SHELL and thus usually /bin/sh.
* tests/envvar-check: Remove bash environment variables with
side effects, in case /bin/bash was selected for $SHELL.
* tests/misc/help-version.sh: Remove redundant initialization of $SHELL.
* tests/install/strip-program.sh: Use $SHELL for sub script.
* tests/misc/sort-compress-hang.sh: Likewise.
* tests/misc/sort-compress-proc.sh: Likewise.
* tests/misc/sort-compress.sh: Likewise.
* tests/misc/timeout-group.sh: Likewise.
* tests/rm/fail-eperm.xpl: Remove redundant elision of bash env vars.
* tests/misc/pwd-long.sh: Likewise.
Many tests use `program ... && fail=1` to ensure expected
error situations are indicated. However that would mask
an unexpected exit (like a crash). Therefore explicitly
check the expected exit code.
Note where error messages are also verified, the extra
protection is not added.
* tests/init.sh (returns_): A new helper function to
check the return code of a command, and used
throughout the tests.
* cfg.mk (sc_prohibit_and_fail_1): Add a syntax check
to avoid new instances of this issue.
Run "make update-copyright" and then...
* tests/sample-test: Adjust to use the single most recent year.
* tests/du/bind-mount-dir-cycle-v2.sh: Fix case in copyright message,
so that year is updated automatically in future.
Add the --enable-single-binary option to the configure file.
When enabled, this option builds a single binary file containing
the selected tools. Which tool gets executed depends on the value
of argv[0] which can be set implicitly through symlinks to the
single program.
This setup reduces significantly the size of a complete coreutils
install, since code from lib/libcoreutils.a is not duplicated in
every one of the more than 100 binaries. Runtime overhead is
increased due to more dynamic libraries being loaded, and extra
initialization being performed for all utils. Also initially
a larger binary is loaded from storage, though this is usually
alleviated due to caching and lazy mmaping of unused blocks,
and in fact the single binary should have better caching
characteristics.
Comparing the size of the individual versus single binary on x86_64:
$ cd src
$ size coreutils
$ size -t $(../build-aux/gen-lists-of-programs.sh --list-progs |
grep -Ev '(coreutils|libstdbuf)') | tail -n1
text data bss dec hex filename
1097416 5388 88432 1191236 122d44 src/coreutils
4901010 124964 163768 5189742 4f306e (TOTALS)
Storage requirements are reduced similarly:
$ cd src
$ du -h coreutils
$ du -ch $(../build-aux/gen-lists-of-programs.sh --list-progs |
grep -Ev '(coreutils|libstdbuf)') | tail -n1
1.2M coreutils
5.3M total
When installing, the makefile will create either symlinks or
shebangs based on the --enable-single-binary setting, for
each configured tool. In this way, all the tools are still
callable individually, but they are all implemented by the same
"coreutils" binary installed on the same directory.
* .gitignore: Add new generated files.
* Makefile.am: New rules to generate build-aux/gen-single-binary.sh
and install symlinks.
* NEWS: Mention the new feature.
* README: Add "coreutils" to the list of utils.
* bootstrap.conf: Regenerate src/single-binary.mk
* build-aux/gen-lists-of-programs.sh: New --list-progs option.
* build-aux/gen-single-binary.sh: Regenerate
* configure.ac: New --enable-single-binary option and other variables.
Disallow --enable-single-binary=symlinks with --program-prefix et. al.
* man/coreutils.x: Manpage hook.
* man/local.mk: Add manpage hook and fix dependencies.
* src/coreutils.c: Multicall implementation.
* src/local.mk: New rules for the single binary option.
* tests/local.mk: Add $single_binary_progs to support
require_built_() from init.cfg
* tests/misc/env.sh: Avoid the use of symlink to echo.
* tests/misc/help-version.sh: Add exception for coreutils.
* tests/install/basic-1.sh: Really avoid using ginstall strip
functionality if there is an issue with the independent strip command.
* src/kill.c: Changes to call exit() in main.
* src/readlink.c: Likewise.
* src/shuf.c: Likewise.
* src/timeout.c: Likewise.
* src/truncate.c: Likewise.
This works for any program that might also be a shell built-in.
It is more concise. In addition, it makes output more reproducible:
some diagnostics include argv[0], which will now be just the program
name, rather than the full absolute name of the executable.
* tests/misc/sort-compress.sh: Use env kill, rather than absolute name.
* tests/install/trap.sh: Likewise.
* tests/misc/timeout.sh: Likewise.
* tests/touch/no-dereference.sh: Do the same for two uses of "test".
* tests/touch/no-create-missing.sh: Likewise.
* src/install.c (install_file_in_file_parents): Factor out the
creation of any parent directories into ...
(mkancesdirs_safe_wd): ... this new function.
(install_file_in_dir): Add the parameter 'mkdir_and_install', and
call the above new function if it evaluates to true.
(main): During parsing of the -t option, move the check whether
the target_directory exists down after the option parsing loop,
and do not complain about stat(optarg,...) failing if -D was given.
Pass 'mkdir_and_install' to install_file_in_dir().
* doc/coreutils.texi (install invocation): Remove the (false)
restriction that -D would be ignored together with -t. Instead,
clarify install's new bahavior.
Fix the node's reference in the top-level @direntry for consistency.
* src/install/basic-1.sh: Add tests for the now-allowed combination
of the -D and -t options.
* NEWS: Mention the improvement.
On most shells `:>file || framework_failure_` will not evaluate
the framework_failure_ even if there was an error writing the file.
shells which do evaluate the failure are ksh 93u+ and bash 4.2,
while shells wich don't include bash 4.3, solaris, freebsd, dash.
Furthermore this construct is problematic on Solaris 10 sh,
which will try to optimize away a `:' command in a loop
after the first iteration, even if it is redirected.
* tests/cp/link-deref.sh: Remove the leading colon on redirections.
* tests/cp/reflink-perm.sh: Likewise.
* tests/id/zero.sh: Likewise.
* tests/install/install-C.sh: Likewise.
* tests/misc/env.sh: Likewise.
* tests/misc/md5sum-bsd.sh: Likewise.
* tests/misc/runcon-no-reorder.sh: Likewise.
* tests/mv/partition-perm.sh: Likewise.
* tests/rm/r-root.sh: Likewise.
* tests/split/l-chunk.sh: Likewise.
* tests/split/line-bytes.sh: Likewise.
* tests/tail-2/inotify-rotate.sh: Likewise.
* tests/tail-2/retry.sh: Likewise.
* tests/tail-2/symlink.sh: Likewise.
* tests/tail-2/wait.sh: Likewise.
* tests/touch/read-only.sh: Likewise.
+ cfg.mk (sc_prohibit_colon_redirection): A new syntax check
to avoid further instances of this creeping in.
Run "make update-copyright", but then also run this,
perl -pi -e 's/2\d\d\d-//' tests/sample-test
to make that one script use the single most recent year number.
On OS X it was seen that the group ID used for new files,
are set to a that of the directory rather than the current user.
It's not currently understood when this happens, but it was confirmed
that ACLs, extended attributes and setgid bits are _not_ involved.
* init.cfg (skip_if_nondefault_group_): A new function to detect
and avoid this situation. Document with links to the discussions
for hopefully future clarification.
* tests/install/install-C-root.sh: Use the new function.
* tests/install/install-C-selinux.sh: Likewise.
* tests/install/install-C.sh: Likewise.
* src/install.c (strip): Indicate failure with a return code instead
of terminating the program.
(install_file_in_file): Handle strip's return code and unlink the
created file if necessary.
* tests/install/strip-program.sh: Add a test to cover the changes.
* NEWS (Bug fixes): Mention the fix.
Reported by John Reiser in http://bugzilla.redhat.com/632444.
Run "make update-copyright", but then also run this,
perl -pi -e 's/2\d\d\d-//' tests/sample-test
to make that one script use the single most recent year number.
* Makefile.am (SUBDIRS): Remove 'tests'.
(include): The '$(top_srcdir)/tests/local.mk' file.
(check-root): Remove this convenience target, it's no longer needed
now that the "real" check-root target once in 'tests/Makefile' will
land in the top-level makefile.
* configure.ac (AC_CONFIG_FILES): Remove 'tests/Makefile'.
* tests/Makefile.am: Rename ...
* tests/local.mk: ... like this, with a lot of adjustments.
* tests/init.cfg: Move ...
* init.cfg: ... here. This is necessary, for a limitation of the
gnulib-provided 'tests/init.sh', which unconditionally look for
'init.cfg' in the $(srcdir) directory.
* tests/*/*.sh: Adjust: expect init.sh to be in '$srcdir/tests',
not in '$srcdir', and extend $PATH with './src', not with '../src'.
* tests/Coreutils.pm: Adjust similarly.
* tests/pr/pr-tests.pl ($pfx): Likewise.
Not only this shrinks the size of the generated Makefile (from > 6300
lines to ~3000), but will allow further simplifications in future
changes.
* tests/Makefile.am (TEST_EXTENSIONS): Add '.sh' and '.pl'.
(PL_LOG_COMPILER, SH_LOG_COMPILER): New, still defined simply to
$(LOG_COMPILER) for the time being.
(TESTS, root_tests): Adjust as described.
* All tests: Rename as described.
Exempt init.sh because it runs before we're assured to have a
shell that groks $(...). Exempt *.mk because "$" would have to
be doubled, and besides, any `...` expression in a .mk file is
almost certainly evaluated before init.sh is run. Finally, also
exempt the perl-based tests, because perl's `...` cannot be
converted to $(...). Do that by running this command:
git grep -l '`.*`' tests \
| grep -Ev 'init\.sh|\.mk$' | xargs grep -Lw perl \
| xargs perl -pi -e 's/`(.*?)`/\$($1)/g'
One minor fix-up change was required after that, due to how
quoting differs:
diff --git a/tests/chmod/equals b/tests/chmod/equals
- expected_perms=$(eval 'echo \$expected_'$dest)
+ expected_perms=$(eval 'echo $expected_'$dest)
Another was to make these required quoting adjustments:
diff --git a/tests/misc/stty b/tests/misc/stty
...
- rev=$(eval echo "\\\$REV_$opt")
+ rev=$(eval echo "\$REV_$opt")
...
- rev1=$(eval echo "\\\$REV_$opt1")
- rev2=$(eval echo "\\\$REV_$opt2")
+ rev1=$(eval echo "\$REV_$opt1")
+ rev2=$(eval echo "\$REV_$opt2")
Also, transform two files that were needlessly excluded above:
(both use perl, but are mostly bourne shell)
perl -pi -e 's/`(.*?)`/\$($1)/g' \
tests/du/long-from-unreadable tests/init.cfg
Relax initial regexp to match more instances, but add a
filter to avoid some invalid conversions. Run this:
git grep -l "\`[^']*'" tests | xargs perl -pi -e '$q=q"'\''";' \
-e '$q="$q\\$q$q"; /(= ?\`|\`expr|\`echo|\Q$q\E)/ and next;' \
-e ' s/\`([^'\''"]*?'\'')/'\''$1/g'
The last disjunct in the above (...) filter is to exempt
any line that contains this string: '\''
With quoting like that, converting a ` to ' is likely to cause trouble,
so we'll handle those manually. Here are three examples where
the exemption is required:
*': `link-to-dir/'\'': hard link not allowed for directory'*) ;;
printf 'creating file `%s'\''\n' $f
'mv: inter-device move failed: `%s'\'' to `%s'\'';'\
Exempt lines with '$' or '=', since those are prone to improper
conversion. Run this:
git grep -l "\`[^']*'" tests \
|xargs perl -pi -e '/[=\$]/ and next;s/\`([^'\''"]*?'\'')/'\''$1/g'
These changes were mostly mechanical, made by running the
following command:
git grep -lw framework_failure | grep -v ChangeLog \
| xargs perl -pi -e 's/\b(framework_failure)\b/${1}_/'
and then editing init.cfg and `tests/cp/cp-a-selinux' by hand.
* tests/init.cfg (framework_failure): Remove, `framework_failure_'
from init.sh should be used instead in the tests.
Remove now-obsolete "FIXME" comment.
(is_local_dir_, require_strace_, require_membership_in_two_groups_,
require_sparse_support_, skip_if_mcstransd_is_running_,
mkfifo_or_skip_) Use `framework_failure_', not `framework_failure'.
* Many test scripts: Likewise.
* tests/init.cfg (skip_test_): Remove function.
Use skip_ in place of skip_test_ everywhere else.
* cfg.mk (sc_prohibit_skip_): Remove rule.
* tests/**: Use skip_, not skip_test_, everywhere.
