coreutils: keep lines within 80-column limits

* cfg.mk (LINE_LEN_MAX, FILTER_LONG_LINES): New macros.
(sc_long_lines): New rule.
* HACKING: Use shorter URLs to the same material.
* doc/Makefile.am, doc/coreutils.texi, m4/boottime.m4:
* man/help2man, man/stdbuf.x, src/Makefile.am, src/cat.c, src/copy.c:
* src/cp.c, src/dd.c, src/df.c, src/du.c, src/groups.c, src/install.c:
* src/ls.c, src/md5sum.c, src/mv.c, src/od.c, src/pinky.c, src/ptx.c:
* src/readlink.c, src/remove.c, src/rmdir.c, src/setuidgid.c:
* src/sort.c, src/tail.c, src/touch.c, tests/Coreutils.pm:
* tests/cp/existing-perm-race, tests/cp/perm, tests/cp/preserve-gid:
* tests/du/2g, tests/du/long-from-unreadable, tests/init.sh:
* tests/install/basic-1, tests/ls/nameless-uid:
* tests/ls/readdir-mountpoint-inode, tests/misc/chroot-credentials:
* tests/misc/cut, tests/misc/date, tests/misc/join, tests/misc/md5sum:
* tests/misc/sha1sum, tests/misc/sha224sum, tests/misc/sort:
* tests/misc/sort-continue, tests/misc/sort-files0-from:
* tests/misc/sort-rand, tests/misc/stdbuf, tests/misc/tr:
* tests/misc/uniq, tests/mv/atomic, tests/mv/part-fail:
* tests/mv/part-symlink, tests/mv/sticky-to-xpart, tests/pr/pr-tests:
* tests/rm/fail-2eperm, tests/rm/interactive-always:
Reformat to fit within 80 columns.
* doc/Makefile.am (BAD_POSIX_PERL): New macro.
* doc/coreutils.texi: Reword slightly, to make menus and
index lines shorter.
* src/md5sum.c: Redo --help output so that it fits within 79
columns, since that's a bit more portable and all the other --help
strings fit in 79 columns.

HACKING

@@ -439,12 +439,12 @@ The forms to choose from are in gnulib's doc/Copyright/ directory.
 If you want to assign a single change, you should use the file,
 doc/Copyright/request-assign.changes:
 
-    http://git.sv.gnu.org/gitweb/?p=gnulib.git;a=blob;f=doc/Copyright/request-assign.changes;hb=HEAD
+    http://www.gnu.org/software/gnulib/Copyright/request-assign.changes
 
 If you would like to assign past and future contributions to a project,
 you'd use doc/Copyright/request-assign.future:
 
-    http://git.sv.gnu.org/gitweb/?p=gnulib.git;a=blob;f=doc/Copyright/request-assign.future;hb=HEAD
+    http://www.gnu.org/software/gnulib/Copyright/request-assign.future
 
 You may make assignments for up to four projects at a time.
 

cfg.mk

@@ -149,6 +149,23 @@ ALL_RECURSIVE_TARGETS += sc_check-AUTHORS
 sc_check-AUTHORS:
 	@$(MAKE) -s -C src $@
 
+# Look for lines longer than 80 characters, except omit:
+# - program-generated long lines in diff headers,
+# - tests involving long checksum lines, and
+# - the 'pr' test cases.
+LINE_LEN_MAX = 80
+FILTER_LONG_LINES =						\
+  /^[^:]*\.diff:[^:]*:@@ / d;					\
+  \|^[^:]*tests/misc/sha[0-9]*sum[-:]| d;			\
+  \|^[^:]*tests/pr/|{ \|^[^:]*tests/pr/pr-tests:| !d; };
+sc_long_lines:
+	@files=$$($(VC_LIST_EXCEPT))					\
+	halt='line(s) with more than $(LINE_LEN_MAX) characters; reindent'; \
+	for file in $$files; do						\
+	  expand $$file | grep -nE '^.{$(LINE_LEN_MAX)}.' |		\
+	  sed -e "s|^|$$file:|" -e '$(FILTER_LONG_LINES)';		\
+	done | grep . && { msg="$$halt" $(_sc_say_and_exit) } || :
+
 # Option descriptions should not start with a capital letter
 # One could grep source directly as follows:
 # grep -E " {2,6}-.*[^.]  [A-Z][a-z]" $$($(VC_LIST_EXCEPT) | grep '\.c$$')
@@ -222,7 +239,8 @@ sc_prohibit_emacs__indent_tabs_mode__setting:
 	  $(_sc_search_regexp)
 
 # Ensure that each file that contains fail=1 also contains fail=0.
-# Otherwise, setting file=1 in the environment would make tests fail unexpectedly.
+# Otherwise, setting file=1 in the environment would make tests fail
+# unexpectedly.
 sc_prohibit_fail_0:
 	@prohibit='\<fail=0\>'						\
 	halt='fail=0 initialization'					\

doc/Makefile.am

@@ -33,7 +33,8 @@ constants.texi: $(top_srcdir)/src/tail.c $(top_srcdir)/src/shred.c
 	$(AM_V_GEN)LC_ALL=C; export LC_ALL; \
 	{ sed -n -e 's/^#define \(DEFAULT_MAX[_A-Z]*\) \(.*\)/@set \1 \2/p' \
 	    $(top_srcdir)/src/tail.c && \
-	  sed -n -e 's/.*\(DEFAULT_PASSES\)[ =]* \([0-9]*\).*/@set SHRED_\1 \2/p'\
+	  sed -n -e \
+	      's/.*\(DEFAULT_PASSES\)[ =]* \([0-9]*\).*/@set SHRED_\1 \2/p'\
 	    $(top_srcdir)/src/shred.c; } > t-$@ \
 	  && mv t-$@ $@
 
@@ -60,6 +61,7 @@ syntax_checks =		\
 .PHONY: $(syntax_checks) check-texinfo
 
 # List words/regexps here that should not appear in the texinfo documentation.
+BAD_POSIX_PERL = /\bPOSIX\b/ && !/\@acronym{POSIX}/ && !/^\* / || /{posix}/
 check-texinfo: $(syntax_checks)
 	$(AM_V_GEN)fail=0;						\
 	grep '@url{' $(srcdir)/*.texi && fail=1;			\
@@ -69,7 +71,7 @@ check-texinfo: $(syntax_checks)
 	    | $(EGREP) -v 'setfilename|[{]filename[}]'			\
 	  && fail=1;							\
 	$(PERL) -e 1 2> /dev/null && { $(PERL) -ne			\
-	  '/\bPOSIX\b/ && !/\@acronym{POSIX}/ && !/^\* / || /{posix}/ and print,exit 1' \
+	  '$(BAD_POSIX_PERL) and print,exit 1'				\
 	  $(srcdir)/*.texi 2> /dev/null || fail=1; };			\
 	exit $$fail
 
@@ -108,7 +110,8 @@ sc-avoid-non-zero:
 
 # Use `zeros', not `zeroes' (nothing wrong with `zeroes'. just be consistent).
 sc-avoid-zeroes:
-	$(AM_V_GEN)$(EGREP) -i '$(_W)zeroes$(W_)' $(srcdir)/*.texi && exit 1 || :
+	$(AM_V_GEN)$(EGREP) -i '$(_W)zeroes$(W_)' $(srcdir)/*.texi \
+	  && exit 1 || :
 
 # ME = $(subdir)/$(word $(words $(MAKEFILE_LIST)),$(MAKEFILE_LIST))
 ME = doc/Makefile

doc/coreutils.texi

@@ -736,7 +736,7 @@ name.
 * Trailing slashes::            --strip-trailing-slashes, in some programs.
 * Traversing symlinks::         -H, -L, or -P, in some programs.
 * Treating / specially::        --preserve-root and --no-preserve-root.
-* Special built-in utilities::  @command{break}, @command{:}, @command{eval}, @dots{}
+* Special built-in utilities::  @command{break}, @command{:}, @dots{}
 * Standards conformance::       Conformance to the @acronym{POSIX} standard.
 @end menu
 
@@ -1316,7 +1316,7 @@ a symlink or its referent.
 @macro choptH
 @item -H
 @opindex -H
-@cindex symbolic link to directory, traverse each that is specified on the command line
+@cindex symbolic link to directory, traverse if on the command line
 If @option{--recursive} (@option{-R}) is specified and
 a command line argument is a symbolic link to a directory, traverse it.
 @end macro
@@ -1778,7 +1778,8 @@ Synopses:
 @smallexample
 od [@var{option}]@dots{} [@var{file}]@dots{}
 od [-abcdfilosx]@dots{} [@var{file}] [[+]@var{offset}[.][b]]
-od [@var{option}]@dots{} --traditional [@var{file}] [[+]@var{offset}[.][b] [[+]@var{label}[.][b]]]
+od [@var{option}]@dots{} --traditional [@var{file}]@c
+ [[+]@var{offset}[.][b] [[+]@var{label}[.][b]]]
 @end smallexample
 
 Each line of output consists of the offset in the input, followed by
@@ -3408,10 +3409,11 @@ length limitation.
 In such cases, running @command{\cmd\} via @command{xargs} is undesirable
 because it splits the list into pieces and makes @command{\cmd\} print
 \subListOutput\ for each sublist rather than for the entire list.
-One way to produce a list of @acronym{ASCII} @sc{nul} terminated file names is with @sc{gnu}
+One way to produce a list of @acronym{ASCII} @sc{nul} terminated file
+names is with @sc{gnu}
 @command{find}, using its @option{-print0} predicate.
-If @var{file} is @samp{-} then the @acronym{ASCII} @sc{nul} terminated file names
+If @var{file} is @samp{-} then the @acronym{ASCII} @sc{nul} terminated
-are read from standard input.
+file names are read from standard input.
 @end macro
 @filesZeroFromOption{wc,,a total}
 
@@ -4234,7 +4236,8 @@ or other special characters).
 
 Historical (BSD and System V) implementations of @command{sort} have
 differed in their interpretation of some options, particularly
-@option{-b}, @option{-f}, and @option{-n}.  @sc{gnu} sort follows the @acronym{POSIX}
+@option{-b}, @option{-f}, and @option{-n}.
+@sc{gnu} sort follows the @acronym{POSIX}
 behavior, which is usually (but not always!) like the System V behavior.
 According to @acronym{POSIX}, @option{-n} no longer implies @option{-b}.  For
 consistency, @option{-M} has been changed in the same way.  This may
@@ -4404,7 +4407,10 @@ by the sort operation.
 @c and converting each @samp{\0} back to the original record delimiter.
 @c
 @c @example
-@c printf 'c\n\nb\n\na\n'|perl -0pe 's/\n\n/\n\0/g'|sort -z|perl -0pe 's/\0/\n/g'
+@c printf 'c\n\nb\n\na\n' |
+@c perl -0pe 's/\n\n/\n\0/g' |
+@c sort -z |
+@c perl -0pe 's/\0/\n/g'
 @c @end example
 
 @item
@@ -5118,7 +5124,8 @@ Choose an output format suitable for @command{nroff} or @command{troff}
 processing.  Each output line will look like:
 
 @smallexample
-.xx "@var{tail}" "@var{before}" "@var{keyword_and_after}" "@var{head}" "@var{ref}"
+.xx "@var{tail}" "@var{before}" "@var{keyword_and_after}"@c
+ "@var{head}" "@var{ref}"
 @end smallexample
 
 so it will be possible to write a @samp{.xx} roff macro to take care of
@@ -5138,7 +5145,8 @@ Choose an output format suitable for @TeX{} processing.  Each output
 line will look like:
 
 @smallexample
-\xx @{@var{tail}@}@{@var{before}@}@{@var{keyword}@}@{@var{after}@}@{@var{head}@}@{@var{ref}@}
+\xx @{@var{tail}@}@{@var{before}@}@{@var{keyword}@}@c
+@{@var{after}@}@{@var{head}@}@{@var{ref}@}
 @end smallexample
 
 @noindent
@@ -6017,7 +6025,8 @@ newlines.
 @noindent
 By the way, the above idiom is not portable because it uses ranges, and
 it assumes that the octal code for newline is 012.
-Assuming a @acronym{POSIX} compliant @command{tr}, here is a better way to write it:
+Assuming a @acronym{POSIX} compliant @command{tr}, here is a better
+way to write it:
 
 @example
 tr -cs '[:alnum:]' '[\n*]'
@@ -8454,7 +8463,8 @@ response is not affirmative, the file is skipped.
 when it might be a symlink to a directory.
 Otherwise, @command{mv} may do something very surprising, since
 its behavior depends on the underlying rename system call.
-On a system with a modern Linux-based kernel, it fails with @code{errno=ENOTDIR}.
+On a system with a modern Linux-based kernel, it fails with
+@code{errno=ENOTDIR}.
 However, on other systems (at least FreeBSD 6.1 and Solaris 10) it silently
 renames not the symlink but rather the directory referenced by the symlink.
 @xref{Trailing slashes}.
@@ -8845,7 +8855,8 @@ Display to standard error all status updates as sterilization proceeds.
 @opindex -x
 @opindex --exact
 By default, @command{shred} rounds the size of a regular file up to the next
-multiple of the file system block size to fully erase the last block of the file.
+multiple of the file system block size to fully erase the last block
+of the file.
 Use @option{--exact} to suppress that behavior.
 Thus, by default if you shred a 10-byte regular file on a system with 512-byte
 blocks, the resulting file will be 512 bytes long.  With this option,
@@ -9628,7 +9639,8 @@ to @var{new-owner} or to the user and group of an existing reference file.
 Synopsis:
 
 @example
-chown [@var{option}]@dots{} @{@var{new-owner} | --reference=@var{ref_file}@} @var{file}@dots{}
+chown [@var{option}]@dots{} @{@var{new-owner} | --reference=@var{ref_file}@}@c
+ @var{file}@dots{}
 @end example
 
 If used, @var{new-owner} specifies the new owner and/or group as follows
@@ -9843,7 +9855,8 @@ to @var{group} (which can be either a group name or a numeric group ID)
 or to the group of an existing reference file.  Synopsis:
 
 @example
-chgrp [@var{option}]@dots{} @{@var{group} | --reference=@var{ref_file}@} @var{file}@dots{}
+chgrp [@var{option}]@dots{} @{@var{group} | --reference=@var{ref_file}@}@c
+ @var{file}@dots{}
 @end example
 
 If @var{group} is intended to represent a
@@ -9964,7 +9977,8 @@ chgrp -hR staff /u
 @command{chmod} changes the access permissions of the named files.  Synopsis:
 
 @example
-chmod [@var{option}]@dots{} @{@var{mode} | --reference=@var{ref_file}@} @var{file}@dots{}
+chmod [@var{option}]@dots{} @{@var{mode} | --reference=@var{ref_file}@}@c
+ @var{file}@dots{}
 @end example
 
 @cindex symbolic links, permissions of
@@ -10264,7 +10278,8 @@ Non-integer quantities are rounded up to the next higher unit.
 If an argument @var{file} is a disk device file containing a mounted
 file system, @command{df} shows the space available on that file system
 rather than on the file system containing the device node (i.e., the root
-file system).  @sc{gnu} @command{df} does not attempt to determine the disk usage
+file system).  @sc{gnu} @command{df} does not attempt to determine the
+disk usage
 on unmounted file systems, because on most kinds of systems doing so
 requires extremely nonportable intimate knowledge of file system
 structures.
@@ -11390,7 +11405,8 @@ test
 
 If @var{expression} is omitted, @command{test} returns false.
 If @var{expression} is a single argument,
-@command{test} returns false if the argument is null and true otherwise.  The argument
+@command{test} returns false if the argument is null and true
+otherwise.  The argument
 can be any string, including strings like @samp{-d}, @samp{-1},
 @samp{--}, @samp{--help}, and @samp{--version} that most other
 programs would treat as options.  To get help and version information,
@@ -12586,8 +12602,9 @@ be used in combination with any line settings.
 @opindex --file
 Set the line opened by the file name specified in @var{device} instead of
 the tty line connected to standard input.  This option is necessary
-because opening a @acronym{POSIX} tty requires use of the @code{O_NONDELAY} flag to
+because opening a @acronym{POSIX} tty requires use of the
-prevent a @acronym{POSIX} tty from blocking until the carrier detect line is high if
+@code{O_NONDELAY} flag to prevent a @acronym{POSIX} tty from blocking
+until the carrier detect line is high if
 the @code{clocal} flag is not set.  Hence, it is not always possible
 to allow the shell to open the device in the traditional manner.
 
@@ -12609,8 +12626,9 @@ case, that is, when @emph{not} negated (unless stated otherwise,
 of course).
 
 Some settings are not available on all @acronym{POSIX} systems, since they use
-extensions.  Such arguments are marked below with ``Non-@acronym{POSIX}'' in their
+extensions.  Such arguments are marked below with
-description.  On non-@acronym{POSIX} systems, those or other settings also may not
+``Non-@acronym{POSIX}'' in their description.  On non-@acronym{POSIX}
+systems, those or other settings also may not
 be available, but it's not feasible to document all the variations: just
 try it and see.
 
@@ -12817,7 +12835,8 @@ Newline performs a carriage return.  Non-@acronym{POSIX}.  May be negated.
 @item ofill
 @opindex ofill
 @cindex pad instead of timing for delaying
-Use fill (padding) characters instead of timing for delays.  Non-@acronym{POSIX}.
+Use fill (padding) characters instead of timing for delays.
+Non-@acronym{POSIX}.
 May be negated.
 
 @item ofdel
@@ -12945,7 +12964,8 @@ of literally.  Non-@acronym{POSIX}.  May be negated.
 @opindex crtkill
 Echo the @code{kill} special character by erasing each character on
 the line as indicated by the @code{echoprt} and @code{echoe} settings,
-instead of by the @code{echoctl} and @code{echok} settings.  Non-@acronym{POSIX}.
+instead of by the @code{echoctl} and @code{echok} settings.
+Non-@acronym{POSIX}.
 May be negated.
 @end table
 
@@ -13169,7 +13189,8 @@ Set the output speed to @var{n}.
 
 @item rows @var{n}
 @opindex rows
-Tell the tty kernel driver that the terminal has @var{n} rows.  Non-@acronym{POSIX}.
+Tell the tty kernel driver that the terminal has @var{n} rows.
+Non-@acronym{POSIX}.
 
 @item cols @var{n}
 @itemx columns @var{n}
@@ -14386,7 +14407,8 @@ parsed reliably.  In the following example, @var{release} is
 
 @smallexample
 uname -a
-@result{} Linux dum 2.2.18 #4 SMP Tue Jun 5 11:24:08 PDT 2001 i686 unknown unknown GNU/Linux
+@result{} Linux dum 2.2.18 #4 SMP Tue Jun 5 11:24:08 PDT 2001 i686@c
+ unknown unknown GNU/Linux
 @end smallexample
 
 
@@ -14592,7 +14614,8 @@ Synopses:
 
 @smallexample
 chcon [@var{option}]@dots{} @var{context} @var{file}@dots{}
-chcon [@var{option}]@dots{} [-u @var{user}] [-r @var{role}] [-l @var{range}] [-t @var{type}] @var{file}@dots{}
+chcon [@var{option}]@dots{} [-u @var{user}] [-r @var{role}] [-l @var{range}]@c
+ [-t @var{type}] @var{file}@dots{}
 chcon [@var{option}]@dots{} --reference=@var{rfile} @var{file}@dots{}
 @end smallexample
 
@@ -14678,7 +14701,8 @@ Set range @var{range} in the target security context.
 Synopses:
 @smallexample
 runcon @var{context} @var{command} [@var{args}]
-runcon [ -c ] [-u @var{user}] [-r @var{role}] [-t @var{type}] [-l @var{range}] @var{command} [@var{args}]
+runcon [ -c ] [-u @var{user}] [-r @var{role}] [-t @var{type}]@c
+ [-l @var{range}] @var{command} [@var{args}]
 @end smallexample
 
 Run @var{command} with completely-specified @var{context}, or with
@@ -14690,7 +14714,8 @@ is specified, the first argument is used as the complete context.
 Any additional arguments after @var{command}
 are interpreted as arguments to the command.
 
-With neither @var{context} nor @var{command}, print the current security context.
+With neither @var{context} nor @var{command}, print the current
+security context.
 
 The program accepts the following options.  Also see @ref{Common options}.
 
@@ -15853,7 +15878,8 @@ It was written by Arnold Robbins.
 @unnumberedsec Toolbox Introduction
 
 This month's column is only peripherally related to the GNU Project, in
-that it describes a number of the GNU tools on your GNU/Linux system and how they
+that it describes a number of the GNU tools on your GNU/Linux system
+and how they
 might be used.  What it's really about is the ``Software Tools'' philosophy
 of program development and usage.
 
@@ -16053,7 +16079,8 @@ by a count of the number of times that line occurred in the input.
 @unnumberedsec Putting the Tools Together
 
 Now, let's suppose this is a large ISP server system with dozens of users
-logged in.  The management wants the system administrator to write a program that will
+logged in.  The management wants the system administrator to write a
+program that will
 generate a sorted list of logged in users.  Furthermore, even if a user
 is logged in multiple times, his or her name should only show up in the
 output once.
@@ -16095,7 +16122,8 @@ The @command{sort} command actually has a @option{-u} option that does what
 @command{uniq} does.  However, @command{uniq} has other uses for which one
 cannot substitute @samp{sort -u}.
 
-The administrator puts this pipeline into a shell script, and makes it available for
+The administrator puts this pipeline into a shell script, and makes it
+available for
 all the users on the system (@samp{#} is the system administrator,
 or @code{root}, prompt):
 

m4/boottime.m4

@@ -52,7 +52,9 @@ AC_DEFUN([GNULIB_BOOT_TIME],
 #endif
 ],
 [[
-#if defined BOOT_TIME || (defined CTL_KERN && defined KERN_BOOTTIME) || HAVE_OS_H
+#if (defined BOOT_TIME                              \
+     || (defined CTL_KERN && defined KERN_BOOTTIME) \
+     || HAVE_OS_H)
 /* your system *does* have the infrastructure to determine boot time */
 #else
 please_tell_us_how_to_determine_boot_time_on_your_system

man/help2man

@@ -316,7 +316,10 @@ unless ($manual)
 # Extract usage clause(s) [if any] for SYNOPSIS.
 my $PAT_USAGE = _('Usage');
 my $PAT_USAGE_CONT = _('or');
-if ($help_text =~ s/^($PAT_USAGE):( +(\S+))(.*)((?:\n(?: {6}\1| *($PAT_USAGE_CONT): +\S).*)*)//om)
+if ($help_text =~ s/^($PAT_USAGE):
+                     ([ ]+(\S+))
+                     (.*)
+                     ((?:\n(?:[ ]{6}\1|[ ]*($PAT_USAGE_CONT):[ ]+\S).*)*)//omx)
 {
     my @syn = $3 . $4;
 

man/stdbuf.x

@@ -4,7 +4,8 @@
 '\" of the GNU General Public License <http://www.gnu.org/licenses/gpl.html>.
 '\" There is NO WARRANTY, to the extent permitted by law.
 [NAME]
-stdbuf \- Run COMMAND, with modified buffering operations for its standard streams.
+stdbuf \-
+Run COMMAND, with modified buffering operations for its standard streams.
 [DESCRIPTION]
 .\" Add any additional description here
 [EXAMPLES]

src/cat.c

@@ -323,7 +323,8 @@ cat (
                     use_fionread = false;
                   else
                     {
-                      error (0, errno, _("cannot do ioctl on %s"), quote (infile));
+                      error (0, errno, _("cannot do ioctl on %s"),
+                             quote (infile));
                       newlines2 = newlines;
                       return false;
                     }

src/copy.c

@@ -354,7 +354,8 @@ set_owner (const struct cp_options *x, char const *dst_name, int dest_desc,
           && qset_acl (dst_name, dest_desc, restrictive_temp_mode) != 0)
         {
           if (! owner_failure_ok (x))
-            error (0, errno, _("clearing permissions for %s"), quote (dst_name));
+            error (0, errno, _("clearing permissions for %s"),
+                   quote (dst_name));
           return -x->require_preserve;
         }
     }

src/cp.c

@@ -170,16 +170,19 @@ Mandatory arguments to long options are mandatory for short options too.\n\
       fputs (_("\
   -a, --archive                same as -dR --preserve=all\n\
       --attributes-only        don't copy the file data, just the attributes\n\
-      --backup[=CONTROL]       make a backup of each existing destination file\n\
+      --backup[=CONTROL]       make a backup of each existing destination file\
+\n\
   -b                           like --backup but does not accept an argument\n\
       --copy-contents          copy contents of special files when recursive\n\
   -d                           same as --no-dereference --preserve=links\n\
 "), stdout);
       fputs (_("\
   -f, --force                  if an existing destination file cannot be\n\
-                                 opened, remove it and try again (redundant if\n\
+                                 opened, remove it and try again (redundant if\
+\n\
                                  the -n option is used)\n\
-  -i, --interactive            prompt before overwrite (overrides a previous -n\n\
+  -i, --interactive            prompt before overwrite (overrides a previous -n\
+\n\
                                   option)\n\
   -H                           follow command-line symbolic links in SOURCE\n\
 "), stdout);
@@ -196,7 +199,8 @@ Mandatory arguments to long options are mandatory for short options too.\n\
   -p                           same as --preserve=mode,ownership,timestamps\n\
       --preserve[=ATTR_LIST]   preserve the specified attributes (default:\n\
                                  mode,ownership,timestamps), if possible\n\
-                                 additional attributes: context, links, xattr,\n\
+                                 additional attributes: context, links, xattr,\
+\n\
                                  all\n\
 "), stdout);
       fputs (_("\
@@ -207,8 +211,8 @@ Mandatory arguments to long options are mandatory for short options too.\n\
   -R, -r, --recursive          copy directories recursively\n\
       --reflink[=WHEN]         control clone/CoW copies. See below\n\
       --remove-destination     remove each existing destination file before\n\
-                                 attempting to open it (contrast with --force)\n\
+                                 attempting to open it (contrast with --force)\
-"), stdout);
+\n"), stdout);
       fputs (_("\
       --sparse=WHEN            control creation of sparse files. See below\n\
       --strip-trailing-slashes  remove any trailing slashes from each SOURCE\n\
@@ -948,7 +952,8 @@ main (int argc, char **argv)
                                        reflink_type_string, reflink_type);
           break;
 
-        case 'a':		/* Like -dR --preserve=all with reduced failure diagnostics. */
+        case 'a':
+          /* Like -dR --preserve=all with reduced failure diagnostics.  */
           x.dereference = DEREF_NEVER;
           x.preserve_links = true;
           x.preserve_ownership = true;

src/dd.c

@@ -1939,7 +1939,8 @@ main (int argc, char **argv)
                   || S_ISDIR (stdout_stat.st_mode)
                   || S_TYPEISSHM (&stdout_stat))
                 error (EXIT_FAILURE, ftruncate_errno,
-                   _("failed to truncate to %"PRIuMAX" bytes in output file %s"),
+                       _("failed to truncate to %"PRIuMAX" bytes"
+                         " in output file %s"),
                        size, quote (output_file));
             }
         }

src/df.c

@@ -715,14 +715,16 @@ Mandatory arguments to long options are mandatory for short options too.\n\
                            `-BM' prints sizes in units of 1,048,576 bytes.\n\
                            See SIZE format below.\n\
       --total           produce a grand total\n\
-  -h, --human-readable  print sizes in human readable format (e.g., 1K 234M 2G)\n\
+  -h, --human-readable  print sizes in human readable format (e.g., 1K 234M 2G)\
+\n\
   -H, --si              likewise, but use powers of 1000 not 1024\n\
 "), stdout);
       fputs (_("\
   -i, --inodes          list inode information instead of block usage\n\
   -k                    like --block-size=1K\n\
   -l, --local           limit listing to local file systems\n\
-      --no-sync         do not invoke sync before getting usage info (default)\n\
+      --no-sync         do not invoke sync before getting usage info (default)\
+\n\
 "), stdout);
       fputs (_("\
   -P, --portability     use the POSIX output format\n\

src/du.c

@@ -267,7 +267,8 @@ Mandatory arguments to long options are mandatory for short options too.\n\
 "), stdout);
       fputs (_("\
   -a, --all             write counts for all files, not just directories\n\
-      --apparent-size   print apparent sizes, rather than disk usage; although\n\
+      --apparent-size   print apparent sizes, rather than disk usage; although\
+\n\
                           the apparent size is usually smaller, it may be\n\
                           larger due to holes in (`sparse') files, internal\n\
                           fragmentation, indirect blocks, and the like\n\
@@ -286,7 +287,8 @@ Mandatory arguments to long options are mandatory for short options too.\n\
                           names specified in file F;\n\
                           If F is - then read names from standard input\n\
   -H                    equivalent to --dereference-args (-D)\n\
-  -h, --human-readable  print sizes in human readable format (e.g., 1K 234M 2G)\n\
+  -h, --human-readable  print sizes in human readable format (e.g., 1K 234M 2G)\
+\n\
       --si              like -h, but use powers of 1000 not 1024\n\
 "), stdout);
       fputs (_("\

src/groups.c

@@ -53,7 +53,8 @@ usage (int status)
     {
       printf (_("Usage: %s [OPTION]... [USERNAME]...\n"), program_name);
       fputs (_("\
-Print group memberships for each USERNAME or, if no USERNAME is specified, for\n\
+Print group memberships for each USERNAME or, if no USERNAME is specified, for\
+\n\
 the current process (which may differ if the groups database has changed).\n"),
              stdout);
       fputs (HELP_OPTION_DESCRIPTION, stdout);

src/install.c

@@ -986,7 +986,8 @@ Mandatory arguments to long options are mandatory for short options too.\n\
 "), stdout);
       fputs (_("\
       --preserve-context  preserve SELinux security context\n\
-  -Z, --context=CONTEXT  set SELinux security context of files and directories\n\
+  -Z, --context=CONTEXT  set SELinux security context of files and directories\
+\n\
 "), stdout);
 
       fputs (HELP_OPTION_DESCRIPTION, stdout);

src/ls.c

@@ -2048,7 +2048,8 @@ decode_switches (int argc, char **argv)
               }
           }
       /* Note we leave %5b etc. alone so user widths/flags are honored.  */
-      if (strstr (long_time_format[0],"%b") || strstr (long_time_format[1],"%b"))
+      if (strstr (long_time_format[0], "%b")
+          || strstr (long_time_format[1], "%b"))
         if (!abmon_init ())
           error (0, 0, _("error initializing month strings"));
     }
@@ -4628,15 +4629,18 @@ Mandatory arguments to long options are mandatory for short options too.\n\
       --dereference-command-line-symlink-to-dir\n\
                              follow each command line symbolic link\n\
                              that points to a directory\n\
-      --hide=PATTERN         do not list implied entries matching shell PATTERN\n\
+      --hide=PATTERN         do not list implied entries matching shell PATTERN\
+\n\
                                (overridden by -a or -A)\n\
 "), stdout);
       fputs (_("\
-      --indicator-style=WORD  append indicator with style WORD to entry names:\n\
+      --indicator-style=WORD  append indicator with style WORD to entry names:\
+\n\
                                none (default), slash (-p),\n\
                                file-type (--file-type), classify (-F)\n\
   -i, --inode                print the index number of each file\n\
-  -I, --ignore=PATTERN       do not list implied entries matching shell PATTERN\n\
+  -I, --ignore=PATTERN       do not list implied entries matching shell PATTERN\
+\n\
   -k                         like --block-size=1K\n\
 "), stdout);
       fputs (_("\
@@ -4644,7 +4648,8 @@ Mandatory arguments to long options are mandatory for short options too.\n\
   -L, --dereference          when showing file information for a symbolic\n\
                                link, show information for the file the link\n\
                                references rather than for the link itself\n\
-  -m                         fill width with a comma separated list of entries\n\
+  -m                         fill width with a comma separated list of entries\
+\n\
 "), stdout);
       fputs (_("\
   -n, --numeric-uid-gid      like -l, but list numeric user and group IDs\n\
@@ -4660,7 +4665,8 @@ Mandatory arguments to long options are mandatory for short options too.\n\
                              unless program is `ls' and output is a terminal)\n\
   -Q, --quote-name           enclose entry names in double quotes\n\
       --quoting-style=WORD   use quoting style WORD for entry names:\n\
-                               literal, locale, shell, shell-always, c, escape\n\
+                               literal, locale, shell, shell-always, c, escape\
+\n\
 "), stdout);
       fputs (_("\
   -r, --reverse              reverse order while sorting\n\
@@ -4671,7 +4677,8 @@ Mandatory arguments to long options are mandatory for short options too.\n\
   -S                         sort by file size\n\
       --sort=WORD            sort by WORD instead of name: none -U,\n\
                              extension -X, size -S, time -t, version -v\n\
-      --time=WORD            with -l, show time as WORD instead of modification\n\
+      --time=WORD            with -l, show time as WORD instead of modification\
+\n\
                              time: atime -u, access -u, use -u, ctime -c,\n\
                              or status -c; use specified time as sort key\n\
                              if --sort=time\n\

src/md5sum.c

@@ -1,4 +1,4 @@
-/* Compute MD5, SHA1, SHA224, SHA256, SHA384 or SHA512 checksum of files or strings
+/* Compute checksums of files or strings.
    Copyright (C) 1995-2010 Free Software Foundation, Inc.
 
    This program is free software: you can redistribute it and/or modify
@@ -209,7 +209,8 @@ text), and name for each FILE.\n"),
    name.  S is modified.  Return true if successful.  */
 
 static bool
-bsd_split_3 (char *s, size_t s_len, unsigned char **hex_digest, char **file_name)
+bsd_split_3 (char *s, size_t s_len, unsigned char **hex_digest,
+             char **file_name)
 {
   size_t i;
 
@@ -576,23 +577,26 @@ digest_check (const char *checkfile_name)
         {
           if (n_misformatted_lines != 0)
             error (0, 0,
-                   ngettext ("WARNING: %" PRIuMAX " line is improperly formatted",
+                   (ngettext
+                    ("WARNING: %" PRIuMAX " line is improperly formatted",
                      "WARNING: %" PRIuMAX " lines are improperly formatted",
-                             select_plural (n_misformatted_lines)),
+                     select_plural (n_misformatted_lines))),
                    n_misformatted_lines);
 
           if (n_open_or_read_failures != 0)
             error (0, 0,
-                   ngettext ("WARNING: %" PRIuMAX " listed file could not be read",
+                   (ngettext
+                    ("WARNING: %" PRIuMAX " listed file could not be read",
                      "WARNING: %" PRIuMAX " listed files could not be read",
-                             select_plural (n_open_or_read_failures)),
+                     select_plural (n_open_or_read_failures))),
                    n_open_or_read_failures);
 
           if (n_mismatched_checksums != 0)
             error (0, 0,
-                   ngettext ("WARNING: %" PRIuMAX " computed checksum did NOT match",
+                   (ngettext
+                    ("WARNING: %" PRIuMAX " computed checksum did NOT match",
                      "WARNING: %" PRIuMAX " computed checksums did NOT match",
-                             select_plural (n_mismatched_checksums)),
+                     select_plural (n_mismatched_checksums))),
                    n_mismatched_checksums);
         }
     }

src/mv.c

@@ -296,7 +296,8 @@ Rename SOURCE to DEST, or move SOURCE(s) to DIRECTORY.\n\
 Mandatory arguments to long options are mandatory for short options too.\n\
 "), stdout);
       fputs (_("\
-      --backup[=CONTROL]       make a backup of each existing destination file\n\
+      --backup[=CONTROL]       make a backup of each existing destination file\
+\n\
   -b                           like --backup but does not accept an argument\n\
   -f, --force                  do not prompt before overwriting\n\
   -i, --interactive            prompt before overwrite\n\

src/od.c

@@ -374,7 +374,8 @@ RADIX is d for decimal, o for octal, x for hexadecimal or n for none.\n\
 BYTES is hexadecimal with 0x or 0X prefix, and may have a multiplier suffix:\n\
 b 512, kB 1000, K 1024, MB 1000*1000, M 1024*1024,\n\
 GB 1000*1000*1000, G 1024*1024*1024, and so on for T, P, E, Z, Y.\n\
-Adding a z suffix to any type displays printable characters at the end of each\n\
+Adding a z suffix to any type displays printable characters at the end of each\
+\n\
 output line.\n\
 "), stdout);
       fputs (_("\
@@ -1046,7 +1047,8 @@ skip (uintmax_t n_skip)
 }
 
 static void
-format_address_none (uintmax_t address ATTRIBUTE_UNUSED, char c ATTRIBUTE_UNUSED)
+format_address_none (uintmax_t address ATTRIBUTE_UNUSED,
+                     char c ATTRIBUTE_UNUSED)
 {
 }
 

src/pinky.c

@@ -220,7 +220,7 @@ print_entry (const STRUCT_UTMP *utmp_ent)
   else
     {
       strcpy (line, DEV_DIR_WITH_TRAILING_SLASH);
-      strncpy (line + DEV_DIR_LEN, utmp_ent->ut_line, sizeof (utmp_ent->ut_line));
+      strncpy (line + DEV_DIR_LEN, utmp_ent->ut_line, sizeof utmp_ent->ut_line);
       line[DEV_DIR_LEN + sizeof (utmp_ent->ut_line)] = '\0';
     }
 

src/ptx.c

@@ -89,7 +89,7 @@ static enum Format output_format = UNKNOWN_FORMAT;
                                 /* output format */
 
 static bool ignore_case = false;	/* fold lower to upper for sorting */
-static const char *break_file = NULL;	/* name of the `Break characters' file */
+static const char *break_file = NULL;	/* name of the `Break chars' file */
 static const char *only_file = NULL;	/* name of the `Only words' file */
 static const char *ignore_file = NULL;	/* name of the `Ignore words' file */
 
@@ -254,7 +254,7 @@ static char edited_flag[CHAR_SET_SIZE];
 static int half_line_width;	/* half of line width, reference excluded */
 static int before_max_width;	/* maximum width of before field */
 static int keyafter_max_width;	/* maximum width of keyword-and-after field */
-static int truncation_string_length;/* length of string used to flag truncation */
+static int truncation_string_length;/* length of string that flags truncation */
 
 /* When context is limited by lines, wraparound may happen on final output:
    the `head' pointer gives access to some supplementary left context which
@@ -1019,7 +1019,8 @@ find_occurs_in_text (void)
                   < occurs_alloc[0])
                 xalloc_die ();
               occurs_alloc[0] = occurs_alloc[0] * 2 + 1;
-              occurs_table[0] = xrealloc (occurs_table[0],
+              occurs_table[0] =
+                xrealloc (occurs_table[0],
                           occurs_alloc[0] * sizeof *occurs_table[0]);
             }
 

src/readlink.c

@@ -65,15 +65,18 @@ usage (int status)
              stdout);
       fputs (_("\
   -f, --canonicalize            canonicalize by following every symlink in\n\
-                                every component of the given name recursively;\n\
+                                every component of the given name recursively;\
+\n\
                                 all but the last component must exist\n\
   -e, --canonicalize-existing   canonicalize by following every symlink in\n\
-                                every component of the given name recursively,\n\
+                                every component of the given name recursively,\
+\n\
                                 all components must exist\n\
 "), stdout);
       fputs (_("\
   -m, --canonicalize-missing    canonicalize by following every symlink in\n\
-                                every component of the given name recursively,\n\
+                                every component of the given name recursively,\
+\n\
                                 without requirements on components existence\n\
   -n, --no-newline              do not output the trailing newline\n\
   -q, --quiet,\n\

src/remove.c

@@ -14,7 +14,7 @@
    You should have received a copy of the GNU General Public License
    along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
 
-/* Extracted from rm.c and librarified, then rewritten twice by Jim Meyering.  */
+/* Extracted from rm.c, librarified, then rewritten twice by Jim Meyering.  */
 
 #include <config.h>
 #include <stdio.h>

src/rmdir.c

@@ -171,7 +171,8 @@ Remove the DIRECTORY(ies), if they are empty.\n\
                     is non-empty\n\
 "), stdout);
       fputs (_("\
-  -p, --parents   remove DIRECTORY and its ancestors; e.g., `rmdir -p a/b/c' is\n\
+  -p, --parents   remove DIRECTORY and its ancestors; e.g., `rmdir -p a/b/c' is\
+\n\
                     similar to `rmdir a/b/c a/b a'\n\
   -v, --verbose   output a diagnostic for every directory processed\n\
 "), stdout);

src/setuidgid.c

@@ -54,7 +54,8 @@ Usage: %s [SHORT-OPTION]... USER COMMAND [ARGUMENT]...\n\
               program_name, program_name);
 
       fputs (_("\
-Drop any supplemental groups, assume the user-ID and group-ID of the specified\n\
+Drop any supplemental groups, assume the user-ID and group-ID of the specified\
+\n\
 USER (numeric ID or user name), and run COMMAND with any specified ARGUMENTs.\n\
 Exit with status 111 if unable to assume the required user and group ID.\n\
 Otherwise, exit with the exit status of COMMAND.\n\

src/sort.c

@@ -400,7 +400,8 @@ Ordering options:\n\
 "), stdout);
       fputs (_("\
   -b, --ignore-leading-blanks  ignore leading blanks\n\
-  -d, --dictionary-order      consider only blanks and alphanumeric characters\n\
+  -d, --dictionary-order      consider only blanks and alphanumeric characters\
+\n\
   -f, --ignore-case           fold lower case to upper case characters\n\
 "), stdout);
       fputs (_("\
@@ -419,7 +420,8 @@ Ordering options:\n\
 "), stdout);
       fputs (_("\
       --sort=WORD             sort according to WORD:\n\
-                                general-numeric -g, human-numeric -h, month -M,\n\
+                                general-numeric -g, human-numeric -h, month -M,\
+\n\
                                 numeric -n, random -R, version -V\n\
   -V, --version-sort          natural sort of (version) numbers within text\n\
 \n\
@@ -434,7 +436,8 @@ Other options:\n\
 "), stdout);
       fputs (_("\
   -c, --check, --check=diagnose-first  check for sorted input; do not sort\n\
-  -C, --check=quiet, --check=silent  like -c, but do not report first bad line\n\
+  -C, --check=quiet, --check=silent  like -c, but do not report first bad line\
+\n\
       --compress-program=PROG  compress temporaries with PROG;\n\
                               decompress them with PROG -d\n\
 "), stdout);
@@ -452,7 +455,8 @@ Other options:\n\
 "), stdout);
       fputs (_("\
   -o, --output=FILE         write result to FILE instead of standard output\n\
-  -s, --stable              stabilize sort by disabling last-resort comparison\n\
+  -s, --stable              stabilize sort by disabling last-resort comparison\
+\n\
   -S, --buffer-size=SIZE    use SIZE for main memory buffer\n\
 "), stdout);
       printf (_("\
@@ -461,7 +465,8 @@ Other options:\n\
                               multiple options specify multiple directories\n\
       --parallel=N          change the number of sorts run concurrently to N\n\
   -u, --unique              with -c, check for strict ordering;\n\
-                              without -c, output only the first of an equal run\n\
+                              without -c, output only the first of an equal run\
+\n\
 "), DEFAULT_TMPDIR);
       fputs (_("\
   -z, --zero-terminated     end lines with 0 byte, not newline\n\
@@ -471,8 +476,10 @@ Other options:\n\
       fputs (_("\
 \n\
 POS is F[.C][OPTS], where F is the field number and C the character position\n\
-in the field; both are origin 1.  If neither -t nor -b is in effect, characters\n\
+in the field; both are origin 1.  If neither -t nor -b is in effect, characters\
-in a field are counted from the beginning of the preceding whitespace.  OPTS is\n\
+\n\
+in a field are counted from the beginning of the preceding whitespace.  OPTS is\
+\n\
 one or more single-letter ordering options, which override global ordering\n\
 options for that key.  If no key is given, use the entire line as the key.\n\
 \n\
@@ -4481,8 +4488,8 @@ main (int argc, char **argv)
               else if (files[i][0] == '\0')
                 {
                   /* Using the standard `filename:line-number:' prefix here is
-                     not totally appropriate, since NUL is the separator, not NL,
+                     not totally appropriate, since NUL is the separator,
-                     but it might be better than nothing.  */
+                     not NL, but it might be better than nothing.  */
                   unsigned long int file_number = i + 1;
                   error (SORT_FAILURE, 0,
                          _("%s:%lu: invalid zero-length file name"),

src/tail.c

@@ -1546,7 +1546,8 @@ tail_forever_inotify (int wd, struct File_spec *f, size_t n_files,
              must continue to watch the file.  It's only when following
              by file descriptor that we must remove the watch.  */
           if ((ev->mask & IN_DELETE_SELF)
-              || ((ev->mask & IN_MOVE_SELF) && follow_mode == Follow_descriptor))
+              || ((ev->mask & IN_MOVE_SELF)
+                  && follow_mode == Follow_descriptor))
             {
               inotify_rm_watch (wd, fspec->wd);
               hash_delete (wd_to_name, fspec);

src/touch.c

@@ -132,9 +132,11 @@ touch (const char *file)
   else if (! (no_create || no_dereference))
     {
       /* Try to open FILE, creating it if necessary.  */
+      int default_permissions =
+        S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH | S_IWOTH;
       fd = fd_reopen (STDIN_FILENO, file,
                       O_WRONLY | O_CREAT | O_NONBLOCK | O_NOCTTY,
-                      S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH | S_IWOTH);
+                      default_permissions);
 
       /* Don't save a copy of errno if it's EISDIR, since that would lead
          touch to give a bogus diagnostic for e.g., `touch /' (assuming

tests/Coreutils.pm

@@ -67,7 +67,7 @@ defined $ENV{DJDIR}
 # {ERR => ...}
 #           Same as for OUT, but compare with stderr, not stdout.
 # {OUT_SUBST => 's/variable_output/expected_output/'}
-#   Transform actual standard output before comparing it against expected output.
+#   Transform actual standard output before comparing it against expected.
 #   This is useful e.g. for programs like du that produce output that
 #   varies a lot from system.  E.g., an empty file may consume zero file
 #   blocks, or more, depending on the OS and on the file system type.
@@ -507,7 +507,8 @@ sub run_tests ($$$$$)
             {
               my $out_file = $actual{$eo};
               open IN, $out_file
-                or (warn "$program_name: cannot open $out_file for reading: $!\n"),
+                or (warn
+                    "$program_name: cannot open $out_file for reading: $!\n"),
                   $fail = 1, next;
               $actual_data{$eo} = <IN>;
               close IN

tests/cp/existing-perm-race

@@ -71,8 +71,8 @@ case $mode in
   # a $g2 process can maintain an open file descriptor to the
   # destination, but it's safer anyway.
   -rw-r-----*)
-    # If the file has group $g1 and is group-readable, that is definitely
+    # If the file has group $g1 and is group-readable, that is definitely bogus,
-    # bogus, as neither the source nor the destination was readable to group $g1.
+    # as neither the source nor the destination was readable to group $g1.
     test "$group" = "$g1" && fail=1;;
 
   *) fail=1;;

tests/cp/perm

@@ -55,9 +55,13 @@ for u in 31 37 2; do
                 ;;
               cp:*:no)
                 test $u = 37 &&
-                  expected_perms=`echo $expected_perms|sed 's/.....$/-----/'`
+                  expected_perms=`
+                    echo $expected_perms | sed 's/.....$/-----/'
+                  `
                 test $u = 31 &&
-                  expected_perms=`echo $expected_perms|sed 's/..\(..\).$/--\1-/'`
+                  expected_perms=`
+                    echo $expected_perms | sed 's/..\(..\).$/--\1-/'
+                  `
                 ;;
             esac
             test _$actual_perms = _$expected_perms || exit 1

tests/cp/preserve-gid

@@ -60,9 +60,24 @@ t1() {
       "$nameless_uid" "$@"
 }
 
-nameless_uid=`$PERL -le 'foreach my $i (1000..16*1024-1) { getpwuid $i or (print $i), exit }'`
+nameless_uid=`$PERL -le '
-nameless_gid1=`$PERL -le 'foreach my $i (1000..16*1024) { getgrgid $i or (print $i), exit }'`
+  foreach my $i (1000..16*1024-1)
-nameless_gid2=`$PERL -le 'foreach my $i ('"$nameless_gid1"'+1..16*1024) { getgrgid $i or (print $i), exit }'`
+    {
+      getpwuid $i or (print $i), exit
+    }
+'`
+nameless_gid1=`$PERL -le '
+  foreach my $i (1000..16*1024)
+    {
+      getgrgid $i or (print $i), exit
+    }
+'`
+nameless_gid2=`$PERL -le '
+  foreach my $i ('"$nameless_gid1"'+1..16*1024)
+    {
+      getgrgid $i or (print $i), exit
+    }
+'`
 
 if test -z "$nameless_uid" \
     || test -z "$nameless_gid1" \

tests/du/2g

@@ -40,7 +40,8 @@ esac
 min_kb=3000000
 test $min_kb -lt $free_kb ||
 {
-  skip_test_ "too little free space on current partition: $free_kb (need $min_kb KB)"
+  skip_test_ \
+    "too little free space on current partition: $free_kb (need $min_kb KB)"
 }
 
 big=big

tests/du/long-from-unreadable

@@ -47,7 +47,9 @@ dir=`printf '%200s\n' ' '|tr ' ' x`
 # cd $tmp || framework_failure
 
 # Sheesh.  Bash 3.1.5 can't create this hierarchy.  I get
-# cd: error retrieving current directory: getcwd: cannot access parent directories:
+#   cd: error retrieving current directory: getcwd:
+#     cannot access parent directories:
+# (all on one line).
 
 cwd=`pwd`
 # Use perl instead:

tests/init.sh

@@ -111,7 +111,7 @@ fi
 
 # Eval this code in a subshell to determine a shell's suitability.
 # 10 - passes all tests; ok to use
-#  9 - ok, but enabling "set -x" corrupts application stderr; prefer higher score
+#  9 - ok, but enabling "set -x" corrupts app stderr; prefer higher score
 #  ? - not ok
 gl_shell_test_script_='
 test $(echo y) = y || exit 1
@@ -414,7 +414,8 @@ mktempd_()
 
   case $template_ in
   *XXXX) ;;
-  *) fail_ "invalid template: $template_ (must have a suffix of at least 4 X's)";;
+  *) fail_ \
+       "invalid template: $template_ (must have a suffix of at least 4 X's)";;
   esac
 
   # First, try to use mktemp.

tests/install/basic-1

@@ -74,7 +74,10 @@ test -d newdir3 || fail=1
 # hence cannot do anything meaningful with the following relative-named dirs.
 iwd=`pwd`
 mkdir sub || fail=1
-(cd sub && chmod 0 . && ginstall -d "$iwd/xx/yy" rel/sub1 rel/sub2 2> /dev/null) && fail=1
+(cd sub &&
+ chmod 0 . &&
+ ginstall -d "$iwd/xx/yy" rel/sub1 rel/sub2 2> /dev/null
+) && fail=1
 chmod 755 sub
 
 # Ensure that the first argument-dir has been created.

tests/ls/nameless-uid

@@ -24,7 +24,9 @@ print_ver_ ls
 
 require_root_
 
-nameless_uid=`$PERL -e 'foreach my $i (1000..16*1024) { getpwuid $i or (print "$i\n"), exit }'`
+nameless_uid=`$PERL -e '
+  foreach my $i (1000..16*1024) { getpwuid $i or (print "$i\n"), exit }
+'`
 
 if test x$nameless_uid = x; then
   skip_test_ "couldn't find a nameless UID"

tests/ls/readdir-mountpoint-inode

@@ -22,7 +22,8 @@ print_ver_ ls
 # We use --local here so as to not activate
 # potentially very many remote mounts.
 mount_points=$(df --local -P 2>&1 | sed -n 's,.*[0-9]% \(/.\),\1,p')
-test -z "$mount_points" && skip_test_ "this test requires a non-root mount point"
+test -z "$mount_points" &&
+   skip_test_ "this test requires a non-root mount point"
 
 # Given e.g., /dev/shm, produce the list of GNU ls options that
 # let us list just that entry using readdir data from its parent:

tests/misc/chroot-credentials

@@ -28,12 +28,17 @@ test $(chroot / whoami) = root || fail=1
 test "$(groups)" = "$(chroot / groups)" || fail=1
 
 # Verify that credentials are changed correctly.
-test "$(chroot --userspec=$NON_ROOT_USERNAME:$NON_ROOT_GROUP / whoami)" != root \
+whoami_after_chroot=$(
-    || fail=1
+  chroot --userspec=$NON_ROOT_USERNAME:$NON_ROOT_GROUP / whoami
+)
+test "$whoami_after_chroot" != root || fail=1
 
 # Verify that there are no additional groups.
-test "$(chroot --userspec=$NON_ROOT_USERNAME:$NON_ROOT_GROUP --groups=$NON_ROOT_GROUP / id -G)"\
+id_G_after_chroot=$(
-    = $NON_ROOT_GROUP || fail=1
+  chroot --userspec=$NON_ROOT_USERNAME:$NON_ROOT_GROUP \
+    --groups=$NON_ROOT_GROUP / id -G
+)
+test "$id_G_after_chroot" = $NON_ROOT_GROUP || fail=1
 
 # Verify that when specifying only the user name we get the current
 # primary group ID.

tests/misc/cut

@@ -87,7 +87,8 @@ my @Tests =
     . "\tonly when operating on fields\n$try"}],
   # You must specify bytes or fields (or chars)
   ['z', '', {IN=>":\n"}, {OUT=>""}, {EXIT=>1},
-   {ERR=>"$prog: you must specify a list of bytes, characters, or fields\n$try"}],
+   {ERR=>"$prog: you must specify a list of bytes, characters, or fields\n$try"}
+  ],
   # Empty field list
   ['empty-fl', qw(-f ''), {IN=>":\n"}, {OUT=>""}, {EXIT=>1}, {ERR=>$from_1}],
   # Missing field list
@@ -124,7 +125,7 @@ my @Tests =
   ['out-delim3a', '-c1-3,2-4,6-', '--output-d=:', {IN=>"abcdefg\n"},
    {OUT=>"abcd:fg\n"}],
   # Ensure that the following two commands produce the same output.
-  # Before an off-by-one fix, the output from the former would not contain a `:'.
+  # Before an off-by-1 fix, the output from the former would not contain a `:'.
   ['out-delim4', '-c4-,2-3', '--output-d=:',
    {IN=>"abcdefg\n"}, {OUT=>"bc:defg\n"}],
   ['out-delim5', '-c2-3,4-', '--output-d=:',
@@ -137,14 +138,16 @@ my @Tests =
   ['od-overlap2', '-b1-2,2-', '--output-d=:', {IN=>"abc\n"}, {OUT=>"abc\n"}],
   ['od-overlap3', '-b1-3,2-', '--output-d=:', {IN=>"abcd\n"}, {OUT=>"abcd\n"}],
   ['od-overlap4', '-b1-3,2-3', '--output-d=:', {IN=>"abcd\n"}, {OUT=>"abc\n"}],
-  ['od-overlap5', '-b1-3,1-4', '--output-d=:', {IN=>"abcde\n"}, {OUT=>"abcd\n"}],
+  ['od-overlap5', '-b1-3,1-4', '--output-d=:',
+   {IN=>"abcde\n"}, {OUT=>"abcd\n"}],
 
   # None of the following invalid ranges provoked an error up to coreutils-6.9.
   ['inval1', qw(-f 2-0), {IN=>''}, {OUT=>''}, {EXIT=>1},
    {ERR=>"$prog: invalid decreasing range\n$try"}],
   ['inval2', qw(-f -), {IN=>''}, {OUT=>''}, {EXIT=>1}, {ERR=>$no_endpoint}],
   ['inval3', '-f', '4,-', {IN=>''}, {OUT=>''}, {EXIT=>1}, {ERR=>$no_endpoint}],
-  ['inval4', '-f', '1-2,-', {IN=>''}, {OUT=>''}, {EXIT=>1}, {ERR=>$no_endpoint}],
+  ['inval4', '-f', '1-2,-', {IN=>''}, {OUT=>''}, {EXIT=>1},
+   {ERR=>$no_endpoint}],
   ['inval5', '-f', '1-,-', {IN=>''}, {OUT=>''}, {EXIT=>1}, {ERR=>$no_endpoint}],
   ['inval6', '-f', '-1,-', {IN=>''}, {OUT=>''}, {EXIT=>1}, {ERR=>$no_endpoint}],
  );

tests/misc/date

@@ -230,7 +230,8 @@ my @Tests =
      ['tz-5wf', '+%:8z', {OUT=>"%:8z"}, {ENV=>'TZ=XXX0:01'}],
 
      ['ns-relative',
-      '--iso=ns', "-d'1970-01-01 00:00:00.1234567 UTC +961062237.987654321 sec'",
+      '--iso=ns',
+      "-d'1970-01-01 00:00:00.1234567 UTC +961062237.987654321 sec'",
       {OUT=>"2000-06-15T09:43:58,111111021+0000"}],
      ['ns-relativer', '--rfc-3339=ns',
       "-d'1970-01-01 00:00:00.1234567 UTC +961062237.987654321 sec'",

tests/misc/join

@@ -216,7 +216,8 @@ my @tv = (
 # '--header' always outputs headers from the first file
 # even if the headers from the second file don't match
 ['header-5', '--header',
- [ "ID1 Name\n1 A\n2 B\n", "ID2 Color\n1 red\n"], "ID1 Name Color\n1 A red\n", 0],
+ [ "ID1 Name\n1 A\n2 B\n", "ID2 Color\n1 red\n"],
+   "ID1 Name Color\n1 A red\n", 0],
 
 );
 

tests/misc/sha1sum

@@ -60,7 +60,8 @@ my @Tests =
      ['check-bsd3', '--check', '--status',
                         {IN=> {'f.sha1' => "SHA1 (f) = $sha_degenerate\n"}},
                         {AUX=> {f=> 'bar'}}, {EXIT=> 1}],
-     ['check-openssl', '--check', {IN=> {'f.md5' => "MD5(f)= $sha_degenerate\n"}},
+     ['check-openssl', '--check',
+                        {IN=> {'f.md5' => "MD5(f)= $sha_degenerate\n"}},
                         {AUX=> {f=> ''}},
                         {ERR=>"sha1sum: f.md5: no properly formatted "
                           . "SHA1 checksum lines found\n"},

tests/misc/sort

@@ -55,8 +55,11 @@ my @Tests =
 ["n11b", '-s -n -k1,1', {IN=>".010\n.01a\n"}, {OUT=>".010\n.01a\n"}],
 
 # human readable suffixes
-["h1", '-h', {IN=>"1Y\n1Z\n1E\n1P\n1T\n1G\n1M\n1K\n02\n1\nY\n-1k\n-1M\n-1G\n-1T\n-1P\n-1E\n-1Z\n-1Y\n"},
+["h1", '-h',
- {OUT=>"-1Y\n-1Z\n-1E\n-1P\n-1T\n-1G\n-1M\n-1k\nY\n1\n02\n1K\n1M\n1G\n1T\n1P\n1E\n1Z\n1Y\n"}],
+ {IN=>"1Y\n1Z\n1E\n1P\n1T\n1G\n1M\n1K\n02\n1\nY\n-1k\n-1M\n-1G\n-1T\n"
+      . "-1P\n-1E\n-1Z\n-1Y\n"},
+ {OUT=>"-1Y\n-1Z\n-1E\n-1P\n-1T\n-1G\n-1M\n-1k\nY\n1\n02\n1K\n1M\n1G\n1T\n"
+      . "1P\n1E\n1Z\n1Y\n"}],
 ["h2", '-h', {IN=>"1M\n-2G\n-3K"}, {OUT=>"-2G\n-3K\n1M\n"}],
 # check that it works with powers of 1024
 ["h3", '-k 2,2h -k 1,1', {IN=>"a 1G\nb 1023M\n"}, {OUT=>"b 1023M\na 1G\n"}],
@@ -275,8 +278,14 @@ my @Tests =
 # of memcmp in the Next C library.  With optimization, gcc uses its
 # (working) builtin version.  Test case form William Lewis.
 ["20a", '',
- {IN=>"_________U__free\n_________U__malloc\n_________U__abort\n_________U__memcpy\n_________U__memset\n_________U_dyld_stub_binding_helper\n_________U__malloc\n_________U___iob\n_________U__abort\n_________U__fprintf\n"},
+ {IN=>"_________U__free\n_________U__malloc\n_________U__abort\n"
- {OUT=>"_________U___iob\n_________U__abort\n_________U__abort\n_________U__fprintf\n_________U__free\n_________U__malloc\n_________U__malloc\n_________U__memcpy\n_________U__memset\n_________U_dyld_stub_binding_helper\n"}],
+      . "_________U__memcpy\n_________U__memset\n"
+      . "_________U_dyld_stub_binding_helper\n_________U__malloc\n"
+      . "_________U___iob\n_________U__abort\n_________U__fprintf\n"},
+ {OUT=>"_________U___iob\n_________U__abort\n_________U__abort\n"
+       . "_________U__fprintf\n_________U__free\n_________U__malloc\n"
+       . "_________U__malloc\n_________U__memcpy\n_________U__memset\n"
+       . "_________U_dyld_stub_binding_helper\n"}],
 
 # Demonstrate that folding changes the ordering of e.g. A, a, and _
 # because while they normally (in the C locale) collate like A, _, a,

tests/misc/sort-continue

@@ -33,7 +33,8 @@ done
  exec 0</dev/null 3<&- 4<&- 5<&-
  sort -n -m __test.* > out
 ) &&
-compare in out || { fail=1; echo 'file descriptor exhaustion not handled' 1>&2; }
+compare in out ||
+  { fail=1; echo 'file descriptor exhaustion not handled' 1>&2; }
 
 echo 32 | tee -a in > in1
 (

tests/misc/sort-files0-from

@@ -80,7 +80,7 @@ my @Tests =
    ['2a', '--files0-from=-', '<',
     {IN=>{f=>"g\0g\0"}}, {AUX=>{g=>'a'}}, {OUT=>"a\na\n"} ],
 
-   # Ensure that $prog performs no processing when there is a zero-length filename
+   # Ensure that $prog does nothing when there is a zero-length filename.
    # Note that the behavior here differs from `wc' in that the
    # first zero-length file name is treated as fatal, so there
    # should be no output on STDOUT.

tests/misc/sort-rand

@@ -40,11 +40,13 @@ if (locale --version) > /dev/null 2>&1; then
   LC_ALL=$locale sort --random-sort in > out2 || fail=1
 
   # Fail if the output "randomly" is the same twice in a row.
-  compare out1 out2 > /dev/null && { fail=1; echo "not random with LC_ALL=$locale" 1>&2; }
+  compare out1 out2 > /dev/null &&
+    { fail=1; echo "not random with LC_ALL=$locale" 1>&2; }
 
   # Fail if the sorted output is not the same as the input.
   sort -n out > out1
-  compare in out1 || { fail=1; echo "not a permutation with LC_ALL=$locale" 1>&2; }
+  compare in out1 ||
+    { fail=1; echo "not a permutation with LC_ALL=$locale" 1>&2; }
 fi
 
 Exit $fail

tests/misc/stdbuf

@@ -22,7 +22,8 @@ print_ver_ stdbuf mv
 getlimits_
 require_built_ stdbuf
 
-# stdbuf fails when the absolute top build dir name contains e.g., space, TAB, NL
+# stdbuf fails when the absolute top build dir name contains e.g.,
+# space, TAB, NL
 lf='
 '
 case $abs_top_builddir in

tests/misc/tr

@@ -54,7 +54,8 @@ my @Tests =
   ['i', qw(-d '[:xdigit:]'), {IN=>'w0x1y2z3456789acbdefABCDEFz'},
    {OUT=>'wxyzz'}],
   ['j', qw(-d '[:digit:]'), {IN=>'0123456789'}, {OUT=>''}],
-  ['k', qw(-d '[:digit:]'), {IN=>'a0b1c2d3e4f5g6h7i8j9k'}, {OUT=>'abcdefghijk'}],
+  ['k', qw(-d '[:digit:]'),
+   {IN=>'a0b1c2d3e4f5g6h7i8j9k'}, {OUT=>'abcdefghijk'}],
   ['l', qw(-d '[:lower:]'), {IN=>'abcdefghijklmnopqrstuvwxyz'}, {OUT=>''}],
   ['m', qw(-d '[:upper:]'), {IN=>'ABCDEFGHIJKLMNOPQRSTUVWXYZ'}, {OUT=>''}],
   ['n', qw(-d '[:lower:][:upper:]'),
@@ -83,11 +84,13 @@ my @Tests =
   ['u', qw(-ds b a), {IN=>'aabbaa'}, {OUT=>'a'}],
   ['v', qw(-ds '[:xdigit:]' Z), {IN=>'ZZ0123456789acbdefABCDEFZZ'}, {OUT=>'Z'}],
 
-  # Try some data with 8th bit set in case something is mistakenly sign-extended.
+  # Try some data with 8th bit set in case something is mistakenly
+  # sign-extended.
   ['w', qw(-ds '\350' '\345'),
    {IN=>"\300\301\377\345\345\350\345"},
    {OUT=>"\300\301\377\345"}],
-  ['x', qw(-s abcdefghijklmn '[:*016]'), {IN=>'abcdefghijklmnop'}, {OUT=>':op'}],
+  ['x', qw(-s abcdefghijklmn '[:*016]'),
+   {IN=>'abcdefghijklmnop'}, {OUT=>':op'}],
   ['y', qw(-d a-z), {IN=>'abc $code'}, {OUT=>' $'}],
   ['z', qw(-ds a-z '$.'), {IN=>'a.b.c $$$$code\\'}, {OUT=>'. $\\'}],
 

tests/misc/uniq

@@ -180,10 +180,13 @@ my @Tests =
   "$prog: printing all duplicated lines and repeat counts is meaningless\n$try"}
   ],
  ['113', '--all-repeated=separate', {IN=>"a\na\n"}, {OUT=>"a\na\n"}],
- ['114', '--all-repeated=separate', {IN=>"a\na\nb\nc\nc\n"}, {OUT=>"a\na\n\nc\nc\n"}],
+ ['114', '--all-repeated=separate',
- ['115', '--all-repeated=separate', {IN=>"a\na\nb\nb\nc\n"}, {OUT=>"a\na\n\nb\nb\n"}],
+  {IN=>"a\na\nb\nc\nc\n"}, {OUT=>"a\na\n\nc\nc\n"}],
+ ['115', '--all-repeated=separate',
+  {IN=>"a\na\nb\nb\nc\n"}, {OUT=>"a\na\n\nb\nb\n"}],
  ['116', '--all-repeated=prepend', {IN=>"a\na\n"}, {OUT=>"\na\na\n"}],
- ['117', '--all-repeated=prepend', {IN=>"a\na\nb\nc\nc\n"}, {OUT=>"\na\na\n\nc\nc\n"}],
+ ['117', '--all-repeated=prepend',
+  {IN=>"a\na\nb\nc\nc\n"}, {OUT=>"\na\na\n\nc\nc\n"}],
  ['118', '--all-repeated=prepend', {IN=>"a\nb\n"}, {OUT=>""}],
  ['119', '--all-repeated=badoption', {IN=>"a\n"}, {OUT=>""}, {EXIT=>1},
   {ERR=>"$prog: invalid argument \`badoption' for \`--all-repeated'\n"

tests/mv/atomic

@@ -21,11 +21,13 @@ print_ver_ mv
 require_strace_ unlink
 
 # Before the fix, mv would unnecessarily unlink the destination symlink:
-#   $ rm -rf s[12]; ln -s / s1; ln -s /tmp s2; strace -qe unlink /bin/mv -T s1 s2
+#   $ rm -rf s[12]; ln -s / s1; ln -s /tmp s2
+#   $ strace -qe unlink /bin/mv -T s1 s2
 #   unlink("s2") = 0
 #
 # With the fix, it doesn't call unlink:
-#   $ rm -rf s[12]; ln -s / s1; ln -s /tmp s2; strace -qe unlink ./mv -T s1 s2
+#   $ rm -rf s[12]; ln -s / s1; ln -s /tmp s2
+#   $ strace -qe unlink ./mv -T s1 s2
 #   $
 
 ln -s t1 s1 || framework_failure

tests/mv/part-fail

@@ -30,9 +30,10 @@ chmod u-w "$other_partition_tmpdir" || framework_failure
 
 
 mv -f k "$other_partition_tmpdir" 2> out && fail=1
-cat <<EOF > exp
+printf \
-mv: inter-device move failed: \`k' to \`$other_partition_tmpdir/k'; unable to remove target: Permission denied
+'mv: inter-device move failed: `%s'\'' to `%s'\'';'\
-EOF
+' unable to remove target: Permission denied\n' \
+  k "$other_partition_tmpdir/k" >exp
 
 # On some (less-compliant) systems, we get EPERM in this case.
 # Accept either diagnostic.

tests/mv/part-symlink

@@ -93,8 +93,9 @@ for copy in cp mv; do
           # and put brackets around the output.
           test -s .err && {
             echo ' [' | tr -d '\n'
-            sed 's/^[^:][^:]*\(..\):/\1:/;s,'"$other_partition_tmpdir/,," .err
+            sed 's/^[^:][^:]*\(..\):/\1:/;s,'"$other_partition_tmpdir/,," .err |
-            echo ']' | tr -d '\n'
+              tr -d '\n'
+            echo ']'
             }
           # Strip off all but the file names.
           # Remove any site-dependent part of each file name.
@@ -110,7 +111,7 @@ for copy in cp mv; do
                   -e "s,$other_partition_tmpdir/,," \
                   -e "s,$pwd_tmp/,," \
                   -e 's/^[^ ]*  *[^ ]*  *[^ ]*  *[^ ]*  *[^ ]*  *[^ ]*  *//'`
-          echo "($ls) ($ls2)"
+          echo " ("$ls") ("$ls2")"
 
           # If the command failed, then it must not have changed the files.
           if test $copy_status != 0; then
@@ -134,15 +135,14 @@ for copy in cp mv; do
                 fi
                 case "`cat $f`" in
                   "$contents") ;;
-                  *) echo $copy FAILED;;
+                  *) echo " $copy FAILED";;
                 esac
               else
-                echo symlink-loop
+                echo " symlink-loop"
               fi
             done
           fi
-        ) | tr '\n' ' '
+        )
-        echo
       ) | sed 's/  *$//'
       cd ..
     done
@@ -154,49 +154,107 @@ test $fail = 1 &&
   { (exit 1); exit; }
 
 cat <<\EOF > $expected
-1 cp loc_reg rem_sl [cp: `loc_reg' and `rem_sl' are the same file ](loc_reg) (rem_sl -> dir/loc_reg)
+1 cp loc_reg rem_sl
-0 cp --rem loc_reg rem_sl (loc_reg) (rem_sl)
+ [cp: `loc_reg' and `rem_sl' are the same file]
-0 cp --rem -d loc_reg rem_sl (loc_reg) (rem_sl)
+ (loc_reg) (rem_sl -> dir/loc_reg)
-0 cp --rem -b loc_reg rem_sl (loc_reg) (rem_sl rem_sl~ -> dir/loc_reg)
+0 cp --rem loc_reg rem_sl
-0 cp -b loc_reg rem_sl (loc_reg) (rem_sl rem_sl~ -> dir/loc_reg)
+ (loc_reg) (rem_sl)
-0 cp -bd loc_reg rem_sl (loc_reg) (rem_sl rem_sl~ -> dir/loc_reg)
+0 cp --rem -d loc_reg rem_sl
-1 cp -d loc_reg rem_sl [cp: `loc_reg' and `rem_sl' are the same file ](loc_reg) (rem_sl -> dir/loc_reg)
+ (loc_reg) (rem_sl)
+0 cp --rem -b loc_reg rem_sl
+ (loc_reg) (rem_sl rem_sl~ -> dir/loc_reg)
+0 cp -b loc_reg rem_sl
+ (loc_reg) (rem_sl rem_sl~ -> dir/loc_reg)
+0 cp -bd loc_reg rem_sl
+ (loc_reg) (rem_sl rem_sl~ -> dir/loc_reg)
+1 cp -d loc_reg rem_sl
+ [cp: `loc_reg' and `rem_sl' are the same file]
+ (loc_reg) (rem_sl -> dir/loc_reg)
 
-1 cp rem_sl loc_reg [cp: `rem_sl' and `loc_reg' are the same file ](loc_reg) (rem_sl -> dir/loc_reg)
+1 cp rem_sl loc_reg
-1 cp --rem rem_sl loc_reg [cp: `rem_sl' and `loc_reg' are the same file ](loc_reg) (rem_sl -> dir/loc_reg)
+ [cp: `rem_sl' and `loc_reg' are the same file]
-1 cp --rem -d rem_sl loc_reg [cp: `rem_sl' and `loc_reg' are the same file ](loc_reg) (rem_sl -> dir/loc_reg)
+ (loc_reg) (rem_sl -> dir/loc_reg)
-1 cp --rem -b rem_sl loc_reg [cp: `rem_sl' and `loc_reg' are the same file ](loc_reg) (rem_sl -> dir/loc_reg)
+1 cp --rem rem_sl loc_reg
-1 cp -b rem_sl loc_reg [cp: `rem_sl' and `loc_reg' are the same file ](loc_reg) (rem_sl -> dir/loc_reg)
+ [cp: `rem_sl' and `loc_reg' are the same file]
-0 cp -bd rem_sl loc_reg (loc_reg -> dir/loc_reg loc_reg~) (rem_sl -> dir/loc_reg) symlink-loop symlink-loop
+ (loc_reg) (rem_sl -> dir/loc_reg)
-1 cp -d rem_sl loc_reg [cp: `rem_sl' and `loc_reg' are the same file ](loc_reg) (rem_sl -> dir/loc_reg)
+1 cp --rem -d rem_sl loc_reg
+ [cp: `rem_sl' and `loc_reg' are the same file]
+ (loc_reg) (rem_sl -> dir/loc_reg)
+1 cp --rem -b rem_sl loc_reg
+ [cp: `rem_sl' and `loc_reg' are the same file]
+ (loc_reg) (rem_sl -> dir/loc_reg)
+1 cp -b rem_sl loc_reg
+ [cp: `rem_sl' and `loc_reg' are the same file]
+ (loc_reg) (rem_sl -> dir/loc_reg)
+0 cp -bd rem_sl loc_reg
+ (loc_reg -> dir/loc_reg loc_reg~) (rem_sl -> dir/loc_reg)
+ symlink-loop
+ symlink-loop
+1 cp -d rem_sl loc_reg
+ [cp: `rem_sl' and `loc_reg' are the same file]
+ (loc_reg) (rem_sl -> dir/loc_reg)
 
-1 cp loc_sl rem_reg [cp: `loc_sl' and `rem_reg' are the same file ](loc_sl -> rem_reg) (rem_reg)
+1 cp loc_sl rem_reg
-1 cp --rem loc_sl rem_reg [cp: `loc_sl' and `rem_reg' are the same file ](loc_sl -> rem_reg) (rem_reg)
+ [cp: `loc_sl' and `rem_reg' are the same file]
-1 cp --rem -d loc_sl rem_reg [cp: `loc_sl' and `rem_reg' are the same file ](loc_sl -> rem_reg) (rem_reg)
+ (loc_sl -> rem_reg) (rem_reg)
-1 cp --rem -b loc_sl rem_reg [cp: `loc_sl' and `rem_reg' are the same file ](loc_sl -> rem_reg) (rem_reg)
+1 cp --rem loc_sl rem_reg
-1 cp -b loc_sl rem_reg [cp: `loc_sl' and `rem_reg' are the same file ](loc_sl -> rem_reg) (rem_reg)
+ [cp: `loc_sl' and `rem_reg' are the same file]
-0 cp -bd loc_sl rem_reg (loc_sl -> rem_reg) (rem_reg -> rem_reg rem_reg~) symlink-loop symlink-loop
+ (loc_sl -> rem_reg) (rem_reg)
-1 cp -d loc_sl rem_reg [cp: `loc_sl' and `rem_reg' are the same file ](loc_sl -> rem_reg) (rem_reg)
+1 cp --rem -d loc_sl rem_reg
+ [cp: `loc_sl' and `rem_reg' are the same file]
+ (loc_sl -> rem_reg) (rem_reg)
+1 cp --rem -b loc_sl rem_reg
+ [cp: `loc_sl' and `rem_reg' are the same file]
+ (loc_sl -> rem_reg) (rem_reg)
+1 cp -b loc_sl rem_reg
+ [cp: `loc_sl' and `rem_reg' are the same file]
+ (loc_sl -> rem_reg) (rem_reg)
+0 cp -bd loc_sl rem_reg
+ (loc_sl -> rem_reg) (rem_reg -> rem_reg rem_reg~)
+ symlink-loop
+ symlink-loop
+1 cp -d loc_sl rem_reg
+ [cp: `loc_sl' and `rem_reg' are the same file]
+ (loc_sl -> rem_reg) (rem_reg)
 
-1 cp rem_reg loc_sl [cp: `rem_reg' and `loc_sl' are the same file ](loc_sl -> rem_reg) (rem_reg)
+1 cp rem_reg loc_sl
-0 cp --rem rem_reg loc_sl (loc_sl) (rem_reg)
+ [cp: `rem_reg' and `loc_sl' are the same file]
-0 cp --rem -d rem_reg loc_sl (loc_sl) (rem_reg)
+ (loc_sl -> rem_reg) (rem_reg)
-0 cp --rem -b rem_reg loc_sl (loc_sl loc_sl~ -> rem_reg) (rem_reg)
+0 cp --rem rem_reg loc_sl
-0 cp -b rem_reg loc_sl (loc_sl loc_sl~ -> rem_reg) (rem_reg)
+ (loc_sl) (rem_reg)
-0 cp -bd rem_reg loc_sl (loc_sl loc_sl~ -> rem_reg) (rem_reg)
+0 cp --rem -d rem_reg loc_sl
-1 cp -d rem_reg loc_sl [cp: `rem_reg' and `loc_sl' are the same file ](loc_sl -> rem_reg) (rem_reg)
+ (loc_sl) (rem_reg)
+0 cp --rem -b rem_reg loc_sl
+ (loc_sl loc_sl~ -> rem_reg) (rem_reg)
+0 cp -b rem_reg loc_sl
+ (loc_sl loc_sl~ -> rem_reg) (rem_reg)
+0 cp -bd rem_reg loc_sl
+ (loc_sl loc_sl~ -> rem_reg) (rem_reg)
+1 cp -d rem_reg loc_sl
+ [cp: `rem_reg' and `loc_sl' are the same file]
+ (loc_sl -> rem_reg) (rem_reg)
 
-0 mv loc_reg rem_sl () (rem_sl)
+0 mv loc_reg rem_sl
-0 mv -b loc_reg rem_sl () (rem_sl rem_sl~ -> dir/loc_reg)
+ () (rem_sl)
+0 mv -b loc_reg rem_sl
+ () (rem_sl rem_sl~ -> dir/loc_reg)
 
-1 mv rem_sl loc_reg [mv: `rem_sl' and `loc_reg' are the same file ](loc_reg) (rem_sl -> dir/loc_reg)
+1 mv rem_sl loc_reg
-0 mv -b rem_sl loc_reg (loc_reg -> dir/loc_reg loc_reg~) ()
+ [mv: `rem_sl' and `loc_reg' are the same file]
+ (loc_reg) (rem_sl -> dir/loc_reg)
+0 mv -b rem_sl loc_reg
+ (loc_reg -> dir/loc_reg loc_reg~) ()
 
-1 mv loc_sl rem_reg [mv: `loc_sl' and `rem_reg' are the same file ](loc_sl -> rem_reg) (rem_reg)
+1 mv loc_sl rem_reg
-0 mv -b loc_sl rem_reg () (rem_reg -> rem_reg rem_reg~)
+ [mv: `loc_sl' and `rem_reg' are the same file]
+ (loc_sl -> rem_reg) (rem_reg)
+0 mv -b loc_sl rem_reg
+ () (rem_reg -> rem_reg rem_reg~)
 
-0 mv rem_reg loc_sl (loc_sl) ()
+0 mv rem_reg loc_sl
-0 mv -b rem_reg loc_sl (loc_sl loc_sl~ -> rem_reg) ()
+ (loc_sl) ()
+0 mv -b rem_reg loc_sl
+ (loc_sl loc_sl~ -> rem_reg) ()
 
 EOF
 

tests/mv/sticky-to-xpart

@@ -41,7 +41,10 @@ chmod go+x . || framework_failure
 
 
 # Ensure that $NON_ROOT_USERNAME can access the required version of mv.
-version=`setuidgid $NON_ROOT_USERNAME env PATH="$PATH" mv --version|sed -n '1s/.* //p'`
+version=`
+  setuidgid $NON_ROOT_USERNAME env PATH="$PATH" mv --version |
+  sed -n '1s/.* //p'
+`
 case $version in
   $PACKAGE_VERSION) ;;
   *) echo "$0: cannot access just-built mv as user $NON_ROOT_USERNAME" 1>&2

tests/pr/pr-tests

@@ -256,8 +256,10 @@ my @tv = (
 ['10md', '-J -m -l 24 -f', [\'tFFt-lm', \'loli'], [\'Jml24f-lm-lo'], 0],
 ['10me', '-W 35 -J -m -l 24 -f', [\'tFFt-lm', \'loli'], [\'W35Jml24f-lmlo'], 0],
 ['10mf', '-w 35 -J -m -l 24 -f', [\'tFFt-lm', \'loli'], [\'W35Jml24f-lmlo'], 0],
-['10mg', '-n.3 -J -m -l 24 -f', [\'tFFt-lm', \'tFFt-lm', \'loli'], [\'nJml24f-lmlmlo'], 0],
+['10mg', '-n.3 -J -m -l 24 -f', [\'tFFt-lm', \'tFFt-lm', \'loli'],
-['10mh', '-n.3 -J -m -l 24 -f', [\'tFFt-lm', \'loli', \'tFFt-lm'], [\'nJml24f-lmlolm'], 0],
+ [\'nJml24f-lmlmlo'], 0],
+['10mh', '-n.3 -J -m -l 24 -f', [\'tFFt-lm', \'loli', \'tFFt-lm'],
+ [\'nJml24f-lmlolm'], 0],
 ['10aa', '-a -3 -l 24 -f', [\'tFFt-lm'], [\'a3l24f-lm'], 0],
 ['10ab', '-W 35 -a -3 -l 24 -f', [\'tFFt-lm'], [\'W35a3l24f-lm'], 0],
 ['10ac', '-J -a -3 -l 24 -f', [\'tFFt-lm'], [\'Ja3l24f-lm'], 0],
@@ -268,12 +270,18 @@ my @tv = (
 ['10bd', '-W 35 -J -b -3 -l 24 -f', [\'tFFt-lm'], [\'W35Jb3l24f-lm'], 0],
 #
 # merge files (-m option)  use separator string (-S option)
-['11sa', '-n.3 -S:--: -m -l 20 -f', [\'tFFt-bl', \'FnFn'], [\'nSml20-bl-FF'], 0],
+['11sa', '-n.3 -S:--: -m -l 20 -f', [\'tFFt-bl', \'FnFn'],
-['11sb', '-n.3 -S:--: -m -l 24 -f', [\'tFFt-bl', \'FnFn'], [\'nSml24-bl-FF'], 0],
+ [\'nSml20-bl-FF'], 0],
-['11se', '-n.3 -S:--: -m -l 20 -f', [\'tn', \'tn', \'FnFn'], [\'nSml20-t-t-FF'], 0],
+['11sb', '-n.3 -S:--: -m -l 24 -f', [\'tFFt-bl', \'FnFn'],
-['11sf', '-n.3 -S:--: -m -l 24 -f', [\'tn', \'tn', \'FnFn'], [\'nSml24-t-t-FF'], 0],
+ [\'nSml24-bl-FF'], 0],
-['11sg', '-n.3 -S:--: -m -l 20 -f', [\'tn', \'tn', \'FnFn', \'FnFn'], [\'nSml20-t-tFFFF'], 0],
+['11se', '-n.3 -S:--: -m -l 20 -f', [\'tn', \'tn', \'FnFn'],
-['11sh', '-n.3 -S:--: -m -l 24 -f', [\'tn', \'tn', \'FnFn', \'FnFn'], [\'nSml24-t-tFFFF'], 0],
+ [\'nSml20-t-t-FF'], 0],
+['11sf', '-n.3 -S:--: -m -l 24 -f', [\'tn', \'tn', \'FnFn'],
+ [\'nSml24-t-t-FF'], 0],
+['11sg', '-n.3 -S:--: -m -l 20 -f', [\'tn', \'tn', \'FnFn', \'FnFn'],
+ [\'nSml20-t-tFFFF'], 0],
+['11sh', '-n.3 -S:--: -m -l 24 -f', [\'tn', \'tn', \'FnFn', \'FnFn'],
+ [\'nSml24-t-tFFFF'], 0],
 #
 # left margin (-o option) and separator string (-S option)
 ['12aa', '-o3 -a -3 -l24 -f', [\'tn'], [\'o3a3l24f-tn'], 0],
@@ -284,7 +292,8 @@ my @tv = (
 ['12bc', '-o3 -b -3 -S:--: -n. -l24 -f', [\'tn'], [\'o3b3Snl24f-tn'], 0],
 ['12ma', '-o3 -m -l24 -f', [\'tFFt-bl', \'tn'], [\'o3ml24f-bl-tn'], 0],
 ['12mb', '-o3 -m -S:--: -l24 -f', [\'tFFt-bl', \'tn'], [\'o3mSl24f-bl-tn'], 0],
-['12mc', '-o3 -m -S:--: -n. -l24 -f', [\'tFFt-bl', \'tn'], [\'o3mSnl24fbltn'], 0],
+['12mc', '-o3 -m -S:--: -n. -l24 -f', [\'tFFt-bl', \'tn'],
+ [\'o3mSnl24fbltn'], 0],
 ['12md', '-o3 -J -m -l24 -f', [\'tFFt-lm', \'loli'], [\'o3Jml24f-lm-lo'], 0],
 #
 #
@@ -342,18 +351,23 @@ my @tv = (
 # SunOS.5.5.1-BUG: 8 input spaces --> 11 output spaces between a and b;
 ['i-opt-a', '-tn -i5 -h ""', "a        b\n", "    1	a	    b\n", 0],
 # SunOS.5.5.1-BUG: 8 input spaces -->  9 output spaces between a and b;
-['i-opt-b', '-tn -i5 -o9 -h ""', "a        b\n", "		   1	a	    b\n", 0],
+['i-opt-b', '-tn -i5 -o9 -h ""', "a        b\n",
+ "		   1	a	    b\n", 0],
 #
 # line number overflow not allowed: cut off leading digits;
 # don't adapt other UNIXes, no real standard to follow, a consequent
 # programming of column handling may change the GNU pr concept.
-['ncut-a', '-tn2 -N98', "y\ny\ny\ny\ny\n", "98	y\n99	y\n00	y\n01	y\n02	y\n", 0],
+['ncut-a', '-tn2 -N98', "y\ny\ny\ny\ny\n",
-['ncut-b', '-tn:2 -N98', "y\ny\ny\ny\ny\n", "98:y\n99:y\n00:y\n01:y\n02:y\n", 0],
+ "98	y\n99	y\n00	y\n01	y\n02	y\n", 0],
+['ncut-b', '-tn:2 -N98', "y\ny\ny\ny\ny\n",
+ "98:y\n99:y\n00:y\n01:y\n02:y\n", 0],
 
 ['margin-0', '-o 0', '', '', 0],
 
 # BUG fixed: that leading space on 3rd line of output should not be there
-['dbl-sp-a', '-d -l 14 -h ""', "1\n2\n", "\n\n-- Date/Time --                                                   Page 1\n\n\n1\n\n2\n\n\n\n\n\n\n", 0],
+['dbl-sp-a', '-d -l 14 -h ""', "1\n2\n",
+ "\n\n-- Date/Time --                                                   "
+ . "Page 1\n\n\n1\n\n2\n\n\n\n\n\n\n", 0],
 # This test failed with 1.22e and earlier.
 ['dbl-sp-b', '-d -t', "1\n2\n", "1\n\n2\n\n", 0],
 

tests/rm/fail-2eperm

@@ -31,7 +31,10 @@ touch a/b || framework_failure
 
 # Try to ensure that $NON_ROOT_USERNAME can access
 # the required version of rm.
-rm_version=`setuidgid $NON_ROOT_USERNAME env PATH="$PATH" rm --version|sed -n '1s/.* //p'`
+rm_version=`
+  setuidgid $NON_ROOT_USERNAME env PATH="$PATH" rm --version |
+  sed -n '1s/.* //p'
+`
 case $rm_version in
   $PACKAGE_VERSION) ;;
   *) skip_test_ "cannot access just-built rm as user $NON_ROOT_USERNAME";;

tests/rm/interactive-always

@@ -68,15 +68,15 @@ test -f file4-1 || fail=1
 
 cat <<\EOF > expout || fail=1
 EOF
-cat <<\EOF > experr || fail=1
+sed 's/@remove_empty/rm: remove regular empty file/g' <<\EOF > experr || fail=1
 no WHEN
-rm: remove regular empty file `file1-1'? rm: remove regular empty file `file1-2'? .
+@remove_empty `file1-1'? @remove_empty `file1-2'? .
 WHEN=never
 .
 WHEN=once
 rm: remove all arguments recursively? .
 WHEN=always
-rm: remove regular empty file `file4-1'? rm: remove regular empty file `file4-2'? .
+@remove_empty `file4-1'? @remove_empty `file4-2'? .
 -f overrides --interactive
 .
 --interactive overrides -f