emul/fuse
1
0
Fork 0
mirror of https://git.code.sf.net/p/fuse-emulator/fuse synced 2026-01-27 01:41:34 +03:00
Code Activity
Files
feature-131-embedded-python
fuse/peripherals/if1.c
Fredrick Meunier 160b7e7544 Always set peripheral status to match snapshots 
when they are being loaded
2018-04-03 21:23:16 +10:00

1360 lines
37 KiB
C
Raw Permalink Blame History

/* if1.c: Interface 1 handling routines
Copyright (c) 2004-2016 Gergely Szasz, Philip Kendall
Copyright (c) 2015 Stuart Brady
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License along
with this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
Author contact information:
Gergely: szaszg@hu.inter.net
*/
#include <config.h>
#include <string.h>
#include <errno.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <unistd.h>
#include "compat.h"
#include "debugger/debugger.h"
#include "if1.h"
#include "infrastructure/startup_manager.h"
#include "machine.h"
#include "memory_pages.h"
#include "module.h"
#include "periph.h"
#include "settings.h"
#include "utils.h"
#include "ui/ui.h"
#include "unittests/unittests.h"
#undef IF1_DEBUG_MDR
#undef IF1_DEBUG_NET
#undef IF1_DEBUG_NET_1
#define BUFF_EMPTY 0x100
enum {
SYNC_NO = 0,
SYNC_OK = 0xff
};
/*
Microdrive cartridge
GAP PREAMBLE 15 byte GAP PREAMBLE 15 byte 512 1
[-----][00 00 ... ff ff][BLOCK HEAD][-----][00 00 ... ff ff][REC HEAD][ DATA ][CHK]
Preamble = 10 * 0x00 + 2 * 0xff (12 byte)
*/
typedef struct microdrive_t {
utils_file file;
char *filename; /* old filename */
int inserted;
int modified;
int motor_on;
int head_pos;
int transfered;
int max_bytes;
libspectrum_byte pream[512]; /* preamble/sync area written */
libspectrum_byte last;
libspectrum_byte gap;
libspectrum_byte sync;
libspectrum_microdrive *cartridge; /* write protect, len, blocks */
} microdrive_t;
typedef struct if1_ula_t {
int fd_r; /* file descriptor for reading bytes or bits RS232 */
int fd_t; /* file descriptor for writing bytes or bits RS232 */
int fd_net; /* file descriptor for rw bytes or bits SinclairNET */
int rs232_buffer; /* read buffer */
int s_net_mode;
int status; /* if1_ula/SinclairNET */
int comms_data; /* the previous data comms state */
int comms_clk; /* the previous data comms state */
int cts; /* CTS of peripheral */
int dtr; /* DTR of peripheral */
int tx; /* TxD the name is very kind, because this is the read end of
the TxD wire of DATA machine (really RxD the view of
spectrum */
int rx; /* RxD the name is very kind, because this is the write end of
the RxD wire of DATA machine (really TxD the view of
spectrum */
int data_in; /* interpreted incoming data */
int count_in;
int data_out; /* interpreted outgoing data */
int count_out;
int esc_in; /* if we compose an escape seq */
int net; /* Network in/out (really 1 wire bus :-) */
int net_data; /* Interpreted network data */
int net_state; /* Interpreted network data */
int wait; /* Wait state */
int busy; /* Indicate busy; if1 software never poll it ... */
} if1_ula_t;
/*
7 6 5 4 3 2 1 0
STATUS RO $EF(239) --- --- --- BSY DTR GAP SYN WPR
CONTRO WO $EF(239) --- --- WAT CTS ERA R/w CLK DTA
MDR DT RW $E7(231) D7 D6 D5 D4 D3 D2 D1 D0
COMM I RO $F7(247) TX --- --- --- --- --- --- NET
COMM O WO $F7(247) --- --- --- --- --- --- --- NET/RX
RS232:
DTR -> Data Terminal Ready (DTE -> DCE)
CTS -> Clear To Send (DCE -> DTE)
TX -> Transmitted Data (DTE -> DCE)
RX -> Received Data (DCE -> DTE)
The IF1 serial behaves not as a DTE (Data Terminal Equipment, e.g.
a computer) but as a DCE (Data Communications Equipment, e.g. a modem)
If we were to consider the ZX Spectrum a DTE, we would rename the lines:
DTR := DSR (Data Set Ready)
CTS := RTS (Request To Send)
TX := RX
RX := TX
On the communication channels:
Bytes interpreted as is, except:
0x00 0x00 --> DTR ~~\__
0x00 0x01 --> DTR __/~~
0x00 0x02 --> CTS ~~\__
0x00 0x03 --> CTS __/~~
0x00 ? --> lost
0x00 * --> 0x00
Additionally:
if fuse read 0x00 0x00 => DTR = 0 ~~\__
if fuse read 0x00 0x01 => DTR = 1 __/~~
if CTS = ~~\__ fuse send 0x00 0x02
if CTS = __/~~ fuse send 0x00 0x03
if fuse lost send 0x00 + 0x3f (?)
every other 0x00 + 0x## are discarded
*/
/* 8KB ROM */
#define ROM_SIZE 0x2000
/* One 8KB memory chunk accessible by the Z80 when /ROMCS is low */
static memory_page if1_memory_map_romcs[MEMORY_PAGES_IN_8K];
/* IF1 paged out ROM activated? */
int if1_active = 0;
int if1_available = 0;
static int if1_mdr_status = 0;
int rnd_factor = ( ( RAND_MAX >> 2 ) << 2 ) / 19 + 1;
static microdrive_t microdrive[8]; /* We have 8 microdrive */
static if1_ula_t if1_ula;
static void microdrives_reset( void );
static void microdrives_restart( void );
static void increment_head( int m );
#define MDR_IN(m) microdrive[m - 1].inserted
#define MDR_WP(m) libspectrum_microdrive_write_protect( microdrive[m - 1].cartridge )
enum if1_menu_item {
UMENU_ALL = 0,
UMENU_MDRV1,
UMENU_MDRV2,
UMENU_MDRV3,
UMENU_MDRV4,
UMENU_MDRV5,
UMENU_MDRV6,
UMENU_MDRV7,
UMENU_MDRV8,
UMENU_RS232,
};
enum if1_port {
PORT_MDR,
PORT_CTR,
PORT_NET,
PORT_UNKNOWN,
};
static void if1_reset( int hard_reset );
static void if1_enabled_snapshot( libspectrum_snap *snap );
static void if1_from_snapshot( libspectrum_snap *snap );
static void if1_to_snapshot( libspectrum_snap *snap );
static void if1_port_out( libspectrum_word port, libspectrum_byte val );
static libspectrum_byte if1_port_in( libspectrum_word port, libspectrum_byte *attached );
static module_info_t if1_module_info = {
/* .reset = */ if1_reset,
/* .romcs = */ if1_memory_map,
/* .snapshot_enabled = */ if1_enabled_snapshot,
/* .snapshot_from = */ if1_from_snapshot,
/* .snapshot_to = */ if1_to_snapshot,
};
static const periph_port_t if1_ports[] = {
{ 0x0018, 0x0010, if1_port_in, if1_port_out },
{ 0x0018, 0x0008, if1_port_in, if1_port_out },
{ 0x0018, 0x0000, if1_port_in, if1_port_out },
{ 0, 0, NULL, NULL }
};
static const periph_t if1_periph = {
/* .option = */ &settings_current.interface1,
/* .ports = */ if1_ports,
/* .hard_reset = */ 1,
/* .activate = */ NULL,
};
/* Memory source */
static int if1_memory_source;
/* Debugger events */
static const char * const event_type_string = "if1";
static int page_event, unpage_event;
static void
update_menu( enum if1_menu_item what )
{
if( what == UMENU_ALL || what == UMENU_MDRV1 ) {
ui_menu_activate( UI_MENU_ITEM_MEDIA_IF1_M1_EJECT, MDR_IN( 1 ) );
ui_menu_activate( UI_MENU_ITEM_MEDIA_IF1_M1_WP_SET,
!MDR_IN( 1 ) ? 0 : !MDR_WP( 1 ) );
}
if( what == UMENU_ALL || what == UMENU_MDRV2 ) {
ui_menu_activate( UI_MENU_ITEM_MEDIA_IF1_M2_EJECT, MDR_IN( 2 ) );
ui_menu_activate( UI_MENU_ITEM_MEDIA_IF1_M2_WP_SET,
!MDR_IN( 2 ) ? 0 : !MDR_WP( 2 ) );
}
if( what == UMENU_ALL || what == UMENU_MDRV3 ) {
ui_menu_activate( UI_MENU_ITEM_MEDIA_IF1_M3_EJECT, MDR_IN( 3 ) );
ui_menu_activate( UI_MENU_ITEM_MEDIA_IF1_M3_WP_SET,
!MDR_IN( 3 ) ? 0 : !MDR_WP( 3 ) );
}
if( what == UMENU_ALL || what == UMENU_MDRV4 ) {
ui_menu_activate( UI_MENU_ITEM_MEDIA_IF1_M4_EJECT, MDR_IN( 4 ) );
ui_menu_activate( UI_MENU_ITEM_MEDIA_IF1_M4_WP_SET,
!MDR_IN( 4 ) ? 0 : !MDR_WP( 4 ) );
}
if( what == UMENU_ALL || what == UMENU_MDRV5 ) {
ui_menu_activate( UI_MENU_ITEM_MEDIA_IF1_M5_EJECT, MDR_IN( 5 ) );
ui_menu_activate( UI_MENU_ITEM_MEDIA_IF1_M5_WP_SET,
!MDR_IN( 5 ) ? 0 : !MDR_WP( 5 ) );
}
if( what == UMENU_ALL || what == UMENU_MDRV6 ) {
ui_menu_activate( UI_MENU_ITEM_MEDIA_IF1_M6_EJECT, MDR_IN( 6 ) );
ui_menu_activate( UI_MENU_ITEM_MEDIA_IF1_M6_WP_SET,
!MDR_IN( 6 ) ? 0 : !MDR_WP( 6 ) );
}
if( what == UMENU_ALL || what == UMENU_MDRV7 ) {
ui_menu_activate( UI_MENU_ITEM_MEDIA_IF1_M7_EJECT, MDR_IN( 7 ) );
ui_menu_activate( UI_MENU_ITEM_MEDIA_IF1_M7_WP_SET,
!MDR_IN( 7 ) ? 0 : !MDR_WP( 7 ) );
}
if( what == UMENU_ALL || what == UMENU_MDRV8 ) {
ui_menu_activate( UI_MENU_ITEM_MEDIA_IF1_M8_EJECT, MDR_IN( 8 ) );
ui_menu_activate( UI_MENU_ITEM_MEDIA_IF1_M8_WP_SET,
!MDR_IN( 8 ) ? 0 : !MDR_WP( 8 ) );
}
if( what == UMENU_ALL || what == UMENU_RS232 ) {
ui_menu_activate( UI_MENU_ITEM_MEDIA_IF1_RS232_UNPLUG_R,
( if1_ula.fd_r > -1 ) ? 1 : 0 );
ui_menu_activate( UI_MENU_ITEM_MEDIA_IF1_RS232_UNPLUG_T,
( if1_ula.fd_t > -1 ) ? 1 : 0 );
#ifdef BUILD_WITH_SNET
ui_menu_activate( UI_MENU_ITEM_MEDIA_IF1_SNET_UNPLUG,
( if1_ula.fd_net > -1 ) ? 1 : 0 );
#endif
}
}
static int
if1_init( void *context )
{
int m, i;
if1_ula.fd_r = -1;
if1_ula.fd_t = -1;
if1_ula.dtr = 0; /* No data terminal yet */
if1_ula.cts = 2; /* force to emit first cts status */
if1_ula.comms_clk = 0;
if1_ula.comms_data = 0; /* really? */
if1_ula.fd_net = -1;
if1_ula.s_net_mode = 1;
if1_ula.net = 0;
if1_ula.esc_in = 0; /* empty */
for( m = 0; m < 8; m++ ) {
microdrive[m].cartridge = libspectrum_microdrive_alloc();
microdrive[m].inserted = 0;
microdrive[m].modified = 0;
}
if( settings_current.rs232_rx ) {
if1_plug( settings_current.rs232_rx, 1 );
libspectrum_free( settings_current.rs232_rx );
settings_current.rs232_rx = NULL;
}
if( settings_current.rs232_tx ) {
if1_plug( settings_current.rs232_tx, 2 );
libspectrum_free( settings_current.rs232_tx );
settings_current.rs232_tx = NULL;
}
if( settings_current.snet ) {
if1_plug( settings_current.snet, 3 );
libspectrum_free( settings_current.snet );
settings_current.snet = NULL;
}
module_register( &if1_module_info );
if1_memory_source = memory_source_register( "If1" );
for( i = 0; i < MEMORY_PAGES_IN_8K; i++ )
if1_memory_map_romcs[i].source = if1_memory_source;
periph_register( PERIPH_TYPE_INTERFACE1, &if1_periph );
periph_register_paging_events( event_type_string, &page_event,
&unpage_event );
return 0;
}
static void
if1_end( void )
{
int m;
for( m = 0; m < 8; m++ ) {
libspectrum_error error =
libspectrum_microdrive_free( microdrive[m].cartridge );
if( error ) return;
}
}
void
if1_register_startup( void )
{
startup_manager_module dependencies[] = {
STARTUP_MANAGER_MODULE_DEBUGGER,
STARTUP_MANAGER_MODULE_MEMORY,
STARTUP_MANAGER_MODULE_SETUID,
};
startup_manager_register( STARTUP_MANAGER_MODULE_IF1, dependencies,
ARRAY_SIZE( dependencies ), if1_init, NULL,
if1_end );
}
void
if1_update_menu( void )
{
update_menu( UMENU_ALL );
}
static void
if1_reset( int hard_reset GCC_UNUSED )
{
if1_active = 0;
if1_available = 0;
if( !periph_is_active( PERIPH_TYPE_INTERFACE1 ) ) {
ui_statusbar_update( UI_STATUSBAR_ITEM_MICRODRIVE,
UI_STATUSBAR_STATE_NOT_AVAILABLE );
return;
}
/* Check for an Interface 1 ROM */
if( machine_load_rom_bank( if1_memory_map_romcs, 0,
settings_current.rom_interface_1,
settings_default.rom_interface_1,
ROM_SIZE ) ) {
settings_current.interface1 = 0;
periph_activate_type( PERIPH_TYPE_INTERFACE1, 0 );
ui_statusbar_update( UI_STATUSBAR_ITEM_MICRODRIVE,
UI_STATUSBAR_STATE_NOT_AVAILABLE );
return;
}
machine_current->ram.romcs = 0;
if1_ula.cts = 2; /* force to emit first out if raw */
if1_ula.comms_clk = 0;
if1_ula.comms_data = 0;
if1_ula.net = 0;
if1_ula.esc_in = 0;
microdrives_reset();
update_menu( UMENU_ALL );
ui_statusbar_update( UI_STATUSBAR_ITEM_MICRODRIVE,
UI_STATUSBAR_STATE_INACTIVE );
if1_mdr_status = 0;
if1_available = 1;
}
void
if1_page( void )
{
if1_active = 1;
machine_current->ram.romcs = 1;
machine_current->memory_map();
debugger_event( page_event );
}
void
if1_unpage( void )
{
if1_active = 0;
machine_current->ram.romcs = 0;
machine_current->memory_map();
debugger_event( unpage_event );
}
void
if1_memory_map( void )
{
if( !if1_active ) return;
memory_map_romcs_8k( 0x0000, if1_memory_map_romcs );
memory_map_romcs_8k( 0x2000, if1_memory_map_romcs );
}
static void
if1_enabled_snapshot( libspectrum_snap *snap )
{
settings_current.interface1 = libspectrum_snap_interface1_active( snap );
}
static void
if1_from_snapshot( libspectrum_snap *snap )
{
if( !libspectrum_snap_interface1_active( snap ) ) return;
if( libspectrum_snap_interface1_custom_rom( snap ) &&
libspectrum_snap_interface1_rom( snap, 0 ) &&
libspectrum_snap_interface1_rom_length( snap, 0 ) >= ROM_SIZE &&
machine_load_rom_bank_from_buffer(
if1_memory_map_romcs, 0,
libspectrum_snap_interface1_rom( snap, 0 ),
ROM_SIZE, 1 ) )
return;
if( libspectrum_snap_interface1_paged( snap ) ) {
if1_page();
} else {
if1_unpage();
}
}
static void
if1_to_snapshot( libspectrum_snap *snap )
{
libspectrum_byte *buffer;
int i;
if( !periph_is_active( PERIPH_TYPE_INTERFACE1 ) ) return;
libspectrum_snap_set_interface1_active( snap, 1 );
libspectrum_snap_set_interface1_paged ( snap, if1_active );
libspectrum_snap_set_interface1_drive_count( snap, 8 );
if( if1_memory_map_romcs[0].save_to_snapshot ) {
libspectrum_snap_set_interface1_custom_rom( snap, 1 );
libspectrum_snap_set_interface1_rom_length( snap, 0, ROM_SIZE );
buffer = libspectrum_new( libspectrum_byte, ROM_SIZE );
for( i = 0; i < MEMORY_PAGES_IN_8K; i++ )
memcpy( buffer + i * MEMORY_PAGE_SIZE,
if1_memory_map_romcs[ i ].page, MEMORY_PAGE_SIZE );
libspectrum_snap_set_interface1_rom( snap, 0, buffer );
}
}
static void
microdrives_reset( void )
{
int m;
for( m = 0; m < 8; m++ ) {
microdrive[m].head_pos = 0;
microdrive[m].motor_on = 0; /* motor off */
microdrive[m].gap = 15;
microdrive[m].sync = 15;
microdrive[m].transfered = 0;
}
ui_statusbar_update( UI_STATUSBAR_ITEM_MICRODRIVE,
UI_STATUSBAR_STATE_INACTIVE );
if1_mdr_status = 0;
/*
if1_ula.comms_data = 0;
if1_ula.count_in = 0;
if1_ula.count_out = 0;
if1_ula.cts = 0;
if1_ula.dtr = 0;
if1_ula.wait = 0;
if1_ula.busy = 0;
if1_ula.net = 0;
if1_ula.net_state = 0;
*/
}
static enum if1_port
decode_port( libspectrum_word port )
{
switch( port & 0x0018 ) {
case 0x0000: return PORT_MDR;
case 0x0008: return PORT_CTR;
case 0x0010: return PORT_NET;
default: return PORT_UNKNOWN;
}
}
static libspectrum_byte
port_mdr_in( void )
{
libspectrum_byte ret = 0xff;
int m;
for( m = 0; m < 8; m++ ) {
microdrive_t *mdr = &microdrive[ m ];
if( mdr->motor_on && mdr->inserted ) {
if( mdr->transfered < mdr->max_bytes ) {
mdr->last = libspectrum_microdrive_data( mdr->cartridge,
mdr->head_pos );
increment_head( m );
}
mdr->transfered++;
ret &= mdr->last; /* I assume negative logic, but how know? */
}
}
return ret;
}
static libspectrum_byte
port_ctr_in( void )
{
libspectrum_byte ret = 0xff;
int m, block;
for( m = 0; m < 8; m++ ) {
microdrive_t *mdr = &microdrive[ m ];
if( mdr->motor_on && mdr->inserted ) {
block = mdr->head_pos / 543 + ( mdr->max_bytes == 15 ? 0 : 256 );
if( mdr->pream[block] == SYNC_OK ) { /* if formatted */
if( mdr->gap ) {
/* ret &= 0xff; GAP and SYNC high ? */
mdr->gap--;
} else {
ret &= 0xf9; /* GAP and SYNC low */
if( mdr->sync ) {
mdr->sync--;
} else {
mdr->gap = 15;
mdr->sync = 15;
}
}
}
/* if write protected */
if( libspectrum_microdrive_write_protect( mdr->cartridge) )
ret &= 0xfe; /* active bit */
}
}
/* Here we have to poll, the if1_ula DTR 'line' */
if( if1_ula.rs232_buffer > 0xff ) { /* buffer empty */
unsigned char byte;
int yes = 1;
while( yes && read( if1_ula.fd_r, &byte, 1 ) == 1 ) {
if( if1_ula.esc_in == 1 ) {
if1_ula.esc_in = 0;
if( byte == '*' ) {
if1_ula.rs232_buffer = 0x00;
yes = 0;
} else if( byte == 0x00 ) {
if( settings_current.rs232_handshake )
if1_ula.dtr = 0;
} else if( byte == 0x01 ) {
if( settings_current.rs232_handshake )
if1_ula.dtr = 1;
}
} else if( byte == 0x00 ) {
if1_ula.esc_in = 1;
} else {
if1_ula.rs232_buffer = byte;
yes = 0;
break;
}
}
}
if( if1_ula.dtr == 0 )
ret &= 0xf7; /* %11110111 */
/* Here we have to poll, the 'SinclairNet' busy flag but never used by
software in Interface 1 */
if( if1_ula.busy == 0 )
ret &= 0xef; /* %11101111 */
/* fprintf( stderr, "Read CTR ( %%%d%d%d%d%d%d%d%d ).\n",
!!(ret & 128), !!(ret & 64), !!(ret & 32), !!(ret & 16),
!!(ret & 8), !!(ret & 4), !!(ret & 2), !!(ret & 1)); */
microdrives_restart();
return ret;
}
/*
return 1 if read a byte
0 if nothing interesting...
*/
static int
read_rs232( void )
{
if( if1_ula.rs232_buffer <= 0xff ) { /* we read from the buffer */
if1_ula.data_in = if1_ula.rs232_buffer;
if1_ula.rs232_buffer = 0x0100;
return 1;
}
while( read( if1_ula.fd_r, &if1_ula.data_in, 1 ) == 1 ) {
if( if1_ula.esc_in == 1 ) {
if1_ula.esc_in = 0;
if( if1_ula.data_in == '*' ) {
if1_ula.data_in = 0x00;
return 1;
} else if( if1_ula.data_in == 0x00 ) {
if( settings_current.rs232_handshake )
if1_ula.dtr = 0;
} else if( if1_ula.data_in == 0x01 ) {
if( settings_current.rs232_handshake )
if1_ula.dtr = 1;
}
} else if( if1_ula.data_in == 0x00 ) {
if1_ula.esc_in = 1;
} else {
return 1;
}
}
return 0;
}
static libspectrum_byte
port_net_in( void )
{
libspectrum_byte ret = 0xff;
if( if1_ula.fd_r == -1 )
goto no_rs232_in;
/* Here is the RS232 input routine */
if( if1_ula.cts ) { /* If CTS == 1 */
if( if1_ula.count_in == 0 ) {
if( if1_ula.fd_r >= 0 && read_rs232() == 1 ) {
if1_ula.count_in++; /* Ok, if read a byte, we begin */
}
if1_ula.tx = 0; /* now send __ to if1
later we raise :-) */
} else if( if1_ula.count_in >= 1 && if1_ula.count_in < 5 ) {
if1_ula.tx = 1; /* send ~~ (start bit :-) */
if1_ula.count_in++;
} else if( if1_ula.count_in >= 5 && if1_ula.count_in < 13 ) {
if1_ula.tx = ( if1_ula.data_in & 0x01 ) ? 0 : 1;
/* send .. (data bits :-) */
if1_ula.data_in >>= 1; /* prepare next bit :-) */
if1_ula.count_in++;
} else
if1_ula.count_in = 0;
} else { /* if( if1_ula.cts ) */
if1_ula.count_in = 0; /* reset serial in */
if1_ula.tx = 0; /* send __ stop bits or s.e. :-) */
}
no_rs232_in:
if( if1_ula.fd_net == -1 )
goto no_snet_in;
if( if1_ula.s_net_mode == 0 ) { /* if we do raw */
/* Here is the input routine */
read( if1_ula.fd_net, &if1_ula.net, 1 ); /* Ok, if no byte, we send last*/
} else {/* if( if1_ula.s_net_mode == 1 ) if we do interpreted */
/* Here is the input routine. There are several stage in input
and output. So first for output. if1 first do SEND-SC
(http://www.wearmouth.demon.co.uk/if1_2.htm#L101E) to send
a Sync-Out signal and SEND-SC do first a NET-STATE
(http://www.wearmouth.demon.co.uk/if1_2.htm#L0FBC) to see
the line activity:
11xxxxxx times (192-255) have to get a zero (bit for network)
plus 1 times more from SEND-SC. Next SEND-SC send a 0 which is
a 1 on the net wire (negated output, straight input!!!)
OK. In input first if1 call WT-SC-E to check Network activity
(http://www.wearmouth.demon.co.uk/if1_2.htm#L0FD3). Now check
128 times the net wire (we do two round, because to differentiate
net out routines...)
*/
if( if1_ula.net_state < 0x0100 ) { /* if1 may in NET-STATE */
if1_ula.net_state++;
if1_ula.net = 0;
#ifdef IF1_DEBUG_NET
fprintf( stderr, "NET-STAT(%03d)? We send 0!\n", if1_ula.net_state );
#endif
} else if( if1_ula.net_state == 0x0100 ) { /* probably waiting for input */
if( read( if1_ula.fd_net, &if1_ula.net_data, 1 ) == 1 ) {
if1_ula.net_state++;
if1_ula.net = 1; /* Start with __/~~ */
} /* Ok, if have a byte, we send it! */
} else if( if1_ula.net_state == 0x0101 ) {
if1_ula.net_state++;
if1_ula.net = 1; /* one more ~~ */
} else if( if1_ula.net_state > 0x0101 &&
if1_ula.net_state < 0x010a ) { /* we send the data bits... */
if1_ula.net_state++;
if1_ula.net = if1_ula.net_data & 1;
if1_ula.net_data >>= 1;
} else if( if1_ula.net_state == 0x010a ) {
if1_ula.net = 0;
if1_ula.net_state = 0; /* OK, we starting a new byte... */
#ifdef IF1_DEBUG_NET
fprintf( stderr, "NET-STAT(%03d)? Get a byte!\n", if1_ula.net_state );
#endif
}
}
no_snet_in:
if( !if1_ula.tx )
ret &= 0x7f;
if( !if1_ula.net )
ret &= 0xfe;
microdrives_restart();
return ret;
}
static libspectrum_byte
if1_port_in( libspectrum_word port GCC_UNUSED, libspectrum_byte *attached )
{
libspectrum_byte ret = 0xff;
*attached = 0xff; /* TODO: check this */
switch( decode_port( port ) )
{
case PORT_MDR: ret &= port_mdr_in(); break;
case PORT_CTR: ret &= port_ctr_in(); break;
case PORT_NET: ret &= port_net_in(); break;
case PORT_UNKNOWN: break;
}
return ret;
}
static void
port_mdr_out( libspectrum_byte val )
{
int m, block;
/* allow access to the port only if motor 1 is ON and there's a file open */
for( m = 0; m < 8; m++ ) {
microdrive_t *mdr = &microdrive[ m ];
if( mdr->motor_on && mdr->inserted ) {
#ifdef IF1_DEBUG_MDR
fprintf(stderr, "#%05d %03d(%03d): 0x%02x\n",
mdr->head_pos, mdr->transfered, mdr->max_bytes, val );
#endif
block = mdr->head_pos / 543 + ( mdr->max_bytes == 15 ? 0 : 256 );
if( mdr->transfered == 0 && val == 0x00 ) { /* start pream */
mdr->pream[block] = 1;
} else if( mdr->transfered > 0 && mdr->transfered < 10 && val == 0x00 ) {
mdr->pream[block]++;
} else if( mdr->transfered > 9 && mdr->transfered < 12 && val == 0xff ) {
mdr->pream[block]++;
} else if( mdr->transfered == 12 && mdr->pream[block] == 12 ) {
mdr->pream[block] = SYNC_OK;
}
if( mdr->transfered > 11 &&
mdr->transfered < mdr->max_bytes + 12 ) {
libspectrum_microdrive_set_data( mdr->cartridge, mdr->head_pos,
val );
increment_head( m );
mdr->modified = 1;
}
mdr->transfered++;
}
}
}
static void
port_ctr_out( libspectrum_byte val )
{
int m;
if( !( val & 0x02 ) && ( if1_ula.comms_clk ) ) { /* ~~\__ */
for( m = 7; m > 0; m-- ) {
/* Rotate one drive */
microdrive[m].motor_on = microdrive[m - 1].motor_on;
}
microdrive[0].motor_on = (val & 0x01) ? 0 : 1;
if( microdrive[0].motor_on || microdrive[1].motor_on ||
microdrive[2].motor_on || microdrive[3].motor_on ||
microdrive[4].motor_on || microdrive[5].motor_on ||
microdrive[6].motor_on || microdrive[7].motor_on ) {
if( !if1_mdr_status ) {
ui_statusbar_update( UI_STATUSBAR_ITEM_MICRODRIVE,
UI_STATUSBAR_STATE_ACTIVE );
if1_mdr_status = 1;
}
} else if ( if1_mdr_status ) {
ui_statusbar_update( UI_STATUSBAR_ITEM_MICRODRIVE,
UI_STATUSBAR_STATE_INACTIVE );
if1_mdr_status = 0;
}
}
if( val & 0x01 ) { /* comms_data == 1 */
/* Interface 1 service manual p.:1.4 par.: 1.5.1
The same pin on IC1 (if1 ULA), pin 33, is used for the network
transmit data and for the RS232 transmit data. In order to select
the required function IC1 uses its COMMS_OUT (pin 30) signal,
borrowed from the microdrive control when the microdrive is not
being used (I do not know what it is exactly meaning. It is a
hardware not being used, or a software should not use..?) This signal
is routed from pin 30 to the emitter of transistor Q3 (RX DATA) and
via resistor R4, to the base of transistor Q1 (NET). When COMMS_OUT
is high Q3 is enabled this selecting RS232, and when it is low
Q1 is enabled selecting the network.
OK, the schematics offer a different interpretation, because if
COMMS_OUT pin level high (>+3V) then Q3 is off (the basis cannot
be more higher potential then emitter (NPN transistor), so whatever
is on the IC1 RX DATA (pin 33) the basis of Q4 is always on +12V,
so the collector of Q4 (PNP transistor) always on -12V.
If COMMS_OUT pin level goes low (~0V), then Q3 basis (connected
to IC1 RX DATA pin) can be higher level (>+3V) than emitter, so
the basis potential of Q4 depend on IC1 RX DATA.
OK, Summa summarum I assume that, the COMMS OUT pin is a
negated output of the if1 ULA CTR register's COMMS DATA bit.
*/
/* C_DATA = 1 */
if( if1_ula.comms_data == 0 ) {
if1_ula.count_out = 0;
if1_ula.data_out = 0;
if1_ula.count_in = 0;
if1_ula.data_in = 0;
}
}
if1_ula.wait = ( val & 0x20 ) ? 1 : 0;
if1_ula.comms_data = ( val & 0x01 ) ? 1 : 0;
if1_ula.comms_clk = ( val & 0x02 ) ? 1 : 0;
val = ( val & 0x10 ) ? 1 : 0;
if( settings_current.rs232_handshake &&
if1_ula.fd_t != -1 && if1_ula.cts != val ) {
char data = val ? 0x03 : 0x02;
do {} while( write( if1_ula.fd_t, "", 1 ) != 1 );
do {} while( write( if1_ula.fd_t, &data, 1 ) != 1 );
}
if1_ula.cts = val;
#ifdef IF1_DEBUG_NET
fprintf( stderr, "Set CTS to %d, set WAIT to %d and COMMS_DATA to %d\n",
if1_ula.cts, if1_ula.wait, if1_ula.comms_data );
#endif
microdrives_restart();
}
static void
port_net_out( libspectrum_byte val )
{
if( if1_ula.fd_t == -1 )
return; /* nothing to write */
if( if1_ula.comms_data == 1 ) { /* OK, RS232 */
val &= 0x01;
if( if1_ula.count_out == 0 && !val ) { /* waiting for ~~\__ */
if1_ula.count_out++;
} else if( if1_ula.count_out == 1 ) {
if( if1_ula.cts != 0 || !val )
if1_ula.count_out = -1;
else
if1_ula.count_out++; /* else get the start bit __/~~ */
} else if( if1_ula.count_out >= 2 && if1_ula.count_out <= 9 ) {
if1_ula.data_out >>= 1;
if1_ula.data_out |= val & 0x01 ? 0 : 128;
if1_ula.count_out++; /* waiting for next data bit */
} else if( if1_ula.count_out >= 10 && if1_ula.count_out <= 11 ) {
if( val )
if1_ula.count_out = -1;
else
if1_ula.count_out++;
} else if( if1_ula.count_out == 12 ) {
if( !val )
if1_ula.count_out = -1;
else
if1_ula.count_out++;
} else if( if1_ula.count_out == 13 ) {
if( val )
if1_ula.count_out = -1;
}
if( if1_ula.count_out == -1 ) {
if1_ula.count_out = 13;
if1_ula.data_out = '?';
do {} while( write( if1_ula.fd_t, "", 1 ) != 1 );
}
if( if1_ula.count_out == 13 ) {
/* Here is the output routine */
if( if1_ula.data_out == 0x00 ) {
if1_ula.data_out = '*';
do {} while( write( if1_ula.fd_t, "", 1 ) != 1 );
}
do {} while( write( if1_ula.fd_t, &if1_ula.data_out, 1 ) != 1 );
if1_ula.count_out = 0;
}
if1_ula.rx = val & 0x01; /* set rx */
} else { /* if( if1_ula.comms_data == 1 ) SinclairNET :-)*/
if( if1_ula.s_net_mode == 0 ) { /* if we out bit by bit, do it */
/* Here is the output routine */
/* OK, examining the schematics of if1 and the disassembly of if1 ROM, I
see that the Q1 and Q2 transistors negate the RX DATA signal, and the
floating state of the net wire is the ~0V level, the forced is the ~3V.
The if1 software send complemented data and read straight data.
*/
if1_ula.net = ( val & 0x01 ) ? 0 : 1; /* set rx */
lseek( if1_ula.fd_net, 0, SEEK_SET ); /* we save only the state of the wire*/
do {} while( write( if1_ula.fd_net, &if1_ula.net, 1 ) == -1 );
#ifdef HAVE_FSYNC
fsync( if1_ula.fd_net );
#endif /* #ifdef HAVE_FSYNC */
#ifdef IF1_DEBUG_NET
fprintf( stderr, "Send SinclairNET: %d\n", if1_ula.net );
#endif
} else { /* if( if1_ula.s_net_mode == 0 ) if we out byte by byte, do it */
if( if1_ula.net_state >= 0x0200 && if1_ula.net_state < 0x0208 ) {
if1_ula.net_state++;
if1_ula.net_data <<= 1;
if1_ula.net_data |= ( val & 0x01 ) ? 0 : 1;
} else if( if1_ula.net_state == 0x0208 ) {
if1_ula.net_data &= 0xff;
if1_ula.net_state++; /* OK, now we get data bytes... */
/* lseek( if1_ula.fd_net, 0, SEEK_SET ); start a packet */
/* first we send the station number */
do {} while( write( if1_ula.fd_net, &if1_ula.net_data, 1 ) == -1 );
#ifdef HAVE_FSYNC
fsync( if1_ula.fd_net );
#endif /* #ifdef HAVE_FSYNC */
#ifdef IF1_DEBUG_NET
fprintf( stderr, "SC-OUT send network number: %d\n",
if1_ula.net_data ^ 0xff );
#endif
} else if( if1_ula.net_state > 192 && if1_ula.net_state < 0x0200 &&
( ( val & 0x01 ) == 0 ) ) {
/* NET-STATE ask as many times.... and now send a 0 */
/* if1_ula.net = 1; */
if1_ula.net_state = 0x0200; /* Send the station number */
}
if1_ula.net = ( val & 0x01 ) ? 0 : 1; /* set net wire? */
}
}
microdrives_restart();
}
static void
if1_port_out( libspectrum_word port GCC_UNUSED, libspectrum_byte val )
{
#ifdef IF1_DEBUG_NET_1
fprintf( stderr, "In if1_port_out( %%%d%d%d%d%d%d%d%d => 0x%04x ).\n",
!!(val & 128), !!(val & 64), !!(val & 32), !!(val & 16),
!!(val & 8), !!(val & 4), !!(val & 2), !!(val & 1), port);
#endif
switch( decode_port( port ) ) {
case PORT_MDR: port_mdr_out( val ); break;
case PORT_CTR: port_ctr_out( val ); break;
case PORT_NET: port_net_out( val ); break;
case PORT_UNKNOWN: break;
}
}
static void
increment_head( int m )
{
microdrive[m].head_pos++;
if( microdrive[m].head_pos >=
libspectrum_microdrive_cartridge_len( microdrive[m].cartridge ) *
LIBSPECTRUM_MICRODRIVE_BLOCK_LEN )
microdrive[m].head_pos = 0;
}
static void
microdrives_restart( void )
{
int m;
for( m = 0; m < 8; m++ ) {
while( ( microdrive[m].head_pos % LIBSPECTRUM_MICRODRIVE_BLOCK_LEN ) != 0 &&
( microdrive[m].head_pos % LIBSPECTRUM_MICRODRIVE_BLOCK_LEN ) != LIBSPECTRUM_MICRODRIVE_HEAD_LEN )
increment_head( m ); /* put head in the start of a block */
microdrive[m].transfered = 0; /* reset current number of bytes written */
if( ( microdrive[m].head_pos % LIBSPECTRUM_MICRODRIVE_BLOCK_LEN ) == 0 ) {
microdrive[m].max_bytes = LIBSPECTRUM_MICRODRIVE_HEAD_LEN; /* up to 15 bytes for header blocks */
} else {
microdrive[m].max_bytes = LIBSPECTRUM_MICRODRIVE_HEAD_LEN + LIBSPECTRUM_MICRODRIVE_DATA_LEN + 1; /* up to 528 bytes for data blocks */
}
}
}
void
if1_mdr_writeprotect( int drive, int wrprot )
{
libspectrum_microdrive_set_write_protect( microdrive[drive].cartridge,
wrprot ? 1 : 0 );
microdrive[drive].modified = 1;
update_menu( UMENU_MDRV1 + drive );
}
static void
if1_mdr_new( microdrive_t *mdr )
{
libspectrum_byte len;
long int i;
mdr->filename = NULL;
if( settings_current.mdr_random_len ) { /* Random length */
len = 171 + ( ( rand() >> 2 ) + ( rand() >> 2 ) +
( rand() >> 2 ) + ( rand() >> 2 ) )
/ rnd_factor;
} else
len = settings_current.mdr_len = settings_current.mdr_len < 10 ? 10 :
settings_current.mdr_len > LIBSPECTRUM_MICRODRIVE_BLOCK_MAX ? LIBSPECTRUM_MICRODRIVE_BLOCK_MAX : settings_current.mdr_len;
/* Erase the entire cartridge */
libspectrum_microdrive_set_cartridge_len( mdr->cartridge, len );
for( i = 0; i < len * LIBSPECTRUM_MICRODRIVE_BLOCK_LEN; i++ )
libspectrum_microdrive_set_data( mdr->cartridge, i, 0xff );
for( i = libspectrum_microdrive_cartridge_len( mdr->cartridge );
i > 0; i-- )
mdr->pream[255 + i] = mdr->pream[i-1] = SYNC_NO;
/* but don't write-protect */
libspectrum_microdrive_set_write_protect( mdr->cartridge, 0 );
mdr->inserted = 1;
mdr->modified = 1;
}
int
if1_mdr_insert( int which, const char *filename )
{
microdrive_t *mdr;
int m, i;
if( which == -1 ) { /* find an empty one */
for( m = 0; m < 8; m++ ) {
if( !microdrive[m].inserted ) {
which = m;
break;
}
}
}
if( which == -1 ) {
ui_error( UI_ERROR_ERROR,
"Cannot insert cartridge '%s', all Microdrives in use",
filename );
return 1;
}
if( which >= 8 ) {
ui_error( UI_ERROR_ERROR, "if1_mdr_insert: unknown drive %d", which );
return 1;
}
mdr = &microdrive[ which ];
/* Eject any cartridge already in the drive */
if( mdr->inserted ) {
/* Abort the insert if we want to keep the current cartridge */
if( if1_mdr_eject( which ) ) return 0;
}
if( filename == NULL ) { /* insert new unformatted cartridge */
if1_mdr_new( mdr );
update_menu( UMENU_MDRV1 + which );
return 0;
}
if( utils_read_file( filename, &mdr->file ) ) {
ui_error( UI_ERROR_ERROR, "Failed to open cartridge image" );
return 1;
}
if( libspectrum_microdrive_mdr_read( mdr->cartridge, mdr->file.buffer,
mdr->file.length ) ) {
utils_close_file( &mdr->file );
ui_error( UI_ERROR_ERROR, "Failed to open cartridge image" );
return 1;
}
utils_close_file( &mdr->file );
mdr->inserted = 1;
mdr->modified = 0;
mdr->filename = utils_safe_strdup( filename );
/* we assume formatted cartridges */
for( i = libspectrum_microdrive_cartridge_len( mdr->cartridge );
i > 0; i-- )
mdr->pream[255 + i] = mdr->pream[i-1] = SYNC_OK;
update_menu( UMENU_MDRV1 + which );
return 0;
}
int
if1_mdr_eject( int which )
{
microdrive_t *mdr;
if( which >= 8 )
return 1;
mdr = &microdrive[ which ];
if( !mdr->inserted )
return 0;
if( mdr->modified ) {
ui_confirm_save_t confirm = ui_confirm_save(
"Cartridge in Microdrive %i has been modified.\n"
"Do you want to save it?",
which + 1
);
switch( confirm ) {
case UI_CONFIRM_SAVE_SAVE:
if( if1_mdr_save( which, 0 ) ) return 1; /* first save */
break;
case UI_CONFIRM_SAVE_DONTSAVE: break;
case UI_CONFIRM_SAVE_CANCEL: return 1;
}
}
mdr->inserted = 0;
if( mdr->filename != NULL ) {
libspectrum_free( mdr->filename );
mdr->filename = NULL;
}
update_menu( UMENU_MDRV1 + which );
return 0;
}
int
if1_mdr_save( int which, int saveas )
{
microdrive_t *mdr;
if( which >= 8 )
return 1;
mdr = &microdrive[ which ];
if( !mdr->inserted )
return 0;
if( mdr->filename == NULL ) saveas = 1;
if( ui_mdr_write( which, saveas ) ) return 1;
mdr->modified = 0;
return 0;
}
int
if1_mdr_write( int which, const char *filename )
{
microdrive_t *mdr = &microdrive[which];
libspectrum_microdrive_mdr_write( mdr->cartridge, &mdr->file.buffer,
&mdr->file.length );
if( filename == NULL ) filename = mdr->filename; /* Write over the original file */
if( utils_write_file( filename, mdr->file.buffer, mdr->file.length ) )
return 1;
if( mdr->filename && strcmp( filename, mdr->filename ) ) {
libspectrum_free( mdr->filename );
mdr->filename = utils_safe_strdup( filename );
}
return 0;
}
#ifndef O_NONBLOCK
#define O_NONBLOCK FNDELAY
#endif
void
if1_plug( const char *filename, int what )
{
#ifdef WIN32
ui_error( UI_ERROR_ERROR, "Not yet implemented on Win32" );
return;
#else
int fd = -1;
switch( what ) {
case 1:
if( if1_ula.fd_r >= 0 )
close( if1_ula.fd_r );
fd = if1_ula.fd_r = open( filename, O_RDWR | O_NONBLOCK );
if( fcntl( fd, F_SETFL, O_RDONLY | O_NONBLOCK ) )
ui_error( UI_ERROR_ERROR, "Cannot set O_RDONLY on '%s': %s",
filename, strerror( errno ) );
if1_ula.rs232_buffer = 0x100; /* buffer is empty */
break;
case 2:
if( if1_ula.fd_t >= 0 )
close( if1_ula.fd_t );
fd = if1_ula.fd_t = open( filename, O_RDWR | O_NONBLOCK );
if( fcntl( fd, F_SETFL, O_WRONLY | O_NONBLOCK ) )
ui_error( UI_ERROR_ERROR, "Cannot set O_WRONLY on '%s': %s",
filename, strerror( errno ) );
break;
case 3:
if( if1_ula.fd_net >= 0 )
close( if1_ula.fd_net );
fd = if1_ula.fd_net = open( filename, O_RDWR | O_NONBLOCK );
break;
}
/* rs232_handshake == 0 -> we assume DTR(DSR) always 1 if tx and rx plugged */
if( !settings_current.rs232_handshake &&
if1_ula.fd_t != -1 && if1_ula.fd_r != -1 )
if1_ula.dtr = 1;
if( fd < 0 ) {
ui_error( UI_ERROR_ERROR, "Error opening '%s': %s",
filename, strerror( errno ) );
return;
}
if1_ula.s_net_mode = settings_current.raw_s_net ? 0 : 1;
update_menu( UMENU_RS232 );
#endif
}
void
if1_unplug( int what )
{
switch( what ) {
case 1:
if( if1_ula.fd_r >= 0 )
close( if1_ula.fd_r );
if1_ula.fd_r = -1;
break;
case 2:
if( if1_ula.fd_t >= 0 )
close( if1_ula.fd_t );
if1_ula.fd_t = -1;
if1_ula.dtr = 0;
break;
case 3:
if( if1_ula.fd_net >= 0 )
close( if1_ula.fd_net );
if1_ula.fd_net = -1;
break;
}
/* rs232_handshake == 0 -> we assume DTR(DSR) always 1 if tx and rx plugged */
if( !settings_current.rs232_handshake &&
( if1_ula.fd_t == -1 || if1_ula.fd_r == -1 ) )
if1_ula.dtr = 0;
update_menu( UMENU_RS232 );
}
int
if1_unittest( void )
{
int r = 0;
if1_page();
r += unittests_assert_8k_page( 0x0000, if1_memory_source, 0 );
r += unittests_assert_8k_page( 0x2000, if1_memory_source, 0 );
r += unittests_assert_16k_ram_page( 0x4000, 5 );
r += unittests_assert_16k_ram_page( 0x8000, 2 );
r += unittests_assert_16k_ram_page( 0xc000, 0 );
if1_unpage();
r += unittests_paging_test_48( 2 );
return r;
}
View Git Blame Copy Permalink