The `docker info` code was shelling out to obtain the
version of containerd (using the `--version` flag).
Parsing the output of this version string is error-prone,
and not needed, as the containerd API can return the
version.
This patch adds a `Version()` method to the containerd Client
interface, and uses this to get the containerd version.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Upstream-commit: fec2b144feaaa18998ec2ed34c9bc843c4c29abd
Component: engine
/dev is mounted on a tmpfs inside of a container. Processes inside of containers
some times need to create devices nodes, or to setup a socket that listens on /dev/log
Allowing these containers to run with the --readonly flag makes sense. Making a tmpfs
readonly does not add any security to the container, since there is plenty of places
where the container can write tmpfs content.
I have no idea why /dev was excluded.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Upstream-commit: 5f3bd2473ee2a1b9f37ba0130e934133d0e01f89
Component: engine
If the user specifies a mountpath from the host, we should not be
attempting to chown files outside the daemon's metadata directory
(represented by `daemon.repository` at init time).
This forces users who want to use user namespaces to handle the
ownership needs of any external files mounted as network files
(/etc/resolv.conf, /etc/hosts, /etc/hostname) separately from the
daemon. In all other volume/bind mount situations we have taken this
same line--we don't chown host file content.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com>
Upstream-commit: 42716dcf5c986e4cbb51f480f2782c05e5bd0b41
Component: engine
Log drivers may have an internal buffer size that can be accommodated
by the copier as it is more effective to buffer and send fewer though
larger messages that the log driver can consume.
This eliminates the need for Partial handling for drivers that do not
support the concept (ie: awslogs, which can only have events up to
service limits).
Signed-off-by: Jacob Vallejo <jakeev@amazon.com>
Upstream-commit: e1ada0b885b31de0bb0e79b4d99ae4d48b65f721
Component: engine
This adds a mechanism (read-only) to check for project quota support
in a standard way. This mechanism is leveraged by the tests, which
test for the following:
1. Can we get a quota controller?
2. Can we set the quota for a particular directory?
3. Is the quota being over-enforced?
4. Is the quota being under-enforced?
5. Can we retrieve the quota?
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Upstream-commit: 6966dc0aa9134c518babcbf1f02684cae5374843
Component: engine
Do not print "Data file" and "Metadata file" if they're
not used, and sort/group output.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Upstream-commit: 8f702de9b705ced68b6244239ac81d86ebdd6b0a
Component: engine
Currently, if a container removal has failed for some reason,
any client waiting for removal (e.g. `docker run --rm`) is
stuck, waiting for removal to succeed while it has failed already.
For more details and the reproducer, please check
https://github.com/moby/moby/issues/34945
This commit addresses that by allowing `ContainerWait()` with
`container.WaitCondition == "removed"` argument to return an
error in case of removal failure. The `ContainerWaitOKBody`
stucture returned to a client is amended with a pointer to `struct Error`,
containing an error message string, and the `Client.ContainerWait()`
is modified to return the error, if any, to the client.
Note that this feature is only available for API version >= 1.34.
In order for the old clients to be unstuck, we just close the connection
without writing anything -- this causes client's error.
Now, docker-cli would need a separate commit to bump the API to 1.34
and to show an error returned, if any.
[v2: recreate the waitRemove channel after closing]
[v3: document; keep legacy behavior for older clients]
[v4: convert Error from string to pointer to a struct]
[v5: don't emulate old behavior, send empty response in error case]
[v6: rename legacy* vars to include version suffix]
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Upstream-commit: f963500c544daa3c158c0ca3d2985295c875cb6b
Component: engine
This changeset allows Docker's VFS, and Overlay to take advantage of
Linux's zerocopy APIs.
The copy function first tries to use the ficlone ioctl. Reason being:
- they do not allow partial success (aka short writes)
- clones are expected to be a fast metadata operation
See: http://oss.sgi.com/archives/xfs/2015-12/msg00356.html
If the clone fails, we fall back to copy_file_range, which internally
may fall back to splice, which has an upper limit on the size
of copy it can perform. Given that, we have to loop until the copy
is done.
For a given dirCopy operation, if the clone fails, we will not try
it again during any other file copy. Same is true with copy_file_range.
If all else fails, we fall back to traditional copy.
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Upstream-commit: 3ec4ec2857c714387e7b59c2cf324565f6ae55e2
Component: engine
For obvious reasons that it is not really supported now.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Upstream-commit: 5a9b5f10cf967f31f0856871ad08f9a0286b4a46
Component: engine
The shutdown timeout for containers in insufficient on Windows. If the daemon is shutting down, and a container takes longer than expected to shut down, this can cause the container to remain in a bad state after restart, and never be able to start again. Increasing the timeout makes this less likely to occur.
Signed-off-by: Darren Stahl <darst@microsoft.com>
Upstream-commit: ed74ee127f42f32ee98be7b908e1562b1c0554d7
Component: engine
Before this commit if "--config-file" wasn't set the daemon would use
the default configuration file which is "/etc/docker/daemon.json".
When attempting to reload the daemon if that file didn't exist
and error message would display.
This behaviour is changed in a way that if the default configuration
file does not exist and no other configuration file is set
the daemon uses an empty configuration which later will be updated
and reloaded using the "reload" function given as an argument in Reload.
However, if the "--config-file" is set and the file is removed
or renamed an error message will be displayed and no reload will be done.
Signed-off-by: Boaz Shuster <ripcurld.github@gmail.com>
Upstream-commit: 0f8119a87dc301e9543c45c416d6b4545da1fc46
Component: engine
When runc is bind-mounting a particular path "with options", it has to
do so by first creating a bind-mount and the modifying the options of
said bind-mount via remount. However, in a user namespace, there are
restrictions on which flags you can change with a remount (due to
CL_UNPRIVILEGED being set in this instance). Docker historically has
ignored this, and as a result, internal Docker mounts (such as secrets)
haven't worked with --userns-remap. Fix this by preserving
CL_UNPRIVILEGED mount flags when Docker is spawning containers with user
namespaces enabled.
Ref: https://github.com/opencontainers/runc/pull/1603
Signed-off-by: Aleksa Sarai <asarai@suse.de>
Upstream-commit: c0f883fdeeb2480970fb48fbcbc2a842aa5a90e8
Component: engine
If a network is created with a name that matches another
network's ID, the network with that name was masking the
other network's ID.
As a result, it was not possible to remove the network
with a given ID.
This patch changes the order in which networks are
matched to be what we use for other cases;
1. Match on full ID
2. Match on full Name
3. Match on Partial ID
Before this patch:
$ docker network create foo
336717eac9eaa3da6557042a04efc803f7e8862ce6cf96f6b9565265ba5c618b
$ docker network create 336717eac9eaa3da6557042a04efc803f7e8862ce6cf96f6b9565265ba5c618b
4a698333f1197f20224583abce14876d7f25fdfe416a8545927006c315915a2a
$ docker network ls
NETWORK ID NAME DRIVER SCOPE
4a698333f119 336717eac9eaa3da6557042a04efc803f7e8862ce6cf96f6b9565265ba5c618b bridge local
d1e40d43a2c0 bridge bridge local
336717eac9ea foo bridge local
13cf280a1bbf host host local
d9e4c03728a0 none null local
$ docker network rm 336717eac9eaa3da6557042a04efc803f7e8862ce6cf96f6b9565265ba5c618b
4a698333f1197f20224583abce14876d7f25fdfe416a8545927006c315915a2a
$ docker network ls
NETWORK ID NAME DRIVER SCOPE
d1e40d43a2c0 bridge bridge local
336717eac9ea foo bridge local
13cf280a1bbf host host local
d9e4c03728a0 none null local
After this patch:
$ docker network create foo
2d1791a7def4e2a1ef0f6b83c6add333df0bb4ced2f196c584cb64e6bd94b835
$ docker network create 2d1791a7def4e2a1ef0f6b83c6add333df0bb4ced2f196c584cb64e6bd94b835
6cbc749a529cd2d9d3b10566c84e56c4203dd88b67417437b5fc7a6e955dd48f
$ docker network ls
NETWORK ID NAME DRIVER SCOPE
6cbc749a529c 2d1791a7def4e2a1ef0f6b83c6add333df0bb4ced2f196c584cb64e6bd94b835 bridge local
166c943dbeb5 bridge bridge local
2d1791a7def4 foo bridge local
6c45b8aa6d8e host host local
b11c96b51ea7 none null local
$ docker network rm 2d1791a7def4e2a1ef0f6b83c6add333df0bb4ced2f196c584cb64e6bd94b835
2d1791a7def4e2a1ef0f6b83c6add333df0bb4ced2f196c584cb64e6bd94b835
$ docker network ls
NETWORK ID NAME DRIVER SCOPE
6cbc749a529c 2d1791a7def4e2a1ef0f6b83c6add333df0bb4ced2f196c584cb64e6bd94b835 bridge local
166c943dbeb5 bridge bridge local
6c45b8aa6d8e host host local
b11c96b51ea7 none null local
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Upstream-commit: e52001c56e12e4fc63fb5d89ef919295d6ddd5d5
Component: engine
83c2152de503012195bd26069fd8fbd2dea4b32f sets the kernel param for
fs.may_detach_mounts, but this is not neccessary for the daemon to
operate. Instead of erroring out (and thus aborting startup) just log
the error.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Upstream-commit: c6a2044497e0e1ff61350859c8572a2c31c17ced
Component: engine
- Call the function that create an event entry while volumes are
pruning.
- Pass volume.Volume type on volumeRm instead of a name. Volume lookup is done
on the exported VolumeRm function.
- Skip volume deletion when force option used and it does not exists.
Signed-off-by: Nicolas Sterchele <sterchele.nicolas@gmail.com>
Upstream-commit: 63864ad8c17f0119a38af3cb9b1bc64a8afd0584
Component: engine
