There are currently problems with "swarm init" and "swarm join" when an
explicit --listen-addr flag is not provided. swarmkit defaults to
finding the IP address associated with the default route, and in cloud
setups this is often the wrong choice.
Introduce a notion of "advertised address", with the client flag
--advertise-addr, and the daemon flag --swarm-default-advertise-addr to
provide a default. The default listening address is now 0.0.0.0, but a
valid advertised address must be detected or specified.
If no explicit advertised address is specified, error out if there is
more than one usable candidate IP address on the system. This requires a
user to explicitly choose instead of letting swarmkit make the wrong
choice. For the purposes of this autodetection, we ignore certain
interfaces that are unlikely to be relevant (currently docker*).
The user is also required to choose a listen address on swarm init if
they specify an explicit advertise address that is a hostname or an IP
address that's not local to the system. This is a requirement for
overlay networking.
Also support specifying interface names to --listen-addr,
--advertise-addr, and the daemon flag --swarm-default-advertise-addr.
This will fail if the interface has multiple IP addresses (unless it has
a single IPv4 address and a single IPv6 address - then we resolve the
tie in favor of IPv4).
This change also exposes the node's externally-reachable address in
docker info, as requested by #24017.
Make corresponding API and CLI docs changes.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Upstream-commit: a0ccd0d42fdb0dd2005f67604cb81a5a6b26787e
Component: engine
This adds the `--live-restore` option to the documentation.
Also synched usage description in the documentation
with the actual description, and re-phrased some
flag descriptions to be a bit more consistent.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Upstream-commit: 64a8317a5a306dffd0ec080d9ec5b4ceb2479a01
Component: engine
This also moves the variable holding the default runtime name from the
engine-api repository into docker repository
Signed-off-by: Kenfe-Mickael Laventure <mickael.laventure@gmail.com>
Upstream-commit: 69af7d0d13670b8e2a03a38b4d9a849fc109b338
Component: engine
This flags enables full support of daemonless containers in docker. It
ensures that docker does not stop containers on shutdown or restore and
properly reconnects to the container when restarted.
This is not the default because of backwards compat but should be the
desired outcome for people running containers in prod.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Upstream-commit: d705dab1b1bd0a946d647374325d61fac57736db
Component: engine
This fix tries to address issues raised in #20936 and #22443
where `docker pull` or `docker push` fails because of the
concurrent connection failing.
Currently, the number of maximum concurrent connections is
controlled by `maxDownloadConcurrency` and `maxUploadConcurrency`
which are hardcoded to 3 and 5 respectively. Therefore, in
situations where network connections don't support multiple
downloads/uploads, failures may encounter for `docker push`
or `docker pull`.
This fix tries changes `maxDownloadConcurrency` and
`maxUploadConcurrency` to adjustable by passing
`--max-concurrent-uploads` and `--max-concurrent-downloads` to
`docker daemon` command.
The documentation related to docker daemon has been updated.
Additional test case have been added to cover the changes in this fix.
This fix fixes#20936. This fix fixes#22443.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Upstream-commit: 7368e41c07c21a1e2c6a49abecd1c2fc76404e49
Component: engine
2.windows can use cors, too
3.remove function setPlatformServerConfig
Signed-off-by: allencloud <allen.sun@daocloud.io>
Upstream-commit: 2feb88cbd391027fddf514496a5a825848c670ab
Component: engine
Allowing to set their values in the daemon configuration file.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Upstream-commit: 59586d02b1cc004f14cd7ff6b454211f562da326
Component: engine
When the value for a configuration option in the file is `false`,
and the default value for a flag is `true`, we should not
take the value from the later as final value for the option,
because the user explicitly set `false`.
This change overrides the default value in the flagSet with
the value in the configuration file so we get the correct
result when we merge the two configurations together.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Upstream-commit: 31cb96dcfaaebe3f807e7c7bf82a48b5995c743b
Component: engine
This adds an npipe protocol option for Windows hosts, akin to unix
sockets for Linux hosts. This should become the default transport
for Windows, but this change does not yet do that.
It also does not add support for the client side yet since that
code is in engine-api, which will have to be revendored separately.
Signed-off-by: John Starks <jostarks@microsoft.com>
Upstream-commit: 0906195fbbd6f379c163b80f23e4c5a60bcfc5f0
Component: engine
That way the configuration file becomes flag, without extra keys.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Upstream-commit: 5e80ac0dd183874ab7cd320a8bd0f0378dbd1321
Component: engine
- Return an error if any of the keys don't match valid flags.
- Fix an issue ignoring merged values as named values.
- Fix tlsverify configuration key.
- Fix bug in mflag to avoid panics when one of the flag set doesn't have any flag.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Upstream-commit: ed4038676f09d124180d634ec2cb341745f5fc79
Component: engine
- Set the daemon log level to what's set in the configuration.
- Enable TLS when TLSVerify is enabled.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Upstream-commit: cd3446972e968639684f2b65bfc11c099a25f1b0
Component: engine
Read configuration after flags making this the priority:
1- Apply configuration from file.
2- Apply configuration from flags.
Reload configuration when a signal is received, USR2 in Linux:
- Reload router if the debug configuration changes.
- Reload daemon labels.
- Reload cluster discovery.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Upstream-commit: 677a6b3506107468ed8c00331991afd9176fa0b9
Component: engine
- Make the API client library completely standalone.
- Move windows partition isolation detection to the client, so the
driver doesn't use external types.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Upstream-commit: 7ac4232e70fe7cf7318333cd0890db7f95663079
Component: engine
Each plug-in operates as a separate service, and registers with Docker
through general (plug-ins API)
[https://blog.docker.com/2015/06/extending-docker-with-plugins/]. No
Docker daemon recompilation is required in order to add / remove an
authentication plug-in. Each plug-in is notified twice for each
operation: 1) before the operation is performed and, 2) before the
response is returned to the client. The plug-ins can modify the response
that is returned to the client.
The authorization depends on the authorization effort that takes place
in parallel [https://github.com/docker/docker/issues/13697].
This is the official issue of the authorization effort:
https://github.com/docker/docker/issues/14674
(Here)[https://github.com/rhatdan/docker-rbac] you can find an open
document that discusses a default RBAC plug-in for Docker.
Signed-off-by: Liron Levin <liron@twistlock.com>
Added container create flow test and extended the verification for ps
Upstream-commit: 75c353f0ad73bd83ed18e92857dd99a103bb47e3
Component: engine
Each platform has only a driver now.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Upstream-commit: 157b66ad390902ef6f5b51b3f76d5177eacac81b
Component: engine
--cluster-advertise daemon option is enahanced to support <interface-name>
in addition to <ip-address> in order to amke it automation friendly using
docker-machine.
Signed-off-by: Madhu Venugopal <madhu@docker.com>
Upstream-commit: 3e7db73b99498d037b43eb59972a6360cfbc971b
Component: engine
Adds support for the daemon to handle user namespace maps as a
per-daemon setting.
Support for handling uid/gid mapping is added to the builder,
archive/unarchive packages and functions, all graphdrivers (except
Windows), and the test suite is updated to handle user namespace daemon
rootgraph changes.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
Upstream-commit: 442b45628ee12ebd8e8bd08497896d5fa8eec4bd
Component: engine
This leverages recent additions to libkv enabling client
authentication via TLS so the discovery back-end can be locked
down with mutual TLS. Example usage:
docker daemon [other args] \
--cluster-advertise 192.168.122.168:2376 \
--cluster-store etcd://192.168.122.168:2379 \
--cluster-store-opt kv.cacertfile=/path/to/ca.pem \
--cluster-store-opt kv.certfile=/path/to/cert.pem \
--cluster-store-opt kv.keyfile=/path/to/key.pem
Signed-off-by: Daniel Hiltgen <daniel.hiltgen@docker.com>
Upstream-commit: 124792a8714425283226c599ee69cbeac2e4d650
Component: engine
Use `pkg/discovery` to provide nodes discovery between daemon instances.
The functionality is driven by two different command-line flags: the
experimental `--cluster-store` (previously `--kv-store`) and
`--cluster-advertise`. It can be used in two ways by interested
components:
1. Externally by calling the `/info` API and examining the cluster store
field. The `pkg/discovery` package can then be used to hit the same
endpoint and watch for appearing or disappearing nodes. That is the
method that will for example be used by Swarm.
2. Internally by using the `Daemon.discoveryWatcher` instance. That is
the method that will for example be used by libnetwork.
Signed-off-by: Arnaud Porterie <arnaud.porterie@docker.com>
Upstream-commit: 7d193ef1f3b5fcd6aa55b7376116e2617be12e06
Component: engine
- some method names were changed to have a 'Locking' suffix, as the
downcased versions already existed, and the existing functions simply
had locks around the already downcased version.
- deleting unused functions
- package comment
- magic numbers replaced by golang constants
- comments all over
Signed-off-by: Morgan Bauer <mbauer@us.ibm.com>
Upstream-commit: abd72d4008dde7ee8249170d49eb4bc963c51e24
Component: engine
This patch creates a new cli package that allows to combine both client
and daemon commands (there is only one daemon command: docker daemon).
The `-d` and `--daemon` top-level flags are deprecated and a special
message is added to prompt the user to use `docker daemon`.
Providing top-level daemon-specific flags for client commands result
in an error message prompting the user to use `docker daemon`.
This patch does not break any old but correct usages.
This also makes `-d` and `--daemon` flags, as well as the `daemon`
command illegal in client-only binaries.
Signed-off-by: Tibor Vass <tibor@docker.com>
Upstream-commit: 96ce3a194aab2807fdd638825b9ea7cb9ba55c36
Component: engine
- Refactor opts.ValidatePath and add an opts.ValidateDevice
ValidePath will now accept : containerPath:mode, hostPath:containerPath:mode
and hostPath:containerPath.
ValidateDevice will have the same behavior as current.
- Refactor opts.ValidateEnv, opts.ParseEnvFile
Environment variables will now be validated with the following
definition :
> Environment variables set by the user must have a name consisting
> solely of alphabetics, numerics, and underscores - the first of
> which must not be numeric.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Upstream-commit: dfc6c04fa3f7dcb0e78e9dd5e8e4dd285b98546d
Component: engine
libnetwork host, none and bridge driver initialization is incorrectly
disabled if the daemon flag --bridge=none. The expected behavior of
setting --bridge as none is to disable the bridge driver alone and let
all other modes to be operational.
Signed-off-by: Madhu Venugopal <madhu@docker.com>
Upstream-commit: c9328c6ccf120abda297d11fcfc7e60c7c31ec21
Component: engine
- brings in vxlan based native multihost networking
- added a daemon flag required by libkv for dist kv operations
- moved the daemon flags to experimental
Signed-off-by: Madhu Venugopal <madhu@docker.com>
Upstream-commit: 508065a7adc84e5e63f47b00c379dad6a79d3c5e
Component: engine
This commit also brings in the ability to specify a default network and its
corresponding driver as daemon flags. This helps in existing clients to
make use of newer networking features provided by libnetwork.
Signed-off-by: Madhu Venugopal <madhu@docker.com>
Upstream-commit: da5a3e6dee80f1f5d4059851e4762ffb0484f7e9
Component: engine
