* fix: Helper `_replace_by_env_in_file()` support delimiter parameter
Minor change to add support for usage with `saslauthd.conf` which differs with `:` for it's key/value delimiter.
Also adopts the`_escape_for_sed()` method, instead of the inline sed pattern (_which for some reason escaped `=` but not `(` + `)`, thus buggy if ever matching on input with those tokens_).
`_escape_for_sed()` likewise wasn't escaping for `(` + `)` or even `|`, which are required for proper escape support if using `sed -E` / `sed -r` with this method. Additionally added escaping support for `&` replacement segment token, which seems valid. Increased verbosity to better grok pattern matching expression, clarified escaping concern with `sed` delimiter since the project is not consistent there.
* chore: Preserve K/V white-space of original source
No need to check for a non-empty value to prepend a space (_since an empty value is used via sed anyway?_).
Can also be a bit DRY with the sed pattern, matching the key + delimiter (_and all white-space before/after the delimiter until the value_), then capture that for the replacement left-side value while only actually swapping the value for the ENV input value.
Should be an improvement, unless there is a scenario that would differ between `` and ` ` as valid value assignments?
* chore: Adopt `sedfile` + case-insensitive pattern matching
Both should be improvements for usage
Co-authored-by: Casper <casperklein@users.noreply.github.com>
* fix: Harden `_replace_by_env_in_file()` and update tests
- Split each ENV line at the first `=` only, `IFS='=' read` dropped a trailing `=` from values (e.g. base64 padded passwords).
- Use `/` as the `sed` delimiter, as it is the only delimiter escaped by `_escape_for_sed()` (values with `#` broke the expression).
- Revert `sedfile` to `sed -i`: most prefixed ENV have no matching key, so an unchanged file is expected and `sedfile` would log spurious errors.
- Drop the unused key/value delimiter parameter.
- Avoid trailing white-space when the value is empty.
- Tests: Expect the retained white-space, add edge-cases for `sed` tokens and a trailing `=`, compare LDAP settings white-space insensitive.
Signed-off-by: Georg Lauterbach <44545919+georglauterbach@users.noreply.github.com>
---------
Signed-off-by: Georg Lauterbach <44545919+georglauterbach@users.noreply.github.com>
Co-authored-by: Casper <casperklein@users.noreply.github.com>
Co-authored-by: Georg Lauterbach <44545919+georglauterbach@users.noreply.github.com>
Refactoring this `setup` CLI command as part of the effort to unify our DKIM feature support between OpenDKIM + Rspamd:
- Adds a `main()` method similar to other setup CLI commands.
- Help text more aligned with equivalent rspamd DKIM setup CLI command.
- DRY some repetition such as hard-coded paths to use variables.
- OpenDKIM config files are created / initialized early on now with `_create_opendkim_configs()`. `while` loop only needs to append entries, so is easier to grok.
- `_create_dkim_key()` to scope just the logic (_and additional notes_) to key generation via `opendkim-genkey`
- Now overall logic with the `while` loop of the script occurs in `_generate_dkim_keys()`:
- Ownership fixes are now applied after the `while` loop as that seems more appropriate than per iteration.
- Temporary VHOST config is now removed since it's no longer useful after running.
- Tests adjusted for one new log for adding of default trusted hosts content.
Overall this should be nicer to grok/maintain. Some of this logic will be reused for the unified DKIM generation command in future, which is more likely to shift towards all domains using the same keypair by default with rspamd/opendkim config generated at runtime rather than reliant upon DMS config volume to provide that (_still expected for private key_).
---------
Co-authored-by: Casper <casperklein@users.noreply.github.com>
Co-authored-by: Georg Lauterbach <44545919+georglauterbach@users.noreply.github.com>
* chore: Detect missing final newline in configs read
These lines will be not be processed by `read`, emit a warning to raise awareness.
* fix: Ensure parsed config has final newline appended (when possible)
This functionality was handled in `accounts.sh` via a similar sed command (that the linked references also offer).
`printf` is better for this, no shellcheck comment required either.
We additionally don't attempt to modify files that are read-only.
* fix: Ensure parsed configs have CRLF to LF corrected (where possible)
Likewise, this runtime fix was only covering two config files. It now applies to all callers of this method.
* fix: Sanitize `postfix-master.cf` via helper
This feature should have been using the helper to avoid user error from their config updates accidentally introducing subtle breakage implicitly (due to CRLF or missing final newline).
* tests: Add test cases for new helpers
* tests: `rm` is redundant when using `BATS_TEST_TMPDIR`
This temporary directory is created and removed implicitly. Even after a test failure.
* chore: Remove old `postfix-virtual.cf` migration logic
This was introduced in 2018, there should be no one needing to rely on this anymore?
* tests: Remove comment on sed failure concern
* chore: Add entry to `CHANGELOG.md`
* Apply suggestions from code review
Co-authored-by: Georg Lauterbach <44545919+georglauterbach@users.noreply.github.com>
---------
Co-authored-by: Georg Lauterbach <44545919+georglauterbach@users.noreply.github.com>
Some deployment scenarios are not compatible with `5000:5000` static vmail user with `/var/mail`. This feature allows adjusting the defaults to a UID / GID that is compatible.
Signed-off-by: vincent <vincent@ducamps.win>
Co-authored-by: Brennan Kinney <5098581+polarathene@users.noreply.github.com>
The new function can
1. update/append
2. update/prepend
3. initialize if non-existent
options in `/etc/postfix/main.cf` in a safe and secure manner. When the
container is improperly restarted, the option is not applied twice.
---
Co-authored-by: Casper <casperklein@users.noreply.github.com>
Co-authored-by: Brennan Kinney <5098581+polarathene@users.noreply.github.com>
For an upcoming PR, these changes are required, because the script that
is using the helpers uses `set -eE`. This leads to situations where
errors are not properly handled in our helpers (yet; I plan on changing
that in the future).
* added checks whether OpenDKIM/OpenDMARC/policyd-spf are enabled
* added functions to check if VAR is 0/0 or an int
and also added tests.
I also adjusted the test file to not run in a container, because there
is no need. This also decreases test time, which, in turn, increases
maintainers' happiness.
* added more checks to Rspamd setup
I added the helpers from the previous commit to the Rspamd setup to make
the whole setup more robust, and indicate to the user that an ENV
variable's value is incorrect.
While we did not issues for this in the past, I believe it to be
worthwhile for the future.
* added canonical directory for users to place files in
This dir is canonical with DMS's optional configuration dirs, as it
lives in well-known volume mounts. Hence, users will not need to adjust
`/etc/rspamd/override.d` manually anymore, or mount a volume to this
place.
The docs explain this now, but the DKIM page needs a slight update on
this too I guess. I will follow-up here.
* misc minor improvements
* use variables for common directories
* fix: Workaround `postconf` write settle logic
After updating `main.cf`, to avoid an enforced delay from reading the config by postfix tools, we can ensure the modified time is at least 2 seconds in the past as a workaround. This should be ok with our usage AFAIK.
Shaves off 2+ seconds roughly off each container startup, reduces roughly 2+ minutes off tests.
* chore: Only modify `mtime` if less than 2 seconds ago
- Slight improvement by avoiding unnecessary writes with a conditional check on the util method.
- Can more comfortably call this during `postfix reload` in the change detection cycle now.
- Identified other tests that'd benefit from this, created a helper method to call instead of copy/paste.
- The `setup email restrict` command also did a modification and reload. Added util method here too.
* tests(fix): `mail_smtponly.bats` should wait for Postfix
- `postfix reload` fails if the service is not ready yet.
- `service postfix reload` and `/etc/init.d/postfix reload` presumably wait until it is ready? (as these work regardless)
* chore: Review feedback - Move reload method into utilities
* chore(`aliases.sh`): Filepath to local var `DATABASE_VIRTUAL`
* chore(`accounts.sh`): Filepath to local var `DATABASE_ACCOUNTS`
* chore(`accounts.sh`): Filepath to local var `DATABASE_VIRTUAL`
* chore(`accounts.sh`): Filepath to local var `DATABASE_DOVECOT_MASTERS`
* chore(`bin/open-dkim`): Filepaths to local vars (accounts,virtual,vhost)
* chore(`relay.sh`): Filepath to local var `DATABASE_SASL_PASSWD`
* chore: Rename method
Prior PR feedback suggested a better helper method name.
* chore: Normalize filtering config lines as input for iterating
* chore: Remove `_is_comment` helper method
No longer serving a purpose with more appropriate filter method for pre-processing the entire config file.
* fix(listmailuser): Don't parse comments
Avoids passing comments to `dovecot_quota_to_hr()` which fails to handle it and would throws errors.
* chore: Move config filter method to `helpers/utils.sh`
This PR does two small things:
1. The log level, in case it is unset, will now be "calculated" from
`/etc/dms-settings` and not always default to `info`. This way, we
can ensure that more often than not, the log level the user chose
when starting DMS is used everywhere.
2. I noticed that the way I obtained the log level could be used to
obtain any env variable's log level. I therefore added a function to
`utils.sh` in case we use it in the future.