Summary:
Addresses https://github.com/facebook/rocksdb/issues/13587.
This PR exposes the optimized implementation of batched reads through a `Transaction` object to Java clients.
The latency improvement of transactional multiget on production workload achieved by switching the implementation is roughly:
```
quantile=0.2: 21%
quantile=0.5: 28%
quantile=0.8: 46%
quantile=1.0: 239%
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/13589
Reviewed By: jaykorean
Differential Revision: D74660169
Pulled By: cbi42
fbshipit-source-id: d01780173e0500c96e5e431ff6645008cbf6e8b5
Summary:
**Context/Summary:**
This PR adds new stats to measure compaction readahead size for rocksdb managed prefetching (not FS prefetching). It can be used to verify compaction read-ahead is doing what's configured. This PR also excludes compaction readahead stats from user scan readahead stats measured in existing stats so there is a cleaner separating between these two.
Bonus: this PR also included some typo fixing about "io activities"
Pull Request resolved: https://github.com/facebook/rocksdb/pull/13520
Test Plan: Modified existing test to verify stats
Reviewed By: archang19
Differential Revision: D72892850
Pulled By: hx235
fbshipit-source-id: 1a73182061baa044c9c9193a2b0fd967ffe75c4a
Summary:
As titled. This option has been marked deprecated since introduction of a better option `max_write_buffer_size_to_maintain` and acts as its fallback since RocksDB 6.5.0 The internal user we know these options were created for migrated to `max_write_buffer_size_to_maintain` for a long time too.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/13491
Test Plan: existing tests
Reviewed By: cbi42
Differential Revision: D71984601
Pulled By: jowlyzhang
fbshipit-source-id: c264d4809e311f60fdbad817ebfade256db549b6
Summary:
**Context/Summary:**
MaxMemCompactionLevel() developed 10 years ago simply returns the level a memtable flushed to, which has historically been L0 and have no plan to change to something different for future. It is also not used in test or internally.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/13503
Test Plan: CI + fake release
Reviewed By: cbi42
Differential Revision: D72066092
Pulled By: hx235
fbshipit-source-id: 5ff5b16a6664ef3efabd3a6fbd8a2d0529b62460
Summary:
based on the option comment, `ignore_range_deletions` was added due to the overhead of range deletions in read path when a DB does not use DeleteRange(). The current implementation should not have a noticeable performance difference in this case.
`experimental::PromoteL0()` can be replaced by doing a manual compaction with proper CompactRangeOptions.
There are some internal use of these option and API so we will remove them later after the usages are updated.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/13500
Test Plan:
comment change only.
Performance: benchmark the performance difference with `ignore_range_deletions` and without (borrowed flag `universal_incremental` for this purpose), ran at the same time on the same machine.
- random point get:
- ignore_range_deletions=false: 343078 ops/sec
- ignore_range_deletions=true: 340219 ops/sec (0.8% slower)
```
(for I in $(seq 1 1); do TEST_TMPDIR=/dev/shm/t1 /data/users/changyubi/vscode-root/rocksdb/db_bench --benchmarks=fillseq,waitforcompaction,readrandom --write_buffer_size=67108864 --writes=1000000 --num=2000000 --reads=1000000 --seed=1723056275 --universal_incremental=false 2>&1 | grep "readrandom"; done;) | awk '{ t += $5; c++; print } END { print 1.0 * t / c }';
```
- sequential scan:
- ignore_range_deletions=false: 5378104 ops/sec
- ignore_range_deletions=true: 5393809 ops/sec (0.3% faster)
```
(for I in $(seq 1 10); do TEST_TMPDIR=/dev/shm/t1 /data/users/changyubi/vscode-root/rocksdb/db_bench --benchmarks=fillseq,waitforcompaction,readseq[-X10] --write_buffer_size=67108864 --writes=1000000 --num=2000000 --universal_incremental=true --seed=1723056275 2>1 | grep "\[AVG 10 runs\]"; done;) | awk '{ t += $6; c++; print; } END { printf "%.0f\n", 1.0 * t / c }';
```
The difference in ops/sec for the two benchmarks is likely noise.
Reviewed By: hx235
Differential Revision: D72069223
Pulled By: cbi42
fbshipit-source-id: ad82a051aa4682790d2178cd4fb2d1467397fbb5
Summary:
Cleanup post https://github.com/facebook/rocksdb/pull/13284.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/13322
Test Plan:
1. We did not find any evidence of breakage in internal pre-release integration pipeline runs after renaming the deprecated API in `9.10`.
2. _To the extent possible_, we manually validated partner use cases of file deletion and confirmed deprecated API is no longer in use.
Reviewed By: jaykorean
Differential Revision: D68476852
Pulled By: mszeszko-meta
fbshipit-source-id: fbe1f873e16ae7c60d7706a3c44ecc695ab86a4b
Summary:
FlushReason enum in C++ has members up to 15, but in Java, the mirroring FlushReason only supports reason codes up to 12. This causes exceptions when adding a flush listener.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/13246
Reviewed By: pdillinger
Differential Revision: D68241620
Pulled By: jaykorean
fbshipit-source-id: 1e2856dad28dff0cbb1772f5a8ea03cc1e224088
Summary:
We added a removal warning for public `DB::DeleteFile` API ~4 years ago in https://github.com/facebook/rocksdb/pull/7337. This API seems to sit at wrong layer of abstraction, where instead of exposing a clear interface to delete specific range of keys, callers rely on their own discovery / interpretation of where their data / log possibly resides 'as-of-now'. For example, in case of data, the physical location of the keys might very well change after user obtained their mapping from key(s) to specific SST file. This will lead to `InvalidArgument` response, which if repeated, would put a user in a race condition spinning wheel - the behavior that's inefficient, fairly indeterministic and therefore one that should be strongly discouraged. We're employing a graceful approach to prefixing the public API with `DEPRECATED_` first for better discoverability and ease of self service for product teams should they still use that legacy API. If everything goes smoothly, we intend to remove all the deprecated API references in the next release.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/13284
Reviewed By: pdillinger
Differential Revision: D67981502
Pulled By: mszeszko-meta
fbshipit-source-id: adc7fe5cf4e2180bcfd21878b8f78f3fb6ead355
Summary:
This option has been officially deprecated in 5.4.0. We're removing all the references to `random_access_max_buffer_size`, related rules and all the clients wrappers. As a part of this refactoring, we're also getting rid of the `options-1-false` (and consequently its' `multiple-conds-all-false` corresponding rule), as condition would not make much sense anymore without the bounding RA max buffer size limit. Motivated by ongoing tech debt reduction effort.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/13278
Test Plan: Validated that internal users do not rely on this long-gone option in their workflows.
Reviewed By: jaykorean
Differential Revision: D67909674
Pulled By: mszeszko-meta
fbshipit-source-id: 8f4b59a4a92b0b32b8b91b71ac318aafc17f1da2
Summary:
Reflect RocksDB DailyOffpeakTimeUTC option in Java API. As is standard for options, there are a number of different places where this option needs to be added: it is an option, a DB option, and it is mutable (can be changed while running).
The new option is a string value. This requires an extension to the internal MutableDBOptions parse code, which received the entire options string from C++ and parses it on the Java side.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/13148
Reviewed By: cbi42
Differential Revision: D67870402
Pulled By: jaykorean
fbshipit-source-id: 975af69773206da936d230cbadb5f69a002d92a3
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/13022
Currently, `blob_garbage_collection_force_threshold` applies to the oldest batch of blob files, which is typically only a small subset of the blob files currently eligible for garbage collection. This can result in a form of head-of-line blocking: no GC-triggered compactions will be scheduled if the oldest batch does not currently exceed the threshold, even if a lot of higher-numbered blob files do. This can in turn lead to high space amplification that exceeds the soft bound implicit in the force threshold (e.g. 50% would suggest a space amp of <2 and 75% would imply a space amp of <4). The patch changes the semantics of this configuration threshold to apply to the entire set of blob files that are eligible for garbage collection based on `blob_garbage_collection_age_cutoff`. This provides more intuitive semantics for the option and can provide a better write amp/space amp trade-off. (Note that GC-triggered compactions still pick the same SST files as before, so triggered GC still targets the oldest the blob files.)
Reviewed By: jowlyzhang
Differential Revision: D62977860
fbshipit-source-id: a999f31fe9cdda313de513f0e7a6fc707424d4a3
Summary:
* Set write_dbid_to_manifest=true by default
* Add new option write_identity_file (default true) that allows us to opt-in to future behavior without identity file
* Refactor related DB open code to minimize code duplication
_Recommend hiding whitespace changes for review_
Intended follow-up: add support to ldb for reading and even replacing the DB identity in the manifest. Could be a variant of `update_manifest` command or based on it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/13019
Test Plan: unit tests and stress test updated for new functionality
Reviewed By: anand1976
Differential Revision: D62898229
Pulled By: pdillinger
fbshipit-source-id: c08b25cf790610b034e51a9de0dc78b921abbcf0
Summary:
Add a couple of ticker stats for corruption retry count and successful retries. This PR also eliminates an extra read attempt when there's a checksum mismatch in a block read from the prefetch buffer.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12923
Test Plan: Update existing tests
Reviewed By: jowlyzhang
Differential Revision: D61024687
Pulled By: anand1976
fbshipit-source-id: 3a08403580ab244000e0d480b7ee0f5a03d76b06
Summary:
The default value for `refillPeriodMicros` is `100 * 1000`, which means 100ms (or 100,000us).
The document comments say 100,000ms (equivalent to 100 seconds), which is incorrect and misleading. This PR fixes this typo.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12832
Reviewed By: cbi42
Differential Revision: D59492336
Pulled By: ajkr
fbshipit-source-id: c2f55a8b996fe078a1510fcbebaea92ec0075929
Summary:
This feature has been around for a couple of years and users haven't reported any problems with it.
Not quite related: fixed a technical ODR violation in public header for info_log_level in case DEBUG build status changes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12377
Test Plan: unit tests updated, already in crash test. Some unit tests are expecting specific behaviors of optimize_filters_for_memory=false and we now need to bake that in.
Reviewed By: jowlyzhang
Differential Revision: D54129517
Pulled By: pdillinger
fbshipit-source-id: a64b614840eadd18b892624187b3e122bab6719c
Summary:
I had a TODO to complete `CompactionOptions`'s compression API but never did it: d610e14f93/db/compaction/compaction_picker.cc (L371-L373)
Without solving that TODO, the API remains incomplete and unsafe. Now, however, I don't think it's worthwhile to complete it. I think we should instead delete the API entirely. This PR deprecates it in preparation for deletion in a future major release. The `ColumnFamilyOptions` settings for compression should be good enough for `CompactFiles()` since they are apparently good enough for every other compaction, including `CompactRange()`.
In the meantime, I also changed the default `CompressionType`. Having callers of `CompactFiles()` use Snappy compression by default does not make sense when the default could be to simply use the same compression type that is used for every other compaction. As a bonus, this change makes the default `CompressionType` consistent with the `CompressionOptions` that will be used.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12587
Reviewed By: hx235
Differential Revision: D56619273
Pulled By: ajkr
fbshipit-source-id: 1477de49f14b06c72d6f0045616a8ce91d97e66e
Summary:
https://github.com/facebook/rocksdb/issues/12466 reported a bug when `RocksDB.getColumnFamilyMetaData()` is called on an existing database(With files stored on disk). As neilramaswamy mentioned, this was caused by https://github.com/facebook/rocksdb/issues/11770 where the signature of `SstFileMetaData` constructor was changed, but JNI code wasn't updated.
This PR fix JNI code, and also properly populate `fileChecksum` on `SstFileMetaData`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12474
Reviewed By: jowlyzhang
Differential Revision: D55811808
Pulled By: ajkr
fbshipit-source-id: 2ab156f41eaf4a4f30c49e6df421b61e8451230e
Summary:
On file systems that support storage level data checksum and reconstruction, retry SST block reads for point lookups, scans, and flush and compaction if there's a checksum mismatch on the initial read. A file system can indicate its support by setting the `FSSupportedOps::kVerifyAndReconstructRead` bit in `SupportedOps`.
Tests:
Add new unit tests
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12427
Reviewed By: ajkr
Differential Revision: D55025941
Pulled By: anand1976
fbshipit-source-id: dbd990cb75e03f756c8a66d42956f645c0b6d55e
Summary:
The most general `open()` method for each of RocksDB, TtlDB, OptimisticTransactionDB and TransactionDB should
- ensure the default CF is supplied in the list of descriptors
- cache the default CF handle
- store open CF handles for automatic close on DB close
The `close()` method in each of these DB subclasses should `close()` all the owned CF handles.
I can’t find a cleaner way to build some generalised open/close that does this for all DB subclasses, so it exists as cut and paste with variations in the 4 different DB subclasses.
Added some slightly paranoid testing that CF handles explicitly referred to as default in a list of CF handles in the general open methods, and the simple open that doesn’t supply a CF, end up reading and writing to the same CF. Prompted by the fact that this code is a bit opaque; the first returned handle is the DB.
As part of this, fix the bug where the Java side of `OptimisticsTransactionDB` was not setting up default column family; this was visible when setting up an iterator; add a test to validate that the iterator is OK. A single Java reference to the default column family was not being created in the OptimisticsTransactionDB RocksDB subclass; it should be created in all subclasses. The same problem had previously been fixed for TtlDB.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12417
Reviewed By: ajkr
Differential Revision: D54807643
Pulled By: pdillinger
fbshipit-source-id: 66f34e56a822a009a8f2018d401cf8940d91aa35
Summary:
This option is used for encoding keys in block based table files. It has been having a default true value since its introduction.
Users may not notice this option is not persisted in options file unless they are explicitly setting it to false. If the users expect `Iterator::GetProperty("rocksdb.iterator.is-key-pinned")` to return 1 when setting `ReadOptions.pin_data = true`, they should have noticed loading options file won't work and have work around for this by always explicitly set this option to false for opening DB. This change won't impact those users except that now they can remove their work around. If the users are not relying on key pinning behavior at all and as a result didn't notice the option is not persisted, this change shouldn't have any visible behavior impact either.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11987
Reviewed By: hx235
Differential Revision: D54093238
Pulled By: jowlyzhang
fbshipit-source-id: 256a3348c44cf91349034d1f6e242c437b32b9a5
Summary:
In RocksDb jni threre is no method to know if the instance is closed or not.
so when using a closed instance it makes jvm crash.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11337
Reviewed By: jaykorean
Differential Revision: D53941387
Pulled By: ajkr
fbshipit-source-id: e3e4e6fe48409fa70a312810e467ec0c4ce356ef
Summary:
A lot of variants of Get and MultiGet have been added to `include/rocksdb/db.h` over the years. Try to consolidate them by marking variants that don't return timestamps as deprecated. The underlying DB implementation will check and return Status::NotSupported() if it doesn't support returning timestamps and the caller asks for it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12327
Reviewed By: pdillinger
Differential Revision: D53828151
Pulled By: anand1976
fbshipit-source-id: e0b5ca42d32daa2739d5f439a729815a2d4ff050
Summary:
The RocksDB ticker and histogram statistics were out of sync between the C++ and Java code, with a number of newer stats missing in TickerType.java and HistogramType.java. Also, there were gaps in numbering in portal.h, which could soon become an issue due to the number of tickers and the fact that we're limited to 1 byte in Java. This PR adds the missing stats, and re-numbers all of them. It also moves some stats around to try to group related stats together. Since this will go into a major release, compatibility shouldn't be an issue.
This should be automated at some point, since the current process is somewhat error prone.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12355
Reviewed By: jaykorean
Differential Revision: D53825324
Pulled By: anand1976
fbshipit-source-id: 298c180872f4b9f1ee54b8bb22f4e280458e7e09
Summary:
It's in production for a large storage service, and it was initially released 6 months ago (8.6.0). IMHO that's enough room for "easy downgrade" to most any user's previously integrated version, even if they only update a few times a year.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12352
Test Plan:
tests updated, including format capatibility test
table_test: ApproximateOffsetOfCompressed is affected because adding index block to metaindex adds about 13 bytes
to SST files in format_version 6. This test has historically been problematic and one reason is that, apparently, not only
could it pass/fail depending on snappy compression version, but also how long your host name is, because of db_host_id.
I've cleared that out for the test, which takes care of format_version=6 and hopefully improves long-term reliability.
Suggested follow-up: FinishImpl in table_test.cc takes a table_options that is ignored in some cases and might not match
the ioptions.table_factory configuration unless the caller is very careful. This should be cleaned up somehow.
Reviewed By: anand1976
Differential Revision: D53786884
Pulled By: pdillinger
fbshipit-source-id: 1964cbd40d3ab0a821fdc01c458031df716fcf51
Summary:
There is no strong reason for user to need this mode while on the other hand, its behavior is destructive.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12337
Reviewed By: hx235
Differential Revision: D53630393
Pulled By: jowlyzhang
fbshipit-source-id: ce94b537258102cd98f89aa4090025663664dd78
Summary:
When is RocksDB is opened with Column Family descriptors, the default column family must be set properly. If it was not, then the flush operation will fail.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12167
Reviewed By: ajkr
Differential Revision: D53104007
Pulled By: cbi42
fbshipit-source-id: dffa8e34a4b2a438553ee4ea308f3fa2e22e46f7
Summary:
## Overview
In this PR, we introduce support for setting the RocksDB native logger through Java. As mentioned in the discussion on the [Google Group discussion](https://groups.google.com/g/rocksdb/c/xYmbEs4sqRM/m/e73E4whJAQAJ), this work is primarily motivated by the JDK 17 [performance regression in JNI thread attach/detach calls](https://bugs.openjdk.org/browse/JDK-8314859): the only existing RocksJava logging configuration call, `setLogger`, invokes the provided logger over the JNI.
## Changes
Specifically, these changes add support for the `devnull` and `stderr` native loggers. For the `stderr` logger, we add the ability to prefix every log with a `logPrefix`, so that it becomes possible know which database a particular log is coming from (if multiple databases are in use). The API looks like the following:
```java
Options opts = new Options();
NativeLogger stderrNativeLogger = NativeLogger.newStderrLogger(
InfoLogLevel.DEBUG_LEVEL, "[my prefix here]");
options.setLogger(stderrNativeLogger);
try (final RocksDB db = RocksDB.open(options, ...)) {...}
// Cleanup
stderrNativeLogger.close()
opts.close();
```
Note that the API to set the logger is the same, via `Options::setLogger` (or `DBOptions::setLogger`). However, it will set the RocksDB logger to be native when the provided logger is an instance of `NativeLogger`.
## Testing
Two tests have been added in `NativeLoggerTest.java`. The first test creates both the `devnull` and `stderr` loggers, and sets them on the associated `Options`. However, to avoid polluting the testing output with logs from `stderr`, only the `devnull` logger is actually used in the test. The second test does the same logic, but for `DBOptions`.
It is possible to manually verify the `stderr` logger by modifying the tests slightly, and observing that the console indeed gets cluttered with logs from `stderr`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12213
Reviewed By: cbi42
Differential Revision: D52772306
Pulled By: ajkr
fbshipit-source-id: 4026895f78f9cc250daf6bfa57427957e2d8b053
Summary:
## Context/Summary
Similar to https://github.com/facebook/rocksdb/pull/11288, https://github.com/facebook/rocksdb/pull/11444, categorizing SST/blob file write according to different io activities allows more insight into the activity.
For that, this PR does the following:
- Tag different write IOs by passing down and converting WriteOptions to IOOptions
- Add new SST_WRITE_MICROS histogram in WritableFileWriter::Append() and breakdown FILE_WRITE_{FLUSH|COMPACTION|DB_OPEN}_MICROS
Some related code refactory to make implementation cleaner:
- Blob stats
- Replace high-level write measurement with low-level WritableFileWriter::Append() measurement for BLOB_DB_BLOB_FILE_WRITE_MICROS. This is to make FILE_WRITE_{FLUSH|COMPACTION|DB_OPEN}_MICROS include blob file. As a consequence, this introduces some behavioral changes on it, see HISTORY and db bench test plan below for more info.
- Fix bugs where BLOB_DB_BLOB_FILE_SYNCED/BLOB_DB_BLOB_FILE_BYTES_WRITTEN include file failed to sync and bytes failed to write.
- Refactor WriteOptions constructor for easier construction with io_activity and rate_limiter_priority
- Refactor DBImpl::~DBImpl()/BlobDBImpl::Close() to bypass thread op verification
- Build table
- TableBuilderOptions now includes Read/WriteOpitons so BuildTable() do not need to take these two variables
- Replace the io_priority passed into BuildTable() with TableBuilderOptions::WriteOpitons::rate_limiter_priority. Similar for BlobFileBuilder.
This parameter is used for dynamically changing file io priority for flush, see https://github.com/facebook/rocksdb/pull/9988?fbclid=IwAR1DtKel6c-bRJAdesGo0jsbztRtciByNlvokbxkV6h_L-AE9MACzqRTT5s for more
- Update ThreadStatus::FLUSH_BYTES_WRITTEN to use io_activity to track flush IO in flush job and db open instead of io_priority
## Test
### db bench
Flush
```
./db_bench --statistics=1 --benchmarks=fillseq --num=100000 --write_buffer_size=100
rocksdb.sst.write.micros P50 : 1.830863 P95 : 4.094720 P99 : 6.578947 P100 : 26.000000 COUNT : 7875 SUM : 20377
rocksdb.file.write.flush.micros P50 : 1.830863 P95 : 4.094720 P99 : 6.578947 P100 : 26.000000 COUNT : 7875 SUM : 20377
rocksdb.file.write.compaction.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0
rocksdb.file.write.db.open.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0
```
compaction, db oopen
```
Setup: ./db_bench --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench
Run:./db_bench --statistics=1 --benchmarks=compact --db=../db_bench --use_existing_db=1
rocksdb.sst.write.micros P50 : 2.675325 P95 : 9.578788 P99 : 18.780000 P100 : 314.000000 COUNT : 638 SUM : 3279
rocksdb.file.write.flush.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0
rocksdb.file.write.compaction.micros P50 : 2.757353 P95 : 9.610687 P99 : 19.316667 P100 : 314.000000 COUNT : 615 SUM : 3213
rocksdb.file.write.db.open.micros P50 : 2.055556 P95 : 3.925000 P99 : 9.000000 P100 : 9.000000 COUNT : 23 SUM : 66
```
blob stats - just to make sure they aren't broken by this PR
```
Integrated Blob DB
Setup: ./db_bench --enable_blob_files=1 --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench
Run:./db_bench --enable_blob_files=1 --statistics=1 --benchmarks=compact --db=../db_bench --use_existing_db=1
pre-PR:
rocksdb.blobdb.blob.file.write.micros P50 : 7.298246 P95 : 9.771930 P99 : 9.991813 P100 : 16.000000 COUNT : 235 SUM : 1600
rocksdb.blobdb.blob.file.synced COUNT : 1
rocksdb.blobdb.blob.file.bytes.written COUNT : 34842
post-PR:
rocksdb.blobdb.blob.file.write.micros P50 : 2.000000 P95 : 2.829360 P99 : 2.993779 P100 : 9.000000 COUNT : 707 SUM : 1614
- COUNT is higher and values are smaller as it includes header and footer write
- COUNT is 3X higher due to each Append() count as one post-PR, while in pre-PR, 3 Append()s counts as one. See https://github.com/facebook/rocksdb/pull/11910/files#diff-32b811c0a1c000768cfb2532052b44dc0b3bf82253f3eab078e15ff201a0dabfL157-L164
rocksdb.blobdb.blob.file.synced COUNT : 1 (stay the same)
rocksdb.blobdb.blob.file.bytes.written COUNT : 34842 (stay the same)
```
```
Stacked Blob DB
Run: ./db_bench --use_blob_db=1 --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench
pre-PR:
rocksdb.blobdb.blob.file.write.micros P50 : 12.808042 P95 : 19.674497 P99 : 28.539683 P100 : 51.000000 COUNT : 10000 SUM : 140876
rocksdb.blobdb.blob.file.synced COUNT : 8
rocksdb.blobdb.blob.file.bytes.written COUNT : 1043445
post-PR:
rocksdb.blobdb.blob.file.write.micros P50 : 1.657370 P95 : 2.952175 P99 : 3.877519 P100 : 24.000000 COUNT : 30001 SUM : 67924
- COUNT is higher and values are smaller as it includes header and footer write
- COUNT is 3X higher due to each Append() count as one post-PR, while in pre-PR, 3 Append()s counts as one. See https://github.com/facebook/rocksdb/pull/11910/files#diff-32b811c0a1c000768cfb2532052b44dc0b3bf82253f3eab078e15ff201a0dabfL157-L164
rocksdb.blobdb.blob.file.synced COUNT : 8 (stay the same)
rocksdb.blobdb.blob.file.bytes.written COUNT : 1043445 (stay the same)
```
### Rehearsal CI stress test
Trigger 3 full runs of all our CI stress tests
### Performance
Flush
```
TEST_TMPDIR=/dev/shm ./db_basic_bench_pre_pr --benchmark_filter=ManualFlush/key_num:524288/per_key_size:256 --benchmark_repetitions=1000
-- default: 1 thread is used to run benchmark; enable_statistics = true
Pre-pr: avg 507515519.3 ns
497686074,499444327,500862543,501389862,502994471,503744435,504142123,504224056,505724198,506610393,506837742,506955122,507695561,507929036,508307733,508312691,508999120,509963561,510142147,510698091,510743096,510769317,510957074,511053311,511371367,511409911,511432960,511642385,511691964,511730908,
Post-pr: avg 511971266.5 ns, regressed 0.88%
502744835,506502498,507735420,507929724,508313335,509548582,509994942,510107257,510715603,511046955,511352639,511458478,512117521,512317380,512766303,512972652,513059586,513804934,513808980,514059409,514187369,514389494,514447762,514616464,514622882,514641763,514666265,514716377,514990179,515502408,
```
Compaction
```
TEST_TMPDIR=/dev/shm ./db_basic_bench_{pre|post}_pr --benchmark_filter=ManualCompaction/comp_style:0/max_data:134217728/per_key_size:256/enable_statistics:1 --benchmark_repetitions=1000
-- default: 1 thread is used to run benchmark
Pre-pr: avg 495346098.30 ns
492118301,493203526,494201411,494336607,495269217,495404950,496402598,497012157,497358370,498153846
Post-pr: avg 504528077.20, regressed 1.85%. "ManualCompaction" include flush so the isolated regression for compaction should be around 1.85-0.88 = 0.97%
502465338,502485945,502541789,502909283,503438601,504143885,506113087,506629423,507160414,507393007
```
Put with WAL (in case passing WriteOptions slows down this path even without collecting SST write stats)
```
TEST_TMPDIR=/dev/shm ./db_basic_bench_pre_pr --benchmark_filter=DBPut/comp_style:0/max_data:107374182400/per_key_size:256/enable_statistics:1/wal:1 --benchmark_repetitions=1000
-- default: 1 thread is used to run benchmark
Pre-pr: avg 3848.10 ns
3814,3838,3839,3848,3854,3854,3854,3860,3860,3860
Post-pr: avg 3874.20 ns, regressed 0.68%
3863,3867,3871,3874,3875,3877,3877,3877,3880,3881
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11910
Reviewed By: ajkr
Differential Revision: D49788060
Pulled By: hx235
fbshipit-source-id: 79e73699cda5be3b66461687e5147c2484fc5eff
Summary:
**Description**
This PR passes along the native `LiveFileMetaData#file_checksum` field from the C++ class to the Java API as a copied byte array. If there is no file checksum generator factory set beforehand, then the array will empty. Please advise if you'd rather it be null - an empty array means one extra allocation, but it avoids possible null pointer exceptions.
> **Note**
> This functionality complements but does not supersede https://github.com/facebook/rocksdb/issues/11736
It's outside the scope here to add support for Java based `FileChecksumGenFactory` implementations. As a workaround, users can already use the built-in one by creating their initial `DBOptions` via properties:
```java
final Properties props = new Properties();
props.put("file_checksum_gen_factory", "FileChecksumGenCrc32cFactory");
try (final DBOptions dbOptions = DBOptions.getDBOptionsFromProps(props);
final ColumnFamilyOptions cfOptions = new ColumnFamilyOptions();
final Options options = new Options(dbOptions, cfOptions).setCreateIfMissing(true)) {
// do stuff
}
```
I wanted to add a better test, but unfortunately there's no available CRC32C implementation available in Java 8 without adding a dependency or adding a JNI helper for RocksDB's own implementation (or bumping the minimum version for tests to Java 9). That said, I understand the test is rather poor, so happy to change it to whatever you'd like.
**Context**
To give some context, we replicate RocksDB checkpoints to other nodes. Part of this is verifying the integrity of each file during replication. With a large enough RocksDB, computing the checksum ourselves is prohibitively expensive. Since SST files comprise the bulk of the data, we'd much rather delegate this to RocksDB on file write, and read it back after to compare.
It's likely we will provide a follow up to read the file checksum list directly from the manifest without having to open the DB, but this was the easiest first step to get it working for us.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11770
Reviewed By: hx235
Differential Revision: D52420729
Pulled By: ajkr
fbshipit-source-id: a873de35a48aaf315e125733091cd221a97b9073
Summary:
### Implement new Java API get()/put()/merge() methods, and transactional variants.
The Java API methods are very inconsistent in terms of how they pass parameters (byte[], ByteBuffer), and what variants and defaulted parameters they support. We try to bring some consistency to this.
* All APIs should support calls with ByteBuffer parameters.
* Similar methods (RocksDB.get() vs Transaction.get()) should support as similar as possible sets of parameters for predictability.
* get()-like methods should provide variants where the caller supplies the target buffer, for the sake of efficiency. Allocation costs in Java can be significant when large buffers are repeatedly allocated and freed.
### API Additions
1. RockDB.get implement indirect ByteBuffers. Added indirect ByteBuffers and supporting native methods for get().
2. RocksDB.Iterator implement missing (byte[], offset, length) variants for key() and value() parameters.
3. Transaction.get() implement missing methods, based on RocksDB.get. Added ByteBuffer.get with and without column family. Added byte[]-as-target get.
4. Transaction.iterator() implement a getIterator() which defaults ReadOptions; as per RocksDB.iterator(). Rationalize support API for this and RocksDB.iterator()
5. RocksDB.merge implement ByteBuffer methods; both direct and indirect buffers. Shadow the methods of RocksDB.put; RocksDB.put only offers ByteBuffer API with explicit WriteOptions. Duplicated this with RocksDB.merge
6. Transaction.merge implement methods as per RocksDB.merge methods. Transaction is already constructed with WriteOptions, so no explicit WriteOptions methods required.
7. Transaction.mergeUntracked implement the same API methods as Transaction.merge except the ones that use assumeTracked, because that’s not a feature of merge untracked.
### Support Changes (C++)
The current JNI code in C++ supports multiple variants of methods through a number of helper functions. There are numerous TODO suggestions in the code proposing that the helpers be re-factored/shared.
We have taken a different approach for the new methods; we have created wrapper classes `JDirectBufferSlice`, `JDirectBufferPinnableSlice`, `JByteArraySlice` and `JByteArrayPinnableSlice` RAII classes which construct slices from JNI parameters and can then be passed directly to RocksDB methods. For instance, the `Java_org_rocksdb_Transaction_getDirect` method is implemented like this:
```
try {
ROCKSDB_NAMESPACE::JDirectBufferSlice key(env, jkey_bb, jkey_off,
jkey_part_len);
ROCKSDB_NAMESPACE::JDirectBufferPinnableSlice value(env, jval_bb, jval_off,
jval_part_len);
ROCKSDB_NAMESPACE::KVException::ThrowOnError(
env, txn->Get(*read_options, column_family_handle, key.slice(),
&value.pinnable_slice()));
return value.Fetch();
} catch (const ROCKSDB_NAMESPACE::KVException& e) {
return e.Code();
}
```
Notice the try/catch mechanism with the `KVException` class, which combined with RAII and the wrapper classes means that there is no ad-hoc cleanup necessary in the JNI methods.
We propose to extend this mechanism to existing JNI methods as further work.
### Support Changes (Java)
Where there are multiple parameter-variant versions of the same method, we use fewer or just one supporting native method for all of them. This makes maintenance a bit easier and reduces the opportunity for coding errors mixing up (untyped) object handles.
In order to support this efficiently, some classes need to have default values for column families and read options added and cached so that they are not re-constructed on every method call.
This PR closes https://github.com/facebook/rocksdb/issues/9776
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11019
Reviewed By: ajkr
Differential Revision: D52039446
Pulled By: jowlyzhang
fbshipit-source-id: 45d0140a4887e42134d2e56520e9b8efbd349660
