Summary:
Solaris support was contributed by outside users starting with d78c6b28c (2016), and no project CI has ever run on Solaris. The last Solaris-motivated change was c76688745 (https://github.com/facebook/rocksdb/issues/4012, June 2018). Four months later, d6ec28870 (https://github.com/facebook/rocksdb/issues/4226, 5.18) gave PerfContext a user-declared destructor while the Solaris-only definition was still `__thread PerfContext perf_context_`, which GCC rejects, so the Solaris build has not compiled since. fd00f39f9 (https://github.com/facebook/rocksdb/issues/8117, 2021) then renamed that definition to `perf_context` while keeping
`#define perf_context (*get_perf_context())` in perf_context_imp.h, so the definition expands to `thread_local PerfContext (*get_perf_context());`, an error still present today. The Solaris-only paths are dead and untestable, yet still attract new carve-outs.
Because Solaris support is apparently unused and complicating things, this change removes all OS_SOLARIS / SunOS handling from the build (Make, CMake, build_detect_platform, INSTALL.md), the portability layer and Env (endianness, gethrtime, directio, stack trace), the perf_context macro and destructor carve-out, Solaris-only test workarounds and exclusions, and RocksJava's Environment.isSolaris() and Solaris JNI library naming.
Not Solaris-specific and kept: SPARC unaligned-access handling in util/coding.h, sparc64 in Makefile machine lists (Linux/OpenBSD), and sparcv9 in RocksJava Environment.is64Bit(). Third-party sources are untouched.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/15449
Test Plan: On non-Solaris platforms every removed condition was either an OS_SOLARIS-only branch or a `!defined(OS_SOLARIS)` term that was always true, so the code compiled is unchanged and the CI matrix covers it. The Solaris breakage was confirmed by syntax-checking monitoring/perf_context.cc with -DOS_SOLARIS (GCC 11, stub sys/isa_defs.h) at each commit touching the perf_context files from c31979205 through fd00f39f9: clean before d6ec28870, failing at every commit from d6ec28870 on.
Reviewed By: archang19
Differential Revision: D126714985
Pulled By: pdillinger
fbshipit-source-id: 40d22fcd5a462375c9d2c93f52407df651286ef7
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/15428
RocksDB counts per-operation statistics (blocks read, bytes read, mutex waits,
timings) in `perf_context`. It is a `thread_local` variable: each thread has its
own copy, so threads never contend on it. This per-thread copy is "thread-local
storage" (TLS).
**Problem**: `PerfContext` has a non-trivial destructor. For such a variable, C++
must make sure the calling thread's copy is constructed before each use from
another source file, so the compiler emits a call to a small "TLS init"
function. That call goes through the PLT (procedure linkage table, the jump
table used to call functions that may live in another shared library). Every
`PERF_COUNTER_ADD` therefore paid a real function call before incrementing a
counter, and these macros run in hot loops such as key comparisons during block
iteration. `perf_level`, the on/off switch, has a smaller cost: it is
`extern thread_local` without `constinit`, so each read also tests whether it
has been initialized.
**Fix**:
- The perf macros read a `constinit thread_local PerfContext*` that each
thread sets on first use. After that, a counter update is a pointer load,
a null check and the increment.
- `perf_level` is declared and defined `constinit`, so reading it is a plain
thread-local load.
- No public API change. `perf_context`, `get_perf_context()` and macro
behavior are unchanged, and so is thread-exit behavior.
**Results**:
- Microbenchmark (`PERF_COUNTER_ADD` in a loop): 2.10 -> 0.84 ns per update
with counting enabled; unchanged at 0.42 ns with counting disabled.
- Calls to the TLS init functions drop from 40 and 96 to 0 in block.cc.o
and memtable.cc.o.
- In CPU profiles of large production RocksDB deployments, these accessors
cost roughly 0.3-0.6% of total CPU. This change removes most of the
`perf_context` part.
Reviewed By: xingbowang
Differential Revision: D125982209
fbshipit-source-id: f38b4fffda09611d28322e7534b135fb35631389
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/15017
## Summary
RocksDB async `GetAsync` and `MultiGetAsync` callbacks now default to a completion-only path. Callbacks can override `EnableStats()` when they need request-specific `PerfContext` or `IOStatsContext`; otherwise RocksDB avoids creating a coroutine stats context and returns null stats pointers. Callbacks must not initiate another async read from `OnComplete()`.
RocksDB stats normally use thread-local storage, which does not compose with interleaved coroutine reads. A stats-enabled request captures only the caller's configuration: perf level, per-level perf enablement, and whether io stats are disabled. It then starts with empty request contexts. `onSet()` loads that request's contexts into TLS, while `onUnset()` saves the accumulated contexts back into request data. On resume, the same contexts are loaded again. This isolates request counters without preserving or restoring pre-existing executor TLS state. The synchronous fallback similarly resets TLS before executing a stats-enabled read.
`PerfContext` and `IOStatsContext` gain `Merge()` support for caller-side aggregation. `PerfContext` move construction and assignment now transfer ownership of per-level state rather than deep-copying it, avoiding allocations during coroutine context handoffs. A fbcode-wide audit found no caller that reads a moved-from `PerfContext`.
`db_bench` opts in only for coroutine jobs that print per-job perf context and merges every completed request's callback stats into the job aggregate.
## Example: Two Async Gets on One Thread
Both callbacks enable stats. Each request starts with empty counters and carries its contexts across suspensions.
```text
Shared executor thread
|
| onSet(A): load A's empty contexts into TLS
| A records 3 reads
| onUnset(A): save TLS contexts back into A
|
| onSet(B): load B's empty contexts into TLS
| B records 4 reads
| onUnset(B): save TLS contexts back into B
|
| onSet(A): load A's contexts containing 3 reads
| A records 2 more reads
| callback A receives block_read_count = 5
|
| onSet(B): load B's contexts containing 4 reads
| callback B receives block_read_count = 4
```
Isolation comes from replacing TLS with the active request's saved contexts on every `onSet()`.
### Timers
Existing wall-clock timers remain in coroutine frames, so timers spanning `co_await` include suspended time and measure end-to-end latency.
Request-level `get_cpu_nanos` is suspension-aware: it starts in `onSet()` and stops in `onUnset()` or `Finalize()`, charging only time while the request is active.
Nested CPU timers remain disabled because normal RAII CPU timers would also charge executor work performed while their coroutine is suspended. `MultiGetAsync` fanout additionally requires per-child timer state to avoid double counting.
## Benchmarks
Benchmarked to confirm no performance regressions when perf is disabled, and also to see the overhead of enabling perf.
```bash
db_bench --benchmarks=<readrandomcoroutine|multireadrandomcoroutine> --db=<db_path> --coro_jobs_per_thread=10 --use_existing_db=true --num=2000000 --value_size=1024 --compression_type=none --threads=8 --batch_size=16 --multiread_batched=true --use_direct_reads=true --cache_size=1428076626 --reads=320000 --perf_level=<1|3> --seed=<seed>
```
| Workload | Before change | Perf level 1 | Before -> 1 | Perf level 3 | 1 -> 3 |
| -------- | ------------- | ------------ | ----------- | ------------ | ------ |
| Async Get | 475.6K ops/s | 476.7K ops/s | +0.2% | 470.5K ops/s | -1.3% |
| Async MultiGet | 567.3K ops/s | 567.4K ops/s | +0.0% | 552.2K ops/s | -2.7% |
Reviewed By: xingbowang
Differential Revision: D112634874
fbshipit-source-id: 94e240aeb1496fa12dac995b5aa5a9c3543cc5fc
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/14991
D91705195 ("Replace Prefetch Logic in BlockBasedTableIterator with IODispatcher") moved MultiScan block prefetching out of BlockBasedTableIterator and into the IODispatcher. The IO-level RecordTick/RecordInHistogram calls lived in the deleted prefetch code, and the IODispatcher was not given equivalent instrumentation, so these tickers were still defined but never populated (they published as absent):
- MULTISCAN_BLOCKS_PREFETCHED
- MULTISCAN_BLOCKS_FROM_CACHE
- MULTISCAN_PREFETCH_BYTES
- MULTISCAN_IO_REQUESTS
- MULTISCAN_IO_COALESCED_NONADJACENT
- MULTISCAN_BLOCKS_PER_PREPARE (histogram)
The PREPARE_*, SEEK_ERRORS, and PREFETCH_BLOCKS_WASTED tickers were unaffected (recorded on the prepare/teardown path, which was not replaced).
Fix:
- ReadSet now exposes generic, caller-agnostic prefetch counters (GetNumBlocksPrefetched, GetNumIORequests, GetPrefetchBytes, GetNumCoalescedNonadjacent), incremented once per block in DispatchPrefetch -- the single choke point for both immediate and memory-deferred dispatch. Counting at dispatch time (not completion) keeps async and deferred prefetches accounted for without double counting the async->sync fallback.
- PrepareIORequests now outputs prefetch_bytes (sum of request len) and num_coalesced_nonadjacent (within-threshold gap count) while building coalesced requests, per review feedback to avoid the extra pass over read_reqs/coalesced_block_indices at former line 836. DispatchPrefetch now gets stats directly from PrepareIORequests.
- The MULTISCAN_* ticker names stay at the caller: MultiScanIndexIterator's destructor records the aggregate counters at end-of-scan (alongside the existing PREFETCH_BLOCKS_WASTED), so async/deferred reads that complete during iteration are included. MULTISCAN_BLOCKS_PER_PREPARE is recorded in BlockBasedTableIterator::Prepare. This keeps the IODispatcher a generic mechanism rather than leaking a caller's metric names into it.
- Also plumb the same metrics into PerfContext for per-operation visibility.
Reviewed By: xingbowang
Differential Revision: D113356436
fbshipit-source-id: 660e9755d6b1b9aecccd112df94eb6838061b298
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/14557
RocksDB's PerfContext tracks block_decompress_time but has no counter for the
number of block decompressions. The global Statistics ticker
NUMBER_BLOCK_DECOMPRESSED exists but is not accessible through PerfContext,
which is the thread-local, per-operation metric system used by benchmarks.
Add block_decompress_count as a new PerfContext counter (gated at
kEnableCount level) incremented in DecompressBlockData alongside the existing
NUMBER_BLOCK_DECOMPRESSED ticker. This enables benchmarks and applications to
observe how many blocks required decompression per operation, complementing
the existing block_read_count.
Reviewed By: anand1976
Differential Revision: D99233514
fbshipit-source-id: 40a68c1d9321f560cebdb7c30a544a0c62ae64f0
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/14473
Add separate PerfContext byte counters for data, index, filter, compression-dictionary, and metadata block reads while preserving block_read_byte as the aggregate. Wire the new counters through the block fetch and multi-read data block paths, expose them via the C perfcontext API, and extend table tests to verify byte attribution and that the classified counters sum back to block_read_byte.
Reviewed By: xingbowang
Differential Revision: D97333746
fbshipit-source-id: 3411844d7fa9c76c9ff28af477b3a72a5d6e5d9b
Summary:
As titled. And also added some documentation for an approach to name perf context metrics that can help identify the starting `PerfLevel` that enables collecting it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/13219
Test Plan: Unit test
Reviewed By: hx235
Differential Revision: D67362022
Pulled By: jowlyzhang
fbshipit-source-id: 7ed1bb475b5497961612d4e331600609da42074b
Summary:
... which is the default for CentOS 9 and Ubuntu 24, the latter of which is now available in GitHub Actions. Relevant CI job updated.
Re-formatted all cc|c|h files except in third-party/, using
```
clang-format -i `git ls-files | grep -E '[.](cc|c|h)$' | grep -v third-party/`
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/13233
Test Plan: CI
Reviewed By: jaykorean, archang19
Differential Revision: D67461638
Pulled By: pdillinger
fbshipit-source-id: 0c9ac21a3f5eea6f5ade68bb6af7b6ba16c8b301
Summary:
**Context/Summary:**
Motived by user need of investigating db iterator behavior during an interval of any time length of a certain thread, we decide to collect and expose related counters in `PerfContext` as an experimental feature, in addition to the existing db-scope ones (i.e, tickers)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11320
Test Plan:
- new UT
- db bench
Setup
```
./db_bench -db=/dev/shm/testdb/ -benchmarks="fillseq" -key_size=32 -value_size=512 -num=1000000 -compression_type=none -bloom_bits=3
```
Test till converges
```
./db_bench -seed=1679526311157283 -use_existing_db=1 -perf_level=2 -db=/dev/shm/testdb/ -benchmarks="seekrandom[-X60]"
```
pre-change
`seekrandom [AVG 33 runs] : 7545 (± 100) ops/sec`
post-change (no regression)
`seekrandom [AVG 33 runs] : 7688 (± 67) ops/sec`
Reviewed By: cbi42
Differential Revision: D44321931
Pulled By: hx235
fbshipit-source-id: f98a254ba3e3ced95eb5928884e33f1b99dca401
Summary:
The existing PerfContext counter `internal_merge_count` only tracks the
Merge operands applied during range scans. The patch adds a new counter
called `internal_merge_count_point_lookups` to track the same metric
for point lookups (`Get` / `MultiGet` / `GetEntity` / `MultiGetEntity`), and
also fixes a couple of cases in the iterator where the existing counter wasn't
updated.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11284
Test Plan: `make check`
Reviewed By: jowlyzhang
Differential Revision: D43926082
Pulled By: ltamasi
fbshipit-source-id: 321566d8b4cf0a3b6c9b73b7a5c984fb9bb492e9
Summary:
Delete range logic is moved from `DBIter` to `MergingIterator`, and `MergingIterator` will seek to the end of a range deletion if possible instead of scanning through each key and check with `RangeDelAggregator`.
With the invariant that a key in level L (consider memtable as the first level, each immutable and L0 as a separate level) has a larger sequence number than all keys in any level >L, a range tombstone `[start, end)` from level L covers all keys in its range in any level >L. This property motivates optimizations in iterator:
- in `Seek(target)`, if level L has a range tombstone `[start, end)` that covers `target.UserKey`, then for all levels > L, we can do Seek() on `end` instead of `target` to skip some range tombstone covered keys.
- in `Next()/Prev()`, if the current key is covered by a range tombstone `[start, end)` from level L, we can do `Seek` to `end` for all levels > L.
This PR implements the above optimizations in `MergingIterator`. As all range tombstone covered keys are now skipped in `MergingIterator`, the range tombstone logic is removed from `DBIter`. The idea in this PR is similar to https://github.com/facebook/rocksdb/issues/7317, but this PR leaves `InternalIterator` interface mostly unchanged. **Credit**: the cascading seek optimization and the sentinel key (discussed below) are inspired by [Pebble](https://github.com/cockroachdb/pebble/blob/master/merging_iter.go) and suggested by ajkr in https://github.com/facebook/rocksdb/issues/7317. The two optimizations are mostly implemented in `SeekImpl()/SeekForPrevImpl()` and `IsNextDeleted()/IsPrevDeleted()` in `merging_iterator.cc`. See comments for each method for more detail.
One notable change is that the minHeap/maxHeap used by `MergingIterator` now contains range tombstone end keys besides point key iterators. This helps to reduce the number of key comparisons. For example, for a range tombstone `[start, end)`, a `start` and an `end` `HeapItem` are inserted into the heap. When a `HeapItem` for range tombstone start key is popped from the minHeap, we know this range tombstone becomes "active" in the sense that, before the range tombstone's end key is popped from the minHeap, all the keys popped from this heap is covered by the range tombstone's internal key range `[start, end)`.
Another major change, *delete range sentinel key*, is made to `LevelIterator`. Before this PR, when all point keys in an SST file are iterated through in `MergingIterator`, a level iterator would advance to the next SST file in its level. In the case when an SST file has a range tombstone that covers keys beyond the SST file's last point key, advancing to the next SST file would lose this range tombstone. Consequently, `MergingIterator` could return keys that should have been deleted by some range tombstone. We prevent this by pretending that file boundaries in each SST file are sentinel keys. A `LevelIterator` now only advance the file iterator once the sentinel key is processed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10449
Test Plan:
- Added many unit tests in db_range_del_test
- Stress test: `./db_stress --readpercent=5 --prefixpercent=19 --writepercent=20 -delpercent=10 --iterpercent=44 --delrangepercent=2`
- Additional iterator stress test is added to verify against iterators against expected state: https://github.com/facebook/rocksdb/issues/10538. This is based on ajkr's previous attempt https://github.com/facebook/rocksdb/pull/5506#issuecomment-506021913.
```
python3 ./tools/db_crashtest.py blackbox --simple --write_buffer_size=524288 --target_file_size_base=524288 --max_bytes_for_level_base=2097152 --compression_type=none --max_background_compactions=8 --value_size_mult=33 --max_key=5000000 --interval=10 --duration=7200 --delrangepercent=3 --delpercent=9 --iterpercent=25 --writepercent=60 --readpercent=3 --prefixpercent=0 --num_iterations=1000 --range_deletion_width=100 --verify_iterator_with_expected_state_one_in=1
```
- Performance benchmark: I used a similar setup as in the blog [post](http://rocksdb.org/blog/2018/11/21/delete-range.html) that introduced DeleteRange, "a database with 5 million data keys, and 10000 range tombstones (ignoring those dropped during compaction) that were written in regular intervals after 4.5 million data keys were written". As expected, the performance with this PR depends on the range tombstone width.
```
# Setup:
TEST_TMPDIR=/dev/shm ./db_bench_main --benchmarks=fillrandom --writes=4500000 --num=5000000
TEST_TMPDIR=/dev/shm ./db_bench_main --benchmarks=overwrite --writes=500000 --num=5000000 --use_existing_db=true --writes_per_range_tombstone=50
# Scan entire DB
TEST_TMPDIR=/dev/shm ./db_bench_main --benchmarks=readseq[-X5] --use_existing_db=true --num=5000000 --disable_auto_compactions=true
# Short range scan (10 Next())
TEST_TMPDIR=/dev/shm/width-100/ ./db_bench_main --benchmarks=seekrandom[-X5] --use_existing_db=true --num=500000 --reads=100000 --seek_nexts=10 --disable_auto_compactions=true
# Long range scan(1000 Next())
TEST_TMPDIR=/dev/shm/width-100/ ./db_bench_main --benchmarks=seekrandom[-X5] --use_existing_db=true --num=500000 --reads=2500 --seek_nexts=1000 --disable_auto_compactions=true
```
Avg over of 10 runs (some slower tests had fews runs):
For the first column (tombstone), 0 means no range tombstone, 100-10000 means width of the 10k range tombstones, and 1 means there is a single range tombstone in the entire DB (width is 1000). The 1 tombstone case is to test regression when there's very few range tombstones in the DB, as no range tombstone is likely to take a different code path than with range tombstones.
- Scan entire DB
| tombstone width | Pre-PR ops/sec | Post-PR ops/sec | ±% |
| ------------- | ------------- | ------------- | ------------- |
| 0 range tombstone |2525600 (± 43564) |2486917 (± 33698) |-1.53% |
| 100 |1853835 (± 24736) |2073884 (± 32176) |+11.87% |
| 1000 |422415 (± 7466) |1115801 (± 22781) |+164.15% |
| 10000 |22384 (± 227) |227919 (± 6647) |+918.22% |
| 1 range tombstone |2176540 (± 39050) |2434954 (± 24563) |+11.87% |
- Short range scan
| tombstone width | Pre-PR ops/sec | Post-PR ops/sec | ±% |
| ------------- | ------------- | ------------- | ------------- |
| 0 range tombstone |35398 (± 533) |35338 (± 569) |-0.17% |
| 100 |28276 (± 664) |31684 (± 331) |+12.05% |
| 1000 |7637 (± 77) |25422 (± 277) |+232.88% |
| 10000 |1367 |28667 |+1997.07% |
| 1 range tombstone |32618 (± 581) |32748 (± 506) |+0.4% |
- Long range scan
| tombstone width | Pre-PR ops/sec | Post-PR ops/sec | ±% |
| ------------- | ------------- | ------------- | ------------- |
| 0 range tombstone |2262 (± 33) |2353 (± 20) |+4.02% |
| 100 |1696 (± 26) |1926 (± 18) |+13.56% |
| 1000 |410 (± 6) |1255 (± 29) |+206.1% |
| 10000 |25 |414 |+1556.0% |
| 1 range tombstone |1957 (± 30) |2185 (± 44) |+11.65% |
- Microbench does not show significant regression: https://gist.github.com/cbi42/59f280f85a59b678e7e5d8561e693b61
Reviewed By: ajkr
Differential Revision: D38450331
Pulled By: cbi42
fbshipit-source-id: b5ef12e8d8c289ed2e163ccdf277f5039b511fca
Summary:
The RocksDB iterator is a hierarchy of iterators. MergingIterator maintains a heap of LevelIterators, one for each L0 file and for each non-zero level. The Seek() operation naturally lends itself to parallelization, as it involves positioning every LevelIterator on the correct data block in the correct SST file. It lookups a level for a target key, to find the first key that's >= the target key. This typically involves reading one data block that is likely to contain the target key, and scan forward to find the first valid key. The forward scan may read more data blocks. In order to find the right data block, the iterator may read some metadata blocks (required for opening a file and searching the index).
This flow can be parallelized.
Design: Seek will be called two times under async_io option. First seek will send asynchronous request to prefetch the data blocks at each level and second seek will follow the normal flow and in FilePrefetchBuffer::TryReadFromCacheAsync it will wait for the Poll() to get the results and add the iterator to min_heap.
- Status::TryAgain is passed down from FilePrefetchBuffer::PrefetchAsync to block_iter_.Status indicating asynchronous request has been submitted.
- If for some reason asynchronous request returns error in submitting the request, it will fallback to sequential reading of blocks in one pass.
- If the data already exists in prefetch_buffer, it will return the data without prefetching further and it will be treated as single pass of seek.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9994
Test Plan:
- **Run Regressions.**
```
./db_bench -db=/tmp/prefix_scan_prefetch_main -benchmarks="fillseq" -key_size=32 -value_size=512 -num=5000000 -use_direct_io_for_flush_and_compaction=true -target_file_size_base=16777216
```
i) Previous release 7.0 run for normal prefetching with async_io disabled:
```
./db_bench -use_existing_db=true -db=/tmp/prefix_scan_prefetch_main -benchmarks="seekrandom" -key_size=32 -value_size=512 -num=5000000 -use_direct_reads=true -seek_nexts=327680 -duration=120 -ops_between_duration_checks=1
Initializing RocksDB Options from the specified file
Initializing RocksDB Options from command-line flags
RocksDB: version 7.0
Date: Thu Mar 17 13:11:34 2022
CPU: 24 * Intel Core Processor (Broadwell)
CPUCache: 16384 KB
Keys: 32 bytes each (+ 0 bytes user-defined timestamp)
Values: 512 bytes each (256 bytes after compression)
Entries: 5000000
Prefix: 0 bytes
Keys per prefix: 0
RawSize: 2594.0 MB (estimated)
FileSize: 1373.3 MB (estimated)
Write rate: 0 bytes/second
Read rate: 0 ops/second
Compression: Snappy
Compression sampling rate: 0
Memtablerep: SkipListFactory
Perf Level: 1
------------------------------------------------
DB path: [/tmp/prefix_scan_prefetch_main]
seekrandom : 483618.390 micros/op 2 ops/sec; 338.9 MB/s (249 of 249 found)
```
ii) normal prefetching after changes with async_io disable:
```
./db_bench -use_existing_db=true -db=/tmp/prefix_scan_prefetch_main -benchmarks="seekrandom" -key_size=32 -value_size=512 -num=5000000 -use_direct_reads=true -seek_nexts=327680 -duration=120 -ops_between_duration_checks=1
Set seed to 1652922591315307 because --seed was 0
Initializing RocksDB Options from the specified file
Initializing RocksDB Options from command-line flags
RocksDB: version 7.3
Date: Wed May 18 18:09:51 2022
CPU: 32 * Intel Xeon Processor (Skylake)
CPUCache: 16384 KB
Keys: 32 bytes each (+ 0 bytes user-defined timestamp)
Values: 512 bytes each (256 bytes after compression)
Entries: 5000000
Prefix: 0 bytes
Keys per prefix: 0
RawSize: 2594.0 MB (estimated)
FileSize: 1373.3 MB (estimated)
Write rate: 0 bytes/second
Read rate: 0 ops/second
Compression: Snappy
Compression sampling rate: 0
Memtablerep: SkipListFactory
Perf Level: 1
------------------------------------------------
DB path: [/tmp/prefix_scan_prefetch_main]
seekrandom : 483080.466 micros/op 2 ops/sec 120.287 seconds 249 operations; 340.8 MB/s (249 of 249 found)
```
iii) db_bench with async_io enabled completed succesfully
```
./db_bench -use_existing_db=true -db=/tmp/prefix_scan_prefetch_main -benchmarks="seekrandom" -key_size=32 -value_size=512 -num=5000000 -use_direct_reads=true -seek_nexts=327680 -duration=120 -ops_between_duration_checks=1 -async_io=1 -adaptive_readahead=1
Set seed to 1652924062021732 because --seed was 0
Initializing RocksDB Options from the specified file
Initializing RocksDB Options from command-line flags
RocksDB: version 7.3
Date: Wed May 18 18:34:22 2022
CPU: 32 * Intel Xeon Processor (Skylake)
CPUCache: 16384 KB
Keys: 32 bytes each (+ 0 bytes user-defined timestamp)
Values: 512 bytes each (256 bytes after compression)
Entries: 5000000
Prefix: 0 bytes
Keys per prefix: 0
RawSize: 2594.0 MB (estimated)
FileSize: 1373.3 MB (estimated)
Write rate: 0 bytes/second
Read rate: 0 ops/second
Compression: Snappy
Compression sampling rate: 0
Memtablerep: SkipListFactory
Perf Level: 1
------------------------------------------------
DB path: [/tmp/prefix_scan_prefetch_main]
seekrandom : 553913.576 micros/op 1 ops/sec 120.199 seconds 217 operations; 293.6 MB/s (217 of 217 found)
```
- db_stress with async_io disabled completed succesfully
```
export CRASH_TEST_EXT_ARGS=" --async_io=0"
make crash_test -j
```
I**n Progress**: db_stress with async_io is failing and working on debugging/fixing it.
Reviewed By: anand1976
Differential Revision: D36459323
Pulled By: akankshamahajan15
fbshipit-source-id: abb1cd944abe712bae3986ae5b16704b3338917c
Summary:
ROCKSDB_SUPPORT_THREAD_LOCAL definition has been removed.
`__thread`(#define) has been replaced with `thread_local`(C++ keyword) across the code base.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10015
Reviewed By: siying
Differential Revision: D36485491
Pulled By: pdillinger
fbshipit-source-id: 6522d212514ee190b90b4e2750c80c7e34013c78
Summary:
Before this PR, `get_iostats_context()` will silently return a nullptr if no thread_local support is detected.
This can be the result of build_detect_platform's failure to compile the simple code snippet on certain platforms, as
reported in https://github.com/facebook/mysql-5.6/issues/904.
To be safe, we should fail the compilation if user does not opt out IOStatsContext and
ROCKSDB_SUPPORT_THREAD_LOCAL is not defined.
If RocksDB relies on c++11, can we just always use thread_local? It turns out there might be
performance concerns (https://github.com/facebook/rocksdb/issues/5774),
which is beyond the scope of this PR. We can revisit this later. Here, we stick to the original impl.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8117
Reviewed By: ajkr
Differential Revision: D27356847
Pulled By: riversand963
fbshipit-source-id: f7d5776842277598d8341b955febb601946801ae
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433
Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.
Differential Revision: D19977691
fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
Summary:
Introduce CPU timers for iterator seek and next operations. Seek
counter includes SeekToFirst, SeekToLast and SeekForPrev, w/ the
caveat that SeekToLast timer doesn't include some post processing
time if upper bound is defined.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5076
Differential Revision: D14525218
Pulled By: fredfsh
fbshipit-source-id: 03ba25df3b22b06c072621e4de0eacfa1445f0d9
Summary:
Existing implementation of PerfContext does not define copy constructor or assignment operator, which could potentially cause problems when user create copies and resets the builtin one. This PR address the issue by providing these two constructors with deep copy semantics.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4919
Differential Revision: D13960406
Pulled By: miasantreble
fbshipit-source-id: 36aab5aaee65d4480f537e4e22148faa45e8e334
Summary:
- If block cache disabled or not used for meta-blocks, `BlockBasedTableReader::Rep::uncompression_dict` owns the `UncompressionDict`. It is preloaded during `PrefetchIndexAndFilterBlocks`.
- If block cache is enabled and used for meta-blocks, block cache owns the `UncompressionDict`, which holds dictionary and digested dictionary when needed. It is never prefetched though there is a TODO for this in the code. The cache key is simply the compression dictionary block handle.
- New stats for compression dictionary accesses in block cache: "BLOCK_CACHE_COMPRESSION_DICT_*" and "compression_dict_block_read_count"
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4881
Differential Revision: D13663801
Pulled By: ajkr
fbshipit-source-id: bdcc54044e180855cdcc57639b493b0e016c9a3f
Summary:
Add a new per level counter for block cache hits, increase it by one on every successful attempt to get an entry from cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4796
Differential Revision: D13513688
Pulled By: zinoale
fbshipit-source-id: 104df038f1232e3356e162eb2d8ca138e34a8281
Summary:
Introduce the first CPU timing counter, perf_context.get_cpu_nanos. This opens a door to more CPU counters in the future.
Only Posix Env has it implemented using clock_gettime() with CLOCK_THREAD_CPUTIME_ID. How accurate the counter is depends on the platform.
Make PerfStepTimer to take an Env as an argument, and sometimes pass it in. The direct reason is to make the unit tests to use SpecialEnv where we can ingest logic there. But in long term, this is a good change.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4741
Differential Revision: D13287798
Pulled By: siying
fbshipit-source-id: 090361049d9d5095d1d1a369fe1338d2e2e1c73f
Summary:
Add counters to track block cache index/filter hits and misses. We currently count aggregate hits and misses, which includes index/filter/data blocks.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4540
Differential Revision: D10459652
Pulled By: anand1976
fbshipit-source-id: 0c59eee7f12f5103dcb6686f0e7995babe63d425
Summary:
Current implementation of perf context is level agnostic. Making it hard to do performance evaluation for the LSM tree. This PR adds `PerfContextByLevel` to decompose the counters by level.
This will be helpful when analyzing point and range query performance as well as tuning bloom filter
Also replaced __thread with thread_local keyword for perf_context
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4226
Differential Revision: D10369509
Pulled By: miasantreble
fbshipit-source-id: f1ced4e0de5fcebdb7f9cff36164516bc6382d82
Summary:
There's a group of stats in PerfContext for profiling the write path. They break down the write time into WAL write, memtable insert, throttling, and everything else. We use these stats a lot for figuring out the cause of slow writes.
These stats got a bit out of date and are now categorizing some interesting things as "everything else", and also do some double counting. This PR fixes it and adds two new stats: time spent waiting for other threads of the batch group, and time spent waiting for scheduling flushes/compactions. Probably these will be enough to explain all the occasional abnormally slow (multiple seconds) writes that we're seeing.
Closes https://github.com/facebook/rocksdb/pull/3602
Differential Revision: D7251562
Pulled By: al13n321
fbshipit-source-id: 0a2d0f5a4fa5677455e1f566da931cb46efe2a0d
Summary:
Adds two new counters:
`key_lock_wait_count` counts how many times a lock was blocked by another transaction and had to wait, instead of being granted the lock immediately.
`key_lock_wait_time` counts the time spent acquiring locks.
Closes https://github.com/facebook/rocksdb/pull/3107
Differential Revision: D6217332
Pulled By: lth
fbshipit-source-id: 55d4f46da5550c333e523263422fd61d6a46deb9
Summary:
With this PR, we can measure read-amp for queries where perf_context is enabled as follows:
```
SetPerfLevel(kEnableCount);
Get(1, "foo");
double read_amp = static_cast<double>(get_perf_context()->block_read_byte / get_perf_context()->get_read_bytes);
SetPerfLevel(kDisable);
```
Our internal infra enables perf_context for a sampling of queries. So we'll be able to compute the read-amp for the sample set, which can give us a good estimate of read-amp.
Closes https://github.com/facebook/rocksdb/pull/2749
Differential Revision: D5647240
Pulled By: ajkr
fbshipit-source-id: ad73550b06990cf040cc4528fa885360f308ec12
Summary:
… headers
https://github.com/facebook/rocksdb/pull/2199 should not reference RocksDB-specific macros (like ROCKSDB_SUPPORT_THREAD_LOCAL in this case) to public headers, `iostats_context.h` and `perf_context.h`. We shouldn't do that because users have to provide these compiler flags when building their binary with RocksDB.
We should hide the thread local global variable inside our implementation and just expose a function api to retrieve these variables. It may break some users for now but good for long term.
make check -j64
Closes https://github.com/facebook/rocksdb/pull/2380
Differential Revision: D5177896
Pulled By: lightmark
fbshipit-source-id: 6fcdfac57f2e2dcfe60992b7385c5403f6dcb390
Summary:
We've had a couple CockroachDB users fail to build RocksDB on exotic platforms, so I figured I'd try my hand at solving these issues upstream. The problems stem from a) `USE_SSE=1` being too aggressive about turning on SSE4.2, even on toolchains that don't support SSE4.2 and b) RocksDB attempting to detect support for thread-local storage based on OS, even though it can vary by compiler on the same OS.
See the individual commit messages for details. Regarding SSE support, this PR should change virtually nothing for non-CMake based builds. `make`, `PORTABLE=1 make`, `USE_SSE=1 make`, and `PORTABLE=1 USE_SSE=1 make` function exactly as before, except that SSE support will be automatically disabled when a simple SSE4.2-using test program fails to compile, as it does on OpenBSD. (OpenBSD's ports GCC supports SSE4.2, but its binutils do not, so `__SSE_4_2__` is defined but an SSE4.2-using program will fail to assemble.) A warning is emitted in this case. The CMake build is modified to support the same set of options, except that `USE_SSE` is spelled `FORCE_SSE42` because `USE_SSE` is rather useless now that we can automatically detect SSE support, and I figure changing options in the CMake build is less disruptive than changing the non-CMake build.
I've tested these changes on all the platforms I can get my hands on (macOS, Windows MSVC, Windows MinGW, and OpenBSD) and it all works splendidly. Let me know if there's anything you object to—I obviously don't mean to break any of your build pipelines in the process of fixing ours downstream.
Closes https://github.com/facebook/rocksdb/pull/2199
Differential Revision: D5054042
Pulled By: yiwu-arbug
fbshipit-source-id: 938e1fc665c049c02ae15698e1409155b8e72171
Summary:
Workaround for Solaris gcc binary. Program is crashing, because when TLS of perf context that is used twice on same frame, it is damaged thus Segmentation fault.
Issue: #2153
Closes https://github.com/facebook/rocksdb/pull/2187
Differential Revision: D4922274
Pulled By: siying
fbshipit-source-id: 549105ebce9a8ce08a737f4d6b9f2312ebcde9a8
Summary:
Move some files under util/ to new directories env/, monitoring/ options/ and cache/
Closes https://github.com/facebook/rocksdb/pull/2090
Differential Revision: D4833681
Pulled By: siying
fbshipit-source-id: 2fd8bef
