Summary:
Add file size validation in ReadFooterFromFile function.
Deprecate skip_checking_sst_file_sizes_on_db_open option.
This change is used to address this issue
https://github.com/facebook/rocksdb/issues/13619
It supports file size validation in ReadFooterFromFile. In favor of this
change, CheckConsistency function and
skip_checking_sst_file_sizes_on_db_open flag are deprecated.
The CheckConsistency function checks each file size matches what was
recorded in manifest during DB open. Meantime, ReadFooterFromFile was
called for each file in LoadTables function. Since ReadFooterFromFile
always validates file size, the CheckConsistency is redundant.
In addtion, CheckConsistency is executed in a single thread. This could
slow down DB open when a network file system is used. Therefore, the
flag skip_checking_sst_file_sizes_on_db_open was added to skip this
check. After this change, ReadFooterFromFile was executed in parallel
through multiple threads. Therefore, the concern of DB open slowness is
eliminated, and the flag could be deprecated.
When paranoid check flag is set to true, corrupted file will fail to open the DB.
When paranoid check flag is set to false, DB will still be able to open, the
healthy ones can be accessed, while the corrupted ones not.
There is 2 slight concerns of this change.
*If max_open_files is set with smaller value, engine will not open all
the files during DB open. This means if there is a corruption on file
size, it will not be detected during DB open, but rather at a later
time. Since the default is -1, which means open all the files, and it is
rarely overridden and a lot of new features rely on it to be -1, the
risk is very low.
*If FIFO compaction is used, engine could fail to open DB unnecessarily
on the corrupted files that would never be used again. However, this is
a very rare case as well. The error could still be ignored by setting
paranoid_checks operationally. The risk is very low.
To remain backward compatibility. The public facing flag was kept and
marked as no-op internally. Another change is required to fully remove
the flag.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/13676
Test Plan:
make check
A new unit test was added to validate file size check API works as
expected.
Reviewed By: pdillinger
Differential Revision: D76168033
Pulled By: xingbowang
fbshipit-source-id: 8ceacf39bcfe02ff7aa289868c341366ee9f3a8e
Summary:
... which is the default for CentOS 9 and Ubuntu 24, the latter of which is now available in GitHub Actions. Relevant CI job updated.
Re-formatted all cc|c|h files except in third-party/, using
```
clang-format -i `git ls-files | grep -E '[.](cc|c|h)$' | grep -v third-party/`
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/13233
Test Plan: CI
Reviewed By: jaykorean, archang19
Differential Revision: D67461638
Pulled By: pdillinger
fbshipit-source-id: 0c9ac21a3f5eea6f5ade68bb6af7b6ba16c8b301
Summary:
We haven't been actively mantaining RocksDB LITE recently and the size must have been gone up significantly. We are removing the support.
Most of changes were done through following comments:
unifdef -m -UROCKSDB_LITE `git grep -l ROCKSDB_LITE | egrep '[.](cc|h)'`
by Peter Dillinger. Others changes were manually applied to build scripts, CircleCI manifests, ROCKSDB_LITE is used in an expression and file db_stress_test_base.cc.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11147
Test Plan: See CI
Reviewed By: pdillinger
Differential Revision: D42796341
fbshipit-source-id: 4920e15fc2060c2cd2221330a6d0e5e65d4b7fe2
Summary:
Ran `find ./db/ -type f | xargs clang-format -i`. Excluded minor changes it tried to make on db/db_impl/. Everything else it changed was directly under db/ directory. Included minor manual touchups mentioned in PR commit history.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10910
Reviewed By: riversand963
Differential Revision: D40880683
Pulled By: ajkr
fbshipit-source-id: cfe26cda05b3fb9a72e3cb82c286e21d8c5c4174
Summary:
The PerThreadDBPath has already specified a slash. It does not need to be specified when initializing the test path.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8555
Reviewed By: ajkr
Differential Revision: D29758399
Pulled By: jay-zhuang
fbshipit-source-id: 6d2b878523e3e8580536e2829cb25489844d9011
Summary:
The main improvement here is to not include `.` or `..` in the results of `Env::GetChildren`. The occurrence of `.` or `..`; it is non-portable, dependent on the Operating System and the File System. See: https://www.gnu.org/software/libc/manual/html_node/Reading_002fClosing-Directory.html
There were lots of duplicate checks spread through the RocksDB codebase previously to skip `.` and `..`. This new removes the need for those at the source.
Also some minor fixes to `Env::GetChildren`:
* Improve error handling in POSIX implementation
* Remove unnecessary array allocation on Windows
* Fix struct name for Windows Non-UTF-8 API
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7819
Reviewed By: ajkr
Differential Revision: D25837394
Pulled By: jay-zhuang
fbshipit-source-id: 1e137e7218d38b450af9c083f73d5357abcbba2e
Summary:
This PR does a few things:
1. The MockFileSystem class was split out from the MockEnv. This change would theoretically allow a MockFileSystem to be used by other Environments as well (if we created a means of constructing one). The MockFileSystem implements a FileSystem in its entirety and does not rely on any Wrapper implementation.
2. Make the RocksDB test suite work when MOCK_ENV=1 and ENCRYPTED_ENV=1 are set. To accomplish this, a few things were needed:
- The tests that tried to use the "wrong" environment (Env::Default() instead of env_) were updated
- The MockFileSystem was changed to support the features it was missing or mishandled (such as recursively deleting files in a directory or supporting renaming of a directory).
3. Updated the test framework to have a ROCKSDB_GTEST_SKIP macro. This can be used to flag tests that are skipped. Currently, this defaults to doing nothing (marks the test as SUCCESS) but will mark the tests as SKIPPED when RocksDB is upgraded to a version of gtest that supports this (gtest-1.10).
I have run a full "make check" with MEM_ENV, ENCRYPTED_ENV, both, and neither under both MacOS and RedHat. A few tests were disabled/skipped for the MEM/ENCRYPTED cases. The error_handler_fs_test fails/hangs for MEM_ENV (presumably a timing problem) and I will introduce another PR/issue to track that problem. (I will also push a change to disable those tests soon). There is one more test in DBTest2 that also fails which I need to investigate or skip before this PR is merged.
Theoretically, this PR should also allow the test suite to run against an Env loaded from the registry, though I do not have one to try it with currently.
Finally, once this is accepted, it would be nice if there was a CircleCI job to run these tests on a checkin so this effort does not become stale. I do not know how to do that, so if someone could write that job, it would be appreciated :)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7566
Reviewed By: zhichao-cao
Differential Revision: D24408980
Pulled By: jay-zhuang
fbshipit-source-id: 911b1554a4d0da06fd51feca0c090a4abdcb4a5f
Summary:
After https://github.com/facebook/rocksdb/pull/7036, we still see extra DBTest that can timeout when running 10 or 20 in parallel. Expand skip-fsync mode in whole DBTest. Still preserve other tests from doing this mode to be conservative.
This commit reinstates https://github.com/facebook/rocksdb/issues/7049, whose un-revert was lost in an automatic
infrastructure mis-merge.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7274
Test Plan: Run all existing files.
Reviewed By: pdillinger
Differential Revision: D23177444
fbshipit-source-id: 1f61690b2ac6333c3b2c87176fef6b2cba086b33
Summary:
After https://github.com/facebook/rocksdb/pull/7036, we still see extra DBTest that can timeout when running 10 or 20 in parallel. Expand skip-fsync mode in whole DBTest. Still preserve other tests from doing this mode to be conservative.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7049
Test Plan: Run all existing files.
Reviewed By: pdillinger
Differential Revision: D22301700
fbshipit-source-id: f9a9e3b3b26ce640665a47cb8bff33ba0c89b565
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433
Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.
Differential Revision: D19977691
fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
Summary:
Fixes https://github.com/facebook/rocksdb/issues/5734. By reading the code the assert don't quite make sense to me, since `dataSize` and `fileOffset` has no correlation. But my knowledge about `EncryptedEnv` is very limited.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5735
Test Plan:
run `ENCRYPTED_ENV=1 ./db_encryption_test`
Signed-off-by: Yi Wu <yiwu@pingcap.com>
Differential Revision: D17133849
fbshipit-source-id: bb7262d308e5b2503c400b180edc252668df0ef0
Summary:
There are too many types of files under util/. Some test related files don't belong to there or just are just loosely related. Mo
ve them to a new directory test_util/, so that util/ is cleaner.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5377
Differential Revision: D15551366
Pulled By: siying
fbshipit-source-id: 0f5c8653832354ef8caa31749c0143815d719e2c
Summary:
Ran the following commands to recursively change all the files under RocksDB:
```
find . -type f -name "*.cc" -exec sed -i 's/ unique_ptr/ std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<unique_ptr/<std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/ shared_ptr/ std::shared_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<shared_ptr/<std::shared_ptr/g' {} +
```
Running `make format` updated some formatting on the files touched.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4638
Differential Revision: D12934992
Pulled By: sagar0
fbshipit-source-id: 45a15d23c230cdd64c08f9c0243e5183934338a8
Summary:
This PR adds support for encrypting data stored by RocksDB when written to disk.
It adds an `EncryptedEnv` override of the `Env` class with matching overrides for sequential&random access files.
The encryption itself is done through a configurable `EncryptionProvider`. This class creates is asked to create `BlockAccessCipherStream` for a file. This is where the actual encryption/decryption is being done.
Currently there is a Counter mode implementation of `BlockAccessCipherStream` with a `ROT13` block cipher (NOTE the `ROT13` is for demo purposes only!!).
The Counter operation mode uses an initial counter & random initialization vector (IV).
Both are created randomly for each file and stored in a 4K (default size) block that is prefixed to that file. The `EncryptedEnv` implementation is such that clients of the `Env` class do not see this prefix (nor data, nor in filesize).
The largest part of the prefix block is also encrypted, and there is room left for implementation specific settings/values/keys in there.
To test the encryption, the `DBTestBase` class has been extended to consider a new environment variable called `ENCRYPTED_ENV`. If set, the test will setup a encrypted instance of the `Env` class to use for all tests.
Typically you would run it like this:
```
ENCRYPTED_ENV=1 make check_some
```
There is also an added test that checks that some data inserted into the database is or is not "visible" on disk. With `ENCRYPTED_ENV` active it must not find plain text strings, with `ENCRYPTED_ENV` unset, it must find the plain text strings.
Closes https://github.com/facebook/rocksdb/pull/2424
Differential Revision: D5322178
Pulled By: sdwilsh
fbshipit-source-id: 253b0a9c2c498cc98f580df7f2623cbf7678a27f
