postgres/src/backend/access/common/heaptuple.c

/*-------------------------------------------------------------------------
 *
 * heaptuple.c
 *	  This file contains heap tuple accessor and mutator routines, as well
 *	  as various tuple utilities.
 *
 * Some notes about varlenas and this code:
 *
 * Before Postgres 8.3 varlenas always had a 4-byte length header, and
 * therefore always needed 4-byte alignment (at least).  This wasted space
 * for short varlenas, for example CHAR(1) took 5 bytes and could need up to
 * 3 additional padding bytes for alignment.
 *
 * Now, a short varlena (up to 126 data bytes) is reduced to a 1-byte header
 * and we don't align it.  To hide this from datatype-specific functions that
 * don't want to deal with it, such a datum is considered "toasted" and will
 * be expanded back to the normal 4-byte-header format by pg_detoast_datum.
 * (In performance-critical code paths we can use pg_detoast_datum_packed
 * and the appropriate access macros to avoid that overhead.)  Note that this
 * conversion is performed directly in heap_form_tuple, without invoking
 * tuptoaster.c.
 *
 * This change will break any code that assumes it needn't detoast values
 * that have been put into a tuple but never sent to disk.  Hopefully there
 * are few such places.
 *
 * Varlenas still have alignment 'i' (or 'd') in pg_type/pg_attribute, since
 * that's the normal requirement for the untoasted format.  But we ignore that
 * for the 1-byte-header format.  This means that the actual start position
 * of a varlena datum may vary depending on which format it has.  To determine
 * what is stored, we have to require that alignment padding bytes be zero.
 * (Postgres actually has always zeroed them, but now it's required!)  Since
 * the first byte of a 1-byte-header varlena can never be zero, we can examine
 * the first byte after the previous datum to tell if it's a pad byte or the
 * start of a 1-byte-header varlena.
 *
 * Note that while formerly we could rely on the first varlena column of a
 * system catalog to be at the offset suggested by the C struct for the
 * catalog, this is now risky: it's only safe if the preceding field is
 * word-aligned, so that there will never be any padding.
 *
 * We don't pack varlenas whose attstorage is 'p', since the data type
 * isn't expecting to have to detoast values.  This is used in particular
 * by oidvector and int2vector, which are used in the system catalogs
 * and we'd like to still refer to them via C struct offsets.
 *
 *
 * Portions Copyright (c) 1996-2016, PostgreSQL Global Development Group
 * Portions Copyright (c) 1994, Regents of the University of California
 *
 *
 * IDENTIFICATION
 *	  src/backend/access/common/heaptuple.c
 *
 *-------------------------------------------------------------------------
 */

#include "postgres.h"

#include "access/sysattr.h"
#include "access/tuptoaster.h"
#include "executor/tuptable.h"
#include "utils/expandeddatum.h"


/* Does att's datatype allow packing into the 1-byte-header varlena format? */
#define ATT_IS_PACKABLE(att) \
	((att)->attlen == -1 && (att)->attstorage != 'p')
/* Use this if it's already known varlena */
#define VARLENA_ATT_IS_PACKABLE(att) \
	((att)->attstorage != 'p')


/* ----------------------------------------------------------------
 *						misc support routines
 * ----------------------------------------------------------------
 */


/*
 * heap_compute_data_size
 *		Determine size of the data area of a tuple to be constructed
 */
Size
heap_compute_data_size(TupleDesc tupleDesc,
					   Datum *values,
					   bool *isnull)
{
	Size		data_length = 0;
	int			i;
	int			numberOfAttributes = tupleDesc->natts;
	Form_pg_attribute *att = tupleDesc->attrs;

	for (i = 0; i < numberOfAttributes; i++)
	{
		Datum		val;
		Form_pg_attribute atti;

		if (isnull[i])
			continue;

		val = values[i];
		atti = att[i];

		if (ATT_IS_PACKABLE(atti) &&
			VARATT_CAN_MAKE_SHORT(DatumGetPointer(val)))
		{
			/*
			 * we're anticipating converting to a short varlena header, so
			 * adjust length and don't count any alignment
			 */
			data_length += VARATT_CONVERTED_SHORT_SIZE(DatumGetPointer(val));
		}
		else if (atti->attlen == -1 &&
				 VARATT_IS_EXTERNAL_EXPANDED(DatumGetPointer(val)))
		{
			/*
			 * we want to flatten the expanded value so that the constructed
			 * tuple doesn't depend on it
			 */
			data_length = att_align_nominal(data_length, atti->attalign);
			data_length += EOH_get_flat_size(DatumGetEOHP(val));
		}
		else
		{
			data_length = att_align_datum(data_length, atti->attalign,
										  atti->attlen, val);
			data_length = att_addlength_datum(data_length, atti->attlen,
											  val);
		}
	}

	return data_length;
}

/*
 * heap_fill_tuple
 *		Load data portion of a tuple from values/isnull arrays
 *
 * We also fill the null bitmap (if any) and set the infomask bits
 * that reflect the tuple's data contents.
 *
 * NOTE: it is now REQUIRED that the caller have pre-zeroed the data area.
 */
void
heap_fill_tuple(TupleDesc tupleDesc,
				Datum *values, bool *isnull,
				char *data, Size data_size,
				uint16 *infomask, bits8 *bit)
{
	bits8	   *bitP;
	int			bitmask;
	int			i;
	int			numberOfAttributes = tupleDesc->natts;
	Form_pg_attribute *att = tupleDesc->attrs;

#ifdef USE_ASSERT_CHECKING
	char	   *start = data;
#endif

	if (bit != NULL)
	{
		bitP = &bit[-1];
		bitmask = HIGHBIT;
	}
	else
	{
		/* just to keep compiler quiet */
		bitP = NULL;
		bitmask = 0;
	}

	*infomask &= ~(HEAP_HASNULL | HEAP_HASVARWIDTH | HEAP_HASEXTERNAL);

	for (i = 0; i < numberOfAttributes; i++)
	{
		Size		data_length;

		if (bit != NULL)
		{
			if (bitmask != HIGHBIT)
				bitmask <<= 1;
			else
			{
				bitP += 1;
				*bitP = 0x0;
				bitmask = 1;
			}

			if (isnull[i])
			{
				*infomask |= HEAP_HASNULL;
				continue;
			}

			*bitP |= bitmask;
		}

		/*
		 * XXX we use the att_align macros on the pointer value itself, not on
		 * an offset.  This is a bit of a hack.
		 */

		if (att[i]->attbyval)
		{
			/* pass-by-value */
			data = (char *) att_align_nominal(data, att[i]->attalign);
			store_att_byval(data, values[i], att[i]->attlen);
			data_length = att[i]->attlen;
		}
		else if (att[i]->attlen == -1)
		{
			/* varlena */
			Pointer		val = DatumGetPointer(values[i]);

			*infomask |= HEAP_HASVARWIDTH;
			if (VARATT_IS_EXTERNAL(val))
			{
				if (VARATT_IS_EXTERNAL_EXPANDED(val))
				{
					/*
					 * we want to flatten the expanded value so that the
					 * constructed tuple doesn't depend on it
					 */
					ExpandedObjectHeader *eoh = DatumGetEOHP(values[i]);

					data = (char *) att_align_nominal(data,
													  att[i]->attalign);
					data_length = EOH_get_flat_size(eoh);
					EOH_flatten_into(eoh, data, data_length);
				}
				else
				{
					*infomask |= HEAP_HASEXTERNAL;
					/* no alignment, since it's short by definition */
					data_length = VARSIZE_EXTERNAL(val);
					memcpy(data, val, data_length);
				}
			}
			else if (VARATT_IS_SHORT(val))
			{
				/* no alignment for short varlenas */
				data_length = VARSIZE_SHORT(val);
				memcpy(data, val, data_length);
			}
			else if (VARLENA_ATT_IS_PACKABLE(att[i]) &&
					 VARATT_CAN_MAKE_SHORT(val))
			{
				/* convert to short varlena -- no alignment */
				data_length = VARATT_CONVERTED_SHORT_SIZE(val);
				SET_VARSIZE_SHORT(data, data_length);
				memcpy(data + 1, VARDATA(val), data_length - 1);
			}
			else
			{
				/* full 4-byte header varlena */
				data = (char *) att_align_nominal(data,
												  att[i]->attalign);
				data_length = VARSIZE(val);
				memcpy(data, val, data_length);
			}
		}
		else if (att[i]->attlen == -2)
		{
			/* cstring ... never needs alignment */
			*infomask |= HEAP_HASVARWIDTH;
			Assert(att[i]->attalign == 'c');
			data_length = strlen(DatumGetCString(values[i])) + 1;
			memcpy(data, DatumGetPointer(values[i]), data_length);
		}
		else
		{
			/* fixed-length pass-by-reference */
			data = (char *) att_align_nominal(data, att[i]->attalign);
			Assert(att[i]->attlen > 0);
			data_length = att[i]->attlen;
			memcpy(data, DatumGetPointer(values[i]), data_length);
		}

		data += data_length;
	}

	Assert((data - start) == data_size);
}


/* ----------------------------------------------------------------
 *						heap tuple interface
 * ----------------------------------------------------------------
 */

/* ----------------
 *		heap_attisnull	- returns TRUE iff tuple attribute is not present
 * ----------------
 */
bool
heap_attisnull(HeapTuple tup, int attnum)
{
	if (attnum > (int) HeapTupleHeaderGetNatts(tup->t_data))
		return true;

	if (attnum > 0)
	{
		if (HeapTupleNoNulls(tup))
			return false;
		return att_isnull(attnum - 1, tup->t_data->t_bits);
	}

	switch (attnum)
	{
		case TableOidAttributeNumber:
		case SelfItemPointerAttributeNumber:
		case ObjectIdAttributeNumber:
		case MinTransactionIdAttributeNumber:
		case MinCommandIdAttributeNumber:
		case MaxTransactionIdAttributeNumber:
		case MaxCommandIdAttributeNumber:
			/* these are never null */
			break;

		default:
			elog(ERROR, "invalid attnum: %d", attnum);
	}

	return false;
}

/* ----------------
 *		nocachegetattr
 *
 *		This only gets called from fastgetattr() macro, in cases where
 *		we can't use a cacheoffset and the value is not null.
 *
 *		This caches attribute offsets in the attribute descriptor.
 *
 *		An alternative way to speed things up would be to cache offsets
 *		with the tuple, but that seems more difficult unless you take
 *		the storage hit of actually putting those offsets into the
 *		tuple you send to disk.  Yuck.
 *
 *		This scheme will be slightly slower than that, but should
 *		perform well for queries which hit large #'s of tuples.  After
 *		you cache the offsets once, examining all the other tuples using
 *		the same attribute descriptor will go much quicker. -cim 5/4/91
 *
 *		NOTE: if you need to change this code, see also heap_deform_tuple.
 *		Also see nocache_index_getattr, which is the same code for index
 *		tuples.
 * ----------------
 */
Datum
nocachegetattr(HeapTuple tuple,
			   int attnum,
			   TupleDesc tupleDesc)
{
	HeapTupleHeader tup = tuple->t_data;
	Form_pg_attribute *att = tupleDesc->attrs;
	char	   *tp;				/* ptr to data part of tuple */
	bits8	   *bp = tup->t_bits;		/* ptr to null bitmap in tuple */
	bool		slow = false;	/* do we have to walk attrs? */
	int			off;			/* current offset within data */

	/* ----------------
	 *	 Three cases:
	 *
	 *	 1: No nulls and no variable-width attributes.
	 *	 2: Has a null or a var-width AFTER att.
	 *	 3: Has nulls or var-widths BEFORE att.
	 * ----------------
	 */

	attnum--;

	if (!HeapTupleNoNulls(tuple))
	{
		/*
		 * there's a null somewhere in the tuple
		 *
		 * check to see if any preceding bits are null...
		 */
		int			byte = attnum >> 3;
		int			finalbit = attnum & 0x07;

		/* check for nulls "before" final bit of last byte */
		if ((~bp[byte]) & ((1 << finalbit) - 1))
			slow = true;
		else
		{
			/* check for nulls in any "earlier" bytes */
			int			i;

			for (i = 0; i < byte; i++)
			{
				if (bp[i] != 0xFF)
				{
					slow = true;
					break;
				}
			}
		}
	}

	tp = (char *) tup + tup->t_hoff;

	if (!slow)
	{
		/*
		 * If we get here, there are no nulls up to and including the target
		 * attribute.  If we have a cached offset, we can use it.
		 */
		if (att[attnum]->attcacheoff >= 0)
		{
			return fetchatt(att[attnum],
							tp + att[attnum]->attcacheoff);
		}

		/*
		 * Otherwise, check for non-fixed-length attrs up to and including
		 * target.  If there aren't any, it's safe to cheaply initialize the
		 * cached offsets for these attrs.
		 */
		if (HeapTupleHasVarWidth(tuple))
		{
			int			j;

			for (j = 0; j <= attnum; j++)
			{
				if (att[j]->attlen <= 0)
				{
					slow = true;
					break;
				}
			}
		}
	}

	if (!slow)
	{
		int			natts = tupleDesc->natts;
		int			j = 1;

		/*
		 * If we get here, we have a tuple with no nulls or var-widths up to
		 * and including the target attribute, so we can use the cached offset
		 * ... only we don't have it yet, or we'd not have got here.  Since
		 * it's cheap to compute offsets for fixed-width columns, we take the
		 * opportunity to initialize the cached offsets for *all* the leading
		 * fixed-width columns, in hope of avoiding future visits to this
		 * routine.
		 */
		att[0]->attcacheoff = 0;

		/* we might have set some offsets in the slow path previously */
		while (j < natts && att[j]->attcacheoff > 0)
			j++;

		off = att[j - 1]->attcacheoff + att[j - 1]->attlen;

		for (; j < natts; j++)
		{
			if (att[j]->attlen <= 0)
				break;

			off = att_align_nominal(off, att[j]->attalign);

			att[j]->attcacheoff = off;

			off += att[j]->attlen;
		}

		Assert(j > attnum);

		off = att[attnum]->attcacheoff;
	}
	else
	{
		bool		usecache = true;
		int			i;

		/*
		 * Now we know that we have to walk the tuple CAREFULLY.  But we still
		 * might be able to cache some offsets for next time.
		 *
		 * Note - This loop is a little tricky.  For each non-null attribute,
		 * we have to first account for alignment padding before the attr,
		 * then advance over the attr based on its length.  Nulls have no
		 * storage and no alignment padding either.  We can use/set
		 * attcacheoff until we reach either a null or a var-width attribute.
		 */
		off = 0;
		for (i = 0;; i++)		/* loop exit is at "break" */
		{
			if (HeapTupleHasNulls(tuple) && att_isnull(i, bp))
			{
				usecache = false;
				continue;		/* this cannot be the target att */
			}

			/* If we know the next offset, we can skip the rest */
			if (usecache && att[i]->attcacheoff >= 0)
				off = att[i]->attcacheoff;
			else if (att[i]->attlen == -1)
			{
				/*
				 * We can only cache the offset for a varlena attribute if the
				 * offset is already suitably aligned, so that there would be
				 * no pad bytes in any case: then the offset will be valid for
				 * either an aligned or unaligned value.
				 */
				if (usecache &&
					off == att_align_nominal(off, att[i]->attalign))
					att[i]->attcacheoff = off;
				else
				{
					off = att_align_pointer(off, att[i]->attalign, -1,
											tp + off);
					usecache = false;
				}
			}
			else
			{
				/* not varlena, so safe to use att_align_nominal */
				off = att_align_nominal(off, att[i]->attalign);

				if (usecache)
					att[i]->attcacheoff = off;
			}

			if (i == attnum)
				break;

			off = att_addlength_pointer(off, att[i]->attlen, tp + off);

			if (usecache && att[i]->attlen <= 0)
				usecache = false;
		}
	}

	return fetchatt(att[attnum], tp + off);
}

/* ----------------
 *		heap_getsysattr
 *
 *		Fetch the value of a system attribute for a tuple.
 *
 * This is a support routine for the heap_getattr macro.  The macro
 * has already determined that the attnum refers to a system attribute.
 * ----------------
 */
Datum
heap_getsysattr(HeapTuple tup, int attnum, TupleDesc tupleDesc, bool *isnull)
{
	Datum		result;

	Assert(tup);

	/* Currently, no sys attribute ever reads as NULL. */
	*isnull = false;

	switch (attnum)
	{
		case SelfItemPointerAttributeNumber:
			/* pass-by-reference datatype */
			result = PointerGetDatum(&(tup->t_self));
			break;
		case ObjectIdAttributeNumber:
			result = ObjectIdGetDatum(HeapTupleGetOid(tup));
			break;
		case MinTransactionIdAttributeNumber:
			result = TransactionIdGetDatum(HeapTupleHeaderGetRawXmin(tup->t_data));
			break;
		case MaxTransactionIdAttributeNumber:
			result = TransactionIdGetDatum(HeapTupleHeaderGetRawXmax(tup->t_data));
			break;
		case MinCommandIdAttributeNumber:
		case MaxCommandIdAttributeNumber:

			/*
			 * cmin and cmax are now both aliases for the same field, which
			 * can in fact also be a combo command id.  XXX perhaps we should
			 * return the "real" cmin or cmax if possible, that is if we are
			 * inside the originating transaction?
			 */
			result = CommandIdGetDatum(HeapTupleHeaderGetRawCommandId(tup->t_data));
			break;
		case TableOidAttributeNumber:
			result = ObjectIdGetDatum(tup->t_tableOid);
			break;
		default:
			elog(ERROR, "invalid attnum: %d", attnum);
			result = 0;			/* keep compiler quiet */
			break;
	}
	return result;
}

/* ----------------
 *		heap_copytuple
 *
 *		returns a copy of an entire tuple
 *
 * The HeapTuple struct, tuple header, and tuple data are all allocated
 * as a single palloc() block.
 * ----------------
 */
HeapTuple
heap_copytuple(HeapTuple tuple)
{
	HeapTuple	newTuple;

	if (!HeapTupleIsValid(tuple) || tuple->t_data == NULL)
		return NULL;

	newTuple = (HeapTuple) palloc(HEAPTUPLESIZE + tuple->t_len);
	newTuple->t_len = tuple->t_len;
	newTuple->t_self = tuple->t_self;
	newTuple->t_tableOid = tuple->t_tableOid;
	newTuple->t_data = (HeapTupleHeader) ((char *) newTuple + HEAPTUPLESIZE);
	memcpy((char *) newTuple->t_data, (char *) tuple->t_data, tuple->t_len);
	return newTuple;
}

/* ----------------
 *		heap_copytuple_with_tuple
 *
 *		copy a tuple into a caller-supplied HeapTuple management struct
 *
 * Note that after calling this function, the "dest" HeapTuple will not be
 * allocated as a single palloc() block (unlike with heap_copytuple()).
 * ----------------
 */
void
heap_copytuple_with_tuple(HeapTuple src, HeapTuple dest)
{
	if (!HeapTupleIsValid(src) || src->t_data == NULL)
	{
		dest->t_data = NULL;
		return;
	}

	dest->t_len = src->t_len;
	dest->t_self = src->t_self;
	dest->t_tableOid = src->t_tableOid;
	dest->t_data = (HeapTupleHeader) palloc(src->t_len);
	memcpy((char *) dest->t_data, (char *) src->t_data, src->t_len);
}

/* ----------------
 *		heap_copy_tuple_as_datum
 *
 *		copy a tuple as a composite-type Datum
 * ----------------
 */
Datum
heap_copy_tuple_as_datum(HeapTuple tuple, TupleDesc tupleDesc)
{
	HeapTupleHeader td;

	/*
	 * If the tuple contains any external TOAST pointers, we have to inline
	 * those fields to meet the conventions for composite-type Datums.
	 */
	if (HeapTupleHasExternal(tuple))
		return toast_flatten_tuple_to_datum(tuple->t_data,
											tuple->t_len,
											tupleDesc);

	/*
	 * Fast path for easy case: just make a palloc'd copy and insert the
	 * correct composite-Datum header fields (since those may not be set if
	 * the given tuple came from disk, rather than from heap_form_tuple).
	 */
	td = (HeapTupleHeader) palloc(tuple->t_len);
	memcpy((char *) td, (char *) tuple->t_data, tuple->t_len);

	HeapTupleHeaderSetDatumLength(td, tuple->t_len);
	HeapTupleHeaderSetTypeId(td, tupleDesc->tdtypeid);
	HeapTupleHeaderSetTypMod(td, tupleDesc->tdtypmod);

	return PointerGetDatum(td);
}

/*
 * heap_form_tuple
 *		construct a tuple from the given values[] and isnull[] arrays,
 *		which are of the length indicated by tupleDescriptor->natts
 *
 * The result is allocated in the current memory context.
 */
HeapTuple
heap_form_tuple(TupleDesc tupleDescriptor,
				Datum *values,
				bool *isnull)
{
	HeapTuple	tuple;			/* return tuple */
	HeapTupleHeader td;			/* tuple data */
	Size		len,
				data_len;
	int			hoff;
	bool		hasnull = false;
	int			numberOfAttributes = tupleDescriptor->natts;
	int			i;

	if (numberOfAttributes > MaxTupleAttributeNumber)
		ereport(ERROR,
				(errcode(ERRCODE_TOO_MANY_COLUMNS),
				 errmsg("number of columns (%d) exceeds limit (%d)",
						numberOfAttributes, MaxTupleAttributeNumber)));

	/*
	 * Check for nulls
	 */
	for (i = 0; i < numberOfAttributes; i++)
	{
		if (isnull[i])
		{
			hasnull = true;
			break;
		}
	}

	/*
	 * Determine total space needed
	 */
	len = offsetof(HeapTupleHeaderData, t_bits);

	if (hasnull)
		len += BITMAPLEN(numberOfAttributes);

	if (tupleDescriptor->tdhasoid)
		len += sizeof(Oid);

	hoff = len = MAXALIGN(len); /* align user data safely */

	data_len = heap_compute_data_size(tupleDescriptor, values, isnull);

	len += data_len;

	/*
	 * Allocate and zero the space needed.  Note that the tuple body and
	 * HeapTupleData management structure are allocated in one chunk.
	 */
	tuple = MemoryContextAllocExtended(CurrentMemoryContext,
									   HEAPTUPLESIZE + len,
									   MCXT_ALLOC_HUGE | MCXT_ALLOC_ZERO);
	tuple->t_data = td = (HeapTupleHeader) ((char *) tuple + HEAPTUPLESIZE);

	/*
	 * And fill in the information.  Note we fill the Datum fields even though
	 * this tuple may never become a Datum.  This lets HeapTupleHeaderGetDatum
	 * identify the tuple type if needed.
	 */
	tuple->t_len = len;
	ItemPointerSetInvalid(&(tuple->t_self));
	tuple->t_tableOid = InvalidOid;

	HeapTupleHeaderSetDatumLength(td, len);
	HeapTupleHeaderSetTypeId(td, tupleDescriptor->tdtypeid);
	HeapTupleHeaderSetTypMod(td, tupleDescriptor->tdtypmod);
	/* We also make sure that t_ctid is invalid unless explicitly set */
	ItemPointerSetInvalid(&(td->t_ctid));

	HeapTupleHeaderSetNatts(td, numberOfAttributes);
	td->t_hoff = hoff;

	if (tupleDescriptor->tdhasoid)		/* else leave infomask = 0 */
		td->t_infomask = HEAP_HASOID;

	heap_fill_tuple(tupleDescriptor,
					values,
					isnull,
					(char *) td + hoff,
					data_len,
					&td->t_infomask,
					(hasnull ? td->t_bits : NULL));

	return tuple;
}

/*
 * heap_modify_tuple
 *		form a new tuple from an old tuple and a set of replacement values.
 *
 * The replValues, replIsnull, and doReplace arrays must be of the length
 * indicated by tupleDesc->natts.  The new tuple is constructed using the data
 * from replValues/replIsnull at columns where doReplace is true, and using
 * the data from the old tuple at columns where doReplace is false.
 *
 * The result is allocated in the current memory context.
 */
HeapTuple
heap_modify_tuple(HeapTuple tuple,
				  TupleDesc tupleDesc,
				  Datum *replValues,
				  bool *replIsnull,
				  bool *doReplace)
{
	int			numberOfAttributes = tupleDesc->natts;
	int			attoff;
	Datum	   *values;
	bool	   *isnull;
	HeapTuple	newTuple;

	/*
	 * allocate and fill values and isnull arrays from either the tuple or the
	 * repl information, as appropriate.
	 *
	 * NOTE: it's debatable whether to use heap_deform_tuple() here or just
	 * heap_getattr() only the non-replaced columns.  The latter could win if
	 * there are many replaced columns and few non-replaced ones. However,
	 * heap_deform_tuple costs only O(N) while the heap_getattr way would cost
	 * O(N^2) if there are many non-replaced columns, so it seems better to
	 * err on the side of linear cost.
	 */
	values = (Datum *) palloc(numberOfAttributes * sizeof(Datum));
	isnull = (bool *) palloc(numberOfAttributes * sizeof(bool));

	heap_deform_tuple(tuple, tupleDesc, values, isnull);

	for (attoff = 0; attoff < numberOfAttributes; attoff++)
	{
		if (doReplace[attoff])
		{
			values[attoff] = replValues[attoff];
			isnull[attoff] = replIsnull[attoff];
		}
	}

	/*
	 * create a new tuple from the values and isnull arrays
	 */
	newTuple = heap_form_tuple(tupleDesc, values, isnull);

	pfree(values);
	pfree(isnull);

	/*
	 * copy the identification info of the old tuple: t_ctid, t_self, and OID
	 * (if any)
	 */
	newTuple->t_data->t_ctid = tuple->t_data->t_ctid;
	newTuple->t_self = tuple->t_self;
	newTuple->t_tableOid = tuple->t_tableOid;
	if (tupleDesc->tdhasoid)
		HeapTupleSetOid(newTuple, HeapTupleGetOid(tuple));

	return newTuple;
}

/*
 * heap_modify_tuple_by_cols
 *		form a new tuple from an old tuple and a set of replacement values.
 *
 * This is like heap_modify_tuple, except that instead of specifying which
 * column(s) to replace by a boolean map, an array of target column numbers
 * is used.  This is often more convenient when a fixed number of columns
 * are to be replaced.  The replCols, replValues, and replIsnull arrays must
 * be of length nCols.  Target column numbers are indexed from 1.
 *
 * The result is allocated in the current memory context.
 */
HeapTuple
heap_modify_tuple_by_cols(HeapTuple tuple,
						  TupleDesc tupleDesc,
						  int nCols,
						  int *replCols,
						  Datum *replValues,
						  bool *replIsnull)
{
	int			numberOfAttributes = tupleDesc->natts;
	Datum	   *values;
	bool	   *isnull;
	HeapTuple	newTuple;
	int			i;

	/*
	 * allocate and fill values and isnull arrays from the tuple, then replace
	 * selected columns from the input arrays.
	 */
	values = (Datum *) palloc(numberOfAttributes * sizeof(Datum));
	isnull = (bool *) palloc(numberOfAttributes * sizeof(bool));

	heap_deform_tuple(tuple, tupleDesc, values, isnull);

	for (i = 0; i < nCols; i++)
	{
		int			attnum = replCols[i];

		if (attnum <= 0 || attnum > numberOfAttributes)
			elog(ERROR, "invalid column number %d", attnum);
		values[attnum - 1] = replValues[i];
		isnull[attnum - 1] = replIsnull[i];
	}

	/*
	 * create a new tuple from the values and isnull arrays
	 */
	newTuple = heap_form_tuple(tupleDesc, values, isnull);

	pfree(values);
	pfree(isnull);

	/*
	 * copy the identification info of the old tuple: t_ctid, t_self, and OID
	 * (if any)
	 */
	newTuple->t_data->t_ctid = tuple->t_data->t_ctid;
	newTuple->t_self = tuple->t_self;
	newTuple->t_tableOid = tuple->t_tableOid;
	if (tupleDesc->tdhasoid)
		HeapTupleSetOid(newTuple, HeapTupleGetOid(tuple));

	return newTuple;
}

/*
 * heap_deform_tuple
 *		Given a tuple, extract data into values/isnull arrays; this is
 *		the inverse of heap_form_tuple.
 *
 *		Storage for the values/isnull arrays is provided by the caller;
 *		it should be sized according to tupleDesc->natts not
 *		HeapTupleHeaderGetNatts(tuple->t_data).
 *
 *		Note that for pass-by-reference datatypes, the pointer placed
 *		in the Datum will point into the given tuple.
 *
 *		When all or most of a tuple's fields need to be extracted,
 *		this routine will be significantly quicker than a loop around
 *		heap_getattr; the loop will become O(N^2) as soon as any
 *		noncacheable attribute offsets are involved.
 */
void
heap_deform_tuple(HeapTuple tuple, TupleDesc tupleDesc,
				  Datum *values, bool *isnull)
{
	HeapTupleHeader tup = tuple->t_data;
	bool		hasnulls = HeapTupleHasNulls(tuple);
	Form_pg_attribute *att = tupleDesc->attrs;
	int			tdesc_natts = tupleDesc->natts;
	int			natts;			/* number of atts to extract */
	int			attnum;
	char	   *tp;				/* ptr to tuple data */
	long		off;			/* offset in tuple data */
	bits8	   *bp = tup->t_bits;		/* ptr to null bitmap in tuple */
	bool		slow = false;	/* can we use/set attcacheoff? */

	natts = HeapTupleHeaderGetNatts(tup);

	/*
	 * In inheritance situations, it is possible that the given tuple actually
	 * has more fields than the caller is expecting.  Don't run off the end of
	 * the caller's arrays.
	 */
	natts = Min(natts, tdesc_natts);

	tp = (char *) tup + tup->t_hoff;

	off = 0;

	for (attnum = 0; attnum < natts; attnum++)
	{
		Form_pg_attribute thisatt = att[attnum];

		if (hasnulls && att_isnull(attnum, bp))
		{
			values[attnum] = (Datum) 0;
			isnull[attnum] = true;
			slow = true;		/* can't use attcacheoff anymore */
			continue;
		}

		isnull[attnum] = false;

		if (!slow && thisatt->attcacheoff >= 0)
			off = thisatt->attcacheoff;
		else if (thisatt->attlen == -1)
		{
			/*
			 * We can only cache the offset for a varlena attribute if the
			 * offset is already suitably aligned, so that there would be no
			 * pad bytes in any case: then the offset will be valid for either
			 * an aligned or unaligned value.
			 */
			if (!slow &&
				off == att_align_nominal(off, thisatt->attalign))
				thisatt->attcacheoff = off;
			else
			{
				off = att_align_pointer(off, thisatt->attalign, -1,
										tp + off);
				slow = true;
			}
		}
		else
		{
			/* not varlena, so safe to use att_align_nominal */
			off = att_align_nominal(off, thisatt->attalign);

			if (!slow)
				thisatt->attcacheoff = off;
		}

		values[attnum] = fetchatt(thisatt, tp + off);

		off = att_addlength_pointer(off, thisatt->attlen, tp + off);

		if (thisatt->attlen <= 0)
			slow = true;		/* can't use attcacheoff anymore */
	}

	/*
	 * If tuple doesn't have all the atts indicated by tupleDesc, read the
	 * rest as null
	 */
	for (; attnum < tdesc_natts; attnum++)
	{
		values[attnum] = (Datum) 0;
		isnull[attnum] = true;
	}
}

/*
 * slot_deform_tuple
 *		Given a TupleTableSlot, extract data from the slot's physical tuple
 *		into its Datum/isnull arrays.  Data is extracted up through the
 *		natts'th column (caller must ensure this is a legal column number).
 *
 *		This is essentially an incremental version of heap_deform_tuple:
 *		on each call we extract attributes up to the one needed, without
 *		re-computing information about previously extracted attributes.
 *		slot->tts_nvalid is the number of attributes already extracted.
 */
static void
slot_deform_tuple(TupleTableSlot *slot, int natts)
{
	HeapTuple	tuple = slot->tts_tuple;
	TupleDesc	tupleDesc = slot->tts_tupleDescriptor;
	Datum	   *values = slot->tts_values;
	bool	   *isnull = slot->tts_isnull;
	HeapTupleHeader tup = tuple->t_data;
	bool		hasnulls = HeapTupleHasNulls(tuple);
	Form_pg_attribute *att = tupleDesc->attrs;
	int			attnum;
	char	   *tp;				/* ptr to tuple data */
	long		off;			/* offset in tuple data */
	bits8	   *bp = tup->t_bits;		/* ptr to null bitmap in tuple */
	bool		slow;			/* can we use/set attcacheoff? */

	/*
	 * Check whether the first call for this tuple, and initialize or restore
	 * loop state.
	 */
	attnum = slot->tts_nvalid;
	if (attnum == 0)
	{
		/* Start from the first attribute */
		off = 0;
		slow = false;
	}
	else
	{
		/* Restore state from previous execution */
		off = slot->tts_off;
		slow = slot->tts_slow;
	}

	tp = (char *) tup + tup->t_hoff;

	for (; attnum < natts; attnum++)
	{
		Form_pg_attribute thisatt = att[attnum];

		if (hasnulls && att_isnull(attnum, bp))
		{
			values[attnum] = (Datum) 0;
			isnull[attnum] = true;
			slow = true;		/* can't use attcacheoff anymore */
			continue;
		}

		isnull[attnum] = false;

		if (!slow && thisatt->attcacheoff >= 0)
			off = thisatt->attcacheoff;
		else if (thisatt->attlen == -1)
		{
			/*
			 * We can only cache the offset for a varlena attribute if the
			 * offset is already suitably aligned, so that there would be no
			 * pad bytes in any case: then the offset will be valid for either
			 * an aligned or unaligned value.
			 */
			if (!slow &&
				off == att_align_nominal(off, thisatt->attalign))
				thisatt->attcacheoff = off;
			else
			{
				off = att_align_pointer(off, thisatt->attalign, -1,
										tp + off);
				slow = true;
			}
		}
		else
		{
			/* not varlena, so safe to use att_align_nominal */
			off = att_align_nominal(off, thisatt->attalign);

			if (!slow)
				thisatt->attcacheoff = off;
		}

		values[attnum] = fetchatt(thisatt, tp + off);

		off = att_addlength_pointer(off, thisatt->attlen, tp + off);

		if (thisatt->attlen <= 0)
			slow = true;		/* can't use attcacheoff anymore */
	}

	/*
	 * Save state for next execution
	 */
	slot->tts_nvalid = attnum;
	slot->tts_off = off;
	slot->tts_slow = slow;
}

/*
 * slot_getattr
 *		This function fetches an attribute of the slot's current tuple.
 *		It is functionally equivalent to heap_getattr, but fetches of
 *		multiple attributes of the same tuple will be optimized better,
 *		because we avoid O(N^2) behavior from multiple calls of
 *		nocachegetattr(), even when attcacheoff isn't usable.
 *
 *		A difference from raw heap_getattr is that attnums beyond the
 *		slot's tupdesc's last attribute will be considered NULL even
 *		when the physical tuple is longer than the tupdesc.
 */
Datum
slot_getattr(TupleTableSlot *slot, int attnum, bool *isnull)
{
	HeapTuple	tuple = slot->tts_tuple;
	TupleDesc	tupleDesc = slot->tts_tupleDescriptor;
	HeapTupleHeader tup;

	/*
	 * system attributes are handled by heap_getsysattr
	 */
	if (attnum <= 0)
	{
		if (tuple == NULL)		/* internal error */
			elog(ERROR, "cannot extract system attribute from virtual tuple");
		if (tuple == &(slot->tts_minhdr))		/* internal error */
			elog(ERROR, "cannot extract system attribute from minimal tuple");
		return heap_getsysattr(tuple, attnum, tupleDesc, isnull);
	}

	/*
	 * fast path if desired attribute already cached
	 */
	if (attnum <= slot->tts_nvalid)
	{
		*isnull = slot->tts_isnull[attnum - 1];
		return slot->tts_values[attnum - 1];
	}

	/*
	 * return NULL if attnum is out of range according to the tupdesc
	 */
	if (attnum > tupleDesc->natts)
	{
		*isnull = true;
		return (Datum) 0;
	}

	/*
	 * otherwise we had better have a physical tuple (tts_nvalid should equal
	 * natts in all virtual-tuple cases)
	 */
	if (tuple == NULL)			/* internal error */
		elog(ERROR, "cannot extract attribute from empty tuple slot");

	/*
	 * return NULL if attnum is out of range according to the tuple
	 *
	 * (We have to check this separately because of various inheritance and
	 * table-alteration scenarios: the tuple could be either longer or shorter
	 * than the tupdesc.)
	 */
	tup = tuple->t_data;
	if (attnum > HeapTupleHeaderGetNatts(tup))
	{
		*isnull = true;
		return (Datum) 0;
	}

	/*
	 * check if target attribute is null: no point in groveling through tuple
	 */
	if (HeapTupleHasNulls(tuple) && att_isnull(attnum - 1, tup->t_bits))
	{
		*isnull = true;
		return (Datum) 0;
	}

	/*
	 * If the attribute's column has been dropped, we force a NULL result.
	 * This case should not happen in normal use, but it could happen if we
	 * are executing a plan cached before the column was dropped.
	 */
	if (tupleDesc->attrs[attnum - 1]->attisdropped)
	{
		*isnull = true;
		return (Datum) 0;
	}

	/*
	 * Extract the attribute, along with any preceding attributes.
	 */
	slot_deform_tuple(slot, attnum);

	/*
	 * The result is acquired from tts_values array.
	 */
	*isnull = slot->tts_isnull[attnum - 1];
	return slot->tts_values[attnum - 1];
}

/*
 * slot_getallattrs
 *		This function forces all the entries of the slot's Datum/isnull
 *		arrays to be valid.  The caller may then extract data directly
 *		from those arrays instead of using slot_getattr.
 */
void
slot_getallattrs(TupleTableSlot *slot)
{
	int			tdesc_natts = slot->tts_tupleDescriptor->natts;
	int			attnum;
	HeapTuple	tuple;

	/* Quick out if we have 'em all already */
	if (slot->tts_nvalid == tdesc_natts)
		return;

	/*
	 * otherwise we had better have a physical tuple (tts_nvalid should equal
	 * natts in all virtual-tuple cases)
	 */
	tuple = slot->tts_tuple;
	if (tuple == NULL)			/* internal error */
		elog(ERROR, "cannot extract attribute from empty tuple slot");

	/*
	 * load up any slots available from physical tuple
	 */
	attnum = HeapTupleHeaderGetNatts(tuple->t_data);
	attnum = Min(attnum, tdesc_natts);

	slot_deform_tuple(slot, attnum);

	/*
	 * If tuple doesn't have all the atts indicated by tupleDesc, read the
	 * rest as null
	 */
	for (; attnum < tdesc_natts; attnum++)
	{
		slot->tts_values[attnum] = (Datum) 0;
		slot->tts_isnull[attnum] = true;
	}
	slot->tts_nvalid = tdesc_natts;
}

/*
 * slot_getsomeattrs
 *		This function forces the entries of the slot's Datum/isnull
 *		arrays to be valid at least up through the attnum'th entry.
 */
void
slot_getsomeattrs(TupleTableSlot *slot, int attnum)
{
	HeapTuple	tuple;
	int			attno;

	/* Quick out if we have 'em all already */
	if (slot->tts_nvalid >= attnum)
		return;

	/* Check for caller error */
	if (attnum <= 0 || attnum > slot->tts_tupleDescriptor->natts)
		elog(ERROR, "invalid attribute number %d", attnum);

	/*
	 * otherwise we had better have a physical tuple (tts_nvalid should equal
	 * natts in all virtual-tuple cases)
	 */
	tuple = slot->tts_tuple;
	if (tuple == NULL)			/* internal error */
		elog(ERROR, "cannot extract attribute from empty tuple slot");

	/*
	 * load up any slots available from physical tuple
	 */
	attno = HeapTupleHeaderGetNatts(tuple->t_data);
	attno = Min(attno, attnum);

	slot_deform_tuple(slot, attno);

	/*
	 * If tuple doesn't have all the atts indicated by tupleDesc, read the
	 * rest as null
	 */
	for (; attno < attnum; attno++)
	{
		slot->tts_values[attno] = (Datum) 0;
		slot->tts_isnull[attno] = true;
	}
	slot->tts_nvalid = attnum;
}

/*
 * slot_attisnull
 *		Detect whether an attribute of the slot is null, without
 *		actually fetching it.
 */
bool
slot_attisnull(TupleTableSlot *slot, int attnum)
{
	HeapTuple	tuple = slot->tts_tuple;
	TupleDesc	tupleDesc = slot->tts_tupleDescriptor;

	/*
	 * system attributes are handled by heap_attisnull
	 */
	if (attnum <= 0)
	{
		if (tuple == NULL)		/* internal error */
			elog(ERROR, "cannot extract system attribute from virtual tuple");
		if (tuple == &(slot->tts_minhdr))		/* internal error */
			elog(ERROR, "cannot extract system attribute from minimal tuple");
		return heap_attisnull(tuple, attnum);
	}

	/*
	 * fast path if desired attribute already cached
	 */
	if (attnum <= slot->tts_nvalid)
		return slot->tts_isnull[attnum - 1];

	/*
	 * return NULL if attnum is out of range according to the tupdesc
	 */
	if (attnum > tupleDesc->natts)
		return true;

	/*
	 * otherwise we had better have a physical tuple (tts_nvalid should equal
	 * natts in all virtual-tuple cases)
	 */
	if (tuple == NULL)			/* internal error */
		elog(ERROR, "cannot extract attribute from empty tuple slot");

	/* and let the tuple tell it */
	return heap_attisnull(tuple, attnum);
}

/*
 * heap_freetuple
 */
void
heap_freetuple(HeapTuple htup)
{
	pfree(htup);
}


/*
 * heap_form_minimal_tuple
 *		construct a MinimalTuple from the given values[] and isnull[] arrays,
 *		which are of the length indicated by tupleDescriptor->natts
 *
 * This is exactly like heap_form_tuple() except that the result is a
 * "minimal" tuple lacking a HeapTupleData header as well as room for system
 * columns.
 *
 * The result is allocated in the current memory context.
 */
MinimalTuple
heap_form_minimal_tuple(TupleDesc tupleDescriptor,
						Datum *values,
						bool *isnull)
{
	MinimalTuple tuple;			/* return tuple */
	Size		len,
				data_len;
	int			hoff;
	bool		hasnull = false;
	int			numberOfAttributes = tupleDescriptor->natts;
	int			i;

	if (numberOfAttributes > MaxTupleAttributeNumber)
		ereport(ERROR,
				(errcode(ERRCODE_TOO_MANY_COLUMNS),
				 errmsg("number of columns (%d) exceeds limit (%d)",
						numberOfAttributes, MaxTupleAttributeNumber)));

	/*
	 * Check for nulls
	 */
	for (i = 0; i < numberOfAttributes; i++)
	{
		if (isnull[i])
		{
			hasnull = true;
			break;
		}
	}

	/*
	 * Determine total space needed
	 */
	len = SizeofMinimalTupleHeader;

	if (hasnull)
		len += BITMAPLEN(numberOfAttributes);

	if (tupleDescriptor->tdhasoid)
		len += sizeof(Oid);

	hoff = len = MAXALIGN(len); /* align user data safely */

	data_len = heap_compute_data_size(tupleDescriptor, values, isnull);

	len += data_len;

	/*
	 * Allocate and zero the space needed.
	 */
	tuple = (MinimalTuple) palloc0(len);

	/*
	 * And fill in the information.
	 */
	tuple->t_len = len;
	HeapTupleHeaderSetNatts(tuple, numberOfAttributes);
	tuple->t_hoff = hoff + MINIMAL_TUPLE_OFFSET;

	if (tupleDescriptor->tdhasoid)		/* else leave infomask = 0 */
		tuple->t_infomask = HEAP_HASOID;

	heap_fill_tuple(tupleDescriptor,
					values,
					isnull,
					(char *) tuple + hoff,
					data_len,
					&tuple->t_infomask,
					(hasnull ? tuple->t_bits : NULL));

	return tuple;
}

/*
 * heap_free_minimal_tuple
 */
void
heap_free_minimal_tuple(MinimalTuple mtup)
{
	pfree(mtup);
}

/*
 * heap_copy_minimal_tuple
 *		copy a MinimalTuple
 *
 * The result is allocated in the current memory context.
 */
MinimalTuple
heap_copy_minimal_tuple(MinimalTuple mtup)
{
	MinimalTuple result;

	result = (MinimalTuple) palloc(mtup->t_len);
	memcpy(result, mtup, mtup->t_len);
	return result;
}

/*
 * heap_tuple_from_minimal_tuple
 *		create a HeapTuple by copying from a MinimalTuple;
 *		system columns are filled with zeroes
 *
 * The result is allocated in the current memory context.
 * The HeapTuple struct, tuple header, and tuple data are all allocated
 * as a single palloc() block.
 */
HeapTuple
heap_tuple_from_minimal_tuple(MinimalTuple mtup)
{
	HeapTuple	result;
	uint32		len = mtup->t_len + MINIMAL_TUPLE_OFFSET;

	result = (HeapTuple) palloc(HEAPTUPLESIZE + len);
	result->t_len = len;
	ItemPointerSetInvalid(&(result->t_self));
	result->t_tableOid = InvalidOid;
	result->t_data = (HeapTupleHeader) ((char *) result + HEAPTUPLESIZE);
	memcpy((char *) result->t_data + MINIMAL_TUPLE_OFFSET, mtup, mtup->t_len);
	memset(result->t_data, 0, offsetof(HeapTupleHeaderData, t_infomask2));
	return result;
}

/*
 * minimal_tuple_from_heap_tuple
 *		create a MinimalTuple by copying from a HeapTuple
 *
 * The result is allocated in the current memory context.
 */
MinimalTuple
minimal_tuple_from_heap_tuple(HeapTuple htup)
{
	MinimalTuple result;
	uint32		len;

	Assert(htup->t_len > MINIMAL_TUPLE_OFFSET);
	len = htup->t_len - MINIMAL_TUPLE_OFFSET;
	result = (MinimalTuple) palloc(len);
	memcpy(result, (char *) htup->t_data + MINIMAL_TUPLE_OFFSET, len);
	result->t_len = len;
	return result;
}