postgres/src/backend/executor/nodeIndexonlyscan.c

/*-------------------------------------------------------------------------
 *
 * nodeIndexonlyscan.c
 *	  Routines to support index-only scans
 *
 * Portions Copyright (c) 1996-2019, PostgreSQL Global Development Group
 * Portions Copyright (c) 1994, Regents of the University of California
 *
 *
 * IDENTIFICATION
 *	  src/backend/executor/nodeIndexonlyscan.c
 *
 *-------------------------------------------------------------------------
 */
/*
 * INTERFACE ROUTINES
 *		ExecIndexOnlyScan			scans an index
 *		IndexOnlyNext				retrieve next tuple
 *		ExecInitIndexOnlyScan		creates and initializes state info.
 *		ExecReScanIndexOnlyScan		rescans the indexed relation.
 *		ExecEndIndexOnlyScan		releases all storage.
 *		ExecIndexOnlyMarkPos		marks scan position.
 *		ExecIndexOnlyRestrPos		restores scan position.
 *		ExecIndexOnlyScanEstimate	estimates DSM space needed for
 *						parallel index-only scan
 *		ExecIndexOnlyScanInitializeDSM	initialize DSM for parallel
 *						index-only scan
 *		ExecIndexOnlyScanReInitializeDSM	reinitialize DSM for fresh scan
 *		ExecIndexOnlyScanInitializeWorker attach to DSM info in parallel worker
 */
#include "postgres.h"

#include "access/genam.h"
#include "access/relscan.h"
#include "access/tableam.h"
#include "access/tupdesc.h"
#include "access/visibilitymap.h"
#include "executor/execdebug.h"
#include "executor/nodeIndexonlyscan.h"
#include "executor/nodeIndexscan.h"
#include "miscadmin.h"
#include "storage/bufmgr.h"
#include "storage/predicate.h"
#include "utils/memutils.h"
#include "utils/rel.h"


static TupleTableSlot *IndexOnlyNext(IndexOnlyScanState *node);
static void StoreIndexTuple(TupleTableSlot *slot, IndexTuple itup,
							TupleDesc itupdesc);


/* ----------------------------------------------------------------
 *		IndexOnlyNext
 *
 *		Retrieve a tuple from the IndexOnlyScan node's index.
 * ----------------------------------------------------------------
 */
static TupleTableSlot *
IndexOnlyNext(IndexOnlyScanState *node)
{
	EState	   *estate;
	ExprContext *econtext;
	ScanDirection direction;
	IndexScanDesc scandesc;
	TupleTableSlot *slot;
	ItemPointer tid;

	/*
	 * extract necessary information from index scan node
	 */
	estate = node->ss.ps.state;
	direction = estate->es_direction;
	/* flip direction if this is an overall backward scan */
	if (ScanDirectionIsBackward(((IndexOnlyScan *) node->ss.ps.plan)->indexorderdir))
	{
		if (ScanDirectionIsForward(direction))
			direction = BackwardScanDirection;
		else if (ScanDirectionIsBackward(direction))
			direction = ForwardScanDirection;
	}
	scandesc = node->ioss_ScanDesc;
	econtext = node->ss.ps.ps_ExprContext;
	slot = node->ss.ss_ScanTupleSlot;

	if (scandesc == NULL)
	{
		/*
		 * We reach here if the index only scan is not parallel, or if we're
		 * serially executing an index only scan that was planned to be
		 * parallel.
		 */
		scandesc = index_beginscan(node->ss.ss_currentRelation,
								   node->ioss_RelationDesc,
								   estate->es_snapshot,
								   node->ioss_NumScanKeys,
								   node->ioss_NumOrderByKeys);

		node->ioss_ScanDesc = scandesc;


		/* Set it up for index-only scan */
		node->ioss_ScanDesc->xs_want_itup = true;
		node->ioss_VMBuffer = InvalidBuffer;

		/*
		 * If no run-time keys to calculate or they are ready, go ahead and
		 * pass the scankeys to the index AM.
		 */
		if (node->ioss_NumRuntimeKeys == 0 || node->ioss_RuntimeKeysReady)
			index_rescan(scandesc,
						 node->ioss_ScanKeys,
						 node->ioss_NumScanKeys,
						 node->ioss_OrderByKeys,
						 node->ioss_NumOrderByKeys);
	}

	/*
	 * OK, now that we have what we need, fetch the next tuple.
	 */
	while ((tid = index_getnext_tid(scandesc, direction)) != NULL)
	{
		bool		tuple_from_heap = false;

		CHECK_FOR_INTERRUPTS();

		/*
		 * We can skip the heap fetch if the TID references a heap page on
		 * which all tuples are known visible to everybody.  In any case,
		 * we'll use the index tuple not the heap tuple as the data source.
		 *
		 * Note on Memory Ordering Effects: visibilitymap_get_status does not
		 * lock the visibility map buffer, and therefore the result we read
		 * here could be slightly stale.  However, it can't be stale enough to
		 * matter.
		 *
		 * We need to detect clearing a VM bit due to an insert right away,
		 * because the tuple is present in the index page but not visible. The
		 * reading of the TID by this scan (using a shared lock on the index
		 * buffer) is serialized with the insert of the TID into the index
		 * (using an exclusive lock on the index buffer). Because the VM bit
		 * is cleared before updating the index, and locking/unlocking of the
		 * index page acts as a full memory barrier, we are sure to see the
		 * cleared bit if we see a recently-inserted TID.
		 *
		 * Deletes do not update the index page (only VACUUM will clear out
		 * the TID), so the clearing of the VM bit by a delete is not
		 * serialized with this test below, and we may see a value that is
		 * significantly stale. However, we don't care about the delete right
		 * away, because the tuple is still visible until the deleting
		 * transaction commits or the statement ends (if it's our
		 * transaction). In either case, the lock on the VM buffer will have
		 * been released (acting as a write barrier) after clearing the bit.
		 * And for us to have a snapshot that includes the deleting
		 * transaction (making the tuple invisible), we must have acquired
		 * ProcArrayLock after that time, acting as a read barrier.
		 *
		 * It's worth going through this complexity to avoid needing to lock
		 * the VM buffer, which could cause significant contention.
		 */
		if (!VM_ALL_VISIBLE(scandesc->heapRelation,
							ItemPointerGetBlockNumber(tid),
							&node->ioss_VMBuffer))
		{
			/*
			 * Rats, we have to visit the heap to check visibility.
			 */
			InstrCountTuples2(node, 1);
			if (!index_fetch_heap(scandesc, node->ioss_TableSlot))
				continue;		/* no visible tuple, try next index entry */

			ExecClearTuple(node->ioss_TableSlot);

			/*
			 * Only MVCC snapshots are supported here, so there should be no
			 * need to keep following the HOT chain once a visible entry has
			 * been found.  If we did want to allow that, we'd need to keep
			 * more state to remember not to call index_getnext_tid next time.
			 */
			if (scandesc->xs_heap_continue)
				elog(ERROR, "non-MVCC snapshots are not supported in index-only scans");

			/*
			 * Note: at this point we are holding a pin on the heap page, as
			 * recorded in scandesc->xs_cbuf.  We could release that pin now,
			 * but it's not clear whether it's a win to do so.  The next index
			 * entry might require a visit to the same heap page.
			 */

			tuple_from_heap = true;
		}

		/*
		 * Fill the scan tuple slot with data from the index.  This might be
		 * provided in either HeapTuple or IndexTuple format.  Conceivably an
		 * index AM might fill both fields, in which case we prefer the heap
		 * format, since it's probably a bit cheaper to fill a slot from.
		 */
		if (scandesc->xs_hitup)
		{
			/*
			 * We don't take the trouble to verify that the provided tuple has
			 * exactly the slot's format, but it seems worth doing a quick
			 * check on the number of fields.
			 */
			Assert(slot->tts_tupleDescriptor->natts ==
				   scandesc->xs_hitupdesc->natts);
			ExecForceStoreHeapTuple(scandesc->xs_hitup, slot, false);
		}
		else if (scandesc->xs_itup)
			StoreIndexTuple(slot, scandesc->xs_itup, scandesc->xs_itupdesc);
		else
			elog(ERROR, "no data returned for index-only scan");

		/*
		 * If the index was lossy, we have to recheck the index quals.
		 * (Currently, this can never happen, but we should support the case
		 * for possible future use, eg with GiST indexes.)
		 */
		if (scandesc->xs_recheck)
		{
			econtext->ecxt_scantuple = slot;
			if (!ExecQualAndReset(node->indexqual, econtext))
			{
				/* Fails recheck, so drop it and loop back for another */
				InstrCountFiltered2(node, 1);
				continue;
			}
		}

		/*
		 * We don't currently support rechecking ORDER BY distances.  (In
		 * principle, if the index can support retrieval of the originally
		 * indexed value, it should be able to produce an exact distance
		 * calculation too.  So it's not clear that adding code here for
		 * recheck/re-sort would be worth the trouble.  But we should at least
		 * throw an error if someone tries it.)
		 */
		if (scandesc->numberOfOrderBys > 0 && scandesc->xs_recheckorderby)
			ereport(ERROR,
					(errcode(ERRCODE_FEATURE_NOT_SUPPORTED),
					 errmsg("lossy distance functions are not supported in index-only scans")));

		/*
		 * If we didn't access the heap, then we'll need to take a predicate
		 * lock explicitly, as if we had.  For now we do that at page level.
		 */
		if (!tuple_from_heap)
			PredicateLockPage(scandesc->heapRelation,
							  ItemPointerGetBlockNumber(tid),
							  estate->es_snapshot);

		return slot;
	}

	/*
	 * if we get here it means the index scan failed so we are at the end of
	 * the scan..
	 */
	return ExecClearTuple(slot);
}

/*
 * StoreIndexTuple
 *		Fill the slot with data from the index tuple.
 *
 * At some point this might be generally-useful functionality, but
 * right now we don't need it elsewhere.
 */
static void
StoreIndexTuple(TupleTableSlot *slot, IndexTuple itup, TupleDesc itupdesc)
{
	/*
	 * Note: we must use the tupdesc supplied by the AM in index_deform_tuple,
	 * not the slot's tupdesc, in case the latter has different datatypes
	 * (this happens for btree name_ops in particular).  They'd better have
	 * the same number of columns though, as well as being datatype-compatible
	 * which is something we can't so easily check.
	 */
	Assert(slot->tts_tupleDescriptor->natts == itupdesc->natts);

	ExecClearTuple(slot);
	index_deform_tuple(itup, itupdesc, slot->tts_values, slot->tts_isnull);
	ExecStoreVirtualTuple(slot);
}

/*
 * IndexOnlyRecheck -- access method routine to recheck a tuple in EvalPlanQual
 *
 * This can't really happen, since an index can't supply CTID which would
 * be necessary data for any potential EvalPlanQual target relation.  If it
 * did happen, the EPQ code would pass us the wrong data, namely a heap
 * tuple not an index tuple.  So throw an error.
 */
static bool
IndexOnlyRecheck(IndexOnlyScanState *node, TupleTableSlot *slot)
{
	elog(ERROR, "EvalPlanQual recheck is not supported in index-only scans");
	return false;				/* keep compiler quiet */
}

/* ----------------------------------------------------------------
 *		ExecIndexOnlyScan(node)
 * ----------------------------------------------------------------
 */
static TupleTableSlot *
ExecIndexOnlyScan(PlanState *pstate)
{
	IndexOnlyScanState *node = castNode(IndexOnlyScanState, pstate);

	/*
	 * If we have runtime keys and they've not already been set up, do it now.
	 */
	if (node->ioss_NumRuntimeKeys != 0 && !node->ioss_RuntimeKeysReady)
		ExecReScan((PlanState *) node);

	return ExecScan(&node->ss,
					(ExecScanAccessMtd) IndexOnlyNext,
					(ExecScanRecheckMtd) IndexOnlyRecheck);
}

/* ----------------------------------------------------------------
 *		ExecReScanIndexOnlyScan(node)
 *
 *		Recalculates the values of any scan keys whose value depends on
 *		information known at runtime, then rescans the indexed relation.
 *
 *		Updating the scan key was formerly done separately in
 *		ExecUpdateIndexScanKeys. Integrating it into ReScan makes
 *		rescans of indices and relations/general streams more uniform.
 * ----------------------------------------------------------------
 */
void
ExecReScanIndexOnlyScan(IndexOnlyScanState *node)
{
	/*
	 * If we are doing runtime key calculations (ie, any of the index key
	 * values weren't simple Consts), compute the new key values.  But first,
	 * reset the context so we don't leak memory as each outer tuple is
	 * scanned.  Note this assumes that we will recalculate *all* runtime keys
	 * on each call.
	 */
	if (node->ioss_NumRuntimeKeys != 0)
	{
		ExprContext *econtext = node->ioss_RuntimeContext;

		ResetExprContext(econtext);
		ExecIndexEvalRuntimeKeys(econtext,
								 node->ioss_RuntimeKeys,
								 node->ioss_NumRuntimeKeys);
	}
	node->ioss_RuntimeKeysReady = true;

	/* reset index scan */
	if (node->ioss_ScanDesc)
		index_rescan(node->ioss_ScanDesc,
					 node->ioss_ScanKeys, node->ioss_NumScanKeys,
					 node->ioss_OrderByKeys, node->ioss_NumOrderByKeys);

	ExecScanReScan(&node->ss);
}


/* ----------------------------------------------------------------
 *		ExecEndIndexOnlyScan
 * ----------------------------------------------------------------
 */
void
ExecEndIndexOnlyScan(IndexOnlyScanState *node)
{
	Relation	indexRelationDesc;
	IndexScanDesc indexScanDesc;

	/*
	 * extract information from the node
	 */
	indexRelationDesc = node->ioss_RelationDesc;
	indexScanDesc = node->ioss_ScanDesc;

	/* Release VM buffer pin, if any. */
	if (node->ioss_VMBuffer != InvalidBuffer)
	{
		ReleaseBuffer(node->ioss_VMBuffer);
		node->ioss_VMBuffer = InvalidBuffer;
	}

	/*
	 * Free the exprcontext(s) ... now dead code, see ExecFreeExprContext
	 */
#ifdef NOT_USED
	ExecFreeExprContext(&node->ss.ps);
	if (node->ioss_RuntimeContext)
		FreeExprContext(node->ioss_RuntimeContext, true);
#endif

	/*
	 * clear out tuple table slots
	 */
	if (node->ss.ps.ps_ResultTupleSlot)
		ExecClearTuple(node->ss.ps.ps_ResultTupleSlot);
	ExecClearTuple(node->ss.ss_ScanTupleSlot);

	/*
	 * close the index relation (no-op if we didn't open it)
	 */
	if (indexScanDesc)
		index_endscan(indexScanDesc);
	if (indexRelationDesc)
		index_close(indexRelationDesc, NoLock);
}

/* ----------------------------------------------------------------
 *		ExecIndexOnlyMarkPos
 *
 * Note: we assume that no caller attempts to set a mark before having read
 * at least one tuple.  Otherwise, ioss_ScanDesc might still be NULL.
 * ----------------------------------------------------------------
 */
void
ExecIndexOnlyMarkPos(IndexOnlyScanState *node)
{
	EState	   *estate = node->ss.ps.state;
	EPQState   *epqstate = estate->es_epq_active;

	if (epqstate != NULL)
	{
		/*
		 * We are inside an EvalPlanQual recheck.  If a test tuple exists for
		 * this relation, then we shouldn't access the index at all.  We would
		 * instead need to save, and later restore, the state of the
		 * relsubs_done flag, so that re-fetching the test tuple is possible.
		 * However, given the assumption that no caller sets a mark at the
		 * start of the scan, we can only get here with relsubs_done[i]
		 * already set, and so no state need be saved.
		 */
		Index		scanrelid = ((Scan *) node->ss.ps.plan)->scanrelid;

		Assert(scanrelid > 0);
		if (epqstate->relsubs_slot[scanrelid - 1] != NULL ||
			epqstate->relsubs_rowmark[scanrelid - 1] != NULL)
		{
			/* Verify the claim above */
			if (!epqstate->relsubs_done[scanrelid - 1])
				elog(ERROR, "unexpected ExecIndexOnlyMarkPos call in EPQ recheck");
			return;
		}
	}

	index_markpos(node->ioss_ScanDesc);
}

/* ----------------------------------------------------------------
 *		ExecIndexOnlyRestrPos
 * ----------------------------------------------------------------
 */
void
ExecIndexOnlyRestrPos(IndexOnlyScanState *node)
{
	EState	   *estate = node->ss.ps.state;
	EPQState   *epqstate = estate->es_epq_active;

	if (estate->es_epq_active != NULL)
	{
		/* See comments in ExecIndexMarkPos */
		Index		scanrelid = ((Scan *) node->ss.ps.plan)->scanrelid;

		Assert(scanrelid > 0);
		if (epqstate->relsubs_slot[scanrelid - 1] != NULL ||
			epqstate->relsubs_rowmark[scanrelid - 1] != NULL)
		{
			/* Verify the claim above */
			if (!epqstate->relsubs_done[scanrelid - 1])
				elog(ERROR, "unexpected ExecIndexOnlyRestrPos call in EPQ recheck");
			return;
		}
	}

	index_restrpos(node->ioss_ScanDesc);
}

/* ----------------------------------------------------------------
 *		ExecInitIndexOnlyScan
 *
 *		Initializes the index scan's state information, creates
 *		scan keys, and opens the base and index relations.
 *
 *		Note: index scans have 2 sets of state information because
 *			  we have to keep track of the base relation and the
 *			  index relation.
 * ----------------------------------------------------------------
 */
IndexOnlyScanState *
ExecInitIndexOnlyScan(IndexOnlyScan *node, EState *estate, int eflags)
{
	IndexOnlyScanState *indexstate;
	Relation	currentRelation;
	LOCKMODE	lockmode;
	TupleDesc	tupDesc;

	/*
	 * create state structure
	 */
	indexstate = makeNode(IndexOnlyScanState);
	indexstate->ss.ps.plan = (Plan *) node;
	indexstate->ss.ps.state = estate;
	indexstate->ss.ps.ExecProcNode = ExecIndexOnlyScan;

	/*
	 * Miscellaneous initialization
	 *
	 * create expression context for node
	 */
	ExecAssignExprContext(estate, &indexstate->ss.ps);

	/*
	 * open the scan relation
	 */
	currentRelation = ExecOpenScanRelation(estate, node->scan.scanrelid, eflags);

	indexstate->ss.ss_currentRelation = currentRelation;
	indexstate->ss.ss_currentScanDesc = NULL;	/* no heap scan here */

	/*
	 * Build the scan tuple type using the indextlist generated by the
	 * planner.  We use this, rather than the index's physical tuple
	 * descriptor, because the latter contains storage column types not the
	 * types of the original datums.  (It's the AM's responsibility to return
	 * suitable data anyway.)
	 */
	tupDesc = ExecTypeFromTL(node->indextlist);
	ExecInitScanTupleSlot(estate, &indexstate->ss, tupDesc,
						  &TTSOpsVirtual);

	/*
	 * We need another slot, in a format that's suitable for the table AM, for
	 * when we need to fetch a tuple from the table for rechecking visibility.
	 */
	indexstate->ioss_TableSlot =
		ExecAllocTableSlot(&estate->es_tupleTable,
						   RelationGetDescr(currentRelation),
						   table_slot_callbacks(currentRelation));

	/*
	 * Initialize result type and projection info.  The node's targetlist will
	 * contain Vars with varno = INDEX_VAR, referencing the scan tuple.
	 */
	ExecInitResultTypeTL(&indexstate->ss.ps);
	ExecAssignScanProjectionInfoWithVarno(&indexstate->ss, INDEX_VAR);

	/*
	 * initialize child expressions
	 *
	 * Note: we don't initialize all of the indexorderby expression, only the
	 * sub-parts corresponding to runtime keys (see below).
	 */
	indexstate->ss.ps.qual =
		ExecInitQual(node->scan.plan.qual, (PlanState *) indexstate);
	indexstate->indexqual =
		ExecInitQual(node->indexqual, (PlanState *) indexstate);

	/*
	 * If we are just doing EXPLAIN (ie, aren't going to run the plan), stop
	 * here.  This allows an index-advisor plugin to EXPLAIN a plan containing
	 * references to nonexistent indexes.
	 */
	if (eflags & EXEC_FLAG_EXPLAIN_ONLY)
		return indexstate;

	/* Open the index relation. */
	lockmode = exec_rt_fetch(node->scan.scanrelid, estate)->rellockmode;
	indexstate->ioss_RelationDesc = index_open(node->indexid, lockmode);

	/*
	 * Initialize index-specific scan state
	 */
	indexstate->ioss_RuntimeKeysReady = false;
	indexstate->ioss_RuntimeKeys = NULL;
	indexstate->ioss_NumRuntimeKeys = 0;

	/*
	 * build the index scan keys from the index qualification
	 */
	ExecIndexBuildScanKeys((PlanState *) indexstate,
						   indexstate->ioss_RelationDesc,
						   node->indexqual,
						   false,
						   &indexstate->ioss_ScanKeys,
						   &indexstate->ioss_NumScanKeys,
						   &indexstate->ioss_RuntimeKeys,
						   &indexstate->ioss_NumRuntimeKeys,
						   NULL,	/* no ArrayKeys */
						   NULL);

	/*
	 * any ORDER BY exprs have to be turned into scankeys in the same way
	 */
	ExecIndexBuildScanKeys((PlanState *) indexstate,
						   indexstate->ioss_RelationDesc,
						   node->indexorderby,
						   true,
						   &indexstate->ioss_OrderByKeys,
						   &indexstate->ioss_NumOrderByKeys,
						   &indexstate->ioss_RuntimeKeys,
						   &indexstate->ioss_NumRuntimeKeys,
						   NULL,	/* no ArrayKeys */
						   NULL);

	/*
	 * If we have runtime keys, we need an ExprContext to evaluate them. The
	 * node's standard context won't do because we want to reset that context
	 * for every tuple.  So, build another context just like the other one...
	 * -tgl 7/11/00
	 */
	if (indexstate->ioss_NumRuntimeKeys != 0)
	{
		ExprContext *stdecontext = indexstate->ss.ps.ps_ExprContext;

		ExecAssignExprContext(estate, &indexstate->ss.ps);
		indexstate->ioss_RuntimeContext = indexstate->ss.ps.ps_ExprContext;
		indexstate->ss.ps.ps_ExprContext = stdecontext;
	}
	else
	{
		indexstate->ioss_RuntimeContext = NULL;
	}

	/*
	 * all done.
	 */
	return indexstate;
}

/* ----------------------------------------------------------------
 *		Parallel Index-only Scan Support
 * ----------------------------------------------------------------
 */

/* ----------------------------------------------------------------
 *		ExecIndexOnlyScanEstimate
 *
 *		Compute the amount of space we'll need in the parallel
 *		query DSM, and inform pcxt->estimator about our needs.
 * ----------------------------------------------------------------
 */
void
ExecIndexOnlyScanEstimate(IndexOnlyScanState *node,
						  ParallelContext *pcxt)
{
	EState	   *estate = node->ss.ps.state;

	node->ioss_PscanLen = index_parallelscan_estimate(node->ioss_RelationDesc,
													  estate->es_snapshot);
	shm_toc_estimate_chunk(&pcxt->estimator, node->ioss_PscanLen);
	shm_toc_estimate_keys(&pcxt->estimator, 1);
}

/* ----------------------------------------------------------------
 *		ExecIndexOnlyScanInitializeDSM
 *
 *		Set up a parallel index-only scan descriptor.
 * ----------------------------------------------------------------
 */
void
ExecIndexOnlyScanInitializeDSM(IndexOnlyScanState *node,
							   ParallelContext *pcxt)
{
	EState	   *estate = node->ss.ps.state;
	ParallelIndexScanDesc piscan;

	piscan = shm_toc_allocate(pcxt->toc, node->ioss_PscanLen);
	index_parallelscan_initialize(node->ss.ss_currentRelation,
								  node->ioss_RelationDesc,
								  estate->es_snapshot,
								  piscan);
	shm_toc_insert(pcxt->toc, node->ss.ps.plan->plan_node_id, piscan);
	node->ioss_ScanDesc =
		index_beginscan_parallel(node->ss.ss_currentRelation,
								 node->ioss_RelationDesc,
								 node->ioss_NumScanKeys,
								 node->ioss_NumOrderByKeys,
								 piscan);
	node->ioss_ScanDesc->xs_want_itup = true;
	node->ioss_VMBuffer = InvalidBuffer;

	/*
	 * If no run-time keys to calculate or they are ready, go ahead and pass
	 * the scankeys to the index AM.
	 */
	if (node->ioss_NumRuntimeKeys == 0 || node->ioss_RuntimeKeysReady)
		index_rescan(node->ioss_ScanDesc,
					 node->ioss_ScanKeys, node->ioss_NumScanKeys,
					 node->ioss_OrderByKeys, node->ioss_NumOrderByKeys);
}

/* ----------------------------------------------------------------
 *		ExecIndexOnlyScanReInitializeDSM
 *
 *		Reset shared state before beginning a fresh scan.
 * ----------------------------------------------------------------
 */
void
ExecIndexOnlyScanReInitializeDSM(IndexOnlyScanState *node,
								 ParallelContext *pcxt)
{
	index_parallelrescan(node->ioss_ScanDesc);
}

/* ----------------------------------------------------------------
 *		ExecIndexOnlyScanInitializeWorker
 *
 *		Copy relevant information from TOC into planstate.
 * ----------------------------------------------------------------
 */
void
ExecIndexOnlyScanInitializeWorker(IndexOnlyScanState *node,
								  ParallelWorkerContext *pwcxt)
{
	ParallelIndexScanDesc piscan;

	piscan = shm_toc_lookup(pwcxt->toc, node->ss.ps.plan->plan_node_id, false);
	node->ioss_ScanDesc =
		index_beginscan_parallel(node->ss.ss_currentRelation,
								 node->ioss_RelationDesc,
								 node->ioss_NumScanKeys,
								 node->ioss_NumOrderByKeys,
								 piscan);
	node->ioss_ScanDesc->xs_want_itup = true;

	/*
	 * If no run-time keys to calculate or they are ready, go ahead and pass
	 * the scankeys to the index AM.
	 */
	if (node->ioss_NumRuntimeKeys == 0 || node->ioss_RuntimeKeysReady)
		index_rescan(node->ioss_ScanDesc,
					 node->ioss_ScanKeys, node->ioss_NumScanKeys,
					 node->ioss_OrderByKeys, node->ioss_NumOrderByKeys);
}