postgres/src/backend/executor/execScan.c

/*-------------------------------------------------------------------------
 *
 * execScan.c
 *	  This code provides support for generalized relation scans. ExecScan
 *	  is passed a node and a pointer to a function to "do the right thing"
 *	  and return a tuple from the relation. ExecScan then does the tedious
 *	  stuff - checking the qualification and projecting the tuple
 *	  appropriately.
 *
 * Portions Copyright (c) 1996-2017, PostgreSQL Global Development Group
 * Portions Copyright (c) 1994, Regents of the University of California
 *
 *
 * IDENTIFICATION
 *	  src/backend/executor/execScan.c
 *
 *-------------------------------------------------------------------------
 */
#include "postgres.h"

#include "executor/executor.h"
#include "miscadmin.h"
#include "utils/memutils.h"


static bool tlist_matches_tupdesc(PlanState *ps, List *tlist, Index varno, TupleDesc tupdesc);


/*
 * ExecScanFetch -- fetch next potential tuple
 *
 * This routine is concerned with substituting a test tuple if we are
 * inside an EvalPlanQual recheck.  If we aren't, just execute
 * the access method's next-tuple routine.
 */
static inline TupleTableSlot *
ExecScanFetch(ScanState *node,
			  ExecScanAccessMtd accessMtd,
			  ExecScanRecheckMtd recheckMtd)
{
	EState	   *estate = node->ps.state;

	if (estate->es_epqTuple != NULL)
	{
		/*
		 * We are inside an EvalPlanQual recheck.  Return the test tuple if
		 * one is available, after rechecking any access-method-specific
		 * conditions.
		 */
		Index		scanrelid = ((Scan *) node->ps.plan)->scanrelid;

		if (scanrelid == 0)
		{
			TupleTableSlot *slot = node->ss_ScanTupleSlot;

			/*
			 * This is a ForeignScan or CustomScan which has pushed down a
			 * join to the remote side.  The recheck method is responsible not
			 * only for rechecking the scan/join quals but also for storing
			 * the correct tuple in the slot.
			 */
			if (!(*recheckMtd) (node, slot))
				ExecClearTuple(slot);	/* would not be returned by scan */
			return slot;
		}
		else if (estate->es_epqTupleSet[scanrelid - 1])
		{
			TupleTableSlot *slot = node->ss_ScanTupleSlot;

			/* Return empty slot if we already returned a tuple */
			if (estate->es_epqScanDone[scanrelid - 1])
				return ExecClearTuple(slot);
			/* Else mark to remember that we shouldn't return more */
			estate->es_epqScanDone[scanrelid - 1] = true;

			/* Return empty slot if we haven't got a test tuple */
			if (estate->es_epqTuple[scanrelid - 1] == NULL)
				return ExecClearTuple(slot);

			/* Store test tuple in the plan node's scan slot */
			ExecStoreTuple(estate->es_epqTuple[scanrelid - 1],
						   slot, InvalidBuffer, false);

			/* Check if it meets the access-method conditions */
			if (!(*recheckMtd) (node, slot))
				ExecClearTuple(slot);	/* would not be returned by scan */

			return slot;
		}
	}

	/*
	 * Run the node-type-specific access method function to get the next tuple
	 */
	return (*accessMtd) (node);
}

/* ----------------------------------------------------------------
 *		ExecScan
 *
 *		Scans the relation using the 'access method' indicated and
 *		returns the next qualifying tuple in the direction specified
 *		in the global variable ExecDirection.
 *		The access method returns the next tuple and ExecScan() is
 *		responsible for checking the tuple returned against the qual-clause.
 *
 *		A 'recheck method' must also be provided that can check an
 *		arbitrary tuple of the relation against any qual conditions
 *		that are implemented internal to the access method.
 *
 *		Conditions:
 *		  -- the "cursor" maintained by the AMI is positioned at the tuple
 *			 returned previously.
 *
 *		Initial States:
 *		  -- the relation indicated is opened for scanning so that the
 *			 "cursor" is positioned before the first qualifying tuple.
 * ----------------------------------------------------------------
 */
TupleTableSlot *
ExecScan(ScanState *node,
		 ExecScanAccessMtd accessMtd,	/* function returning a tuple */
		 ExecScanRecheckMtd recheckMtd)
{
	ExprContext *econtext;
	ExprState  *qual;
	ProjectionInfo *projInfo;

	/*
	 * Fetch data from node
	 */
	qual = node->ps.qual;
	projInfo = node->ps.ps_ProjInfo;
	econtext = node->ps.ps_ExprContext;

	/*
	 * If we have neither a qual to check nor a projection to do, just skip
	 * all the overhead and return the raw scan tuple.
	 */
	if (!qual && !projInfo)
	{
		ResetExprContext(econtext);
		return ExecScanFetch(node, accessMtd, recheckMtd);
	}

	/*
	 * Reset per-tuple memory context to free any expression evaluation
	 * storage allocated in the previous tuple cycle.
	 */
	ResetExprContext(econtext);

	/*
	 * get a tuple from the access method.  Loop until we obtain a tuple that
	 * passes the qualification.
	 */
	for (;;)
	{
		TupleTableSlot *slot;

		CHECK_FOR_INTERRUPTS();

		slot = ExecScanFetch(node, accessMtd, recheckMtd);

		/*
		 * if the slot returned by the accessMtd contains NULL, then it means
		 * there is nothing more to scan so we just return an empty slot,
		 * being careful to use the projection result slot so it has correct
		 * tupleDesc.
		 */
		if (TupIsNull(slot))
		{
			if (projInfo)
				return ExecClearTuple(projInfo->pi_state.resultslot);
			else
				return slot;
		}

		/*
		 * place the current tuple into the expr context
		 */
		econtext->ecxt_scantuple = slot;

		/*
		 * check that the current tuple satisfies the qual-clause
		 *
		 * check for non-null qual here to avoid a function call to ExecQual()
		 * when the qual is null ... saves only a few cycles, but they add up
		 * ...
		 */
		if (qual == NULL || ExecQual(qual, econtext))
		{
			/*
			 * Found a satisfactory scan tuple.
			 */
			if (projInfo)
			{
				/*
				 * Form a projection tuple, store it in the result tuple slot
				 * and return it.
				 */
				return ExecProject(projInfo);
			}
			else
			{
				/*
				 * Here, we aren't projecting, so just return scan tuple.
				 */
				return slot;
			}
		}
		else
			InstrCountFiltered1(node, 1);

		/*
		 * Tuple fails qual, so free per-tuple memory and try again.
		 */
		ResetExprContext(econtext);
	}
}

/*
 * ExecAssignScanProjectionInfo
 *		Set up projection info for a scan node, if necessary.
 *
 * We can avoid a projection step if the requested tlist exactly matches
 * the underlying tuple type.  If so, we just set ps_ProjInfo to NULL.
 * Note that this case occurs not only for simple "SELECT * FROM ...", but
 * also in most cases where there are joins or other processing nodes above
 * the scan node, because the planner will preferentially generate a matching
 * tlist.
 *
 * ExecAssignScanType must have been called already.
 */
void
ExecAssignScanProjectionInfo(ScanState *node)
{
	Scan	   *scan = (Scan *) node->ps.plan;

	ExecAssignScanProjectionInfoWithVarno(node, scan->scanrelid);
}

/*
 * ExecAssignScanProjectionInfoWithVarno
 *		As above, but caller can specify varno expected in Vars in the tlist.
 */
void
ExecAssignScanProjectionInfoWithVarno(ScanState *node, Index varno)
{
	Scan	   *scan = (Scan *) node->ps.plan;

	if (tlist_matches_tupdesc(&node->ps,
							  scan->plan.targetlist,
							  varno,
							  node->ss_ScanTupleSlot->tts_tupleDescriptor))
		node->ps.ps_ProjInfo = NULL;
	else
		ExecAssignProjectionInfo(&node->ps,
								 node->ss_ScanTupleSlot->tts_tupleDescriptor);
}

static bool
tlist_matches_tupdesc(PlanState *ps, List *tlist, Index varno, TupleDesc tupdesc)
{
	int			numattrs = tupdesc->natts;
	int			attrno;
	bool		hasoid;
	ListCell   *tlist_item = list_head(tlist);

	/* Check the tlist attributes */
	for (attrno = 1; attrno <= numattrs; attrno++)
	{
		Form_pg_attribute att_tup = tupdesc->attrs[attrno - 1];
		Var		   *var;

		if (tlist_item == NULL)
			return false;		/* tlist too short */
		var = (Var *) ((TargetEntry *) lfirst(tlist_item))->expr;
		if (!var || !IsA(var, Var))
			return false;		/* tlist item not a Var */
		/* if these Asserts fail, planner messed up */
		Assert(var->varno == varno);
		Assert(var->varlevelsup == 0);
		if (var->varattno != attrno)
			return false;		/* out of order */
		if (att_tup->attisdropped)
			return false;		/* table contains dropped columns */

		/*
		 * Note: usually the Var's type should match the tupdesc exactly, but
		 * in situations involving unions of columns that have different
		 * typmods, the Var may have come from above the union and hence have
		 * typmod -1.  This is a legitimate situation since the Var still
		 * describes the column, just not as exactly as the tupdesc does. We
		 * could change the planner to prevent it, but it'd then insert
		 * projection steps just to convert from specific typmod to typmod -1,
		 * which is pretty silly.
		 */
		if (var->vartype != att_tup->atttypid ||
			(var->vartypmod != att_tup->atttypmod &&
			 var->vartypmod != -1))
			return false;		/* type mismatch */

		tlist_item = lnext(tlist_item);
	}

	if (tlist_item)
		return false;			/* tlist too long */

	/*
	 * If the plan context requires a particular hasoid setting, then that has
	 * to match, too.
	 */
	if (ExecContextForcesOids(ps, &hasoid) &&
		hasoid != tupdesc->tdhasoid)
		return false;

	return true;
}

/*
 * ExecScanReScan
 *
 * This must be called within the ReScan function of any plan node type
 * that uses ExecScan().
 */
void
ExecScanReScan(ScanState *node)
{
	EState	   *estate = node->ps.state;

	/* Rescan EvalPlanQual tuple if we're inside an EvalPlanQual recheck */
	if (estate->es_epqScanDone != NULL)
	{
		Index		scanrelid = ((Scan *) node->ps.plan)->scanrelid;

		if (scanrelid > 0)
			estate->es_epqScanDone[scanrelid - 1] = false;
		else
		{
			Bitmapset  *relids;
			int			rtindex = -1;

			/*
			 * If an FDW or custom scan provider has replaced the join with a
			 * scan, there are multiple RTIs; reset the epqScanDone flag for
			 * all of them.
			 */
			if (IsA(node->ps.plan, ForeignScan))
				relids = ((ForeignScan *) node->ps.plan)->fs_relids;
			else if (IsA(node->ps.plan, CustomScan))
				relids = ((CustomScan *) node->ps.plan)->custom_relids;
			else
				elog(ERROR, "unexpected scan node: %d",
					 (int) nodeTag(node->ps.plan));

			while ((rtindex = bms_next_member(relids, rtindex)) >= 0)
			{
				Assert(rtindex > 0);
				estate->es_epqScanDone[rtindex - 1] = false;
			}
		}
	}
}