CREATE INDEX CREATE INDEX 7 SQL - Language Statements CREATE INDEX define a new index CREATE [ UNIQUE ] INDEX [ CONCURRENTLY ] [ [ IF NOT EXISTS ] name ] ON [ ONLY ] table_name [ USING method ] ( { column_name | ( expression ) } [ COLLATE collation ] [ opclass ] [ ASC | DESC ] [ NULLS { FIRST | LAST } ] [, ...] ) [ WITH ( storage_parameter = value [, ... ] ) ] [ TABLESPACE tablespace_name ] [ WHERE predicate ] CREATE INDEX constructs an index on the specified column(s) of the specified relation, which can be a table or a materialized view. Indexes are primarily used to enhance database performance (though inappropriate use can result in slower performance). The key field(s) for the index are specified as column names, or alternatively as expressions written in parentheses. Multiple fields can be specified if the index method supports multicolumn indexes. An index field can be an expression computed from the values of one or more columns of the table row. This feature can be used to obtain fast access to data based on some transformation of the basic data. For example, an index computed on upper(col) would allow the clause WHERE upper(col) = 'JIM' to use an index. PostgreSQL provides the index methods B-tree, hash, GiST, SP-GiST, GIN, and BRIN. Users can also define their own index methods, but that is fairly complicated. When the WHERE clause is present, a partial index is created. A partial index is an index that contains entries for only a portion of a table, usually a portion that is more useful for indexing than the rest of the table. For example, if you have a table that contains both billed and unbilled orders where the unbilled orders take up a small fraction of the total table and yet that is an often used section, you can improve performance by creating an index on just that portion. Another possible application is to use WHERE with UNIQUE to enforce uniqueness over a subset of a table. See for more discussion. The expression used in the WHERE clause can refer only to columns of the underlying table, but it can use all columns, not just the ones being indexed. Presently, subqueries and aggregate expressions are also forbidden in WHERE. The same restrictions apply to index fields that are expressions. All functions and operators used in an index definition must be immutable, that is, their results must depend only on their arguments and never on any outside influence (such as the contents of another table or the current time). This restriction ensures that the behavior of the index is well-defined. To use a user-defined function in an index expression or WHERE clause, remember to mark the function immutable when you create it. UNIQUE Causes the system to check for duplicate values in the table when the index is created (if data already exist) and each time data is added. Attempts to insert or update data which would result in duplicate entries will generate an error. Additional restrictions apply when unique indexes are applied to partitioned tables; see . CONCURRENTLY When this option is used, PostgreSQL will build the index without taking any locks that prevent concurrent inserts, updates, or deletes on the table; whereas a standard index build locks out writes (but not reads) on the table until it's done. There are several caveats to be aware of when using this option — see . IF NOT EXISTS Do not throw an error if a relation with the same name already exists. A notice is issued in this case. Note that there is no guarantee that the existing index is anything like the one that would have been created. Index name is required when IF NOT EXISTS is specified. name The name of the index to be created. No schema name can be included here; the index is always created in the same schema as its parent table. If the name is omitted, PostgreSQL chooses a suitable name based on the parent table's name and the indexed column name(s). ONLY Indicates not to recurse creating indexes on partitions, if the table is partitioned. The default is to recurse. table_name The name (possibly schema-qualified) of the table to be indexed. method The name of the index method to be used. Choices are btree, hash, gist, spgist, gin, and brin. The default method is btree. column_name The name of a column of the table. expression An expression based on one or more columns of the table. The expression usually must be written with surrounding parentheses, as shown in the syntax. However, the parentheses can be omitted if the expression has the form of a function call. collation The name of the collation to use for the index. By default, the index uses the collation declared for the column to be indexed or the result collation of the expression to be indexed. Indexes with non-default collations can be useful for queries that involve expressions using non-default collations. opclass The name of an operator class. See below for details. ASC Specifies ascending sort order (which is the default). DESC Specifies descending sort order. NULLS FIRST Specifies that nulls sort before non-nulls. This is the default when DESC is specified. NULLS LAST Specifies that nulls sort after non-nulls. This is the default when DESC is not specified. storage_parameter The name of an index-method-specific storage parameter. See for details. tablespace_name The tablespace in which to create the index. If not specified, is consulted, or for indexes on temporary tables. predicate The constraint expression for a partial index. The optional WITH clause specifies storage parameters for the index. Each index method has its own set of allowed storage parameters. All indexes accept the following parameter: recheck_on_update Specifies whether to recheck a functional index value to see whether we can use a HOT update or not. The default value is on for functional indexes with an total expression cost less than 1000, otherwise off. You might decide to turn this off if you knew that a function used in an index is unlikely to return the same value when one of the input columns is updated and so the recheck is not worth the additional cost of executing the function. Functional indexes are used frequently for the case where the function returns a subset of the argument. Examples of this would be accessing part of a string with SUBSTR() or accessing a single field in a JSON document using an expression such as (bookinfo->>'isbn'). In this example, the JSON document might be updated frequently, yet it is uncommon for the ISBN field for a book to change so we would keep the parameter set to on for that index. A more frequently changing field might have an index with this parameter turned off, while very frequently changing fields might be better to avoid indexing at all under high load. The B-tree, hash, GiST and SP-GiST index methods all accept this parameter: fillfactor The fillfactor for an index is a percentage that determines how full the index method will try to pack index pages. For B-trees, leaf pages are filled to this percentage during initial index build, and also when extending the index at the right (adding new largest key values). If pages subsequently become completely full, they will be split, leading to gradual degradation in the index's efficiency. B-trees use a default fillfactor of 90, but any integer value from 10 to 100 can be selected. If the table is static then fillfactor 100 is best to minimize the index's physical size, but for heavily updated tables a smaller fillfactor is better to minimize the need for page splits. The other index methods use fillfactor in different but roughly analogous ways; the default fillfactor varies between methods. B-tree indexes additionally accept this parameter: vacuum_cleanup_index_scale_factor Per-table value for . GiST indexes additionally accept this parameter: buffering Determines whether the buffering build technique described in is used to build the index. With OFF it is disabled, with ON it is enabled, and with AUTO it is initially disabled, but turned on on-the-fly once the index size reaches . The default is AUTO. GIN indexes accept different parameters: fastupdate This setting controls usage of the fast update technique described in . It is a Boolean parameter: ON enables fast update, OFF disables it. (Alternative spellings of ON and OFF are allowed as described in .) The default is ON. Turning fastupdate off via ALTER INDEX prevents future insertions from going into the list of pending index entries, but does not in itself flush previous entries. You might want to VACUUM the table or call gin_clean_pending_list function afterward to ensure the pending list is emptied. gin_pending_list_limit Custom parameter. This value is specified in kilobytes. BRIN indexes accept different parameters: pages_per_range Defines the number of table blocks that make up one block range for each entry of a BRIN index (see for more details). The default is 128. autosummarize Defines whether a summarization run is invoked for the previous page range whenever an insertion is detected on the next one. index building concurrently Creating an index can interfere with regular operation of a database. Normally PostgreSQL locks the table to be indexed against writes and performs the entire index build with a single scan of the table. Other transactions can still read the table, but if they try to insert, update, or delete rows in the table they will block until the index build is finished. This could have a severe effect if the system is a live production database. Very large tables can take many hours to be indexed, and even for smaller tables, an index build can lock out writers for periods that are unacceptably long for a production system. PostgreSQL supports building indexes without locking out writes. This method is invoked by specifying the CONCURRENTLY option of CREATE INDEX. When this option is used, PostgreSQL must perform two scans of the table, and in addition it must wait for all existing transactions that could potentially modify or use the index to terminate. Thus this method requires more total work than a standard index build and takes significantly longer to complete. However, since it allows normal operations to continue while the index is built, this method is useful for adding new indexes in a production environment. Of course, the extra CPU and I/O load imposed by the index creation might slow other operations. In a concurrent index build, the index is actually entered into the system catalogs in one transaction, then two table scans occur in two more transactions. Before each table scan, the index build must wait for existing transactions that have modified the table to terminate. After the second scan, the index build must wait for any transactions that have a snapshot (see ) predating the second scan to terminate. Then finally the index can be marked ready for use, and the CREATE INDEX command terminates. Even then, however, the index may not be immediately usable for queries: in the worst case, it cannot be used as long as transactions exist that predate the start of the index build. If a problem arises while scanning the table, such as a deadlock or a uniqueness violation in a unique index, the CREATE INDEX command will fail but leave behind an invalid index. This index will be ignored for querying purposes because it might be incomplete; however it will still consume update overhead. The psql \d command will report such an index as INVALID: postgres=# \d tab Table "public.tab" Column | Type | Collation | Nullable | Default --------+---------+-----------+----------+--------- col | integer | | | Indexes: "idx" btree (col) INVALID The recommended recovery method in such cases is to drop the index and try again to perform CREATE INDEX CONCURRENTLY. (Another possibility is to rebuild the index with REINDEX. However, since REINDEX does not support concurrent builds, this option is unlikely to seem attractive.) Another caveat when building a unique index concurrently is that the uniqueness constraint is already being enforced against other transactions when the second table scan begins. This means that constraint violations could be reported in other queries prior to the index becoming available for use, or even in cases where the index build eventually fails. Also, if a failure does occur in the second scan, the invalid index continues to enforce its uniqueness constraint afterwards. Concurrent builds of expression indexes and partial indexes are supported. Errors occurring in the evaluation of these expressions could cause behavior similar to that described above for unique constraint violations. Regular index builds permit other regular index builds on the same table to occur in parallel, but only one concurrent index build can occur on a table at a time. In both cases, no other types of schema modification on the table are allowed meanwhile. Another difference is that a regular CREATE INDEX command can be performed within a transaction block, but CREATE INDEX CONCURRENTLY cannot. See for information about when indexes can be used, when they are not used, and in which particular situations they can be useful. Currently, only the B-tree, GiST, GIN, and BRIN index methods support multicolumn indexes. Up to 32 fields can be specified by default. (This limit can be altered when building PostgreSQL.) Only B-tree currently supports unique indexes. An operator class can be specified for each column of an index. The operator class identifies the operators to be used by the index for that column. For example, a B-tree index on four-byte integers would use the int4_ops class; this operator class includes comparison functions for four-byte integers. In practice the default operator class for the column's data type is usually sufficient. The main point of having operator classes is that for some data types, there could be more than one meaningful ordering. For example, we might want to sort a complex-number data type either by absolute value or by real part. We could do this by defining two operator classes for the data type and then selecting the proper class when making an index. More information about operator classes is in and in . When CREATE INDEX is invoked on a partitioned table, the default behavior is to recurse to all partitions to ensure they all have matching indexes. Each partition is first checked to determine whether an equivalent index already exists, and if so, that index will become attached as a partition index to the index being created, which will become its parent index. If no matching index exists, a new index will be created and automatically attached; the name of the new index in each partition will be determined as if no index name had been specified in the command. If the ONLY option is specified, no recursion is done, and the index is marked invalid (ALTER INDEX ... ATTACH PARTITION turns the index valid, once all partitions acquire the index.) Note, however, that any partition that is created in the future using CREATE TABLE ... PARTITION OF will automatically contain the index regardless of whether this option was specified. For index methods that support ordered scans (currently, only B-tree), the optional clauses ASC, DESC, NULLS FIRST, and/or NULLS LAST can be specified to modify the sort ordering of the index. Since an ordered index can be scanned either forward or backward, it is not normally useful to create a single-column DESC index — that sort ordering is already available with a regular index. The value of these options is that multicolumn indexes can be created that match the sort ordering requested by a mixed-ordering query, such as SELECT ... ORDER BY x ASC, y DESC. The NULLS options are useful if you need to support nulls sort low behavior, rather than the default nulls sort high, in queries that depend on indexes to avoid sorting steps. For most index methods, the speed of creating an index is dependent on the setting of . Larger values will reduce the time needed for index creation, so long as you don't make it larger than the amount of memory really available, which would drive the machine into swapping. PostgreSQL can build indexes while leveraging multiple CPUs in order to process the table rows faster. This feature is known as parallel index build. For index methods that support building indexes in parallel (currently, only B-tree), maintenance_work_mem specifies the maximum amount of memory that can be used by each index build operation as a whole, regardless of how many worker processes were started. Generally, a cost model automatically determines how many worker processes should be requested, if any. Parallel index builds may benefit from increasing maintenance_work_mem where an equivalent serial index build will see little or no benefit. Note that maintenance_work_mem may influence the number of worker processes requested, since parallel workers must have at least a 32MB share of the total maintenance_work_mem budget. There must also be a remaining 32MB share for the leader process. Increasing may allow more workers to be used, which will reduce the time needed for index creation, so long as the index build is not already I/O bound. Of course, there should also be sufficient CPU capacity that would otherwise lie idle. Setting a value for parallel_workers via directly controls how many parallel worker processes will be requested by a CREATE INDEX against the table. This bypasses the cost model completely, and prevents maintenance_work_mem from affecting how many parallel workers are requested. Setting parallel_workers to 0 via ALTER TABLE will disable parallel index builds on the table in all cases. You might want to reset parallel_workers after setting it as part of tuning an index build. This avoids inadvertent changes to query plans, since parallel_workers affects all parallel table scans. While CREATE INDEX with the CONCURRENTLY option supports parallel builds without special restrictions, only the first table scan is actually performed in parallel. Use to remove an index. Prior releases of PostgreSQL also had an R-tree index method. This method has been removed because it had no significant advantages over the GiST method. If USING rtree is specified, CREATE INDEX will interpret it as USING gist, to simplify conversion of old databases to GiST. To create a B-tree index on the column title in the table films: CREATE UNIQUE INDEX title_idx ON films (title); To create an index on the expression lower(title), allowing efficient case-insensitive searches: CREATE INDEX ON films ((lower(title))); (In this example we have chosen to omit the index name, so the system will choose a name, typically films_lower_idx.) To create an index with non-default collation: CREATE INDEX title_idx_german ON films (title COLLATE "de_DE"); To create an index with non-default sort ordering of nulls: CREATE INDEX title_idx_nulls_low ON films (title NULLS FIRST); To create an index with non-default fill factor: CREATE UNIQUE INDEX title_idx ON films (title) WITH (fillfactor = 70); To create a GIN index with fast updates disabled: CREATE INDEX gin_idx ON documents_table USING GIN (locations) WITH (fastupdate = off); To create an index on the column code in the table films and have the index reside in the tablespace indexspace: CREATE INDEX code_idx ON films (code) TABLESPACE indexspace; To create a GiST index on a point attribute so that we can efficiently use box operators on the result of the conversion function: CREATE INDEX pointloc ON points USING gist (box(location,location)); SELECT * FROM points WHERE box(location,location) && '(0,0),(1,1)'::box; To create an index without locking out writes to the table: CREATE INDEX CONCURRENTLY sales_quantity_index ON sales_table (quantity); CREATE INDEX is a PostgreSQL language extension. There are no provisions for indexes in the SQL standard.